CS Paper Radar

Adversarial Calibration Attack on Autonomous Vehicles

Liangkai Liu, Qingzhao Zhang, Kang G. Shin

cs.RO cs.CVcs.ETcs.LGeess.SY ·submitted 2026-08-28 18:35 UTC · v1
benchmark

Abstract

Autonomous vehicles (AVs) rely on accurate camera-LiDAR calibration for multimodal sensor fusion. In practice, calibration can drift due to vibration, temperature variation, or minor sensor displacement, motivating online calibration algorithms that detect and correct misalignment at runtime while allowing the vehicle to continue operating without a factory visit. Existing AV attacks largely assume correct calibration. We instead identify online sensor calibration as a new attack plane. A corrupted calibration update can persist across subsequent fusion operations, causing system-wide errors that propagate from perception to planning and control. We present Adversarial Calibration Attack (ACA), the first physical attack against camera-LiDAR online calibration. Using a single adversarial poster, ACA first spoofs the miscalibration detector to trigger the calibration process and then steers the calibration estimator toward an incorrect transformation. A unified optimization jointly designs the poster's geometry and texture for both objectives. We evaluate ACA across benchmark datasets, simulation, and physical experiments. On benchmark datasets such as KITTI and nuScenes, ACA induces up to 33.9 degrees mean rotational calibration error, thereby severely degrading object detection. In the CARLA simulator, the attack causes a collision when the corrupted calibration is accepted in vulnerable scenarios crafted by the attacker. On a real Husky robot, a printed adversarial poster successfully reproduces the calibration error. These results demonstrate that online calibration is a practical and safety-critical attack surface for AVs.

Comment
19 pages, 8 figures

Closest papers

Nearest neighbours by meaning across the whole index.

LiDAR-SHIELD: A Fully Dockerized Adversarial Robustness Assessment Framework for LiDAR-Based 3D Perception Models

cs.CV cs.AI ·2026-10-29 ·Alexandros Gkillas, Ioulia Kapsali, Christos Anagnostopoulos, Aris S. Lalos
code/data similarity 0.72
Abstract

LiDAR-based 3D perception underpins autonomous driving and robotics, yet deploying these models safely requires stress-testing them against adversarial inputs before real-world use. Although state-of-the-art adversarial attacks exist, their implementations are often fragmented across individual repositories, each tied to a specific architecture or task and requiring manual environment reconstruction and model-specific integration code. We present LIDARSHIELD, a unified and fully Dockerized framework that reverses this workflow: rather than installing the target model inside the toolkit, LIDARSHIELD exposes any model through three lightweight HTTP endpoints, namely /info, /forward, and /gradient As a result, connecting a new model or dataset requires only a single loader function or adapter. The framework supports both 3D semantic segmentation and 3D object detection through the same engine-service protocol, integrating a task-aware suite of state-of-the-art attacks, including PGD and Square Attack for segmentation, and point perturbation, point removal, point injection, and LiDAttack for detection. This enables systematic exposure of corner cases and vulnerabilities across heterogeneous LiDAR backbones. The LiDAR-Shield codebase is publicly available at https://github.com/alexandrosgk/LiDAR-shield.

0.31

Adversarial Robustness of Camera-Radar Sensor Fusion for Autonomous Driving

cs.CR cs.CV ·2026-10-12 ·Ce Zhou, Yubo Wu, Khang Nguyen, Liyang Xiao, Thomas Hou +1 more
similarity 0.72
Abstract · 25 pages

Autonomous driving (AD) relies on multi-sensor perception to interpret the surrounding environment. However, the robustness of camera--radar fusion under adversarial conditions remains largely unexplored. This paper presents a systematic measurement study of the robustness of camera--radar sensor fusion in AD. We construct a unified evaluation pipeline on the nuScenes dataset that simulates attacks on both sensing modalities, including eight camera-image perturbations and three radar point-cloud perturbations. We evaluate five camera--radar fusion algorithms across two perception tasks, 3D object detection and depth estimation, and quantify their performance under clean and attacked inputs using standard metrics. Our evaluation reveals a clear asymmetry in the robustness of fusion systems. Camera perturbations substantially degrade both object detection and depth estimation, and moderate attack strengths are already sufficient to cause severe performance degradation. In contrast, the evaluated radar perturbations produce smaller and task-dependent effects, with object-detection models showing particularly limited degradation. Our analysis attributes this difference to the strong dependence of existing fusion architectures on dense camera features, together with the filtering, association, and confidence-weighting mechanisms commonly applied to sparse radar measurements. These results demonstrate that sensor fusion does not inherently guarantee robustness and that the contribution and reliability of each sensing modality must be explicitly considered under adversarial conditions. Based on four empirical findings, we derive measurement-guided design implications for future robust camera--radar fusion, including modality-specific reliability estimation, cross-modal consistency checking, adaptive fusion, and graceful failover under severe sensor degradation.

