CS Paper Radar

Random Forest-Informed Cellular Automaton for Large-Scale Wildfire Spread Modelling

Siyu Chen, Esha Saha, Hao Wang

cs.LG stat.AP ·submitted 2026-09-01 08:06 UTC · v1

Abstract

Accurate large-scale wildfire spread modelling requires models that capture both the environmental conditions associated with fire occurrence and the local dynamics of fire propagation. We propose a three-stage framework that combines a Random Forest (RF) model with a cellular automaton (CA). First, an RF model trained on the 2021 Canadian fire season estimates daily pixel-level fire-occurrence probabilities. Second, quantile gradient boosting models provide optional spread-rate priors for sensitivity analysis. Third, an RF-informed CA combines the RF probability layer with neighbourhood-driven spread on a 5 km grid. The RF model achieved AUC values of 0.725--0.795 on the 2022--2024 datasets, while the RF-informed CA achieved substantially higher spatial overlap than the evaluated CA-only baselines in the 2023 simulation. A higher-resolution simulation provides an additional qualitative assessment of local spatial errors. These results suggest that combining RF-derived probabilities with local CA spread can improve large-scale wildfire simulations under the tested conditions.

Comment
31 pages, 9 figures

Closest papers

Nearest neighbours by meaning across the whole index.

WUI-CAST: Real-Time Forecast Updating for Partially Observed Wildland-Urban Interface Fires

cs.CE stat.AP ·2026-10-17 ·Can Wang, Naiyu Wang, Yang Zhou
similarity 0.66
Abstract

Wildland-urban interface (WUI) fires couple landscape spread, structural fire development, and wind-driven ember transport. Forecasting building risk requires models that incorporate emerging observations and update predictions as fires evolve. This study presents WUI-CAST, a framework integrating established fire-propagation representations with sequential Bayesian state estimation to support real-time forecast updating under partial observation. A Dynamic Bayesian Network represents nonlocal ember-driven ignition and local structural propagation, while Bayesian filtering updates building-state probabilities using sparse reports. A retrospective Camp Fire application provides a proof-of-concept evaluation. Open-loop simulations captured key features of the wildfire-to-community transition. In two 30-minute forecasts evaluated against subsequently reported buildings before their assimilation, closed-loop updating increased Recall@10% from 29.03% to 83.87% and from 0.00% to 43.75%, with improved conditional spatial logarithmic scores in both windows. Regional and local diagnostics reveal how assimilation redistributes risk beyond directly observed buildings. Controlled experiments demonstrate gains across the tested observation conditions and filtering implementations. A forecast-update cycle averaged 42 s for a 5-min simulation interval. Together, these findings demonstrate improved spatial risk prioritization from sparse observations and a computationally feasible approach to real-time WUI forecast updating.

0.15

PyroStack: A Multi-Band Spatio-Temporal Sub-Daily Dataset for Wildfires in the United States

cs.LG cs.AIcs.CV ·2026-09-28 ·Arya Kondur, Giosue Migliorini, Cameron Schmitt, Francesco Immorlano, Tairan Wang +12 more
similarity 0.65
Abstract · 23 pages, 6 figures, 5 tables

Wildfires are an increasing hazard to ecosystems, air quality, and human systems, creating a growing need for datasets that support systematic development and evaluation of models for predicting fire spread across diverse landscapes. Effective prediction requires integrating meteorological conditions, fuels, vegetation, and topography at spatial and temporal resolutions suitable for both physical simulation and data-driven approaches. However, existing datasets often lack the resolution and coverage needed to capture these interacting controls. The PyroStack dataset addresses this gap by providing a harmonized, event-based collection of wildfire and environmental data across the contiguous United States and Alaska. It integrates satellite-derived fire observations with atmospheric reanalysis, vegetation, fuel characteristics, and topographic information into a unified framework spanning 6994 wildfires that occurred between 2012 and 2024 across a wide range of ecosystems and climate conditions. PyroStack offers spatial resolutions ranging from 30 m to 9 km and hourly temporal resolution, along with fire progression data at 12-hour intervals to support model initialization and evaluation. By combining broad spatial coverage with fine spatial and temporal detail, the dataset enables systematic analysis of wildfire dynamics and supports both physics-based and machine learning approaches, providing a foundation for benchmarking and improving fire spread models, with future extensions aimed at incorporating additional regions and fire suppression data streams to further advance wildfire prediction.

