CS Paper Radar

Autonomous discovery of new structure-plausibility laws for explainable and rapid crystal diagnosis and screening

Zhilong Song, Lixue Cheng

cs.AI cond-mat.mtrl-sci ·submitted 2026-09-01 13:14 UTC · v1

Abstract

Crystal generators and tool-using agents propose structures faster than density functional theory (DFT) energy and phonon calculations or experiments can assess them. Deciding which candidates merit expensive assessment is therefore the bottleneck, yet most screens test little beyond atomic overlap and give no chemical reason for failure. Here, our agents generate, test and actively refute two million candidate laws, leaving eight Plausibility Rules for Inorganic Structures (PRIS). These laws encode five mechanisms: short-range repulsion, ionic contact and packing, electrostatic balance, bond-valence conservation and crystallographic site complexity. Experimental structures satisfy our law sets at 82--99%, but satisfy Pauling's rules 2--5 together at only 6.5%. The strictest set detects 87.9% of damaged crystal structures, whereas distance cutoffs detect only 1.6--3.2%. PRIS plausibility is linearly correlated with synthesizability, so the PRIS-derived synthesis score (PSS) explainably screens 83.7% of hard-to-synthesize structures while retaining 80.7% of experimental structures. In a property-conditioned inverse-design run, PRIS and PSS can reduce the DFT validation queue by up to 67.3% and keep 99.2% of the candidates whose DFT-validated bulk moduli reach the design target. Beyond screening, PRIS explains why GNoME remains enriched in rare low-symmetry structures and reveals how wrong-element assignments in falsified crystal reports hide behind plausible coordinates. PRIS moves screening from a pass-or-fail verdict to a chemical reason for failure, showing that autonomous agents can discover, by active refutation, physicochemical laws that guide calculations and experiments.

Closest papers

Nearest neighbours by meaning across the whole index.

Probing the limits of forward screening and inverse design of crystal materials

cs.LG cond-mat.mtrl-sci ·2026-10-23 ·Zhilong Song, Zijun Pang, Lixue Cheng
hot direction similarity 0.63
Abstract · 23 pages, 5 figures

Crystal materials are designed either by screening known crystals for a target property or by generating new crystals with that property. Both routes are judged against public databases of known crystals, but these databases name the same crystal differently. Several materials announced as new by recent generative and autonomous discovery campaigns have since proved to be known phases or close variants of them. The limits of both routes remain unmeasured. Here we probe them by matching the crystals of 55 databases by structure into one self-extending database of 14.6 million crystals and 131.8 million property values, each traced to its source. Only 4.5% of its crystal-property pairs carry a value. To fill the empty pairs, we developed CGTNet, an equivariant graph transformer with state-of-the-art accuracy on several tasks of two public benchmarks. Trained on each task, it forms a library of property models whose predictions we release. The reach of forward screening has been underestimated. Known crystals hold tens of thousands of ultra-incompressible candidates without a recorded bulk modulus, and a post hoc audit of synthesis evidence finds among them ReN2, whose bulk modulus was measured at 428 GPa. The novelty claimed for inverse design has been overestimated. At an equal verification budget, a stiffness-conditioned generator returned more stiff hits than screening (100 versus 55), but all contained osmium and 82 repeated recorded compositions. Integrating and completing the databases of known crystals therefore moves the limits of both routes: it widens what screening can reach and sets the reference against which generated crystals are judged new.

0.33

Data-driven candidate structure ensemble generation beyond the convex hull with crystALL approach

cs.CE cond-mat.mtrl-sci ·2026-11-02 ·Adam M. Krajewski, Ricardo Amaral, Jonathan W. Siegel, Luke A. Myers, Rushi Gong +2 more
code/data similarity 0.63
Abstract · 19 pages, 7 figures, software repository https://github.com/PhasesResearchLab/crystALL

Real materials consist of multiple stable or metastable states under real-world conditions, existing as statistical ergodic ensembles of configurations rather than ideal crystals. Yet, data-driven computational materials discovery increasingly biases itself toward finding "new stable structures" from ground-state DFT calculations alone. This limits our long-term ability to discover materials whose properties emerge from metastable phases, to explain experimental observations, or to model thermodynamic behavior comprehensively. Predicting ergodic sets of atomic configurations of known and hypothetical solids is a fundamental challenge in theoretical crystallography, approached via many complementary methods. We discuss this conceptually and introduce crystALL, a pragmatic and powerful data-driven approach to discovering ensembles beyond the convex hull, embracing structural diversity over stability alone, enabling robust experiment matching in cases evading traditional methods. crystALL leverages 5 million relaxed structures from OPTIMADE and MPDD to rapidly generate a comprehensive candidate set by: (1) species substitutions; (2) ML feature-space analysis with pySIPFENN; (3) representative structure selection via clustering and energy-minimization or property matching; and (4) construction of the final candidate ensemble for experimental or ab initio validation. We also uniquely address the common challenge of experimental composition uncertainties spanning many integer stoichiometries by new efficient searches across anonymized compositional ranges rather than fixed formulas. Overall, crystALL's ensemble-focused philosophy provides critical advantages over the prevailing convex-hull-searching paradigm, which often fails to account for key experimental observations and increases AI/ML discovery bias over time - akin to model collapse in LLMs retrained on iteratively generated content.

