CS Paper Radar

XAI2CSI: Interpreting CSI with eXplainable AI for Human Activity Recognition

Idio Guarino, Alfredo Nascita, Domenico Ciuonzo, Damiano Carra, Antonio Pescapé

eess.SP ·submitted 2026-08-31 16:14 UTC · v1
publishedhot direction

Abstract

Wi-Fi Channel State Information (CSI) has emerged as a key enabler for device-free Human Activity Recognition (HAR), enabling low-cost, unobtrusive sensing using existing communication infrastructure. However, Deep Learning (DL) models trained on CSI data often struggle to generalize across users, environments, and device setups due to the context sensitivity of wireless propagation. Despite this challenge, limited attention has been devoted to understanding model decisions and generalization failures. This paper introduces XAI2CSI, a framework that leverages eXplainable Artificial Intelligence (XAI) to analyze DL-based CSI sensing systems. XAI2CSI employs SAGE, a model-agnostic explainability method, to quantify temporal, spectral, and spatial CSI contributions to HAR decisions under nominal and cross-context evaluations on IEEE 802.11ax data. Our analysis reveals that the considered DL model exhibits limited robustness to unseen conditions due to an over-reliance on context-specific CSI patterns, causing models to misinterpret the underlying signal dynamics when deployment conditions change. The proposed methodology and findings provide a reference framework to explore alternative solutions and guide the development of robust, transparent Wi-Fi sensing systems.

Comment
accepted at 22nd International Conference on Wireless and Mobile Computing, Networking and Communications (WiMob 26)

Closest papers

Nearest neighbours by meaning across the whole index.

CSI-Agent: LLM-Assisted Few-Shot Adaptation for Cross-Domain Wi-Fi CSI Sensing

cs.AI cs.NI ·2026-09-25 ·Tianya Zhao, Chuan Liu, Xuyu Wang
similarity 0.68
Abstract · 10 pages, 6 figures, 5 tables. Submitted to INFOCOM

Wi-Fi channel state information (CSI) has enabled device-free sensing applications such as human activity recognition. However, CSI sensing models remain brittle in cross-domain deployment, where changes in users or environments can produce incorrect predictions. Existing solutions usually treat this problem as an offline model-design problem, by pretraining a stronger representation or applying one fixed adaptation method to the entire target domain. In practice, labeled target data are scarce and different classes may fail in different ways under the same domain shift. To address this, we propose CSI-Agent, an evidence-seeking LLM agent that reformulates cross-domain CSI adaptation as a deployment-time decision-making problem. Rather than processing raw CSI or making sample-level predictions, CSI-Agent summarizes target-domain behavior into sensing-grounded class-level evidence. It establishes a strong target-adaptive default from complementary CSI views and uses an LLM planner to determine whether each class should retain the default or invoke a specialized action. Deterministic verification and bounded execution further reduce unreliable interventions. We evaluate CSI-Agent on four public datasets using five cross-domain splits covering device, user, environment, and compositional shifts. Under 1-shot adaptation, CSI-Agent achieves the best target-domain performance across all splits and improves the average Macro-F1 by about 16\% compared to the strongest baseline method.

0.28

Temporal vs Spectral Resolution in CSI Reporting for Wi-Fi ISAC

eess.SP ·2026-10-16 ·Abolfazl Zakeri, Sumit Roy, Nhan Thanh Nguyen, Markku Juntti
similarity 0.68
Abstract · Under review for publication

CSI feedback is fundamental to proposed uses of Wi-Fi sensing such as human activity recognition (HAR); but it also constitutes significant overhead as resources must be allocated away from data communications. Wi-Fi CSI extraction can be explored along two dimensions in IEEE 802.11bf: reporting intensity, i.e., temporal resolution, and number of reported subcarriers, i.e., spectral resolution. We explore periodic and IEEE 802.11bf threshold-based reporting at matched rates, and uniform decimation and block-mean grouping at matched report sizes. We further propose reporting the mean CSI accumulated since the last report. Using the 802.11bf report size as the metric, we evaluate the accuracy-cost tradeoffs on three public datasets with our proposed model, a convolutional neural network combined with a gated recurrent unit and temporal pyramid pooling. The proposed periodic reporting with mean payload and block-mean grouping improves accuracy by up to 53 percentage points at equal CSI overhead cost. Temporal resolution is generally more cost-effective than spectral resolution. With only at most 7.7% of full-CSI feedback cost, the proposed scheme achieves 96-98% of full-CSI accuracy.

