CS Paper Radar

A Calibration Audit of Confidence in Feed-Forward 3D Reconstruction Models

Nanxing Nick Deng, Qing Cheng, Niclas Zeller, Daniel Cremers

cs.CV cs.AI ·submitted 2026-08-30 10:21 UTC · v3

Abstract

Feed-forward 3D reconstruction models output a per-pixel confidence that is used by downstream systems as an uncertainty signal. The confidence is trained to serve as a weight in the training loss of models. Whether the confidence can be used as an uncertainty magnitude has not been measured. We audit seven backbones on 13 datasets and score the confidence on four properties, i.e., ranking of error, ratio of error to uncertainty on average, slope of this ratio across the confidence range, and coverage of the implied error distribution. Although the confidence ranks error quite well, the uncertainty decoded from the confidence is too small compared to the actual error. The uncertainty has the right size only under the exact training conditions. The median case is off by at least 2.4x across all seven models, while the uncertainty is further off the more confident the model is. Our work shows that the overconfidence appears on unseen scenes even when the model reaches its loss's optimum. As a post-hoc repair we fit a power law on the confidence with two constants per backbone--dataset pair. The repair brings all four audited properties to target at the dataset level, while leaving ranking untouched. Fitted with the target dataset held out, the constants bring the median case from 2.4x off to 1.35x. The repair does not hold below the dataset level, where two-thirds of held-out scenes are still more than five points off in coverage. We attribute what the repair cannot reach to the model, which carries neither the scale of the error nor the shape of its distribution across predictions. We release the audit protocol, its results, and the fitted constants per backbone-dataset pair.

Closest papers

Nearest neighbours by meaning across the whole index.

ReVar3R: Gauge-Aware Perturbation Uncertainty for Feed-Forward 3D Reconstruction

cs.CV ·2026-10-06 ·Sammam Mahdi, Fariha Binta Salim, Rakin Bin Rabbani, Aniqua Nusrat Zereen
highly cited similarity 0.72
Abstract

A correctly reconstructed distant point appears uncertain even when a frozen 3D model processes equivalent inputs because its output frame rotates fractionally. This exposes a weakness of trainingfree perturbation uncertainty: when outputs contain an unobserved symmetry, run-to-run variation potentially reflects symmetry rather than error. Existing alternatives have trade-offs: built-in confidence is outperformed in most evaluated conditions, while trained evidential heads require modelspecific supervision. For point maps, this research derives a closed-form, error-independent variance term that grows with scene extent and potentially overwhelms the desired signal. Simulation reproduces the effect; all 30 real VGGT view-sets tested exhibit its predicted $\|x_p\|^2$ signature. ReVar3R robustly registers predictions to a common similarity frame before computing per-point variance, without retraining or modifying the frozen model. Optional calibration and fusion use a held-out split. Across VGGT, π3, and MASt3R on six datasets, the same estimator on every backbone lowers AUSE below built-in confidence in 15 of 18 conditions. The staged evaluation yields 11 of 18 wins for the label-free core, 12/18 for label-free equal-weight fusion, 14/18 with held-out weights, and 15/18 when the built-in signal is included. Against a trained evidential head, the result is a trade-off: the head calibrates magnitude better and leads in its training domain, whereas ReVar3R transfers across backbones without adaptation. Its ranking improves point filtering, but it does not detect stable systematic bias, aid novel-view synthesis, or transfer calibration across domains.

0.45

Modeling Uncertainty Propagation in 3D Morphable Models

cs.CV cs.LG ·2026-10-17 ·Megh Shukla, Edo Collins, Prashanth Chandran, Karel Petránek, Sergio Orts-Escolano +2 more
code/data similarity 0.65
Abstract

We study the problem of mapping parameter-space variance of a 3D Morphable Model (3DMM) to per-vertex variance. Traditionally, per-vertex variance has been used to visually interpret the learnt parameter uncertainty. However, mapping parameter-space variance to per-vertex using sampling or error propagation is computationally expensive. We address this limitation with Closed-form Local Uncertainty Estimation (CLUE), which transforms the parameter-space distribution of 3DMMs to per-vertex through a closed-form approximation. CLUE emerges from applying the law of total variance to the 3DMM formulation and is modular, computationally inexpensive, and accurate. Subsequently, we study integrating CLUE for in-the-wild human mesh recovery training and inference. We note that CLUE uses the geometry of the mesh as an inductive bias when predicting the variance, leading to improved accuracy. Through extensive qualitative and quantitative experiments, we show that when used in training, CLUE (1) outpeforms probabilistic and deterministic baselines on metrics evaluating joints, mesh and uncertainty, and (2) has the highest uncertainty-to-error spearman correlation, with applications including data mining and interpretable uncertainty. Finally, we share SAM 3D Body (CLUE) which augments the regressor with high resolution uncertainty maps. We make our code available at https://github.com/vita-epfl/CLUE

