CS Paper Radar

Blind Dexterity: Whole-Body Humanoid Manipulation via Pure Proprioception

Aditya Bhatt, Oleg Kaidanov, Puze Liu, Jan Peters

cs.RO ·submitted 2026-08-30 00:32 UTC · v1
positioncode/data

Abstract

We present blind, whole-body manipulation skills on a Unitree G1 humanoid using only onboard proprioception, without cameras, markers, force-torque, or tactile sensors. Despite this minimal sensing, the trained policies exhibit surprising capability across qualitatively different tasks: push-resilient bipedal walking without IMU feedback, active soccer ball trapping with a foot, seeking and lifting a suitcase by its handle, and mounting a randomly positioned skateboard. We argue that these capabilities arise from a key underappreciated signal: the way the joint encoder readouts evolve under purposeful compliant contact, effectively forming a whole-body tactile channel. By generating contact-rich motions, the trained policies actively probe the environment; as a result, task-relevant object state (e.g., pose) becomes increasingly decodable from short proprioceptive histories. We expose this information using compact task-specific state estimators trained alongside, but fully separately from, the policies; their prediction errors decrease rapidly after informative contact. Our results indicate that joint encoder-based proprioception, combined with compliant actuation (now widely available on commercial robots and low-cost motors) is already a strong, practical substrate for whole-body dexterous manipulation and interactive perception, and therefore a natural foundation on which richer sensing can be layered.

Comment
9 pages, 6 figures. Project page: https://aditya.bhatts.org/BlindDexterity/

Closest papers

Nearest neighbours by meaning across the whole index.

Uni-VLaT: Whole-Body Tactile Adaptation of VLA Policies for Humanoid Loco-Manipulation

cs.RO ·2026-09-28 ·Zihao Wang, Shutong Liu, Siqi Zheng, Liu Cao, Ruoqu Chen +3 more
similarity 0.74
Abstract · 12 pages, 5 figures

Physical contact often determines how a humanoid should respond during loco-manipulation, yet vision and proprioception alone are often insufficient to characterize physical interaction, especially when the contact region is occluded. Unlike sparse force or torque measurements at predefined regions, distributed tactile sensing preserves spatially resolved contact patterns across the robot body. We therefore study how to integrate such whole-body tactile information into vision-language-action (VLA) policies for contact-rich control. Our approach, Uni-VLaT, introduces a tactile pathway whose latent state is trained not only for action generation, but also to predict future tactile, proprioceptive, and visual representations. This predictive objective builds a tactile-anchored multimodal context, encouraging a more structured understanding of the physical world. We evaluate Uni-VLaT on five real-robot tasks covering tactile-triggered locomotion, sustained physical interaction, human-robot contact, and loco-manipulation. Uni-VLaT achieves a 75% average success rate, outperforming a baseline without tactile input by 43 points and a tactile-input baseline without predictive supervision by 7 points. Across two pretrained VLA backbones, our method improves Table Sweeping by 30 points on both backbones and Back-Tap Walking by 85-90 points. Ablations further show that contextualized tactile prediction and absolute future targets are critical to performance. These results indicate that predictive tactile learning provides an effective route for extending pretrained VLA policies to whole-body physical interaction.

0.19

Proprioception-Anchored Cross-Modal Pretraining for Zero-Shot Sim-to-Real Contact-Rich Assembly

cs.RO cs.AI ·2026-09-07 ·Yuhan Wang, Yurou Chen, Hongye Jiang, Gaojing Zhang, Wenzhao Lian
similarity 0.73
Abstract

Contact-rich assembly remains challenging because it requires submillimeter spatial accuracy and reliable interpretation of forces during sustained contact. Although simulation-based reinforcement learning offers a scalable training paradigm, discrepancies in visual observations, contact dynamics, and force/torque (F/T) measurements often limit policy transfer. We observe that proprioception is comparatively consistent across domains because joint positions are expressed in a shared calibrated coordinate system and joint velocities are computed consistently in simulation and on hardware. Based on this observation, we present PACE (Proprioception-Anchored Cross-Modal Encoder), which supervises temporal visual and F/T representations by predicting proprioceptive state transitions. Static domain-specific factors, including lighting, texture, and sensor bias, contain little information about joint motion; optimizing the proposed objective therefore suppresses their influence on the learned representation while retaining task-relevant motion cues. Policies trained on frozen PACE features are directly deployed on hardware without real-world fine-tuning or object-pose tracking. Across four contact-rich assembly tasks, PACE attains an average real-world success rate of 93.3\% and only a 2.7-percentage-point sim-to-real drop, while remaining robust to perturbations that substantially degrade pose-based and learned-fusion baselines.