0.15

MiCaDe: Online LiDAR-Camera Miscalibration Change Detection for Autonomous Driving

cs.CV cs.LG ·2026-11-03 ·Carlo Sgaravatti, Riccardo Pieroni, Matteo Corno, Sergio M. Savaresi, Luca Magri +1 more
code/datahot direction similarity 0.70
Abstract

Reliable multi-sensor perception in autonomous vehicles requires accurate calibration between cameras and LiDAR. However, calibration drift is often unavoidable in long-term deployments: vibrations, thermal effects, and minor mechanical shocks may alter the relative pose between sensors, leading to systematic errors in downstream fusion tasks. We propose MiCaDe (Miscalibration Change Detection), an online solution detecting when the extrinsic LiDAR-camera calibration parameters are no longer accurate by means of sequential change detection. MiCaDe requires no calibration targets, or modification of the perception stack, providing low false-alarm rates with negligible computational overhead. Our key insight is that 3D and 2D bounding boxes produced by standard object detectors should remain geometrically consistent under correct calibration. By matching cross-modal detections, we derive geometric consistency metrics that serve as sensitive indicators of extrinsic drift. These metrics are aggregated into fixed-size batches and scored against a reference distribution, producing a likelihood stream that is monitored by a Change Point Model (CPM). Crucially, the CPM accumulates statistical evidence over time, enabling detection of subtle drifts that would otherwise go unnoticed. Experiments on multiple long-sequence datasets and on a real-world dataset with physically induced miscalibration confirm reliable detection under diverse conditions. Code available at: https://github.com/CarloSgaravatti/MiCaDe.

0.35

Investigating Adversarial Robustness of Heterogeneous Cooperative Perception

cs.CV cs.CRcs.MAcs.RO ·2026-09-15 ·Chenyi Wang, Yutong Liu, Qingzhao Zhang, Ming F. Li
similarity 0.69
Abstract

Heterogeneous cooperative perception (CP) enables connected vehicles with diverse sensor setups to share spatial awareness via compact feature maps, where receivers reconcile these maps using learned translation modules for fusion and inference. Prior attacks against CP in a homogeneous setting reveal that the data exchange introduces a critical attack surface: a single malicious agent can transmit crafted features that erase real objects from a neighbor's fused scene. Yet, it is widely hypothesized that heterogeneity naturally defends against these attacks, as the attacker lacks knowledge of the victim's detector and the translation module scrambles adversarial gradients. We demonstrate that this protection is largely an illusion. Using a matched-objective harness to standardize the perturbation budget, objective, and forward path, we show that properly tuned iterative attacks close or reverse the apparent robustness gap. However, these optimization-based attacks require ground-truth labels and iterative backpropagation, meaning they do not represent a practical field threat running in real-time. To bridge this gap, we introduce HetPoison, a learned generator that crafts a removal perturbation in a single, label-free forward pass. HetPoison transfers across major heterogeneous designs without requiring access to the victim's detector, matching or exceeding the effectiveness of expensive optimizer-based attacks. Since heterogeneity itself is not a defense, we propose HetShield, a lightweight trust layer that validates the spatiotemporal consistency across features, recovering 83--95% of the accuracy degraded by attacks, outperforming prior art.

0.11

AdROD: HyperNetwork-based Adversarially Robust Object Detection for Autonomous Driving

cs.LG cs.CV ·2026-08-17 ·Yuting Wu, Dongfang Guo, Xiangzhong Luo, Qun Song, Rui Tan
similarity 0.69
Abstract

Camera-based object detectors are vulnerable to physical adversarial attacks designed to suppress detections. While adversarial training and input purification offer some protection, they often overfit to specific attack distributions and fail on adaptive adversaries. This paper presents AdROD, an embedded, stochastic ensemble defense software designed for autonomous driving. AdROD employs {\em low-rank HyperNetworks}, which require only 1.6\% of the parameter footprint of standard HyperNetworks, to generate diverse detectors at a per-frame rate, making it impractical for attackers to obtain the deployed detectors in time. To further improve adversarial robustness, AdROD incorporates a novel \emph{functional diversity} mechanism, which couples stochastic weight updates with unique input-space transformations. We design two serving modes of AdROD that strike different trade-offs between robustness and runtime overhead: AdROD-I, a continuous protection mode for maximum resilience that leverages inter-detector disagreement to recover compromised detections, and AdROD-II, an on-demand mode triggered by kinematic discontinuities in object tracking. Through comprehensive evaluation with synthetic benchmarks, physically deployed adversarial patches, and end-to-end safety tests in the OpenCDA co-simulator, AdROD outperforms five baseline defenses and exhibits superior generalizability compared with the evaluated adversarial-training baselines, while maintaining real-time performance for safely stopping the vehicle at a stop sign instrumented with adversarial patches.

