CS Paper Radar

Inverse kinematic solution for generic 3R positional robots using Conformal Geometric Algebra

Abhilash Nayak, Durgesh Haribhau Salunkhe

cs.RO ·submitted 2026-08-31 20:01 UTC · v1
publishedunusual

Abstract

The inverse kinematics of generic 3R robots has been investigated through multiple approaches, mainly algebraic methods involving the solution of certain equation sets. Previous geometric interpretations of the solution, characterized as the intersection of a pair of conics have been confined to the joint-space domain. In this article, we study the Inverse Kinematic Model (IKM) of 3R robots, using the advantages of Conformal Geometric Algebra (CGA) to provide further insights on its kinematic properties. Our approach directly yields a univariate polynomial in terms of theta_2 without the need to eliminate theta_1 and theta_3 by reframing the problem as the intersection of two circles, which are fundamental elements within this algebraic framework.

Journal ref
In: Holderbaum, W., Selig, J.M. (eds) Advances in the Mathematics of Robotics. IMA 2025. Springer Proceedings in Advanced Robotics, vol 39. Springer, Cham
DOI
10.1007/978-3-032-10510-3_8

Closest papers

Nearest neighbours by meaning across the whole index.

Geometric analysis of generic 3R robots, and necessary and sufficient conditions for a class of orthogonal robots to have four IKS

cs.RO ·2026-08-31 ·Durgesh Haribhau Salunkhe, Abhilash Nayak
publishedunusual similarity 0.83
Abstract

The kinematic analysis of a generic 3R robot has been investigated with multiple approaches in the past. The algebraic approaches have established concrete results but are unfortunately limited to special classes or architectural simplifications. Geometric approaches on the other hand have extended the analysis to generic robots while also providing an intuitive understanding of their kinematic properties. We use the best of both approaches to present the kinematic analysis of a generic 3R robot, using the inverse kinematic model inherited from a method based on conformal geometric algebra. The paper discusses a generic framework to study the conditions for a 3R robot to have four inverse kinematic solutions (IKS) and allows to study the distribution of IKS as seen in workspace. The necessary and sufficient conditions for a class of orthogonal robots are presented using the proposed approach.

0.51

Real-Time Conformal-Seeded Hybrid Inverse Kinematics for Offset Redundant Manipulators

cs.RO eess.SY ·2026-10-03 ·Duc Cuong Vu, Van Tung Nguyen, Duc Hai Nguyen, Manh Cuong Nguyen, Vu Trung Tran +1 more
top venuetheory similarity 0.60
Abstract

This paper presents a conformal-seeded hybrid strategy for solving inverse kinematics of offset, redundant 7-DoF robot arms of the humanoid class. Analytical inverse kinematics (AIK) provides closed-form solutions with very low computational cost. However, for offset kinematic structures, the exact closed-form solution is generally unavailable, and practical AIK must rely on an approximate or simplified kinematic model. In contrast, numerical inverse kinematics (NIK) can achieve high-precision solutions on the full kinematic model. However, its convergence is highly sensitive to initialization. To overcome these limitations, we propose a two-stage hybrid inverse kinematics framework with conformal-calibrated seed selection. First, an approximate analytical model efficiently enumerates a finite set of candidate joint solutions. Second, we rank these candidates using a lightweight learned predictor of post-refinement difficulty, wrapped by split-conformal prediction into a calibrated upper bound that serves as the selection score. The best-ranked seed is then refined using a Levenberg-Marquardt solver on the full kinematic model. The proposed method combines fast candidate generation, learned seed ranking with a calibrated difficulty bound, and accurate numerical refinement, achieving real-time performance of less than 40us and a success rate of 100% in our evaluation on reachable targets. We validate the approach through large-scale stochastic simulation across the workspace and experimental demonstrations with motion planning on a humanoid robot arm. Demonstration videos are available at https://youtu.be/aeiBmw1XRbw.

0.50

Planning along Differentiable Charts of Constraint Manifolds with General-Purpose IK Solvers

cs.RO ·2026-09-09 ·Thomas Cohn, Seiji Shaw, Harel Biggie, Travis Manderson, Nicholas Roy +1 more
theory similarity 0.53
Abstract · 8 pages, 4 figures, 3 tables. Under review. Project website: https://cohnt.github.io/inverse-function-theorem-parameterization/

Planning trajectories for robot manipulators under kinematic equality constraints restricts feasible motions to a measure-zero submanifold of the configuration space, requiring special algorithmic treatment. A promising strategy is parametrizing the set of feasible configurations using analytic inverse kinematics (IK). Bespoke analytic IK functions can be written to be differentiable, a necessary property for gradient-based trajectory optimization. But the vast majority of IK functions are computed by automated meta-solvers like IKFast, and are difficult to modify for differentiability. We present a new approach for computing gradients of analytic IK parameterizations: we leverage the inverse function theorem to recover the desired gradients from the ordinary forward kinematic Jacobian. Furthermore, we present a least-squares domain extension and an optimization-amenable description of the reachability constraint, which preserves gradient signal outside the reachable workspace. We demonstrate the efficacy of our approach through numerical experiments and downstream tasks, including a hardware demonstration of an RB-Y1 picking up a box and placing it on a table. Project website: https://cohnt.github.io/inverse-function-theorem-parameterization/

0.54

Inverse Kinematics in Endoscopic Scenarios using MoveIt

cs.RO ·2026-11-16 ·Marc Bestmann, Timon Engelke, Rebecca Rodeck, Gerko Wende
benchmark similarity 0.52
Abstract · 6 pages, 8 figures

Inverse kinematics are critical in many robotic applications, yet standard MoveIt-based solvers struggle in confined scenarios. This paper provides a benchmark of the available solvers and compares multiple practical modifications for improving the performance of the solvers. Splitting the IK problem into two parts results in the best performance, leading to a 100% success rate under 100 ms in an endoscopic tank scenario.