0.27

GeoCond: A Conditioning-Aware Reliability Adapter for Feed-Forward 3D Reconstruction

cs.CV ·2026-09-16 ·David Ahmedt-Aristizabal, Mohammad Ali Armin, Russell Tsuchida, Lars Petersson
publishedhot direction similarity 0.65
Abstract · Accepted in WACV 2027

Feed-forward 3D foundation models such as VGGT predict cameras, depth, and point maps in a single pass, but can fail silently under low overlap, low parallax, and extreme relative rotation. Stratified analyses over these factors show that these failures are governed by geometric conditioning and are poorly captured by native aleatoric confidence. We introduce GeoCond, a lightweight reliability adapter for frozen feed-forward 3D backbones. GeoCond reads geometric conditioning cues and the backbone's own stability signals and outputs pose-level uncertainty and a refinement gate. During training, it can be supervised by frame-permutation orbit variance, ground-truth pose error when labels are available, or cycle residuals from unlabelled independent pose graphs. At inference, the default head requires only one backbone pass and a small MLP. On VGGT, GeoCond improves out-of-distribution (OOD) AUSE (area under the sparsification-error curve; lower is better) from $0.32$ to $0.20$ over native confidence on held-out outdoor scenes (and to $0.21$ when trained on indoor data only) and avoids the collapse caused by applying bundle adjustment uniformly, without improving on feed-forward poses there. For three of six backbones, cycle-distilled variants provide a ground-truth-free adaptation route, including cases where permutation variance vanishes on equivariant models. The same reliability signal supports gated refinement, pose-graph weighting, calibration, curation, and capture decisions. Reliable feed-forward 3D reconstruction requires not only predicting geometry, but also knowing when that geometry should be trusted.

0.44

Learning Which Correspondences to Trust: Confidence-Weighted Event-Camera Localization in LiDAR Maps

cs.CV cs.RO ·2026-10-08 ·Panagiotis Kiousis, Kuangyi Chen, Jun Zhang, Friedrich Fraundorfer
code/data similarity 0.61
Abstract · 8 pages, 8 figures/tables. Submitted to IEEE ICRA 2027 (under review). Code: https://github.com/panagiotisq/CELL

Localizing an event camera against a pre-built LiDAR map can be cast as dense optical-flow estimation between a rendered depth view and an event image, followed by a Perspective-n-Point (PnP) solver over the induced 3D-2D correspondences. Existing pipelines rely on geometric consensus during pose estimation, but do not explicitly model the reliability or pose informativeness, i.e., how strongly a correspondence constrains the camera pose, of individual correspondences. We show that the natural way to learn it -- using the per-correspondence error to constrain the learning of confidence -- suffers from a depth-dependent bias: small pixel errors reside predominantly at large depths and do not lead to high pose informativeness. Instead, in our method (CELL), we learn a per-correspondence confidence end-to-end through the pose, using a differentiable probabilistic PnP whose log-partition term encourages weight configurations that yield a better-constrained pose distribution. The learned confidence is used in three ways: (i) it reweights the flow supervision in a decoupled training scheme that keeps pose gradients out of the flow/edge backbone; (ii) it drives a probabilistic correspondence selection at test time; and (iii) together with the network's edge-probability it weights a final edge-matching refinement. We further design a partial-completion depth representation that adds signal without hallucinating across large gaps. On M3ED and DSEC our full system improves over the LEAR baseline on the majority of the evaluated sequences: it reduces the median translation error by up to 26.9% and the median rotation error by up to 15.8%.

0.28

Does VGGT Know What It Does Not Know?

cs.CV cs.LG ·2026-10-26 ·Adityan Thirumani Srinivasan, David Nordström
benchmark similarity 0.61
Abstract · 9 pages, 6 figures, 7 tables

Feed-forward 3D reconstruction models such as VGGT regress cameras and geometry in a single forward pass, but they report no uncertainty for the camera poses they predict: an incorrect relative pose looks no different from a correct one. We ask whether the frozen model nonetheless knows when its pose is wrong. On HardMatch, a benchmark of 1,000 deliberately difficult image pairs on which VGGT fails on 35% of pairs, a linear probe on VGGT's frozen features predicts pose failure on held-out categories with ROC-AUC 93.5%, compared with 79.7% for VGGT's own point-map confidence and 77.7% for a classifier trained on all of VGGT's outputs. The probe catches failures VGGT is confident about, lets a downstream system abstain on the pairs it distrusts, and transfers without retraining to rotation failures on PhotoTourism and ScanNet-1500, beyond what co-visibility explains. This knowledge is absent from the per-image encoder: it is computed partway through the layers that fuse the two views, and the same holds for a second model, $π^3$. In essence, we find that VGGT knows more about its own failures than it reports.

