CS Paper Radar

APPSolver: Adaptive Patch Partitioning for Point-Wise Ship Flow Prediction on Unstructured Meshes

Wenhua Huo, Fenglei Han, Wangyuan Zhao, Xiao Peng, Chunhui Wang, Jialin Wu, Jiayi Han

cs.AI cs.LG ·submitted 2026-08-29 16:23 UTC · v1
code/data

Abstract

Large non-uniform point sets make direct attention-based surrogate modeling costly for ship hydrodynamics. We introduce APPSolver, a point-wise flow-prediction framework built around Adaptive Patch Partitioning (APP), a deterministic quadtree representation for fixed two-dimensional horizontal slices extracted from ship CFD simulations. APP assigns finer patches near the hull and coarser patches farther away, downsamples patch contents, and recovers predictions to the full reference point set. Under a corrected protocol that constructs natural $(t,t+1)$ pairs before splitting, reuses training-set normalization statistics, and reports three model seeds, learned tokenizers are more accurate than APP-Transformer, and a persistence baseline has lower one-step MAE on all three ShipBench hulls. The supported benefit of APP is therefore computational rather than universal predictive superiority: on a representative DTC input, APP-Transformer requires 1.815 GFLOPs and 1.309 ms per model forward, while a matched ablation shows that adaptive partitioning reduces MAE by 16.4-24.9\% relative to a uniform partition augmented with learned slicing. Condition encoders provide setting-dependent gains in leave-one-hull-out evaluation, but the current absolute next-state objective does not establish accurate long-horizon dynamics. These results characterize APP as a compact spatial representation with an explicit accuracy--efficiency trade-off. Code is available at https://github.com/wenhuahuo/APPSolver .

Comment
14 pages, 2 figures. Code: https://github.com/wenhuahuo/APPSolver

Closest papers

Nearest neighbours by meaning across the whole index.

A Model-Agnostic Physics-Guided Adapter for Few-Shot Transfer of Coastal Flood Prediction Models to Unseen Regions

cs.LG ·2026-09-29 ·Bilal Hassan, Areg Karapetyan, Samer Madanat
similarity 0.64
Abstract

Deep learning surrogates can produce high-resolution coastal flood maps orders of magnitude faster than physics-based hydrodynamic simulators, yet transferring them to new coastal regions remains costly, since generating target-region data for fine-tuning typically requires numerous time-consuming simulations. To tackle this bottleneck, we introduce the Physics Adapter (PA), a compact, architecture-agnostic adaptation interface that enables efficient few-shot transfer of flood prediction models across diverse coastal regions. PA predicts peak water level through a differentiable wet/dry response that compares terrain elevation against a learned water level, and blends this physics-structured prediction with a data-driven branch through a learned gate. Unlike physics-informed formulations, PA imposes no PDE-residual or conservation losses and instead exploits elevation as an architectural inductive bias, adding a negligible number of trainable parameters. We integrate PA into 12 heterogeneous models, and evaluate them on two coastal regions with markedly distinct geometries, topographies, and shoreline protection configurations. The performance of PA is benchmarked against a no-physics baseline, full fine-tuning, and standard parameter-efficient fine-tuning (PEFT) methods, considering both within-region generalization to unseen sea level rise values and between-region transfer. In low-shot regime (K=3), and averaged over all backbones and transfer settings, adding PA reduces root mean square error by 11.5% when only the output head is adapted on a frozen backbone, by 15.4% when combined with PEFT methods, and by 22.9% under full fine-tuning, compared to matched configurations without PA. Taken together, the findings of this work offer practitioners a concrete recipe for extending DL-based coastal flood predictors to new, data-scarce regions.

0.26

Dynamic Quadtree Tokenization and Transformer for Adaptive Mesh PDE Forecasting

cs.CV cs.LG ·2026-10-02 ·Yilin Zhuang, Noah Zambrano, Karthik Duraisamy
code/data similarity 0.61
Abstract

The quadratic attention cost of Vision Transformers (ViTs) forces a trade-off between spatial resolution and rollout horizon, particularly for fine-scale PDEs where shocks, reaction fronts, and material interfaces occupy small, evolving regions of the domain. Conventional neural surrogates also lack mechanisms to adapt resolution dynamically. We propose WAMRViT, a ViT that tokenizes inputs as balanced quadtrees using a wavelet-inspired refinement criterion, jointly encodes position and refinement level with 3D rotary positional embeddings, and regrids in cell space during inference for stable long-horizon rollouts. A multi-scale variant retains each leaf at its native source resolution and lets the model learn across resolution levels. Unlike fixed-budget adaptive-tokenization methods, WAMRViT imposes no predetermined token count and supports fully adaptive topology throughout autoregressive rollout. To our knowledge, it is the first machine-learning surrogate to natively tokenize multi-level Adaptive Mesh Refinement (AMR) data. On uniform-grid benchmarks, uniform-patch WAMRViT improves finest-level region-of-interest VRMSE over a finest-patch uniform ViT while using substantially fewer tokens. The multi-scale variant achieves the lowest first-step full-field RMSE and VRMSE on both benchmarks and improves rollout-averaged full-field and refined-region accuracy at long horizons. With parallelized regridding, its end-to-end rollout cost lies between finest-patch and approximately token-matched coarser-patch ViTs. On a complex AMR combustion problem whose finest features cannot be represented natively by the evaluated uniform-grid baselines, WAMRViT operates on adaptive cells built from the simulator hierarchy and substantially reduces finest-level error at matched transformer capacity. Code: https://github.com/tonyzyl/wamrvit

