CS Paper Radar

MotionSync: Non-Causal Refinement of Causal Tracker for Label-Efficient 3D Perception

Rahul Ahuja, Bala Murali Manoghar Sai Sudhakar, Shashwata Gupta, Venkatraman Narayanan, Varun Ravi Kumar, Senthil Yogamani

cs.CV ·submitted 2026-08-30 05:25 UTC · v1

Abstract

Three-dimensional box-and-track annotation is the cost bottleneck in autonomous-driving data engines, and the offline systems built to relieve it replace the online perception stack outright, so a team needing both regimes maintains and reconciles two. MotionSync makes the causal/non-causal boundary an explicit architectural seam instead. A strictly causal tracker, built on a strong published baseline and extended with innovation-driven uncertainty calibration, frame-rate-invariant kinematic association gates, and multi-hypothesis motion with learned mode selection, emits a valid online result. A non-causal pass then revises the buffered trajectories with Rauch--Tung--Striebel smoothing applied separately to pose, extent and yaw, physics-validated gap completion, and semantic pruning of ghost tracks against LiDAR point labels. The refiner never writes back, so one system serves both regimes and refinement's effect is a delta over an unaltered causal estimate. Used as an auto-labeller, a fixed 3D detector trained on 25% human labels plus MotionSync pseudo-labels reaches 96.9% of its full-supervision mean average precision (mAP) on Waymo, and at a 10% budget the non-causal pass accounts for +3.3 mAP/L2 over pseudo-labels from the same tracker's causal stage. Re-fitting the online tracker on its own refined output recovers 73% of the benefit of human supervision, while its causal output is worse supervision than no re-fitting at all. As a tracker MotionSync is at parity with the leading published offline entries on the headline metric and ahead of them on error composition, which is where a refinement pass can act at all: it reduces misses and fragmentations together, the signature of gap completion rather than of a tuned detector.

Closest papers

Nearest neighbours by meaning across the whole index.

Kinematic Causal Attribution: Black-Box Explanations of Motion versus Geometry for 4D Point-Cloud Video Models

cs.CV ·2026-10-29 ·Zerui Wang
similarity 0.63
Abstract · 27 pages, 6 figures, 14 tables

4D perception models, which classify 3D point-cloud videos, are being built into robots, assistive monitoring and AR, yet before deploying one a practitioner cannot check which cue it relies on: how a body part moves, or what shape it has. 3D attribution is single-frame, video attribution is confined to RGB pixels, gradient maps need white-box access, attention is absent from state-space backbones, and point-level perturbations assume a point correspondence across frames that real depth and LiDAR data lack. We present Kinematic Causal Attribution (KCA), a black-box, interventional attribution method that queries only the model's outputs. Its freeze operator removes a region's motion while keeping its shape, and a shape-free proxy removes the shape while keeping the motion. Together they span a motion$\times$geometry cube for every tracked region, whose order-symmetric Shapley decomposition is complete and whose interaction is measured rather than assumed away. The operators rewrite per-frame point sets, so they need no correspondences, and a context-averaged estimator handles structures that span several regions. We validate KCA on the official PSTNet, P4Transformer and Mamba4D trained on MSR-Action3D. The decisive test is an audit: two binary tasks are built from real clips whose classes differ only in the motion or only in the shape of the same arm, and the motion share of the arm's importance follows the defining cue on all three backbones (0.83 vs. 0.60 on P4Transformer, 0.86 vs. 0.30 on PSTNet, 0.92 vs. 0.61 on Mamba4D), a distinction no single attribution map can make. The split costs no faithfulness: the necessity maps have the lowest deletion AUC on P4Transformer and PSTNet, tie with the best baseline on Mamba4D, and lose their correlation with the trained model's once the weights are randomised. Skeleton ground truth, re-sampling stability and cost complete the validation.

0.29

CT-SGAL-LIO: Causal Continuous Time Refinement of Discrete LiDAR Inertial Odometry

cs.RO ·2026-11-12 ·Nam Tran, Thu Tran, Toan Nguyen, William J Beksi, Tuan Dang
published similarity 0.61
Abstract · 7 pages, 4 figures, ICRA 2027 submissions

State-of-the-art LiDAR-inertial odometry methods, including those on richer state manifolds, achieve strong global accuracy, yet their pose stream alternates between propagation and correction and can oscillate over short horizons even when globally accurate. Most existing methods follow these approaches: they either modify the filter to enable faster updates or estimate a continuous-time trajectory from raw LiDAR and inertial data. The latter involves extra optimization, delaying state updates and becoming less robust during rapid rotations or accelerations. We propose CT-SGAL-LIO, a continuous-time refinement module that smooths the posterior pose stream of a discrete SGal(3) estimator without modifying the estimator itself. The key novelty is to perform continuous-time trajectory refinement directly on the projected SGal(3) posterior: we fit a cubic trajectory over a bounded window of recent poses and evaluate it at a small fixed lag. This places the query time within the observed interval, so the refined pose is obtained by interpolation rather than extrapolation, while preserving causal operation. CT-SGAL-LIO improves relative trajectory accuracy on 17 sequences from three public benchmarks. Across 17 sequences from GRAND-TOUR, MCD, and GEODE, CT-SGAL-LIO improves short-term motion accuracy while largely preserving global accuracy. RTE improves by up to 70% on GRAND-TOUR and on all seven GEODE sequences, with 9.9-51.1% reductions. A 19.5-min R-Campus run also reduces posterior jumps by 85.4% with only a 4.7 mm change in the end-to-start gap. We plan to release our source code and results to support community validation and reproducibility.