0.20

Probabilistic Forecasting of Wildfire Size Using Conditional Flow Matching

cs.LG ·2026-10-11 ·Isaac Lee, Bryan Shaddy, Assad Oberai
code/data similarity 0.65
Abstract · 18 pages, 7 figures, 1 table. Code and data: https://github.com/isaaclee2/Wildfire_Size_Flow_Matching

In this work we present a probabilistic model for predicting the temporal evolution of wildfire size using conditional generative algorithms, namely flow matching. Rather than predicting spatially resolved fire progression, the proposed model forecasts a time series of fire acreage, substantially reducing computational cost and enabling efficient integration with downstream applications such as early warning systems and risk assessment tools. Given estimates of the fire size at the current and previous forecasting steps, alongside spatially averaged weather conditions, terrain characteristics, and fuel composition, the model predicts the change in fire area over a 3-hour interval. Training data are drawn from 140 coupled atmosphere-wildfire simulations generated using WRF-SFIRE, paired with weather data from the North American Mesoscale (NAM) model. Sensitivity analysis demonstrates that the model captures physically-consistent responses to variations in wind speed, temperature, and relative humidity. Model performance is evaluated against reference solutions from WRF-SFIRE. For single-step predictions, the model achieves a symmetric mean absolute percentage error (sMAPE) of 0.39 relative to the reference WRF-SFIRE solutions. Recursive multi-step predictions over 24 hours are performed for 12 held-out test cases, where the flow matching model achieves a final fire area sMAPE of 0.39 while further providing meaningful quantification of forecast uncertainty.

0.25

Accelerating Wildfire Hazard Mapping Across Canada with an AI Surrogate Modelling Framework

cs.AI ·2026-10-16 ·Hager Radi Abdelwahed, Toluwaleke Olutayo, Chirag Goel, Jana Osea, Aldo Zaimi +5 more
similarity 0.65
Abstract · Preprint - under review

Canada's increasing wildfire activity requires frequent national hazard mapping to guide proactive mitigation, including fuel management, land-use planning, infrastructure protection, and evacuation routing. However, process-based wildfire simulation frameworks (e.g., BurnP3 and BurnP3+) rely on computationally intensive Monte Carlo simulations to model burn probability, fire intensity, and rate of spread. These workflows can take days to weeks to process a single regional modelling unit. To overcome these computational bottlenecks, we present three contributions developed through collaboration between AI researchers and wildfire modelling experts: (a) a standardized framework for training, fine-tuning, and evaluating AI surrogate models against process-based wildfire simulators; (b) a multi-task deep learning surrogate trained on national-scale data to emulate burn probability, mean fire intensity, and mean rate of spread at a fraction of the computational cost (seconds); and (c) domain-specific metrics and counterfactual evaluation protocols to probe out-of-distribution generalization. Integrating geospatial data (fuel, terrain, ignition likelihood) and regional weather, our model approximates BurnP3+ simulation outputs, achieving strong performance across agreement, rank-correlation, error, and spatial-overlap metrics. It preserves downstream hazard classifications and produces physically plausible responses to expert-informed counterfactual interventions. Furthermore, we demonstrate zero-shot transfer to a separate regional BurnP3+ study and show that lightweight fine-tuning can substantially improve regional calibration and predictive agreement. On a representative region, the surrogate achieves 806-fold end-to-end CPU acceleration and uses 13% of BurnP3+'s host memory, facilitating rapid scenario analysis.

0.08

Annual Earth-observation embeddings encode wildfire disturbance and support simplified burned area mapping

cs.CV ·2026-09-22 ·Jovana Knezevic, Clement Atzberger, Zhengpeng Feng, Adam F. A. Pellegrini, Srinivasan Keshav +1 more
benchmark similarity 0.64
Abstract

Medium-resolution (10-30 m) burned area mapping is vital for monitoring wildfires and their impacts, but remains difficult to scale. Existing methods require either curated fire-specific imagery or dense time-series analysis. Here, we tested whether annual Earth-observation embeddings retain wildfire disturbance signals sufficiently to map burned areas without either requirement. Using Tessera and AlphaEarth embeddings, we tested individual burn-scar delineation, mapping of all same-year fires within an area, regional wall-to-wall mapping, cross-continental transfer, and intra-annual fire timing. Tessera strongly encoded wildfire disturbance, allowing even linear models to separate burned from unburned pixels; the signal was weaker in AlphaEarth. Models trained on a single Tessera embedding matched or exceeded equivalent models using paired pre- and post-fire HLS imagery, and outperformed post-fire imagery alone. The same approach mapped all same-year fires within benchmark scenes (F1 = 0.90). Applied across California, with no California fire data used for downstream training, it recovered 97% of reference burned area and detected substantially more small and medium-sized fires than GABAM or MCD64A1. Separately, a model trained on 2018-2021 US fires transferred without retraining to 88 European fires from 2024-2025 (F1 = 0.88). For well-detected fires, ignition timing was recovered with a mean absolute error of 13 days. Performance declined for fires ignited near the end of the calendar year, and wall-to-wall deployment produced systematic false positives in some unseen landscapes. Annual embeddings nevertheless achieve high segmentation accuracy while moving the burden of dense time series processing upstream, providing a promising path towards simpler regional burned area mapping.