0.39

Scenario Generalization and Sector Transfer in Real Surface Irrigation Surrogate Modelling with Tabular Models

cs.LG ·2026-10-19 ·Alessandro Cagiano, M. Aybars Seyhan, Fabiola Gangi, Matteo Zignani, Daniele Masseroni
similarity 0.60
Abstract · Accepted at MACLEAN 2026 (Workshop on Machine Learning for Earth Observation), held in conjunction with ECML PKDD 2026

Surface irrigation planning requires screening many operating conditions and spatial configurations, while high-fidelity shallow-water-equation (SWE) simulations are expensive. We study tabular surrogate models for predicting maximum water height from drone-derived field morphology, terrain, hydrological, spatial, and scenario descriptors, where each row represents a spatial cell under one irrigation scenario. To assess deployment feasibility, we evaluate gradient-boosted trees, neural tabular models, AutoML, and tabular foundation models (TFMs) under two regimes: same-sector generalization, where a model predicts unseen scenarios after observing a limited set of configurations in the same sector, and sector-out transfer, where knowledge learned from source sectors is transferred to an unseen sector. The main findings are twofold: a) under the evaluated fixed 8/32 same-sector split, surrogates achieve strong performance, especially with raw spatial coordinates; b) sector-out transfer is substantially harder because the target sector has different coordinates and geometry. Sector-frame normalization of spatial coordinates improves transfer across similarly structured sectors, but does not solve cross-shape generalization. Overall, tabular surrogates appear useful for same-sector scenario screening under this fixed split, while robust transfer to unseen sectors remains open.

0.28

Localized Generative Design of Ship Hulls with Diffusion Models and High-Fidelity Assessment

cs.AI math.APmath-ph ·2026-10-09 ·Hadi Keramati, Mohammed A. Hannan, Patrick Kirchen, Sina Tousi, Joonas Riekkinen +2 more
benchmark similarity 0.60
Abstract

Practical ship design requires localized refinement and performance evaluation. This paper presents a reward-directed diffusion framework for localized hull optimization. Parametric masking during dataset generation restricts geometric changes to selected variables, including the bulbous bow and forebody, while preserving full-hull continuity. Surrogate-assisted sequential Monte Carlo sampling targets reduced predicted calm-water resistance, with stability retained through training data and displacement matched during screening. An automated viscous free-surface CFD pipeline, validated against measurements for two benchmark container ships, evaluates a generated variant and GenHull E, a hull refined by a naval architect within the same representation. At matched KRISO Container Ship (KCS) displacement, the generated variant has comparable total resistance at $F_n=0.195$ but 45-50% higher resistance at $F_n=0.250$ and $0.260$, missed by empirical screening. GenHull E achieves 6-8% lower total resistance up to $F_n=0.240$ but higher resistance above $F_n=0.250$ as opposing friction and pressure trends reverse the gains. Aggregating resistance across this crossover can conceal tradeoffs that emerge when friction and pressure components are evaluated separately. The assessment reveals an inability to represent a faired bulbous bow and a reward lacking viscous pressure and stability terms. These findings show how high-fidelity assessment informs improved representations and objectives for physically realizable generative designs.

0.24

Comparative study of global pooling for pre-departure ship fuel consumption prediction: Advantages over per-ship and adaptation-based approaches

cs.LG cs.AI ·2026-11-02 ·Heungjun Im, Bongmin Cha, Agung Nugraha, Donghyun Kim, Seongphil Kang +3 more
similarity 0.60
Abstract · 34 pages, 11 figures, 19 tables

Most fuel oil consumption (FOC) models for voyage planning are per-ship models and thus generalize poorly beyond each vessel's records. Transfer and federated learning have been reported to perform better, but under different protocols that often use inputs unavailable before departure or random data splits. It therefore remains unclear which approach performs best. In this study, we compare 11 per-ship, adaptation-based, and global methods on 21 vessels. To prevent leakage, all methods receive identical inputs known or forecast before departure, excluding engine RPM and shaft power, and are tested on intact voyage legs after all training records of each vessel. Global pooling, in which one model describes each vessel by its ship identity and seven ship specifications, performs best overall in every setting examined. For in-fleet vessels, Global LightGBM reaches an overall MAPE of 8.92%, against 11.14% for Per-Ship LightGBM, and outperforms every per-ship and adaptation-based model. Global models of five architectures, including a Transformer, all outperform the per-ship and federated models. Fine-tuning a global model for each vessel, even by low-rank adaptation of the Transformer, adds no accuracy. Without any records of a vessel, the global model reaches a median MAPE of 11.20% and outperforms a per-ship model trained on that vessel's records for 14 of 21 vessels. Adding its first records to the pooled data is as accurate as vessel-specific adaptation. Ship identity and specifications are largely interchangeable for in-fleet vessels, but only the specifications support zero-shot prediction. Its error grows as a vessel's specifications differ from the fleet's. Per-ship models and vessel-specific adaptation are therefore unnecessary under fair comparison. One global model can serve a whole fleet, including newly delivered vessels with similar specifications.