0.27

Drive3R: Block-wise Streaming Geometric Foundation Models for Autonomous Driving

cs.CV ·2026-10-10 ·Tianyi Yang, Haojun Yang, Jipeng Xiao, Xuesong Chen, Shaoshuai Shi +2 more
code/data similarity 0.60
Abstract · 11 pages, 6 figures, 4 tables. Project page: https://silence-ai423.github.io/Drive3R/

High-fidelity closed-loop simulation for autonomous driving increasingly relies on dense multi-view 3D reconstruction. While recent feed-forward geometric foundation models have revolutionized per-scene optimization, applying them to continuous, long-horizon driving sequences is computationally intractable due to GPU memory limits and the quadratic complexity of global attention. Existing scaling strategies are fundamentally limited, as causal streaming suffers from compounding scale drift and trajectory deviation, while rigid "chunk-then-align" heuristics fragment global context and produce trajectory discontinuities. To address these limitations, we introduce Drive3R, a block-wise streaming geometric foundation model. Its block-wise causal attention resolves the scalability bottleneck of fully bidirectional attention while avoiding the loss of local future context in purely causal streaming. Its confidence-aware re-anchoring further mitigates long-range drift by detecting unreliable streaming states, re-initializing the KV cache, and stitching refreshed segments through SE(3) alignment. Extensive experiments demonstrate that Drive3R establishes a new state-of-the-art on nuScenes, KITTI, and Waymo. Specifically, on nuScenes, it improves over the recent DVGT-2 baseline from 0.1806 to 0.1081 in AbsRel, from 0.6750 to 0.5344 in point-cloud Accuracy, and from 1.5812 to 0.9092 in ATE.

0.71

DAPEVO: Deep Adaptive Patch Frame-Event Visual Odometry

cs.CV ·2026-09-25 ·Luca Gandolfi, Simone Nascivera, Roberto Pellerito, Rong Zou, Chiara Plizzari +1 more
similarity 0.60
Abstract

Visual odometry is essential for autonomous navigation in GPS-denied environments, yet RGB-based methods remain vulnerable to motion blur, challenging illumination, and dropped frames. Event cameras complement conventional cameras with high temporal resolution and dynamic range, but their asynchronous measurements complicate reliable correspondence estimation. We present DAPEVO, a learned visual odometry system that estimates image and event correspondences independently at shared patch locations and fuses their correlation evidence before motion refinement. Each tracked patch maintains image and event descriptors, and a learned scalar gate combines modality-specific correlation embeddings for each patch--frame edge before a shared recurrent refinement and bundle-adjustment update. DAPEVO also supports event-only observations, enabling continued tracking when RGB frames are sparse or unavailable, while modality-aware keyframe culling preserves scarce frame constraints. On UZH-FPV, when retaining only one in six RGB frames, DAPEVO's mean absolute trajectory error (ATE) increases by only 36%, from 1.00 to 1.36m, whereas the ATE of DPVO and RAMP-VO rises by factors of $3.7\times$ and $3.1\times$, respectively. On TartanEvent, DAPEVO similarly remains below 1m ATE at 3Hz RGB input, while DPVO and RAMP-VO exceed 9m. Under degraded RGB input on TartanEvent, DAPEVO achieves an ATE of 0.60m, compared with more than 4m for both DPVO and RAMP-VO, while also outperforming event-only DEVO at 0.87m.

0.16

Map2SLAM: From Streaming Map Prediction to Real-Time SLAM

cs.CV ·2026-11-08 ·Jian Gao, Lin-Zhuo Chen, Yihang Chen, Jiagang Chen, Jiacheng Dong +4 more
code/data similarity 0.59
Abstract · 17 pages, 10 figures. Project page: https://robbyant-research.github.io/Map2SLAM/

Streaming 3D foundation models (3DFMs) estimate camera poses and dense geometry online, but they fall short of SLAM: their predictions are fixed once emitted, so loop closures cannot correct accumulated drift. With such models already providing strong geometric capability, a central question for SLAM becomes how to schedule their inference and how to keep its results as revisable state. We present Map2SLAM, which keeps LingBot-Map frozen, trains only a lightweight retrieval head, and builds SLAM on the model's inference interface, turning its predictions into observations of an external persistent SLAM state. The front-end tracks every incoming frame with the model's causal streaming inference and decides which frames are written to the persistent state as keyframes. The back-end asynchronously decides when and which past frames to re-observe, re-running the model's joint inference over them with fresh context; verified loop observations correct the trajectory online, and segment observations refine dense geometry after the sequence. All invocations share a single frame encoder pass per image, whose cached features also drive loop retrieval, so frequent re-invocation incurs no additional encoding cost. Map2SLAM achieves state-of-the-art performance on KITTI, VBR, and Oxford Spires, reducing mean ATE by over 40% compared with the best uncalibrated baselines, while maintaining real-time tracking at over 28 FPS at a resolution of $518\times154$ on an NVIDIA RTX 5090D GPU. Please visit our project page at https://robbyant-research.github.io/Map2SLAM/.

