CS Paper Radar

Post-Training Ternarization of Qwen3-4B Capability, Effective Bit Budget, Storage Compression, and Deployment

Anirudh Malik, M Sparsh Mehra, Poojith Devan

cs.AI cs.LG ·submitted 2026-09-02 00:42 UTC · v1

Abstract

Ultra-low-bit language models can reduce storage and memory bandwidth, but a nominal "1.58-bit" label does not fully describe the stored representation, retained capability, or runtime behavior. We study an end-to-end post-training conversion of Qwen, an instruction-tuned 4B-parameter model, using KOTMS rotation, E2M-ATQ ternarization, and GPTQ-style error compensation from TWLA. The experiment is weight-only: activations remain at 16-bit precision, so ILA-AMP is omitted. We evaluate effective bit accounting, task capability retention, perplexity, calibration sensitivity, checkpoint composition, and deployment behavior. The final conversion uses 1.641 effective bits per weight for quantized linear weights, with 81.62% of model parameters targeted. Across ten scored capability comparisons, accuracy falls from 64.5% to 54.7%. Degradation is uneven: BoolQ retains 84.6% chance-corrected teacher performance, while ARC-Challenge retains 43.8%. Perplexity rises from 13.639 to 18.748 on WikiText-2, 24.700 to 31.992 on PTB, and 19.831 to 28.966 on C4. A subsequent packing run preserves the ternary planes and scales, reducing reported model size from 8.29 GiB to 3.96 GiB with essentially unchanged perplexity. A separate third-party packing attempt was lossy and is excluded from the primary artifact claim. The packed artifact has not been benchmarked end-to-end for task accuracy or generation throughput. A preliminary Triton GEMV microbenchmark is 4.6x slower than FP16 cuBLAS on one tested shape. We therefore do not claim that compression alone yields faster inference.

Comment
Weight-only post-training ternarization of a 4B-parameter instruction-tuned language model. Activation quantization and end-to-end generation throughput are outside the scope of the primary evaluation

Closest papers

Nearest neighbours by meaning across the whole index.

Scaling Post-Training Ternarisation to Qwen3-8B Capability Retention, Reproduction, Lossless Packing, and Packed Execution

cs.LG cs.AI ·2026-09-08 ·Anirudh Malik, M Sparsh Mehra, Poojith Devan
similarity 0.84
Abstract

Ultra-low-bit language models promise reductions in storage and memory traffic, but a nominal "1.58-bit" label does not specify the deployed representation or its execution cost. We study a scale-up of an aggressive post-training conversion pipeline from Qwen3-4B to Qwen3-8B. The conversion uses KOTMS rotation, E2M-ATQ adaptive ternarisation, and GPTQ-style error compensation in a weight-only A16 configuration. We do not claim these algorithms as new. Our contribution is the end-to-end scale-up characterisation: an external reproduction gate, matched 4B/8B capability analysis, cross-corpus perplexity, effective-bit accounting, lossless lattice-aware packing, and direct packed execution. The 8B model reaches a three-corpus perplexity ratio of 1.361x, with WikiText-2, C4, and PTB ratios of 1.318x, 1.393x, and 1.371x. On eight zero-shot tasks at n = 500, mean accuracy is 64.6% versus 72.4% for FP16, corresponding to 78.5% chance-corrected retention and a 7.8-point absolute cost. The matched 4B run retains 69.6%, yielding an 8.9-point 8B advantage. The packed checkpoint is 8.24 GiB and preserves the recorded perplexity to measurement precision. Direct packed execution reaches 15.52 tokens/s in 7.35 GiB, while a preliminary packed GEMV remains slower than FP16 cuBLAS. The result is a validated scale-up baseline: model size improves robustness to aggressive post-training discretisation, actual serialisation is solved for the measured artefact, and direct execution is feasible, while broader seeds, calibration distributions, and kernel optimisation remain open.

0.04

Capability-Stratified Degradation in Ternary Language Models

cs.AI ·2026-08-28 ·Anirudh Malik, M Sparsh Mehra, Poojith Devan
similarity 0.76
Abstract

Extreme low-bit inference offers a route toward smaller models and constrained deployment. Ternary language models restrict weights to $\{-1,0,+1\}$, approaching the limit of $\log_2 3 \approx 1.585$ bits/weight. The practical question for a pretrained model is not simply whether weights can be quantised but which capabilities survive and whether it remains useful for adaptation. We explore this by converting Qwen3.5-0.8B (752M parameters) to ternary weights using 72.4M tokens of quantisation-aware training (QAT). The resulting model, Cloe, is evaluated across 29 benchmarks, representation diagnostics, and downstream fine-tuning. The evidence shows non-uniform degradation. A linear probe recovers 43.76% of MMLU answers from the full-precision teacher's representations but only 26.19% from Cloe (near chance), indicating specialist factual information is lost. However, Cloe retains measurable performance on ten tasks, averaging 77.1% of teacher performance. Crucially, fine-tuning raises Cloe to 89.8% on SST-2 (95.6% of the matched teacher) and reaches 79.4% teacher retention on XSum. We attribute degradation to a combination of quantisation-induced information loss and incomplete recovery due to the limited QAT budget. We also highlight an evaluation pitfall: standard answer-letter scoring failed (Cloe emitted "A" on 98.6% of MMLU questions), necessitating continuation scoring. Ultimately, ternary conversion is unsuitable as a drop-in general replacement yet remains valuable as a compact substrate for task-specific models.