0.11

Across Viewpoints and Time: Trajectory-Generalizable Physical Attacks on World Models and Video Understanding Models

cs.CV cs.AI ·2026-10-11 ·Song Xia, Meiwen Ding, Chenqi Kong, Wenhan Yang, Xudong Jiang
code/data similarity 0.68
Abstract · Project page: https://xiasong0501.github.io/TARA/

World models and video understanding models are increasingly deployed in dynamic visual environments, yet their robustness to physical adversarial threats remains largely underexplored. We study whether a single physical adversarial texture can mislead the victim model across different real-world scenarios where observing viewpoints vary along uncontrolled object--camera trajectories. We identify that heterogeneous video semantics and trajectories induce poorly aligned gradients for optimizing the adversarial texture. To address that, we propose the Trajectory-aware adversarial Alignment and Refinement Attack (TARA), which incorporates trajectory-aware optimization to capture the evolving geometric variations of a printed texture under real-world scenarios. To improve cross-instance optimization compatibility, TARA incorporates trajectory-aware contrastive alignment to encourage attacked representations from diverse video--trajectory instances to approach a shared adversarial region and then performs trajectory-aware task refinement to translate the aligned representation into task-level prediction errors. For reproducible evaluation, we develop a geometry-grounded tracking pipeline that provides physically plausible adversarial regions with temporally consistent trajectories on EPIC-KITCHENS-100 and Something-Something V2. We further collect real-world print-and-recapture videos to validate attack effectiveness under physical deployment conditions. Together, the annotated benchmarks and real-world captured data form a reproducible testbed for future evaluation. Notably, our results reveal that a single printable adversarial texture can persistently disrupt world models and video understanding models under physical conditions, highlighting the fundamental security challenge.

0.30

VIPA: View-Invariant Projector-Based Adversarial Attack

cs.CV ·2026-11-05 ·Jiyu Han, Qingyue Deng, Bingyao Huang
published similarity 0.67
Abstract · 16 pages, 12 figures

Projector-based adversarial attack aims to physically manipulate real-world scenes by projecting adversarial patterns, thereby causing deep image classifiers to produce incorrect predictions. However, existing stealthy projector-based adversarial attack methods model the project-and-capture process in a single and static view, limiting their view-invariant capability and practical applicability in dynamic environments. In this paper, we introduce View-Invariant Projector-Based Adversarial Attack (VIPA), a novel method designed to overcome these limitations by achieving both view-invariant and classifier-agnostic adversarial attacks in the physical world. We first leverage a view-invariant projector-camera system simulation method to model the physical interactions between projected patterns and real-world surfaces. To ensure robustness and stealthiness of the attack across different views, VIPA optimizes adversarial projections by aggregating simulated attack losses from multiple views. This joint optimization across diverse views helps maintain robustness regardless of the viewpoints. Finally, the optimized patterns are physically projected into real-world scenes, where they successfully fool various classifiers from different viewpoints, thereby enabling robust and practical view-invariant adversarial attacks. Our experiments in both targeted and untargeted attacks demonstrate that VIPA consistently achieves higher attack success rates than existing methods, while also enhancing stealthiness and ensuring minimal perceptual degradation across all tested views.

0.18

SynCalib: Breaking Dataset Shortcuts in LiDAR-Camera Calibration via Extrinsic-Controllable Synthesis

cs.CV cs.RO ·2026-10-20 ·Huihua Zhu, Shuyang Zhang, Dongqing Chen, Zhuo Yu, Jianhao Jiao +4 more
benchmarkcode/data similarity 0.67
Abstract · 8 pages, 6 figures

Online LiDAR-camera calibration remains a fundamental yet challenging task in the field of robotics. Recently, deep learning-based data-driven approaches have emerged, offering high-precision, targetless calibration capabilities. However, existing methods often suffer from a critical dataset shortcut phenomenon due to the lack of extrinsic diversity in their training data. Networks tend to overfit to fixed nominal extrinsic configurations, leading to severe performance degradation and poor generalization in real-world deployments. To address this limitation, we propose a highly generalizable data generation framework tailored for training LiDAR-camera calibration networks. Our framework leverages existing omnidirectional image datasets annotated with depth ground truth to synthesize multi-modal calibration data under rigorous extrinsic constraints. Extensive experiments demonstrate that the data generated by our pipeline significantly enhances the generalization and robustness of typical learning-based calibration networks. Furthermore, we conduct comprehensive real-world evaluations across various camera-LiDAR configurations, validating the zero-shot transfer capability of models trained exclusively on our synthetic data. To facilitate future research and community use, the code for data generation, the pre-trained models, and online benchmark datasets will be made publicly available.

0.25