CS Paper Radar

LLM Inference on IMC-NoC Architecture with Balanced Dataflow and Fine-Grained Parallelism

Yimin Wang, Yue Jiet Chong, Xuanyao Fong

cs.AR ·submitted 2026-09-01 07:55 UTC · v1
published

Abstract

LLM inference has become an essential service, yet it imposes unprecedented demands on memory bandwidth, computational density, and communication efficiency. While IMC is a promising solution to the memory wall issue, the heterogeneous data dynamicity of LLM requires complementary resources to handle intermediate data generated during run-time. Furthermore, the massive number of parameters in LLM necessitates scale-up architectures where on-chip data movement is often the primary performance bottleneck. This article presents a hardware-software co-design framework that unifies distributed compute, memory, and communication into a seamless processing-communication fabric. On the hardware side, we propose a scalable architecture, named LEAP, that integrates IMC PE, NMC PE, and INC. This allows each hardware layer to execute specialized tasks: IMC for static weights, NMC for dynamic data, and INC for partial result reduction. On the software side, we introduce a partitioning, mapping, and scheduling framework optimized for key metrics in LLM serving, including throughput and latency. To address the distinct computational intensities of the prefill and decode phases, we present a prefill-decode disaggregation approach that dynamically reconfigures PE organizations to maximize resource utilization. Compared to commercial GPU platforms, the proposed architecture provides a throughput and an energy efficiency improvement of $\geq{}1.52\times$ and $24.91\times$, respectively.

Comment
11 pages, 15 figures, an extended version of LEAP ICCAD'2025

Closest papers

Nearest neighbours by meaning across the whole index.

HELIX: HEterogeneous LLM Inference with FleXible and Fine-Grained Partitioning

cs.SE ·2026-11-04 ·Victoria Clerico, William Simon, Corey Liam Lammie, Orhun Görkem, Athanasios Vasilopoulos +4 more
code/data similarity 0.71
Abstract

LLM inference is inherently heterogeneous, with performance bottlenecks shifting throughout inference phases down to individual operators. This has motivated heterogeneous serving systems that disaggregate execution across specialized accelerators, typically through fixed partitions such as prefill/decode or attention/FFN. However, these approaches commit to a partitioning strategy in advance, limiting their ability to adapt to different workloads and model architectures while forcing emerging accelerators into predefined roles. We present HELIX, a vLLM-based software stack that discovers, compiles and dispatches workload-aware partitions across heterogeneous accelerators at the operator granularity. At engine initialization, HELIX automatically determines hardware-specific operator placements that minimize execution latency, accounting for profiled execution costs, communication overheads, device capabilities, and memory constraints. It combines dynamic programming, piecewise compilation, and heterogeneous subgraph dispatch, enabling accelerators with partial operator coverage to participate in LLM inference without predefined model partitions. HELIX provides an open-source unified framework for exploring, evaluating, and integrating heterogeneous accelerators for LLM inference, lowering the barrier to emerging hardware by exposing them as subgraph executors. In systems combining H100 and B200 GPUs with emerging accelerators, HELIX resolves LLM partitions that multi-query decoding latency by up to 3$\times$ for dense and sparse transformer models and up to 3.5$\times$ for hybrid state-space models, relative to standard attention-FFN disaggregation.

0.31

LeanStream: A Speculate-and-Refine Streaming Framework for Efficient on-Device LLM Inference

cs.LG ·2026-09-02 ·Renyuan Liu, Yuyang Leng, Kaiyan Liu, Yuzhou Zhong, Shaohan Hu +5 more
top venuecode/data similarity 0.71
Abstract · 6 pages, 13 figures. Accepted at ACM MobiCom 2026. Code available at https://github.com/RenyuanLIU/LeanStream

On-device LLM inference is attractive for privacy and responsiveness, but remains challenging on mobile and embedded devices because model weights far exceed available DRAM. Prior systems exploit activation sparsity and offload weights to SSD or flash storage, but face a fundamental systems trade-off: accurate sparse execution decisions require the latest context, whereas efficient computation-I/O overlap requires early prediction. As a result, existing designs either serialize execution or incur redundant weight fetches, extra computation, and large cache overheads. We present LeanStream, a streaming speculate-and-refine framework for efficient on-device LLM inference. LeanStream progressively refines computation, loading, and cache-retention priorities using partial GPU results, enabling fine-grained overlap between GPU execution and storage I/O. We implement LeanStream on both mobile and embedded platforms. Compared with prior on-device LLM inference systems, LeanStream reduces memory usage by 4.8$\times$ to 7.5$\times$ at the best throughput achieved by prior work, while further improving token generation throughput by 1.6$\times$ to 2.1$\times$. Source code is available at https://github.com/RenyuanLIU/LeanStream.

