CS Paper Radar

AM-Bench: A Modular Simulation Suite and Benchmark for Aerial Manipulation Policy Learning

Yutong Wang, Dongjae Lee, Xiaofeng Guo, Yuanzhu Zhan, Yufei Jiang, Bavin Saravanan, Muqing Cao, Jia Xie, Chenyang Mao, Sebastian Scherer, Junyi Geng, Guanya Shi

cs.RO ·submitted 2026-09-01 03:20 UTC · v1
benchmarkhighly cited

Abstract

Standardized benchmarks have played a central role in advancing robot manipulation learning, yet most focus on ground-supported manipulation systems, which limits their applicability to dynamics-critical domains such as aerial manipulation (AM). AM presents distinct system-level challenges, including environmental disturbances, coupled dynamics between the manipulator and floating base, and constrained degrees of freedom. Consequently, task performance depends jointly on robot embodiment, low-level control, and high-level policy design. We introduce AM-Bench, a modular simulation suite and benchmark for multirotor-based AM policy learning. AM-Bench includes representative embodiments spanning underactuated, fully actuated, and overactuated systems, 12 tasks across contact, transport, and constrained interaction, configurable aerodynamic disturbances and actuator saturation, standard low-level controllers, and baseline policy-learning algorithms. Unlike prior manipulation benchmarks that primarily emphasize end-to-end policy performance, AM-Bench enables system-level evaluation of how embodiment, control, disturbances, and policy choices interact. We demonstrate its diagnostic value through three simulation studies spanning high-level policies, policy--control interfaces, and embodiments, together with real-world validation of modeled effects and a hardware test of the learning pipeline.

Comment
28 pages, 7 figures, 15 tables

Closest papers

Nearest neighbours by meaning across the whole index.

Adaptive Aerial Loco-Manipulation Policy Learning via LLM-Assisted Proactive Task Generation

cs.RO ·2026-10-22 ·Jingyu Ru, Xiangyuan Xie, Lixuan Jin, Jian An, Xingming Zhang +6 more
similarity 0.80
Abstract

Loco-manipulation extends the workspace of conventional manipulation by combining mobility with physical interaction, while aerial loco-manipulation further expands this capability into three-dimensional space, enabling robots to reach environments inaccessible to ground-based systems. Moving to an aerial platform, however, gives rise to a demanding control problem, since the vehicle must track trajectories accurately in three dimensions while the motion of the arm and its interaction with the environment continuously shift the center of mass, alter the inertia, and impose force and moment disturbances on the body. Conventional controllers address these effects through explicit models and estimation, whereas learning-based controllers infer dynamics from experience, yet control rewards provide no direct target for the response information retained from history, and fixed task sampling can leave persistent tracking difficulties insufficiently explored. We present ALMA, an aerial loco-manipulation framework for adaptive flight control under external arm commands. ALMA employs a contextual flight policy that adapts from recent measurements and actions, using action-conditioned prediction of future measurement representations to train its context to retain response information relevant to flight control. To expand the experience available for this adaptation, an evolutionary process uses a large language model (LLM) to analyze observed control difficulties and propose new structures of arm motion for subsequent training. In simulation, ALMA reduces position root-mean-square error (RMSE) by up to 24.7% relative to the strongest baseline, while the same policy transfers zero-shot to the aerial manipulator and reduces hover position RMSE by 79.6% during periodic arm motion relative to the real-world baseline.

0.13

AeroManip-VLA: Scalable Vision-Language-Action Learning for Aerial Manipulation with RL-Generated Demonstrations

cs.RO cs.AI ·2026-09-29 ·Rui Huang, Yanlin Mu, Lidong Li, Yucong Wang, Zichen Yan +1 more
benchmark similarity 0.79
Abstract · https://ruihuangnus.github.io/AeroManip-VLA-page/

Aerial manipulators extend robotic manipulation into 3D workspaces that are difficult for ground-based robots to access, creating new opportunities for general-purpose manipulation. However, extending Vision-Language-Action (VLA) models to aerial robots introduces distinct challenges due to the tight coupling between manipulation and flight, continuously changing observations, and safety-critical physical interactions. These challenges demand diverse training data and systematic policy evaluation, yet collecting demonstrations and evaluating policies directly on physical aerial platforms are costly, difficult to scale, and hard to repeat under controlled conditions. We present AeroManip-VLA, a scalable benchmark for aerial VLA data generation and policy evaluation. AeroManip-VLA provides a GPU-accelerated simulation framework with low-level payload-aware flight and manipulation control in massively parallel environments. Building on this framework, we combine reusable reinforcement learning policies with expert task rules to automatically generate demonstrations without human teleoperation across diverse objects, environments, and randomized initial conditions. The generated data include basic skills such as grasping and placing, as well as long-horizon tasks that require both navigation and manipulation. We further introduce automated event labeling and trajectory categorization to filter demonstrations. These mechanisms enable fine-grained analysis of task progress, behavioral outcomes, and safety-related failures. Finally, we evaluate a range of imitation learning and VLA baselines across different task settings, revealing their performance characteristics and failure modes. Together, AeroManip-VLA enables scalable aerial manipulation data generation, structured trajectory analysis, and systematic VLA evaluation in simulation prior to real-world deployment.