0.23

Quantitative Assessment of Crystal Structure Prediction

cs.LG cond-mat.mtrl-scics.AI ·2026-11-07 ·Sergio Rincón, Gabriel González, Nicolás Andrade, Rafael Velásquez, Sebastián Ojeda +4 more
top venuebenchmarkcode/data similarity 0.62
Abstract · Accepted at NeurIPS 2026, Track on Evaluations and Datasets. 49 pages, 21 figures, 17 tables. Code: https://github.com/BCV-Uniandes/OPAL

Crystal Structure Prediction (CSP) aims to predict a material's 3D structure from its chemical composition, with applications from energy storage to biomedical devices. Despite its importance, existing evaluation frameworks suffer from key limitations: they rely on threshold-sensitive or incomparable metrics, focus predominantly on geometric performance while overlooking physical plausibility, and fail to account for polymorphism, where a chemical composition can crystallize into multiple stable structures. In parallel, recent Symmetry-Informed CSP (SICSP) methods often report results alongside standard CSP baselines while receiving crystallographic templates at inference, which constrain the search space and make SICSP a fundamentally different task. To address these limitations, we introduce an Orientation-invariant, Polymorph-Aware, Large Benchmark (OPAL-Bench) that evaluates CSP and SICSP as separate tasks. We evaluate 7 CSP and 2 SICSP methods under OPAL-Bench across 4 datasets using threshold-free geometric and physical distance metrics. Our results show that no method dominates across all metrics, and that geometric performance is not strongly correlated with physical plausibility. We also release OPAL-CSP, an SE(3)-equivariant flow-matching baseline for the CSP track that performs competitively on geometric metrics and ranks among the best on physical ones. By unifying geometric and physical metrics under a polymorph-aware protocol, OPAL-Bench enables a more comprehensive assessment of generative quality in CSP.

0.45

CrystalJev: calibrated foundation-model probabilities decide what to compute next in materials discovery

cs.AI cond-mat.mtrl-sciphysics.comp-ph ·2026-10-04 ·Peng Kang, Yaxuan Sun, Zhen Li, Yu Liu, Lei Zheng +1 more
similarity 0.62
Abstract · 63 pages, 5 main figures, 9 Extended Data figures, 2 Extended Data tables; Supplementary Information included

Atomistic foundation models screen hypothetical crystals by thresholding predicted energies, an output that states neither how likely a candidate is to be stable nor whether more computation would change the decision. CrystalJev reads one forward pass of a frozen potential on the unrelaxed structure and returns calibrated probabilities, conformal guarantees and a rule for escalating candidates to relaxation or density-functional theory (DFT). Across 65 Matbench Discovery models, threshold calls hide cost assumptions, and ordering slower computation by its value for the decision, rather than by probability, recovers most of its benefit at a tenth of its cost. In a registered prospective test with 2,100 DFT calculations on ionic substitutions, forecasts calibrated on existing data over-stated the stable fraction of new candidates by 0.9--2.2 percentage points, because the population had shifted, not the labelling protocol; a few hundred labels from the new pool removed this bias more reliably than label-free corrections.

0.27

The Roadmap of Inorganic Computational Materials Databases: Capabilities, Credibility, Coverage, and the Open Frontier

cs.CE cond-mat.mtrl-sciphysics.comp-ph ·2026-09-17 ·Miao Liu, Jianghao Jin, Tenglong Lu, Jianguo Si, Yin Shi +2 more
surveyposition similarity 0.61
Abstract

Computational materials databases have become central infrastructure for data-driven discovery of inorganic materials, yet their growth remains strikingly uneven across property families. This perspective synthesizes a systematic survey of mainstream density functional theory (DFT) software, the computational cost and credibility of nineteen material-property families, and the coverage of existing computational databases, into a coherent picture of where the field stands and where it should go. We show that the ecosystem of first-principles codes is methodologically mature: for nearly every property of technological interest, at least one production-grade code can compute it.The binding constraint is no longer methodological capability but the economics of trust - which properties can be computed cheaply enough, and accurately enough, to be harvested at database scale. Mapping database coverage onto a Gartner-style readiness cycle reveals a sharp divide: ground-state structure, energetics, elasticity, and topology have reached routine production, while nine property families - including NMR/EPR parameters, core-level spectra, electron-phonon properties, thermal conductivity, and quantum transport - remain without any systematic computational database. We argue that these blank zones define the scientific opportunity of the next decade, and we propose a three-horizon roadmap: consolidating coverage and interoperability in the near term, industrializing mid-cost properties through surrogate-accelerated workflows in the medium term, and conquering the high-cost frontier through machine-learned interatomic potentials, autonomous computing infrastructure, and community governance in the long term.

