CS Paper Radar

AutoXRD: Autonomous LLM Agents and Comprehensive Evaluation for Powder Diffraction Analysis

Yuetong Wu, Maojun Sun

cs.AI cond-mat.mtrl-sci ·submitted 2026-08-30 18:05 UTC · v1

Abstract

Powder X-ray diffraction (XRD) is central to materials characterization, yet reliable end-to-end automation remains challenging. An XRD agent must interpret diffraction evidence, operate refinement software, manage coupled parameters in a defensible order, and distinguish numerical improvement from physical validity. In this paper, we propose AutoXRD, an autonomous large language model (LLM) agent framework that organizes powder-XRD analysis as stepwise refinement, grounds actions in observed evidence, and applies deterministic crystallographic and physical checks before accepting results. We further introduce XRDBench with two complementary tracks. XRDBench-QA contains 100 bounded diagnostic tasks that isolate scientific reasoning and decision-making, whereas XRDBench-E2E contains 34 executable workflows that test whether agents can compose these capabilities into complete analyses requiring file inspection, crystallographic-software execution, iterative refinement, evidence preservation, and reporting. We evaluate ten recent LLMs across 1,340 model--task runs. Models average only 57.8 out of 100, falling from 61.9 on XRDBench-QA to 53.7 on XRDBench-E2E. They perform best on refinement-history assessment and result acceptance, but remain substantially weaker on refinement-action selection, phase quantification, indexing, and Rietveld refinement. GPT-5.6 Sol achieves the highest overall score of 81.1, GPT-5.6 Terra the highest XRDBench-E2E point estimate of 81.0, and GPT-5.6 Luna the best score--cost trade-off. Ablations show that all six AutoXRD components consistently improve performance, supporting the framework design. Finally, execution-trace analysis reveals recurring failures in coupled-parameter control, quantitative reasoning, evidence preservation, and workflow termination, motivating stronger scientific constraints, uncertainty-aware decisions, and more efficient planning.

Closest papers

Nearest neighbours by meaning across the whole index.

A self-learning scientific agent for X-ray diffraction

cs.AI cond-mat.mtrl-scics.LG ·2026-10-06 ·Bin Cao, Huichi Zhou, Runyu Yang, Jingsong Li, Shuchen Sun +5 more
similarity 0.74
Abstract

A central challenge for scientific agents is to turn analytical experience into reusable expertise grounded in physical evidence. Here we introduce Gan Jiang, a self-learning agent for powder X-ray diffraction built on a diffraction-analysis ecosystem we developed: XMatcher, XQueryer, XDecomposer and WPEM. Together, these engines span phase identification, multiphase decomposition and physics-constrained whole-pattern modelling. Gan Jiang converts analytical experience into executable skills by diagnosing failures, revising skill instructions and code, and validating revisions before reuse, without retraining the language model or changing the underlying physical models. Skills selected using development data and frozen before held-out evaluation achieve higher refinement scores than the original expert-designed skills across FullProf, GSAS-II and PyWPEM. The agent resolves strongly overlapping reflections, quantifies a five-phase ancient Egyptian cosmetic, tracks lattice evolution in an operating battery and compares atomic configurations in a disordered oxide catalyst. On DeltaXRDbench, it leads the evaluated methods in single- and multiphase identification across simulated and experimental data. Without supplied composition, single-phase top-1 accuracies reach 96.30\%, 81.78\% and 40.83\% on MP500, RRUFF and opXRD, respectively, compared with 58.00\%, 58.47\% and 26.45\% for the strongest comparator. These results demonstrate how an integrated scientific tool ecosystem can support agents that extract structural knowledge from measurements while accumulating validated analytical expertise that transfers to new samples.

0.37

Diagnosing and narrowing the simulation-to-real gap in powder X-ray diffraction with a wet-dry agentic loop

cs.MA cond-mat.mtrl-sci ·2026-08-23 ·Shaoguang Wang, Weiyu Guo, Ben Fei, Xiaohong Shao, Zhihui Wang +1 more
similarity 0.73
Abstract · The authors have determined that the manuscript in its current form has not yet reached the level of completeness and refinement intended fo…

Powder X-ray diffraction (PXRD) is the routine probe of crystalline matter, yet its analysis is the rate-limiting step as laboratories automate acquisition. Deep-learning analyzers excel on simulated patterns and degrade on measured ones. This simulation-to-real gap is structural, not additive: synthetic denoising gives no measurable lift on real spectra, whereas correcting a small peak-position drift more than doubles median retrieval correlation. Real-spectrum fine-tuning, peak-aligned reranking, and recalibration narrow what remains and restore the coverage synthetic anchors lose. Xtalyst integrates these in an agent-orchestrated system spanning phase identification, refinement, and calibrated property prediction. On a frozen held-out partition (n=534) each module measured on both splits reproduces its development finding -- including the synthetic-anchor under-coverage, whose magnitude differs between the two pools -- while held-out refinement converges and preserves symmetry without reaching profile-quality fits, and on a diffractometer its wet-dry recommend-rescan-reanalyze loop flips a blinded silicon standard to a gated PASS and changes which minor phase is resolved on a multi-metal alloy.