0.52

Tools-CC-Bench: a Benchmark Suite for Collective Communication with Compression in HPC and AI Workloads

cs.DC ·2026-09-08 ·Haozhe Fan, Wei Wang, Xingchen Liu, Man Liu, Xingjian Tian +10 more
publishedbenchmark similarity 0.71
Abstract · 12 pages, 10 figures, accepted by conference IISWC 2026

Distributed HPC and LLM workloads increasingly require efficient communication for scalability, yet growing data movement has become a major performance bottleneck. Communication compression can reduce this overhead and complement execution-level optimizations, but its benefits remain difficult to assess because existing benchmarks lack support for diverse backends, realistic datasets, application-specific accuracy metrics, and overlap-induced resource contention. We present CC-Bench, a lightweight, extensible, and application-oriented benchmark suite for evaluating communication compression under realistic execution conditions. CC-Bench uses declarative application-environment modeling to decouple profiling logic from communication libraries, datasets, and fidelity metrics, enabling portable cross-library evaluation. It further combines function-level interception and hardware counter monitoring to characterize per-phase latency, hardware utilization, numerical fidelity, and computation interference. With representative datasets from HPC and LLM workloads, CC-Bench evaluates three compression-enabled communication libraries on CPU and GPU clusters, revealing accuracy-performance trade-offs and bottlenecks to guide practical deployment and optimization.

0.54

MeshRT: Compile-Time Governed Wafer-Scale Runtime for Low-Latency High-Throughput Inference

cs.OS cs.AIcs.DC ·2026-09-20 ·Congjie He, Le Xu, Zhan Lu, Yeqi Huang, Haocheng Xiao +5 more
top venue similarity 0.70
Abstract · Accepted to the 32nd ACM Symposium on Operating Systems Principles (SOSP 2026)

Wafer-scale accelerators promise ultra-low-latency AI inference, but current system stacks still carry an unsustainably high cost premium. The reason is that many current and emerging inference techniques, such as batching and MoE, introduce runtime dynamism that existing wafer-scale systems cannot support efficiently. As a result, they must choose between two unsatisfactory options: accept suboptimal latency, or preserve low latency by restricting dynamic techniques, thereby limiting the models they can support and reducing aggregate throughput. This tradeoff significantly increases the cost of low-latency serving. We present MeshRT, the first wafer-scale system to achieve both ultra-low latency and high throughput for LLM inference. MeshRT achieves this via a novel system architecture, which we call compile-time governance of runtime dynamism. This architecture features new system abstractions and mechanisms that enable MeshRT to compile dynamic events arising from LLM inference directly into per-core schedules, enabling asynchronous and decentralized execution with low runtime overhead. Implemented on a commodity wafer-scale accelerator, MeshRT preserves ultra-low latency while improving throughput by up to 56$\times$ over the state-of-the-art system for wafer-scale accelerators. Against measured single-instance SGLang results on H200, MeshRT achieves 4.5-7.0$\times$ lower latency. Under ideal linear scaling of those GPU measurements to an approximately power-matched H200 cluster, MeshRT achieves 1.7-13.0$\times$ higher decode system throughput in the low-latency regime.

0.37

MCF: A Memory- and Communication-Aware Co-Designed Framework for Long-Context LLM Inference

cs.AR ·2026-10-26 ·Huaizhi Zhang, Jiacheng Zhu, Xuqi Zhu, Junkyu Lee, Klaus McDonald-Maier +1 more
similarity 0.70
Abstract

This paper presents Memory- and Communication-Aware Framework for Long-Context LLM Inference (MCF) that optimizes long-context inference through communication-aware and stage-adaptive KV-cache layout transitions. At the core of MCF is {Memory-Aware Replication and Scheduling} (MARS), a dynamic orchestration mechanism for chunked prefill. MARS exploits early-stage memory headroom by selectively replicating highly reused KV blocks, improving locality and hiding KV propagation latency behind attention computation. As prefill progresses and memory pressure increases, MARS progressively drains redundant replicas and converges the KV cache into a sharded decode-ready layout, avoiding expensive layout conversion at the prefill--decode boundary. For decoding, MCF adopts a query-centric execution model in which KV shards remain stationary while lightweight query tensors are routed across workers. This changes communication from KV-cache-dependent transfer to query-dependent transfer, reducing communication growth with context length. MCF further integrates a hardware-software co-designed execution layer based on an FPGA compute-NIC datapath, enabling metadata-driven KV routing and collective operations directly in the network path. Experiments show that MCF improves TTFT, throughput, and scalability over state-of-the-art distributed inference systems, with larger benefits as context length and cluster size increase.