0.40

QTEA: Ternary LLMs with Sparse Residual Salient Weight and By-Column Optimization

cs.LG cs.AI ·2026-08-31 ·Yipin Guo, Arun M George, Jie Fu, Tareq Mahmoud, Sixue Xing +1 more
top venuecode/data similarity 0.69
Abstract · Accepted by EMNLP 2026 Main Conference

Weight-only post-training quantization (PTQ) can alleviate the computational burden of serving large language models (LLMs) at scale. However, existing PTQ methods often fail to generalize across models and suffer severe accuracy loss below 2 bits. Many leverage unstructured sparsity to mitigate this loss, but at the cost of regularity and GPU-friendly execution. We present QTEA, a sub-2-bit PTQ framework that quantizes weights into ternary values and uses salient weights as residual error compensators. To maintain hardware efficiency, residuals are assigned to selected columns with semi-structured $1:4$ sparsity within the salient columns. We further add column-wise rescale refinement to GPTQ-style column-by-column quantization, alternately updating per-column scales and ternary assignments to reduce reconstruction error. We also identify order-dependent error propagation in GPTQ and introduce error decay to attenuate late-stage error accumulation. On Qwen3-14B, QTEA compresses all weights to an effective 1.7 bits per weight while improving average accuracy over the strongest ternary PTQ baseline by 16.7%. It also achieves 1.40$\times$ and 2.61$\times$ lower perplexity on WikiText and C4 respectively. This trend holds on Llama3-8B, where QTEA obtains a 6.6% accuracy gain and 1.34$\times$ / 1.95$\times$ lower perplexity on the same datasets. Finally, we develop a lookup-table based kernel that achieves 7.2$\times$ faster per-token generation over an FP16 baseline. Code is available at https://github.com/Intelligent-Microsystems-Lab/QTEA.

0.72

E8-QAT: Efficient 2-Bit Quantization-Aware Training with Implicit Lattice Codebooks

cs.AI ·2026-10-20 ·Xinyu Lei, Hong Huang, Jiebin Zhang, Hongyu Li, Jinlong Song +4 more
similarity 0.69
Abstract · 17 pages, 6 figures

Low-bit quantization reduces the memory footprint of large language models, but preserving accuracy with efficient training remains challenging. Scalar quantization encodes weights independently, while explicit-codebook vector quantization introduces costly search during training. We propose E8-QAT, a 2-bit quantization-aware training framework that uses the $E_8$ lattice as an implicit eight-dimensional codebook. It jointly quantizes weight groups through arithmetic projection without storing or searching an explicit codebook during the training forward pass. A 2-bit core encoding and sparse extension preserve the selected lattice points exactly, adding less than 0.1\% to core index storage. On Qwen3.6-35B-A3B, E8-QAT matches the performance of the full-precision model in terms of the average score across the four tasks. E8-QAT improves over the state-of-the-art baseline by 2.03\% on IFEval and by 1.51\% on LiveCodeBench, under the same data, schedule, and bit width. The 2-bit representation reduces peak memory by 80\% and supports a $4\times$ larger batch. At each representation's largest feasible batch, E8-QAT reaches $1.97\times$ the decoding throughput of BF16.

0.32

When Calibration Data Matter in Sub-4-Bit Language Model Quantization

cs.LG cs.CL ·2026-11-08 ·Yehong Jiang, Yen-Kuang Chen, Xinmin Tian
top venue similarity 0.69
Abstract · Accepted to NeurIPS 2026. 10 pages main text, 47 pages total including references, checklist, and appendices

Low-bit post-training quantization reduces language-model memory but can sharply degrade downstream task accuracy. Calibration usually relies on generic text, but when task-informed data recover accuracy and which quantizers benefit remain poorly understood. We introduce FragCal-DC, which supplements generic text with training documents from task families with low retention of full-precision accuracy in a two-bit scan. We use a two- to four-bit sweep to locate functional regimes and four-seed calibration comparisons to evaluate six data-dependent methods across six dense models (1.7B-8B) and ten tasks. At their lowest tested functional bit widths, iterative SignRound V2 and OmniQuant improve at two bits, whereas single-pass GPTQ and AWQ show small mean responses at three bits. At two bits, SignRound V2 gains 1.83 percentage points in mean ten-task accuracy over generic-text calibration across six models. At 70 billion parameters, GPTQ and SignRound V2 both improve at two bits, with functional generic-calibration baselines. For two-bit SignRound V2, task-level controls show that recovery concentrates on families included in calibration, while incorrect answer designations retain about 90% of the mean accuracy gain. Changes in reconstruction error do not consistently track accuracy gains. These findings support task-informed calibration as a design principle for preserving downstream accuracy in low-bit quantization.