0.29

FWIK: Multi-Waypoint IK Selection via Lookahead Graph Search

cs.RO ·2026-11-04 ·Jinglan Cao, Guohui Zhong, Chengwei Zhang
similarity 0.49
Abstract

An ordered sequence of end-effector poses can give a redundant robot arm multiple valid joint configurations at each waypoint. Inverse kinematics (IK) computes these configurations. Choosing a configuration only for the next waypoint can leave the arm poorly placed for later waypoints. This may increase planned motion time or cause a later planning failure. This paper presents Future-Window Inverse Kinematics (FWIK), an online method that selects IK solutions by considering a small window of future waypoints. FWIK generates several IK candidates, connects them in a layered joint-space graph, and ranks candidate paths with a simple motion-time estimate. A learned model removes paths whose transitions are likely to cause self-collision. A standard MoveIt 2 planner then checks the next-waypoint IK goals from the remaining paths in ranked order, and the first goal that yields a valid trajectory is selected for execution. We evaluate FWIK in simulation on two 7-DoF manipulators, the Franka Emika Panda and the KUKA LBR iiwa. Each method-planner setting contains five repetitions of 100 sequences with 50 waypoints. Across Pilz, RRT-Connect, CHOMP, and STOMP, FWIK completes 96.8-100% of sequences and gives the shortest planned trajectory duration in all eight robot-planner settings. Its mean duration is 12.8-13.1% lower than STAMPEDE, 22.5-25.6% lower than IKLink, and 27.5-37.2% lower than retry-based TRAC-IK. The results show that a small future window can improve sequence completion and reduce planned motion time while leaving final trajectory validation to the motion planner.

0.17

Higher-Order Kinematic Derivatives for Aspect-Preserving Real-Time Numerical Inverse Kinematics

cs.RO ·2026-10-30 ·Steffan Lloyd
similarity 0.49
Abstract · 15 pages, 9 figures, 3 tables

This paper leverages the higher-order kinematic derivatives of serial robots to achieve efficient, aspect-preserving real-time inverse kinematics. First, a family of higher-order solvers is derived, with a necessary orientation-error correction map, yielding the QuIK4 and QuIK5 methods with fourth- and fifth-order convergence. Second, an aspect-preserving step limiter extrapolates the Jacobian determinant along the step to predict and avoid singularities, shortening steps only when they head toward a singularity rather than when the current iterate is ill-conditioned. Third, a Hermite-interpolation certifier verifies the aspect of each answer, and a certified restart algorithm recovers failures from proven same-aspect seeds. The proposed methods are shown to outperform prior methods, reducing failures by up to four orders of magnitude and nearly eliminating aspect switching at tracking-level errors. A C++ library is released with ROS 2 integration.

0.25

Analytic Robot Self-Model: Learning Screw-Axis Kinematics for Rendering and Model-Based Control

cs.RO ·2026-10-11 ·Xu Chen, Ning Tan
similarity 0.48
Abstract · 26 pages, 6 figures, supplementary information included

Visual self-modelling lets robots learn body models from observations, but such models usually encode kinematics implicitly rather than exposing metric joint parameters for computation and control. Moreover, a good fit to images does not by itself establish accurate kinematics. Here we present an explicit analytic robot self-model that requires neither deformation networks nor URDF/CAD templates. Multi-view images and joint readings establish Gaussian appearance and provide motion evidence for rigid link assignments, whereas sparse end-effector poses independently identify metric screw axes. The resulting closed-form forward kinematics and analytic Jacobian can be evaluated beyond the fitting ranges. We validate the model on a simulated seven-axis arm, a simulated twelve-joint quadruped and a real six-axis arm. In simulation, it achieves millimetre-level reaching and pick-and-place, as well as closed-loop quadruped walking. On the real arm, it renders held-out configurations, predicts end-effector positions with a median error of 6.4 mm, compared with 11.7 mm for a calibrated nominal model, and supports reaching with external marker feedback. A controlled comparison shows that image fit alone is not enough: two Panda models differing only in their joint axes are 0.55 dB apart in PSNR, yet their end-effector prediction errors differ 13.7-fold.

0.30

Modular Kinematic Reduction of Closed-Chain Mechanisms Using Path Assembly and Defect Homotopy

cs.RO ·2026-09-10 ·Mohammad Dastranj, Jouni Mattila
highly cited similarity 0.48
Abstract

Closed kinematic chains complicate modular modeling by coupling active and passive coordinates through nonlinear closure constraints. This paper presents a Path-Assembled Closure Differential Mapping (PACDM) framework for modular closure resolution and kinematic reduction. Each closure element compares two ordered transformation paths with common endpoints, with their mismatch expressed through the logarithm on SE(3) and the corresponding Jacobian assembled from local transformation derivatives. Multi-path modules are constructed from a minimal set of pairwise closure elements, while rank-revealing analysis selects locally independent scalar constraints. A defect homotopy recovers closure-consistent passive coordinates from approximate estimates along a feasible and regular continuation path. At regular configurations, implicit differentiation yields the local active-to-passive differential mapping, which is subsequently used in a predictor-corrector continuation procedure for prescribed motion. The framework is evaluated on a seven-degree-of-freedom heavy-duty manipulator containing two-path and three-path closed-chain modules. Comparison with Simscape Multibody yields trajectory root-mean-square errors below 8.5 x 10^-10 rad, while predictor-corrector continuation is approximately 45.8 times faster than applying defect homotopy at every trajectory sample.

0.52