0.24

Aerial Manipulation in the Wild with Onboard Perception, Policy Learning, and Whole-Body Control

cs.RO ·2026-09-24 ·Yuanzhu Zhan, Yufei Jiang, Zemu Zhang, Junyi Geng
published similarity 0.78
Abstract · 5 pages, 4 figures. Accepted by 5th Workshop on Mobile Manipulation and Embodied Intelligence (MoMA.v5) at IROS 2026

Aerial manipulation in outdoor environments remains challenging due to the simultaneous requirements of reliable state estimation, stable aerial motion, and precise manipulation under external disturbances. In this work, we present a real-world outdoor aerial manipulation framework that integrates imitation learning, onboard LiDAR-inertial state estimation, and whole-body model predictive control. A Diffusion Policy is trained from manipulation demonstrations to generate desired end-effector motions from onboard observations. These learned commands are executed by a whole-body MPC that jointly coordinates the aerial platform and manipulator to realize the desired end-effector trajectory. To eliminate reliance on external motion-capture infrastructure, the platform employs onboard LiDAR-inertial odometry for state estimation during outdoor operation. We validate the complete framework on a physical aerial manipulator and demonstrate successful execution of outdoor manipulation tasks. The experimental results show that demonstration-driven manipulation policies can be effectively integrated with onboard state estimation and model-based whole-body control to enable aerial manipulation beyond controlled indoor environments.

0.28

CALM: Decentralized Control of Cooperative Aerial Manipulation with Multi-Agent Reinforcement Learning

cs.RO cs.MA ·2026-10-13 ·Jiaxi Huo, Petre Ricioppo, Fausto Francesco Lizzio
similarity 0.76
Abstract · 8 pages

Cooperative aerial manipulation is difficult under wind, payload motion, and noisy goal broadcasts because multiple Unmanned Aerial Vehicles (UAVs) are coupled through a shared payload. We present CALM (Cooperative Aerial Learned Manipulation), a decentralized controller for aerial manipulators carrying a basket while tracking a moving ground robot. CALM combines a parameter-shared Multi-Agent Reinforcement Learning (MARL) policy, trained using Multi-Agent Proximal Policy Optimization (MAPPO), with goal estimation, per-UAV Extended State Observers (ESOs), basket-mass estimation, and anticipatory formation-yaw feedforward. The anticipatory formation-yaw feedforward uses estimated goal motion to rotate the formation before position error develops, reducing basket-yaw lag without adding net commanded force. A disturbance-conditioned critic supports centralized training while execution remains decentralized. Across held-out trajectories, CALM achieves lower mean position and orientation errors than all evaluated baselines, including the matched arm baseline (7.68 versus 10.95 cm and 3.3 versus 4.7$^\circ$), the cable-suspended realization, and two model-based controllers. Under unseen full-information-path degradation, CALM remains statistically comparable or superior to the arm baseline. Videos are available at https://petreric.github.io/CALM/.

0.19

Multi-CONDOR: Learning Multistable Motion Primitives from Demonstration

cs.RO cs.AI ·2026-11-16 ·Gabriele Giuseppe Di Marzo, Mariano Ramírez Montero, Maximilian Stölzle, Rodrigo Pérez-Dattari, Cosimo Della Santina
similarity 0.74
Abstract

Dynamical-system-based motion policies provide a framework for learning reactive robot motions with stability and convergence properties. Many manipulation tasks, however, admit several distinct goals or a continuous set of acceptable outcomes, requiring motion primitives that preserve these alternatives. Accommodating both goal structures within a unified framework with continuous, autonomous dynamics remains an open challenge. We propose a CONDOR-based framework, multi-CONDOR, for learning motion primitives with either multiple discrete attractors or a continuous attracting goal contour. The approach combines imitation learning with losses that encourage agreement between the learned task dynamics and latent reference systems encoding the desired attraction structure. We provide a Lyapunov-based analysis of the convergence properties of the learned motion dynamics. We evaluate the framework on simulated benchmarks with discrete goals, qualitative examples with continuous goal contours, and robotic grasping experiments. In simulation, multi-CONDOR reduces trajectory RMSE by approximately 72% compared with separately learned single-goal motion primitives selected by a state machine. For tasks with two and three goals, respectively, it reduces the fraction of evaluated initial states ending outside the goal tolerance from StableNODE's 0.31% and 7.29% to 0% in both settings. Experiments with a Franka Emika robot arm demonstrate successful grasping of a container by either of its two handles using motions learned from demonstrations. Together, these results show multi-CONDOR combines motion reproduction with the flexibility to converge to alternative valid outcomes.