0.23

From Activity Recognition to Shift Detection: Variational Wi-Fi Sensing with Evidential Uncertainty

cs.LG ·2026-11-18 ·Luca Cotti, Marco Cominelli, Francesco Gringoli, Lance M. Kaplan, Mani B. Srivastava +5 more
benchmark similarity 0.66
Abstract · 17 pages,8 figures, 8 tables

Human motion perturbs wireless channels, making commodity Wi-Fi devices a practical platform for device-free activity recognition. Yet Channel State Information (CSI) also depends strongly on the person, receiver position, recording session, and surrounding environment, so a classifier can continue producing activity labels after its deployment conditions have moved away from those seen during training. We propose Wi-HAR, a multi-antenna architecture in which four Variational Auto-Encoders learn compact distributions from raw Wi-Fi 6 CSI magnitudes and a delayed-fusion classifier combines their means and log-variances. On twelve activities from a public benchmark, Wi-HAR reaches 96.6% median recognition accuracy, compared with 70.8-81.5% for independently optimized single-antenna models, showing that the antennas provide complementary views of the same activity. We then use the same latent backbone to detect deployment shifts without using shifted samples for model selection or calibration. A class-conditional uncertainty score derived from Evidential Deep Learning achieves a macro-average ROC-AUC of 0.897 across eleven datasets that change receiver position, participant, recording session, or room, and detects 82.5% of shifted samples at a realized 5.2% in-distribution rejection rate. Detection performance nevertheless varies substantially across receiver positions, showing that the same physical change does not induce a uniform uncertainty response. The compact representation also supports shallow decision-tree analysis using variables from several antennas.

0.24

Cross-Domain Inference for Human Localization: Applying Wi-Fi RSSI Data to CSI-Trained Models

cs.CR cs.LGcs.NI ·2026-09-15 ·Ariel Duschanek-Myers, Thomas Welsh, Helmut Neukirchen
top venue similarity 0.65
Abstract

Wi-Fi signal data can be used to compromise the privacy of individuals. While many existing approaches rely on Channel State Information (CSI), collecting this data on typical IoT devices often requires elevated operating system permissions and specialized drivers. Consequently, this paper investigates the feasibility of utilizing Received Signal Strength Indicator (RSSI) data to predict human locations. RSSI was selected because it is accessible even on devices with limited user permissions, and therefore is more applicable to a wider array of IoT devices. To bypass the tedious process of obtaining training data needed to train an RSSI-based model, an existing Wi-Fi pose prediction project was used in this research. However, that project assumed CSI data as input. Therefore, we investigate the feasibility of cross-domain inference, i.e., feeding RSSI data into that existing CSI-based model. We collected an RSSI dataset, synchronized with video ground-truth of a person moving within a room, to evaluate the model's performance. This evaluation confirmed that RSSI data can predict locations with approximately 80% confidence when human movement is present. This demonstrates that a model trained on CSI data can be used to evaluate low-granularity RSSI data consisting of decibel-milliwatt (dBm) values to roughly locate people in the collection space. These results imply that a wide range of IoT devices can be used for privacy invasion in Wi-Fi-dense environments.

0.43

WiNeRF: Measurement Constrained Radiance Fields for Actionable Wireless Channel Modeling

cs.NI cs.LG ·2026-08-24 ·Saif Ur Rahman, Rafid Umayer Murshed, Anton Dmitriev, Cagri Tanriover, Rahul C. Shah +1 more
published similarity 0.65
Abstract · Accepted to EWSN 2026

Wireless embedded systems increasingly rely on wireless channel information for decision making, yet practical platforms operate under severe constraints, including few antennas, narrow bandwidth, and sparse, noisy measurements. While neural field based approaches inspired by Neural Radiance Fields (NeRFs) have recently been explored for continuous wireless channel modeling, existing approaches depend on dense measurements or external priors such as known geometry, visual context, or angle-of-arrival (AoA) information, limiting their practicality in real-world deployments. We present WiNeRF, a neural field framework that learns a spatially continuous, complex-valued wireless channel representation directly from sparse channel state information (CSI) collected by commodity WiFi devices. WiNeRF embeds intrinsic system constraints, such as antenna geometry, limited spatial resolution, and phase uncertainty, as inductive biases through a 3D conical wave sampling model, a multi-resolution implicit scene representation, and a differentiable optimization framework for complex-valued channel learning. Across diverse indoor environments with non-line-of-sight (NLoS) regions, WiNeRF achieves a median prediction SNR of 5.3 dB, outperforming prior neural baselines by 4.9 dB on average (approximately 3x higher prediction SNR), and produces a task-agnostic channel representation that can be directly reused in standard signal-processing pipelines, including beamforming, AoA estimation, and RSSI coverage mapping, without modifying existing hardware or wireless protocols.