0.22

DriveFoundry: Co-Evolving Data and Model for Efficient Closed-Loop Iteration in Autonomous Driving

cs.AI ·2026-11-08 ·Ziyang Yao, Yuncheng Jiang, Fang Li, Haochen Liu, Shaoqing Xu +22 more
code/data similarity 0.58
Abstract · 57 pages, 31 figures, Project page: https://Xiaomi-EV.github.io/Xiaomi-Drive-o1

A driving foundation model must learn reusable decision knowledge from rare critical events and apply it under strict runtime constraints. We introduce DriveFoundry, a closed-loop framework improving iteration efficiency under data and computation budgets by coupling structured causal data refinement with adaptive inference. The Data Engine builds traceable scene-candidate records linking scene evidence and factor-decision relations to candidate trajectories and outcome assessments. Candidate comparisons and counterfactual annotations clarify how scene factors affect behavioral feasibility and preference. Verified model failures guide VLM-assisted annotation and expert correction, refining training data and annotation systems. The model engine, Xiaomi-Drive-o1, unifies Perception, Causation, Action, World, and Value within a shared vision-language backbone to enable cross-task knowledge transfer. Block-wise latent refill passes candidate-specific evidence and predicted visual consequences between task blocks, connecting scene understanding, planning, and evaluation. A learned value-of-computation head selects tasks and allocates latent tokens based on expected benefit and cost, adapting inference to each decision. On PhysicalAI, the 9B model achieves the lowest ADE@1 across evaluated splits and horizons among tested models. In AlpaSim, it outperforms Alpamayo 1.5 across all metrics and achieves lower close-encounter and off-road rates than the 34B Alpamayo 2 Super, while trailing in progress and AlpaSim scores. For the 0.8B variant, joint training reduces 5 s minADE@6 by about 54% without altering the inference path or token budget. Adaptive inference matches full reasoning performance using only 28% of tokens. Real-vehicle tests confirm runtime feasibility, supporting a unified paradigm for learning from critical experience and dynamically allocating computation.

0.20

CausalAlign: Causal Alignment of Video Generation Models for Consistent Ego-Motion

cs.CV ·2026-10-21 ·Kai Zhu, Yintianrun Zhang, Shuwei Jiang, Ruolin Zuo, Yixin Chen +5 more
benchmark similarity 0.57
Abstract

Diffusion-based video generation models (VGMs) can produce visually plausible videos, yet their camera ego-motion often drifts over long horizons. Camera ego-motion determines how the viewpoint changes between frames and is essential for maintaining consistent geometry and trajectories. To address this problem, we propose CausalAlign, a causal alignment framework with two components. First, we diagnose how precise ego motion is represented, used, and retained within VGMs using linear probes and causal interventions, revealing a rise-and-fall pattern during denoising. Second, we strengthen ego-motion state in VGM by aligning the representations at the identified layers to a 3D foundation model through delta-token space. This space encodes the changes between consecutive frames, allowing the alignment to focus on ego-motion dynamics rather than static scene content. With Wan2.2 fine-tuned on DL3DV and RealEstate10K, CausalAlign can largely improve motion accuracy, geometric consistency, and temporal smoothness, while preserving visual quality. For example, it improves geometric consistency by more than 20% relative to the base model. Moreover, with the fine-tuned VGM, CausalAlign improves the success rate of world action models (WAMs) by 10 points on mobile manipulation tasks of RoboCasa365 benchmark. Overall, CausalAlign improves ego-motion consistency in diffusion-based VGMs and yields noticeable gains in embodied models.

0.35

Causal neural set filtering for online multi-target tracking

cs.LG cs.AI ·2026-09-13 ·Zhongdi Liu, Huangyu Dai
code/data similarity 0.57
Abstract · 5 pages, 2 figures

Transformer-based multi-target tracking (MTT) jointly learns data association and state estimation, but MT3/Track-MT3-style trackers repeatedly re-encode measurement windows, incurring redundant computation. We propose Causal Neural Set Filtering (CNSF)\footnote{\href{https://github.com/daihuangyu/CNSF}{Code: https://github.com/daihuangyu/CNSF}}, a neural set filter that encodes only current measurements while carrying past evidence in a structured recursive track state. CNSF combines exclusive Sinkhorn association, association-conditioned Kalman-shaped updates with moment matching, and recurrent Bernoulli lifecycle modeling with measurement-driven birth. These mechanisms impose soft one-to-one constraints, propagate association-induced state uncertainty, and support existence estimation under missed detections and birth--death transitions. On a held-out three-regime simulated test set, CNSF reduces mean GOSPA and T-GOSPA relative to Track-MT3 by 19.3\% and 30.4\%, with 55.9\% fewer parameters and a $3.76\times$ speedup in single-thread CPU inference.

0.41