0.28

Chemically Meaningful Textualization Enables Explainable Validation of Metal-Organic Frameworks by Large Language Models

cs.AI cond-mat.mtrl-sci ·2026-08-11 ·Guobin Zhao, Xiao-Yan Li
similarity 0.59
Abstract

Computation-ready metal-organic framework (MOF) databases are essential for high-throughput screening, yet many reported crystal structures remain chemically unreasonable or disordered, compromising simulation fidelity. Existing validation approaches can identify non-computation-ready structures, but they often rely on heuristic rules, license requirement, or offer limited interpretability. Here, we show that large language models (LLMs) can serve as interpretable validators of MOF structures when crystallographic information is transformed into chemically meaningful text. By benchmarking nine descriptors, we find that successful LLM-based validation depends not on the amount of structural information alone, but on whether local coordination, framework connectivity, and chemical context are organized into a linguistically learnable representation. Fine-tuned LLMs using specialized descriptors (mof2text) achieve performance comparable to graph-based models in identifying unreasonable MOFs. Importantly, these models extend beyond black-box classification by generating diagnostic rationales for likely error sources, including abnormal bonding, connectivity, and charge states, as well as error-category predictions for annotated datasets. This work establishes chemically informed textualization as the key step that transforms LLMs from generic text models into practical and explainable tools for curating MOF databases.

0.04

PXRD-Bench: How Close Are We to Determining Crystal Structures from Powder Diffraction?

cs.AI cond-mat.mtrl-sci ·2026-10-12 ·Dongyeop Woo, Nofit Segal, Nayoung Kim, Minkyu Kim, Rafael Gomez-Bombarelli +1 more
benchmark similarity 0.58
Abstract

Determining crystal structures from powder X-ray diffraction (PXRD) would enable routine characterization of newly synthesized materials, including those absent from reference databases. Generative models offer a promising approach, but existing evaluations remain fragmented and largely assume single-phase samples with known composition. To fill this gap, we introduce PXRD-Bench, a unified benchmark that extends evaluation to unknown per-element atom counts and recovery of both structures in two-phase mixtures. It provides approximately 4.1 million training structures with simulated PXRD, tests generalization to unseen compositions and structural prototypes, and evaluates recovery from experimental PXRD after excluding structurally matching training entries. To provide a strong reference baseline, we also introduce Bragglite, a PXRD-to-structure model developed through a systematic study of PXRD modeling choices. It achieves a 44.2\% Top-1 match rate on experimental RRUFF patterns with known composition, 24.6\% above the strongest prior baseline. Further analysis yields several key findings: some models fail to benefit from experimental PXRD, while generalization to unseen structural prototypes and recovery from two-phase mixtures remain challenging. Together, our benchmark, systematic studies, and Bragglite clarify the capabilities and limitations of current PXRD-to-structure models.

0.29

Framework-Conditional Open Materials Generation

cs.LG cond-mat.mtrl-sci ·2026-10-29 ·Maya M. Martirossyan, Hillary Pan, Philipp Höllmer, Stefano Martiniani
benchmark similarity 0.58
Abstract

Theoretical predictions of novel materials rely on a variety of techniques, from data-mining-based ion substitution methods to fully de novo generative models. Each approach imposes specific constraints and encounters unique challenges when extrapolating beyond the distribution of known materials to discover new ones. The foremost goal of materials generation is to produce stable, unique, and novel (S.U.N.) structures. Predicted structures that meet these criteria, however, typically result from novel chemical compositions mapped onto known structural prototypes or frameworks. We leverage this heuristic insight to present a new generative paradigm for the de novo prediction of inorganic crystalline materials constrained by their structural framework---i.e., the unit cell shapes and respective particle positions. Our method, termed OMatG-FC (Open Materials Framework-Conditional Generation), learns via a combination of discrete flow matching on the atomic species and stochastic interpolants for the volume scaling of the unit cell lattice, while fixing in-place the fractional coordinates and the unit-volume lattice vectors, dramatically reducing the dimensionality of the problem compared to unconstrained (framework-free) generation. Our method is more flexible than existing prototype-constrained methods, demonstrating capability for discovery of unseen, stable prototypes derived from known structural frameworks. We also investigate the number of unique frameworks in the MP-20 dataset, demonstrating the propensity of duplicate frameworks within the dataset and providing a framework-split version. We benchmark the performance of our model using the LeMat-GenBench suite using three ML interatomic potentials and achieve state-of-the-art S.U.N. rate below the convex hull, eschewing the need to learn atomic packings for materials discovery.

0.09