0.26

When Wider Views Fail: Stress-Testing Feed-Forward 3D Reconstruction

cs.CV ·2026-09-21 ·Daisy Li, Kyle Gao, Quanyun Wu, Hanna Chomko, John S. Zelek +1 more
similarity 0.60
Abstract

Feed-forward 3D reconstruction models enable efficient geometry estimation from sparse images, but their pretrained nature can make them vulnerable to distribution shifts beyond their training data. Identifying these failure modes is important for understanding when such models can be reliably deployed in unconstrained imaging settings. We investigate viewpoint variation as a controlled distribution shift by varying the angular span of sparse image inputs while keeping the input budget fixed. Across multiple feed-forward reconstruction models, we observe substantial degradation as viewpoint span increases, with wide spans producing both incomplete surface coverage and geometry unsupported by the observed imagery. These results reveal that viewpoint variation can induce failure modes beyond conventional reconstruction incompleteness, highlighting the need to evaluate pretrained feed-forward models under distribution shifts that challenge their learned geometric priors.

0.10

Efficient Confidence-Aware Densification for 3DGS

cs.CV cs.GR ·2026-10-09 ·Manuel Hofer, Thomas Köhler, Felix Windisch, Bernhard Kerbl, Markus Steinberger +1 more
position similarity 0.60
Abstract

3DGS-MCMC has replaced the gradient-driven density control of 3D Gaussian Splatting with opacity-based sampling and relocation, and is now the de facto standard for prior-free densification under a fixed primitive budget. Because opacity stays high where the scene is already well reconstructed, this sampling sends most new primitives to the foreground and leaves the background under-reconstructed. At low budgets, prior-based methods such as ConeGS and EDGS outperform it, at the cost of a pre-trained radiance field or dense image matches and a separate initialization stage. We argue for a comeback of error-driven densification within the fixed-budget MCMC framework. Our confidence-aware densification keeps the fixed budget and gradual growth of 3DGS-MCMC, but places primitives by the image error instead of the opacity. New primitives are drawn mostly where screen-space gradients are large. We favor primitives with a low learned confidence, which marks regions the reconstruction still explains poorly, and relocate the primitives that contribute least to the rendered images to these places. Averaged over 24 scenes, our method outperforms 3DGS-MCMC in PSNR, SSIM and LPIPS at every budget from 100k to 2M primitives. At 100k, without a prior or an initialization stage, it recovers 0.84dB of the 1.05dB PSNR by which ConeGS leads 3DGS-MCMC, and from 500k on, it has the highest PSNR and SSIM of all fixed-budget methods we compare with, including ConeGS and EDGS. While inherently prior-free, our densification can also exploit priors: from the ConeGS or EDGS initialization, it matches ConeGS in PSNR and SSIM at 100k and is best in all three metrics at 500k.

0.21

Uncertainty of Vision Medical Foundation Models

cs.LG ·2026-08-31 ·Haoxu Huang, Narges Razavian
similarity 0.60
Abstract

Accurate uncertainty estimation is essential for machine learning systems de- ployed in high-stakes domains such as medicine. Traditional approaches primarily rely on probability outputs from trained models (point predictions), which provide no formal guarantees on prediction coverage and often require additional calibra- tion techniques to improve reliability. In contrast, conformal prediction (region prediction) offers a principled alternative by generating prediction sets with finite- sample validity guarantees, ensuring that the ground truth is contained within the set at a specified confidence level. In this study, we explore the impact of pre-training approach, dataset scale and domain on both point and region-level uncertainty quantification, by studying domain-specific vision medical foundation models vs. general domain vision foundation models. We conduct a comprehensive evaluation across foundation models trained on retinal, histopathological, and Chest X-Rays data, applying various calibration techniques. Our results demonstrate that (1) pre-training on higher-quality domain-specific datasets along with self-supervised learning leads to better-calibrated point predictions than general domain pre-training, (2) stan- dard re-calibration methods alone cannot fully mitigate uncertainty discrepancies across models trained on different data sources, (3) domain-specific foundation model can lead to more efficient conformal prediction. These findings highlight the importance of careful model selection and the inte- gration of both point and region prediction to enhance the reliability and trust- worthiness of medical AI systems. Our work underscores the need for a holistic approach to uncertainty quantification in recent development of medical vision foundation model, ensuring robust and interpretable AI-driven decision-making.

0.06