0.24

ManiLadder: Benchmarking Robot Manipulation Through a Categorized and Multi-Difficulty Level Task Ladder

cs.RO ·2026-11-12 ·Chongkai Gao, Jieao Shi, Zhaoyu Mu, Yudi Lin, Xuanwei Liu +12 more
benchmark similarity 0.73
Abstract

Recent advances in robotic manipulation have enabled increasingly complex and dexterous behaviors, yet existing benchmarks still focus on simple pick-and-place tasks and lack a systematic framework for measuring progress in robot learning along the axis of task difficulty. We present ManiLadder, a large-scale and organized simulation benchmark for robotic manipulation. ManiLadder contains 112 carefully designed tasks stratified into 4 difficulty levels, with 8 categories in each level, spanning rigid-body and deformable-object manipulation, single-arm and dual-arm settings, and gripper and dexterous-hand end-effectors. To calibrate difficulty, we fix the data amount the same for every task and use a unified flow- matching imitation learning policy under the same training and evaluation protocols, then use its evaluation success rate as an operational empirical difficulty signal. All tasks are iteratively refined until they fall into target difficulty ranges, which are then verified across different random seeds, policies, and agentic learning systems. We further analyze the task properties, compare different policy performances and training settings, analyze task transfer and data scaling behaviors, and conduct real-world experiments showing that the designed tasks preserve their difficulty ordering beyond simulation. ManiLad- der provides a calibrated ladder for measuring, comparing, and advancing robotic manipulation capabilities. More results are available at https://maniladder-benchmark.github.io/.

0.14

FALCON-S: Fixed-wing ground-effect Aerodynamics Simulator and Flight Control Learning Suite

cs.RO cs.LGeess.SY ·2026-09-05 ·Matteo El Hariry, Pedro Lima, Andrej Orsula, Matthieu Geist, Miguel Olivares-Mendez
similarity 0.73
Abstract · Index Terms: Robot Learning, Flight Control, Reinforcement Learning, Autonomous Navigation, Control and Dynamics, Modeling and Simulation, W…

We present a modular, high-fidelity simulation framework for the development and benchmarking of flight control strategies in fixed-wing aerial robots operating near the ground. Unlike existing simulators that rely on simplified or hover-oriented dynamics, our framework models full 6DoF rigid-body physics, semi-empirical ground-effect aerodynamics, actuator dynamics, sensor noise, and environmental disturbances. This physical realism, combined with modular component design, enables systematic analysis of low-altitude flight behavior under realistic conditions. The simulator supports both CPU and GPU backends via Torch and NVIDIA Warp, enabling high-throughput parallel execution suitable for large-scale reinforcement learning training and optimal control rollouts. A unified interface accommodates a range of controllers (both RL and optical control algorithms) across tasks such as altitude regulation and trajectory tracking. Cross-validation with X-Plane and JSBSim is also supported to facilitate engineering integration and visual fidelity.

0.18

DexArena: A Unified Benchmark for Long-Horizon Dexterous Manipulation

cs.RO ·2026-11-02 ·Haonan Ping, Jianshu Hu, Yimin Wang, Yi Zhu, Pai Liang +10 more
benchmarkcode/data similarity 0.73
Abstract · Project page: https://sipair-elastic.github.io/DexArena-website/

Long-horizon dexterous manipulation remains a fundamental challenge for robot learning, requiring the composition of multiple skills, precise bimanual coordination, generalizable visual understanding, and robust skill transitions. Yet existing manipulation benchmarks largely emphasize isolated skills or support only a limited range of end-effectors, making these capabilities difficult to evaluate systematically. We introduce DexArena, a benchmark designed to evaluate learning and generalization in long-horizon bimanual dexterous manipulation. DexArena features 10 long-horizon tasks and 30 stage-level tasks spanning diverse household and industrial scenarios. Each long-horizon task is composed of explicitly defined stages with physically grounded success conditions, enabling reliable evaluation of both intermediate progress and end-to-end task completion. A unified benchmark interface and verified human-teleoperated demonstrations enable testing different policy learning algorithms, with standardized simulation configurations, scene randomization, trajectory replay, and task-level evaluation. Through extensive baseline experiments, we identify substantial challenges in precise manipulation, generalization to scene variation, and skill composition. DexArena establishes a challenging and reproducible benchmark for developing robot learning methods that move toward generalizable long-horizon dexterous behavior.

0.23