0.36

Compress and Forget: bitsandbytes Quantization Amplifies Proactive Interference in LLMs

cs.CL cs.LG ·2026-08-19 ·Shayan Shahrabi-Farahani, Dara Rahmati
benchmarkcode/data similarity 0.68
Abstract · 21 pages, 6 figures, 11 tables. Author list formatting simplified. Code and data released at https://github.com/ShayanShahrabi/compress-and-…

Proactive interference (PI) is a documented failure mode in large language models in which retrieval of a repeatedly overwritten value degrades as prior overwrites accumulate, mirroring a classical phenomenon in human working memory. Post-training quantization (PTQ) is now the default deployment path for open-weight models, yet its effect on this failure mode has not been tested. We evaluate three precision levels (FP16, INT8, INT4/NF4, via bitsandbytes) across three architecturally distinct instruction-tuned models (Qwen2.5-7B-Instruct, Mistral-7B-Instruct-v0.3, Phi-3.5-mini-instruct), holding the retrieval task fixed. INT4 quantization significantly reduces accuracy under high interference in every model (e.g., from 81.0% to 68.3% for Qwen), confirmed by paired McNemar's tests ($p \le 2.6 \times 10^{-6}$) and a mixed-effects regression spanning all interference levels; INT8, often assumed safe, also carries a smaller but real penalty in two of three models. The effect is specific to semantically similar (word-type) distractors and reverses sign under a numeric control condition, and is mechanistically linked to a rise in same-key intrusion errors under INT4 (from 21.5% to 24.6% of trials, $p = 4.8 \times 10^{-7}$). A follow-up ablation shows the effect originates in the quantized transformer backbone rather than the output projection layer. These results suggest that bitsandbytes 4-bit quantization can impose an additional cost on applications relying on long, updatable, semantically dense contexts, even when aggregate benchmark accuracy appears largely unaffected. We release our code and tokenizer-verified vocabulary construction method at https://github.com/ShayanShahrabi/compress-and-forget

0.58

Quantization-Aware Healing: A Practical Recipe for Recovering Compressed, 4-Bit LLMs

cs.CL cs.AIcs.LGcs.PF ·2026-08-21 ·Bakbergen Ryskulov, Iker García-Ferrero, David Montero, David Jansen, Ali Hashemi +3 more
similarity 0.67
Abstract · Patent Application Number: 26382838.6 / P202602102EP

Serving large language models cheaply increasingly means shipping models that are both structurally compressed to a fraction of their parameters and quantized to 4 bits. Together these steps degrade reasoning, mathematics, coding, and long-context behavior enough to require a recovery, or healing, stage before deployment. The default recipe, quantization-aware training (QAT), re-fits the compressed, quantized model to hard labels; in our pipeline it converged slowly and collapsed past its peak. We adopted Quantization-Aware Healing (QAH) instead. Because a structurally compressed model is never independently trained at full precision, its bfloat16 checkpoint is a distillation-recovered approximation of the original; QAH distills the 4-bit student directly from the original, uncompressed model. On a GPT-OSS 120B to 60B to MXFP4 pipeline, the QAH student matches or beats its bfloat16 source on 7 of 9 benchmarks at roughly 4 times less weight memory and half the teacher's parameter count, and is released open-weight as Hypernova-60B. Against a matched QAT baseline it reaches a comparable peak about 7 times faster and stays stable under continued training, without hand-tuned early stopping. We also report deployment lessons, including a large, reproducible quality gap between distributed-training backends. Our aim is a recipe deployable without a multi-week hyper-parameter search.

0.14

RoleQ: Role-Aligned Scales for Converting Language Models to Ternary

cs.AI cs.CL ·2026-10-15 ·Johannes Knittel, Alec Helbling, Hanspeter Pfister
similarity 0.67
Abstract

Weight quantization below four bits shrinks memory and bandwidth at a perplexity that looks acceptable, but often at the cost of factual knowledge and task accuracy. Ternary weights have mostly been obtained by training from scratch or long fine-tuning. We introduce RoleQ, a quantization framework that places scales by the functional roles of Transformer units rather than by the layout of the weight matrix, as conventional formats do. Vectors that read from the residual stream take one scale per output unit; those that write to it, one per input unit. The rule is structural, needs no search, calibration or stored state, and holds on integer and ternary grids. In a rotated basis it matches a per-layer axis search at half the solver work, and at ternary it cuts perplexity by up to half against layout-based placement in two families at every size from 0.6B to 14B, where per-row scales leave MMLU at chance. Our lightweight post-training pipeline converts an existing checkpoint to 1.59 bits per weight in a few GPU-hours, a fraction of the cost of learned ternarization, and leads every post-training ternary method at matched or lower memory-resident bits on perplexity, zero-shot accuracy and MMLU, most widely on knowledge. A sparse second ternary plane placed by a per-unit Fisher saliency keeps the matmul multiplication-free and recovers what ternary loses first: at 8B, a fraction of a bit returns about half the MMLU that conversion costs, well ahead of random or Hessian-based placement at equal bits.

0.06