0.21

ExoBridge: Learning a Bare Hand to Hand-Worn Exoskeleton Mapping through Human Limb Coupling

cs.RO ·2026-10-06 ·Ruitong Tian, Xianyao Li, Noah B. Wilson, Fang Xu, Eric Jing Du
similarity 0.70
Abstract · 8 pages, 6 figures

Human video offers a scalable source of experience for dexterous robot learning, but obtaining motion and tactile supervision while preserving bare hand interaction remains challenging. We present ExoBridge, a framework that leverages human limb coupling to learn a bridging function from bare hand video to the motion and tactile state of a sensorized exoskeleton. Our central idea is to use coordinated bimanual behavior to connect an uninstrumented visual source with a measured manipulation interface. During collection, one hand remains bare and provides visual observations, while the opposite hand wears the exoskeleton and supplies synchronized motion and tactile measurements. These paired demonstrations train a temporal visual model to predict fingertip contact, continuous tactile intensity, and relative encoder motion from bare hand video alone. The exoskeleton defines an intermediate state space whose motion coordinates are linked to a dexterous robot hand through existing calibration. Evaluation on 1,215 demonstrations across four manipulation tasks uses held out collection sessions and yields a pooled any contact AUROC of 0.916 and a Pearson correlation of 0.790 for tactile intensity. The learned bridge also predicts relative changes in exoskeleton configuration from bare hand video. These results demonstrate that human limb coupling can turn exoskeleton measurements into supervision for bare hand video, establishing a learned bridge between human visual demonstrations and a robot oriented manipulation interface.

0.19

No Eyes, No Problem: What Does Touch Contribute to Blind Baoding Ball Manipulation?

cs.RO ·2026-10-16 ·Ayush Deshmukh, Nalin Agarwal, Elle Miller, Sethu Vijayakumar
benchmark similarity 0.70
Abstract · 9 Pages, 8 Figures

Humans manipulate objects within their hands through touch alone with remarkable ease, but for robots, achieving sustained real-world manipulation without vision remains an open challenge. Although reinforcement learning (RL) can generate sophisticated blind manipulation policies in simulation, transferring them to a real dexterous hand remains hindered by continuously changing contacts, motion-induced tactile information drift, and the gap between simulated and physical dynamics. We study this problem through Baoding ball rotation on the Shadow Dexterous Hand Lite, using only proprioception and binary tactile feedback as observations. We achieve successful zero-shot transfer through a combination of a sensor-aligned, coupling-aware embodiment in simulation, tactile calibration, and two novel episodic domain randomisations: slew-rate action limits and STuck-AT Taxels. On the physical hand, the policy achieves sustained blind Baoding rotation, completing $\textbf{225 consecutive $\mathbf{180^\circ}$ rotations (112.5 full rotations) at $\sim0.36 \;\text{rot/s}$}$ in a single continuous trial without any vision or object-state information. Furthermore, we evaluate the contribution of tactile sensing relative to proprioception alone and identify the hand regions where tactile information is most important. This is the strongest reported hardware result for Baoding ball manipulation in both rotation count and speed, irrespective of the sensing modality used. By effectively bridging the sim-to-real gap, our framework sets a new benchmark for sustained tactile-driven dexterous manipulation on physical hardware.

0.13

Anchor 1: Precise and Stable Humanoid Control for Whole-Body Manipulation

cs.RO ·2026-10-30 ·Archon Robotics, :, Caojun Wang, Checheng Yu, Gangcheng Jiang +22 more
benchmark similarity 0.70
Abstract

Humanoid controllers have acquired increasingly diverse motor skills, yet translating these capabilities into precise and stable whole-body manipulation remains challenging. Manipulation tasks are sensitive to execution deviations -- even small errors or unintended steps can cause failure. Introducing Anchor 1, a whole-body controller for precise and stable whole-body manipulation, together with a benchmark spanning diverse coordination demands. Anchor 1 adopts calibrated sparse motion references to preserve task-relevant human motion structure without online joint-space retargeting, leaving kinematic freedom for precise control. To guide this freedom towards stable, physically plausible whole-body coordination, we shape the training distribution through offline curation of robot motions paired with these calibrated sparse references. We further introduce explicit error feedback decoupled from motion encoding, improving control precision while supporting flexible command interfaces. To achieve a systematic evaluation of these capabilities, a benchmark is proposed to assess precision, sustained execution stability, and reachability across diverse whole-body coordination demands. Evaluations in simulation and on hardware show stronger precision and stability across all evaluation tracks. Under the most strict real-world global scoring setting, Anchor 1 achieves a 30\% to 80\% decrease in tracking error with fewer look-ahead inputs, and without retargeting compared to all existing controllers. Downstream experiments demonstrate more efficient teleoperated data collection and higher task success using the same deployment pipeline as well. We believe Anchor 1 supports precise and stable whole-body control as a practical basis for humanoid task execution.