0.14

Construction and Evaluation of Machine Learning Models for Near-Real-Time Fire Detection from MTG FCI Imagery

cs.CV ·2026-10-04 ·Asaf Vanunu, Boaz Nadler, Arnon Karnieli
code/data similarity 0.64
Abstract

Geostationary satellite observations are important for wildfire detection and monitoring. The current study evaluates machine learning models for MTG FCI near-real-time fire detection in 1- and 2-km spatial configurations and compares them with threshold-based algorithms. The models were trained and evaluated using VIIRS fire reference data across diverse ecological regions in Europe, Africa, and the Middle East. The key results are that 1-km models significantly outperform both their 2-km variants and operational threshold products. The constructed 1-km models achieved F1 scores higher by up to 0.36 compared to baseline products. Importantly, the 1-km models detected small fires with higher probability compared to competing models. Finally, the models robustly detected fires up to 260 min earlier than baseline products. To support opensource applications, our trained models are publicly available.

0.22

WildFireGS: Physics-Based Wildfire Simulation in Large-Scale Semantics-Enriched Gaussian Splatting Forest Scenes

cs.GR ·2026-08-11 ·Nienke Driessen, Joris Rijsdijk, Sören Pirk, Wojtek Palubicki, Dominik L. Michels +1 more
similarity 0.63
Abstract

Climate-driven environmental change is driving an increase in both the frequency and severity of wildfire events, making accurate simulation and prediction critical for effective risk mitigation and landscape management. While recent physics-based wildfire models achieve high realism by explicitly simulating combustion, heat transfer, and fuel dynamics, they remain largely restricted to synthetic environments with complete and idealized knowledge of forest structure, limiting their applicability to real-world environments captured via aerial imagery. To provide a pathway toward real-world wildfire digital twins derived directly from observational data, we present WildFireGS, a physics-based wildfire simulation framework operating directly on large-scale, semantics-enriched 3D Gaussian Splatting forest reconstructions. Our approach bridges learning-based scene reconstruction and environmental simulation by augmenting Gaussian primitives with semantics and material properties that encode vegetation type and fuel characteristics. We introduce a particle-based combustion model that operates natively on Gaussian representations, simulating ignition, heat transfer, combustion, and flame propagation across complex forest structures. This enables direct physics-based simulation of fire behavior on reconstructed real-world environments, without requiring conversion to explicit meshes or volumetric grids. We demonstrate the modularity of WildFireGS through a rain-driven cooling mechanism in terms of an energy-sink process to realistically model fire containment. Evaluations on synthetic scenes and real aerial forest captures show physically consistent wildfire behavior, reproducing characteristic dynamics including propagation scaling with vegetation density, wind velocity, and terrain slope. In addition, we validate our model through novel firebreak experiments and biomass loss estimation.

0.04

DailyWildfireCAN: A Dataset and Benchmark for Next-Day Wildfire Spread Prediction in Canada

cs.CV ·2026-11-10 ·Mahacine Ettahri, Hager Radi Abdelwahed, Toluwaleke Olutayo, Daniel Aloise, Gaétan Marceau Caron
benchmark similarity 0.63
Abstract

Wildfires represent a critical ecological and socio-economic challenge in Canada, where vast boreal forests and a warming climate have amplified the frequency and severity of extreme fire seasons. Predicting next-day wildfire spread can support fire management, but requires capturing complex interactions among weather, fuels, and terrain. Deep learning has emerged as a promising approach to learning these relationships from heterogeneous environmental data, yet its development and evaluation depend on representative datasets. Existing deep learning research on wildfire spread relies predominantly on US-focused datasets, leaving Canadian fire environments underrepresented. To address this gap, we present DailyWildfireCAN, a multi-modal, multi-temporal dataset and benchmark for predicting next-day wildfire spread across Canada. The dataset tracks continuous fire progression over multi-day events at a high spatial and temporal resolution of 90-m and 24-hour, respectively. This resolution preserves fine-scale information relevant to fire-edge geometry, local fuel variations, and terrain effects, supporting research toward improved daily wildfire spread forecasting. DailyWildfireCAN covers 2,440 wildfire events across eight fire seasons 2017-2024 and integrates 33 features across diverse modalities, including topography, meteorology, land cover, vegetation and forest structure, human influence indices, and satellite imagery. We establish a comprehensive benchmark comparing mono-temporal and multi-temporal prediction models, accompanied by a multi-dimensional evaluation framework assessing robustness across wildfire characteristics, geographic regions, and temporal conditions, spatial prediction quality, and sensitivity to reference label variations.

0.15