0.22

CHIPSMORE: Compute-in-Interconnect and -Memory Chiplets for Multi-Mode Multi-Request LLM Inference Acceleration

cs.AR ·2026-08-31 ·Yue Jiet Chong, Yimin Wang, Zhen Wu, Zixuan Wang, Wei Zhang +1 more
similarity 0.70
Abstract

Large language model (LLM) inference exhibits substantial variability across adaptation modes, context lengths, and request concurrency, creating challenges for maintaining high utilization, memory efficiency, and scalable performance on compute-in-memory (CIM) accelerators. This paper presents CHIPSMORE, a multi-mode and multi-request LLM inference accelerator that integrates compute-in-interconnect and CIM to support both base-mode and low-rank adaptation (LoRA) inference under diverse workloads. CHIPSMORE employs heterogeneous processing elements consisting of resistive RAM analog compute-in-memory (RRAM-ACIM) and static RAM digital compute-in-memory (SRAM-DCIM) interconnected through a programmable Inter-PE computational network (IPCN). A composable hierarchical key-value (KV) memory scheme dynamically allocates router scratchpad, SRAM-DCIM, and embedded DRAM (eDRAM) resources according to workload requirements, enabling scalable support for long-context and batched inference. Furthermore, a non-replicated multi-request execution pipeline exploits request-level parallelism without duplicating pretrained weights, while a state-aware resource reconfiguration mechanism selectively retains runtime states and power-gates inactive resources to improve energy efficiency. Evaluation using cycle-accurate hardware-software co-simulation demonstrates that CHIPSMORE effectively sustains high throughput across varying model sizes, context lengths, and batch sizes while maintaining favorable power scaling. Compared with Nvidia H100, CHIPSMORE achieves up to $2.38\times$ higher throughput and $27\times$ higher energy efficiency on Mistral-7B inference while eliminating weight replication for multi-request serving.

0.26

Scheduling Data to Compute: Hierarchical Data Pipelining for LLM Training on AMD GPUs

cs.AR cs.AI ·2026-11-03 ·Gengyu Rao, Ghadeer Ahmed H Alabandi, Su Ann Chong, Thomas Huber, Kailash Gogineni +26 more
code/data similarity 0.70
Abstract

Large language models (LLM) have been the key focus of recent machine learning breakthroughs. As the model size grows exponentially, the computation needed for training is astronomical. A GPU can do a huge amount of arithmetic. However, the data its compute units need is not always available when they are ready. This data may still be in slow memory or on another GPU. While the chip waits, expensive compute sits idle, and at scale even a small drop in utilization translates into substantial cost. In this paper, we treat this waiting time as the primary bottleneck. We focus on hardware features designed for explicit data movement. These features load data from off-chip memory onto the chip, rearrange it into the layout the computation requires as it is loaded, and transfer it between GPUs. By orchestrating them, we keep a steady pipeline of data flowing to the compute units so that they remain busy. We present kernel and framework implementations that address this bottleneck using three key data-movement instructions and hardware features. The Tensor Data Mover (TDM) moves tensor data from high-bandwidth memory (HBM) into on-chip memory. Transpose-load instructions transpose tensor data into the layout that LLM computations require as it is loaded on-chip. Finally, System DMA (SDMA) and Remote DMA (RDMA) move data between GPUs over the scale-up and scale-out networks, respectively. Our results show that TDM and transpose-load provide on average 1.88x and 1.19x speedup at the kernel level, respectively. The SDMA and RDMA lead to on average 1.16x and 1.33x speedup for computation overlapped with communication. This is the first AMD LLM training system to utilize all the GPU data pipelining features. Our implementation has been integrated into open source framework and library for AMD GPUs. https://github.com/AMD-AGI/Primus-Turbo https://github.com/AMD-AGI/Primus

0.34

BOOST: Concurrent Access to Host Memory and HBM to Accelerate LLM Inference

cs.DC cs.ARcs.LG ·2026-09-11 ·Anish Saxena, Jae Hyung Ju, Hritvik Taneja, Po-An Tsai, Aamer Jaleel +2 more
similarity 0.70
Abstract · 15 pages, 22 Figures

GPU memory bandwidth and capacity limit throughput in large language model (LLM) inference. The GPU memory system consists of a primary tier of high-bandwidth memory (HBM) and a secondary tier of host memory connected via CPU-to-GPU interconnect. Current serving systems treat the tiers hierarchically: they serve exclusively from HBM when data fits, and otherwise prefetch data from host memory to HBM before use. In both cases, the host memory bandwidth is never well utilized. Prefetching expands capacity by utilizing host memory, but consumes HBM bandwidth for writes, reducing the bandwidth available for demand loads. We observe that fully utilizing both host and HBM bandwidth requires each wave of GPU threadblocks to access both tiers concurrently and in proportion to their bandwidth ratio. Existing bandwidth-proportional placement strategies fail to provide concurrency because they are not aware of GPU waves, and the large 2MB GPU page size. This paper presents BOOST, the first runtime system that provides concurrent and proportional access to both GPU memory tiers, extracting the combined bandwidth of host memory and HBM for LLM inference without kernel changes. The key insight in BOOST is to use kernel access patterns to make page allocation and runtime data management wave-aware. For static model weights, BOOST applies modulo-based page placement that eliminates access-ratio variance; for dynamically provisioned attention key-value (KV) pairs, it makes the free KV page pool wave-aware. We integrate BOOST into vLLM and evaluate on a Grace Hopper system. At iso-batch size, BOOST improves Time-per-Output-Token (TPOT) by 4.3% over HBM-only serving, whereas prefetching degrades TPOT by 6%. In high-throughput serving, BOOST improves throughput by 31% on average, outperforming prefetching by 15%.

0.24