0.18

EgoExplorer: A Vision-Motion-Touch Observatory for Human Loco-Manipulation In Situ

cs.RO cs.CV ·2026-10-13 ·Yunsong Zhou, Xuekun Jiang, Haiqi Shen, Hangxu Liu, Chaojian Shi +9 more
code/datacommunity pick similarity 0.69
Abstract · Project page: internrobotics.github.io/egoexplorer.github.io/

Learning humanoid loco-manipulation from human demonstrations rests on observing how locomotion, posture, and object interaction evolve together as tasks unfold. Scaling collection across diverse environments, in turn, favors lightweight, portable capture systems. Yet, existing datasets provide only partial views of this coordination. Thus, we introduce EgoExplorer, a 100-hour vision-motion-touch observatory of human loco-manipulation built with a wearable system. With an emphasis on professional activities, its continuous recordings align egocentric video with reconstructed whole-body motion, fine-grained finger articulation, and tactile observations, accompanied by step-level descriptions. To achieve this coverage with sparse body sensing, we develop the Calibrate-Complete-Constrain pipeline. Concretely, reusable calibration fixes participant geometry and sensor attachments before motion inference to disentangle mounting offsets from articulation. A temporal prior then completes unobserved joint motion, while layered constraints promote measurement agreement, temporal continuity, and geometric consistency, properties that motion plausibility alone does not guarantee. Against tracker-fitted references, the method reduces body-point error by 71.9% relative to the strongest baseline; matched evaluations also show gains in hand stability and contact estimation. Preliminary studies explore multimodal generation and conditioning alongside humanoid retargeting with whole-body control in simulation.

0.57

Contact-UAN: Unsupervised Actuator Networks as a Residual World Model for Humanoid Control

cs.RO ·2026-10-13 ·Nolan Fey, Khai Nguyen, Yash Prabhu, Gabriel B. Margolis, Pulkit Agrawal
similarity 0.69
Abstract · Project website: https://contact-uan.csail.mit.edu/

Humanoid policies trained in simulation can transfer qualitatively to hardware while failing to transfer the force interactions learned during training, compromising torque efficiency, load regulation, and robustness to impacts. This failure can arise from actuator sim-to-real gaps because forces depend on actuator torques. We introduce Contact-UAN, a residual world model that preserves a simulator's physics priors while correcting actuator dynamics to align simulated rollouts with recorded hardware rollouts. For humanoid motion with contact, this requires contact-consistent replay: if hardware playback in simulation begins with misaligned contact wrenches, the residual model learns to correct reset artifacts rather than actuator discrepancies. Using only onboard proprioception, Contact-UAN infers the simulator-side stance-foot pose needed to initialize replay with consistent contact forces. We show that a UAN trained on 6.5 minutes of real-world walking data generalizes to tasks that benefit from accurate force and impulse regulation and produces policies that transfer seamlessly to the real world, yielding 20% lower running torque, 43% lower force-tracking error, extreme compliance, accurate impedance control, and dynamic, robust jumps.

0.28

FWBC-VLA: Force-Aware Whole-Body Compensation for Contact-Rich Loco-Manipulation

cs.RO cs.AI ·2026-09-03 ·Yutian Zhang, Siyuan Ma, Liwen Yang, Yang Li, Ce Hao +4 more
similarity 0.69
Abstract · 9 pages, 6 figures

Contact-rich loco-manipulation requires a bridge between semantic action generation and physical interaction control. Existing Vision-language-action (VLA) models generate task-level actions from visual and linguistic observations, but cannot interpret the physical interactions induced by those actions. While the whole-body control (WBC) policy can stabilize the robot, it cannot distinguish task-relevant interaction forces from forces induced by external disturbances during manipulation. Although force/torque sensors provide direct measurements of physical interactions, retrofitting them entails additional hardware costs and substantial integration effort, particularly for platforms not designed with sensor integration in mind. To address this problem, we propose FWBC-VLA, a force-aware framework that bridges task-level VLA action generation and low-level whole-body compensation control for wheeled-legged robots. First, we introduce HSR-Force, a sensorless residual-torque estimator for inferring contact strength and its temporal variation. These contact estimates are then encoded as tokens and injected into the VLA action expert during action decoding, enabling the policy to perceive contact onset, sustained loading, and release. For loco-manipulation tasks, all parameters of the pretrained VLA backbone are fine-tuned on our WL\&Arm Dataset, which comprises more than 5,000 episodes. Moreover, the robot's proprioceptive state, the Jacobian-derived body-frame force estimate, and the estimated contact state are jointly fed into a compensation generator to produce corrective actions. The manipulation-centric actions are subsequently combined with the corrective actions and passed to the WBC policy for execution. Real-world experiments on whiteboard wiping and door opening with a door closer demonstrate the effectiveness of our FWBC-VLA in contact-rich loco-manipulation.

0.46