0.26

Verifiable pXRD: Hill-climbing pXRD structure determination with LLM agents

cs.AI ·2026-11-12 ·Samuel Chen, Jiaru Bai, Austin Henry Cheng, Varinia Bernales, Alán Aspuru-Guzik
publishedbenchmark similarity 0.71
Abstract · NeurIPS 2026 Workshop AI4Mat, spotlight (earlier version)

Autonomous crystal-structure determination from powder X-ray diffraction (pXRD) remains a key bottleneck for self-driving materials laboratories. We formulate the task of pXRD structure determination as a verifiable agentic search problem: candidate structures can be assessed during inference through forward-simulated profile agreement and during evaluation through structural matching to a known reference. To benchmark progress, we introduce pXRD-Bench, a suite of 200 simulated single-phase problems spanning in-distribution structure determination, challenging and polymorphic structures, and controlled compositional and topological distribution shifts. Agent adaptation raises selected structural recovery from 27% to 69%, with further gains from repeated sampling and verifier-guided inference-time scaling. We extend this approach to experimental multiphase pXRD through a reflexive evolution framework that learns from self-generated synthetic problems. A replaceable laboratory specification defines the sample family and measurement conditions. An evolver agent uses the known generating structures and measurement parameters to diagnose solver failures and develop persistent guidance and executable tools, which are then provided to agents on measured patterns. This supplies verifiable training experience without requiring a collection of solved experimental measurements. On 15 measured patterns from solid-state synthesis, the evolved package improves average profile agreement and transfers an analogue-substitution procedure that recovers a phase whose structure is absent from the supplied reference library. These results demonstrate how learning from verifiable synthetic experience can improve agentic characterization of experimental samples whose structures are not known in advance.

0.16

PXRD-Bench: How Close Are We to Determining Crystal Structures from Powder Diffraction?

cs.AI cond-mat.mtrl-sci ·2026-10-12 ·Dongyeop Woo, Nofit Segal, Nayoung Kim, Minkyu Kim, Rafael Gomez-Bombarelli +1 more
benchmark similarity 0.71
Abstract

Determining crystal structures from powder X-ray diffraction (PXRD) would enable routine characterization of newly synthesized materials, including those absent from reference databases. Generative models offer a promising approach, but existing evaluations remain fragmented and largely assume single-phase samples with known composition. To fill this gap, we introduce PXRD-Bench, a unified benchmark that extends evaluation to unknown per-element atom counts and recovery of both structures in two-phase mixtures. It provides approximately 4.1 million training structures with simulated PXRD, tests generalization to unseen compositions and structural prototypes, and evaluates recovery from experimental PXRD after excluding structurally matching training entries. To provide a strong reference baseline, we also introduce Bragglite, a PXRD-to-structure model developed through a systematic study of PXRD modeling choices. It achieves a 44.2\% Top-1 match rate on experimental RRUFF patterns with known composition, 24.6\% above the strongest prior baseline. Further analysis yields several key findings: some models fail to benefit from experimental PXRD, while generalization to unseen structural prototypes and recovery from two-phase mixtures remain challenging. Together, our benchmark, systematic studies, and Bragglite clarify the capabilities and limitations of current PXRD-to-structure models.

0.29

PowderLine: a programmatic powder diffraction analysis application

cs.SE cond-mat.mtrl-sciphysics.data-an ·2026-08-17 ·Adam A. Corrao, Jennifer A. Perez, John D. Langhout, Megan M. Butala, Thomas A. Caswell +1 more
similarity 0.66
Abstract · 11 pages, 3 figures

Whole-pattern fitting methods, such as Rietveld refinement, excel at extracting detailed structural, chemical, and microstructural information from powder diffraction data. Obtaining reliable results requires both considerable expertise and software-specific knowledge, and applying these methods at scale typically relies on custom scripts written for each application. High-throughput experiments and autonomous self-driving laboratories increasingly utilize powder diffraction analysis to proceed programmatically and to return structured, machine-readable results. Here, we introduce PowderLine, a Python application that encapsulates a complete refinement into a single declarative recipe, validates that recipe against a versioned schema, and executes it through refinement software to return structured results. The refinement recipe is an all-inclusive, machine-readable and -writable description of either Rietveld or single peak analysis that users, scripts, and automated agents can specify and run in the same way. As a result of PowderLine's composability, it naturally fits into interactive, scripted, and autonomous workflows alike.