0.37

Dataset and Experimental Testbed for Deep Learning-Based Bluetooth Device Fingerprinting

eess.SP cs.CR ·2026-10-30 ·Haytham Albousayri, Bechir Hamdaoui
similarity 0.64
Abstract · 6-page paper; accepted and presented at the Experimental Research on Networking (ERN 2026) workshop, part of 17th International Conference o…

AI-enabled wireless networks have emerged as vital components of future-generation wireless communication systems. Among various wireless architectures, Bluetooth Low Energy (BLE) networks have attracted significant research interest due to their widespread adoption and low cost. In these networks, deep learning (DL) models can be integrated directly into the physical-layer infrastructure to perform diverse tasks, including environment sensing, localization, radio frequency fingerprinting (RFFP), and signal denoising. While highly effective under their original training configurations, these DL models often fail significantly when deployed in unseen environments---such as different rooms, varying temperature conditions, or altered carrier frequencies. Addressing this limitation requires rigorous benchmarking of models and algorithms against unseen configurations to evaluate their generalization and robustness. To bridge this gap, this paper makes two key contributions: i) we introduce a comprehensive, large-scale wireless BLE dataset consisting of raw IQ transmissions from 31 distinct commercial devices captured across diverse days, locations, environments, temperatures, receiver hardware, and frequency channels; ii) we present a case study evaluating state-of-the-art techniques for domain-robust RFFP to advance real-world AI reliability.

0.28

Domain Generalization for Smartphone-Based Human Activity Recognition: A Systematic Analysis of Components and Interactions

cs.AI ·2026-09-14 ·Otávio Oliveira Napoli, Edson Borin
benchmark similarity 0.64
Abstract · 27 pages, 14 figures, and 10 tables

Smartphone-based Human Activity Recognition (HAR) models often degrade under distribution shifts caused by changes in users, devices, sensor placements, environments, and acquisition protocols. Domain Generalization (DG) addresses this problem by learning from source domains without access to target data. Existing DG methods span training objectives, representation initialization, and architectural modifications, but these components are typically evaluated in isolation despite operating at different stages of the learning pipeline. We present a large-scale controlled benchmark of DG for smartphone-based HAR, comprising more than 410,000 experiments across four model architectures, thirteen training objectives including Empirical Risk Minimization (ERM), five initialization strategies, four architectural configurations, and two shift scenarios: cross-dataset and cross-position. Results show that individual DG components provide limited and highly conditional gains. Alternative objectives rarely outperform ERM consistently, self-supervised initialization helps in specific settings, and architectural modifications, particularly Dynamic Domain Generalization, provide the clearest standalone improvements. Joint configurations, however, frequently outperform their individual components and exhibit complementary and sometimes super-additive interactions, although gains remain model- and shift-dependent. Class-level analysis shows that the strongest configurations mainly improve difficult, shift-sensitive decision boundaries. Finally, oracle checkpoint analysis reveals substantial unrealized performance: source-validation selection recovers only 53% and 26% of the available oracle gain in cross-dataset and cross-position settings, respectively. Overall, effective HAR domain generalization requires jointly designing DG components and robust model-selection strategies.

0.15

Physics-Informed WiFi Sensing for Robust 3D Human Pose Estimation in Mobile and Cross-Environment Settings

eess.SP ·2026-08-25 ·Kaixuan Huang, Yuanbo Chen, Guangjin Pan, Shiyi Mu, Tao Yu +2 more
similarity 0.64
Abstract · 12pages 6figures

Device-free human pose estimation using commodity WiFi signals has emerged as a promising paradigm for pervasive sensing in mobile computing systems. However, existing approaches often suffer from severe performance degradation when deployed across heterogeneous environments due to complex multipath propagation and domain shifts in wireless signals. In this paper, we present a physics-informed WiFi sensing framework for robust 3D human pose estimation under mobile and cross-environment settings. Our approach explicitly models wireless signal propagation characteristics and incorporates multipath-aware attention to capture environment-dependent signal variations. To further improve generalization, we introduce a disentangled representation learning scheme that separates pose-related features from environment-specific factors, enabling effective cross-domain adaptation without requiring extensive retraining. We implement our system using commodity WiFi devices and evaluate it on multiple public benchmarks, including Person-in-WiFi-3D and MM-Fi, as well as real-world deployments across diverse indoor environments. Experimental results demonstrate that our framework significantly improves robustness and generalization performance compared to state-of-the-art methods, particularly under cross-environment scenarios. These results highlight the potential of physics-informed wireless sensing for enabling reliable, scalable, and infrastructure-free human-centric applications in mobile computing systems.

0.12