0.24

One-Way Coupling via Patchwise Adaptive Normalization in Transformer Surrogates

cs.LG ·2026-10-10 ·Emmanuel Gottlob, Hugo Thimonier, Ludovico Buizza, August Martens, Alexandre Gavaudan +1 more
similarity 0.59
Abstract

Many physical systems exhibit one-way coupling: exogenous fields such as medium density or obstacle geometry influence the dynamics without being affected by them. We investigate how explicitly representing these fields can improve the accuracy and computational efficiency of transformer-based PDE surrogates. Building on spatially adaptive normalization, we introduce Patchwise Adaptive Normalization (PAdaNorm), which partitions exogenous fields into patches aligned with the state tokenization. We evaluate PAdaNorm on datasets from three different domains, using a Walrus-inspired transformer architecture. Across the three PDE families, PAdaNorm is on par with or up to 16% better than parameter-matched baselines in mean long-horizon variance-scaled RMSE on 60-step autoregressive rollouts. We also find that PAdaNorm better maintains hard physical constraints over long rollouts, such as preventing flow into impenetrable solid regions in porous media. When the conditioning is static, PAdaNorm caches the conditioning embeddings once and reuses them across the entire rollout, reducing inference FLOPs per step by up to 36% compared with parameter-matched baselines. An ablation over eight conditioning variants shows that modulating a single attention axis (temporal or spatial) suffices and that a lightweight shared MLP across blocks remains competitive with per-block projections.

0.23

BridgeCast: Bridging Ocean Wave Forecasts to Reanalysis via Flow Matching with Exogenous Variables

cs.AI physics.ao-phcs.LG ·2026-09-27 ·Siyu Gan, Dongsheng Luo, Kunxiaojia Yuan, Dongjin Song, Jingchao Ni
similarity 0.58
Abstract · 22 pages, including references and appendix

Ocean wave forecasting is essential for maritime safety, offshore operations, and coastal resilience, yet remains challenging due to systematic biases in physics-based models. Physical models, while widely used, rely on approximations and parameterizations that limit their accuracy under complex ocean-atmosphere conditions. To enhance ocean wave forecasting, we propose BridgeCast, within a physics-AI hybrid framework for bias correction. BridgeCast is a probabilistic model based on conditional flow matching (CFM) that learns to transform physical model forecasts into reanalysis-like fields. It treats physical forecasts as corrupted observations and employs a continuous-time generative process to bridge their distribution toward that of reanalysis data. BridgeCast is parameterized by a Transformer-based architecture that enables spatiotemporal modeling, incorporation of exogenous atmospheric variables, and flexible inference via both ordinary and stochastic differential equation formulations. Extensive experiments on real-world datasets demonstrate that BridgeCast consistently outperforms state-of-the-art baselines across regions and forecast lead times.

0.28

OceanLight: Efficient Global Ocean Forecasting via Geometry-Adaptive Unstructured Mesh Representation

cs.LG cs.AI ·2026-08-17 ·Wei Wu, Xiang Wang, Hongze Leng, Qingye Min, Junxing Zhu +1 more
similarity 0.58
Abstract · 35 pages, 21 figures

Reliable global ocean forecasting is critical for climate monitoring, marine navigation, and extreme event early warning. Physics-based ocean forecasting models impose prohibitive computational costs, while existing deep learning approaches predominantly rely on structured-grid architectures, incurring unnecessary computation on masked land cells and enforcing uniform resolution across dynamically heterogeneous ocean regions regardless of local flow complexity. Here we present OceanLight, an efficient global ocean forecasting framework innovatively combining geometry-adaptive unstructured mesh tokenization with a graph neural network (GNN) backbone. OceanLight achieves pointwise forecast accuracy and kinetic energy spectral fidelity exceeding both operational numerical analyses and state-of-the-art AI-based models, while surpassing all AI-based ocean models in geostrophic balance consistency. Furthermore, OceanLight demonstrates reliable mesoscale eddy representation, capturing coherent ocean structures beyond pointwise statistical optimization. These capabilities are delivered with a 62% reduction in GPU memory consumption and 70\% reduction in FLOPs relative to structured-grid baselines. Our unstructured mesh representation establishes a generalizable paradigm for scalable data-driven oceanography.

0.29