0.27

InformedXRD: Reproducible Benchmarks and Physics-Informed Evaluation for Powder Diffraction Symmetry Classification

cs.LG cond-mat.mtrl-sci ·2026-11-01 ·Edward G Friedman, Elizabeth J. Baggett, Abhishek Shetty, Derrick Chan-Sew, Vanellsa Acha +3 more
top venuebenchmarkcode/data similarity 0.64
Abstract · Camera-ready version. Accepted at NeurIPS 2026, Track on Evaluations and Datasets. 10 pages main text plus appendices and checklist (27 page…

Machine learning for powder diffraction (PXRD) symmetry classification is being trained at scale, yet the field lacks a common evaluation standard: papers report results on different subsets of experimental archives, with different target taxonomies, preprocessing, and metrics, and published models are rarely released in a form that permits rescoring. We present InformedXRD, an evaluation framework with three parts: (i) a machine-readable mapping from 230 space groups to 99 extinction groups, the finest classes powder diffraction can identify from systematic absences alone; (ii) a benchmark-construction method whose inclusion rules are specified as code and reproduce from a frozen snapshot, instantiated as RRUFF-473, RRUFF-325, and, as a small example, opXRD-98; (iii) a reporting protocol with prior-only frequency baselines, a label-permutation test, a hierarchy-aware error metric on the condensed translationengleiche subgroup graph, and stratified evaluation. We build on the mapping, RRUFF benchmarks, subgroup graph, and four ViT checkpoints released in our earlier work (Baggett et al., 2026). Using these checkpoints, a 1D residual CNN, and six architectures trained under the XRDBench recipe (Cao et al., 2025), we show that evaluation design changes what conclusions are justified: paired tests point in different directions at Top-1 and Top-5; paired Top-k tests do not separate the three leading XRDBench models, while hierarchy-aware analysis describes error distance and direction across all six; an input-blind frequency predictor matches the models on aggregate Top-k, yet a label-permutation test still detects pattern-specific evidence; and stratified analysis exposes a label-entropy confound that aggregate accuracy hides. All mapping tables, benchmark code, scripts, and checkpoints are released as shared infrastructure for PXRD-ML evaluation.

0.43

Benchmarking language models and agents for scientific reasoning in evolving materials laboratories

cs.AI cond-mat.mtrl-scics.CEcs.LG ·2026-11-09 ·Xuyu Dong, Yixuan Li, Jianguo Huang, Feng Chen, Yiyun Zhou +3 more
similarity 0.64
Abstract · 36 pages, 5 figures, 2 tables

Large language models and the multi-agent systems built around them could accelerate materials discovery by connecting scientific knowledge with experimental decisions. Existing benchmarks establish capabilities in domain knowledge, multimodal interpretation and scientific tool use. As language models increasingly support materials research workflows, their ability to distinguish closely related material states and reason accurately with quantitative evidence remains insufficiently evaluated. These abilities are essential for comparing material responses, assessing mechanisms and maintaining reliable judgements as experimental evidence accumulates. We introduce MatScope to evaluate three connected capabilities. M1 tests unaided, condition-specific reasoning through 200 tasks spanning ten research functions, using aluminium and high-entropy alloys as representative material systems. M2 tests agent-assisted transfer of related knowledge to unresolved materials questions. MatEvoBench-20 tests initial forecasts across scientific dependency chains and revisions of still-hidden responses as observations accumulate. Across eleven model deployments, including GPT-6 Astra and Claude Fable 5.1, given-input calculations and many physical explanations are handled well. Fine-grained response estimates, comparisons between similar states and quantitatively supported choices remain substantially weaker. Related literature improves selected estimates, while condition and baseline mismatches limit transfer. Progressive observations calibrate some downstream responses and destabilize earlier accurate predictions. MatScope establishes measurable targets for developing reliable scientific reasoning in future self-evolving materials laboratories and materials-aware world models.

0.15

Hypothesis-Driven Autonomous Materials Synthesis with Multimodal LLM Agents

cs.AI cond-mat.mtrl-sci ·2026-09-16 ·Izumi Takahara, Kazunori Nishio, Akira Aiba, Shigeru Kobayashi, Takao Nakajima +2 more
similarity 0.63
Abstract

Self-driving laboratories can explore synthesis conditions autonomously, but their decision-making layer is typically a black-box optimizer, and the output is a set of optimized samples, with the measurements reduced to predefined scalar objectives and the reasons behind success left unarticulated. Here we present SynAgent, a framework in which large language model agents operate an automated experimental system and maintain an explicit, revisable understanding of the synthesis process as the campaign's primary output. Starting with no predefined analysis pipeline, SynAgent adaptively generates analysis skills for newly acquired data and evolves this understanding through multimodal reasoning over experimental data such as X-ray diffraction patterns and electron micrographs. The evolution is guided by a verify-falsify scheme, in which the agent deliberately challenges its own hypotheses by testing conditions predicted to fail as well as those predicted to succeed. In a single campaign of 18 autonomous experiments using LiCoO2 (001) thin-film deposition as a testbed, SynAgent synthesized highly crystalline films and evolved an understanding of how the substrate temperature governs crystallization, discovering an abrupt threshold and a narrow optimal growth window at 650-690 °C. These results extend autonomous experimentation beyond optimized samples to testable, human-readable understanding.

0.30