CS Paper Radar

Calibration of neural viscoelastic models via full-field data

Brain M. Riemer, Markus Kästner, Karl A. Kalina

cs.CE ·submitted 2026-09-03 10:46 UTC · v1

Abstract

We propose an unsupervised learning framework for calibrating a physics-augmented neural network (PANN) for small-strain viscoelasticity via full-field data. It only requires quantities that are directly accessible in real experiments for training, namely global reaction forces and surface displacements. The underlying PANN is embedded in the generalized standard materials theory, in which two scalar-valued potentials render the constitutive model thermodynamically consistent by construction, while invariant-based representations of the free energy and the dual dissipation potential additionally ensure material symmetry. Considering a thin specimen under the plane stress assumption, we formulate a constrained optimization problem based on the equilibrium gap method in combination with quasi-Newton optimizers and automatic differentiation. Thereby, the unknown out-of-plane strain follows from the plane stress condition and the evolution of the internal variables is captured by an implicit time integration scheme. The resulting system of nonlinear equations is solved via a local Newton iteration at quadrature point and time step. To drastically reduce the computational cost of training, the backward adjoint method is employed to compute the gradient of the target loss, instead of backpropagating through all Newton iteration steps. The proposed framework is demonstrated for synthetic data, including noisy displacements and forces, showing excellent agreement across a wide range of deformation rates and load paths.

Closest papers

Nearest neighbours by meaning across the whole index.

A Differentiable Framework for Inverse Identification of Heterogeneous Cohesive Laws

cs.CE physics.comp-ph ·2026-10-24 ·Sida Hao, Jinkyo Han, Bahador Bahmani
similarity 0.70
Abstract

This work develops a differentiable finite element framework based on an intrinsic cohesive-zone formulation for identifying traction-separation laws from global force-displacement histories and spatially sparse strain measurements. The framework employs physics-constrained neural networks to represent flexible, thermodynamically structured cohesive laws, with sensitivities computed through automatic differentiation and a discrete adjoint that accounts for the history-dependent evolution of interfacial damage. To enable identification of spatially heterogeneous cohesive behavior, we extend learned constitutive priors to irreversible interfacial damage by constructing a shared, low-dimensional family of cohesive laws from representative traction-separation histories. This representation exploits common constitutive structure and parameter sharing to reduce the number of unknowns and regularize the inverse problem, while allowing local cohesive behavior to vary spatially through latent coordinates. Numerical investigations involving double-cantilever beams and fiber-matrix composites demonstrate that accurate reproduction of global force-displacement responses does not necessarily imply accurate recovery of the underlying cohesive laws. Incorporating spatially resolved strain measurements substantially improves constitutive identification, even when the admissible responses are constrained by a learned prior. Comparisons with conventional bilinear cohesive models and Bayesian optimization further illustrate the benefits of the learned constitutive representation and adjoint-based identification for high-dimensional inverse problems.

0.20

Thermodynamically consistent neural constitutive models for elastoplasticity via eigen-representations

cs.CE ·2026-11-09 ·Harikrishnan Vijayakumaran, Shunyu Yin, Martin Abendroth, Miguel A. Bessa, Karl A. Kalina
theory similarity 0.67
Abstract

Neural network material models can represent yield surfaces and hardening laws with far more flexibility than classical closed-form plasticity formulations, but training such a model end-to-end through an implicit return map introduces non-trivial challenges. This work presents a thermodynamically consistent neural constitutive model for rate-independent, isotropic elastoplasticity that jointly learns a flexible yield function together with its evolution laws. For non-associative flow, the yield function extends the convex flow potential by a jointly trained additive term, which renders the model thermodynamically consistent by construction. Isotropy and convexity are enforced simultaneously across all learnable components through a permutation-invariant, spectral (eigenvalue-based) representation. Training proceeds through a backward-Euler return map, with gradients propagated by the implicit function theorem together with an eigenvalue-degeneracy-aware scheme for safe differentiation. The robustness and generality of the approach are demonstrated by reproducing known constitutive models, including non-associative flow, learning material behavior from stress--strain data extracted from a full-field finite element simulation, and capturing unknown non-associative behavior from homogenized representative volume elements of a foam. Finally, the proposed neural plasticity model is evaluated within finite element simulations to solve boundary-value-problem under plane stress.

0.27

Constrained neural softening functions for the Mullins effect in parameter-dependent materials

cs.CE ·2026-10-25 ·Dominik K. Klein, Jonas Fey, Maximilian Kannapinn, Oliver Weeger
similarity 0.67
Abstract

Accurately capturing the Mullins effect across varying material compositions remains challenging, as constitutive models must unify flexible representations of stress softening with physical consistency and robust parameter calibration. In this work, we investigate parameter-dependent physics-augmented neural network constitutive models within the pseudo-elastic modeling framework, focusing on structural constraints that ensure physically admissible neural softening functions. This paper has three key contributions: (1) We formulate different neural softening functions within the pseudo-elastic framework, including a multiplicative decomposition of the softening function that enables parameter-dependent ansatz functions satisfying common mechanical constitutive conditions by construction. (2) We derive a sufficient condition for ellipticity of pseudo-elastic constitutive models, which can be enforced in the constitutive models by construction. (3) We systematically investigate how flexibility and structural constraints influence the performance of neural softening functions in terms of prediction accuracy and calibration robustness. For this, we consider multiaxial experimental data of carbon black-filled EPDM rubber synthesized with varying amounts of curatives. The findings of our work suggest that neural softening functions are a promising extension of the classical pseudo-elastic framework and, when subject to suitable constraints, can improve predictive accuracy for highly nonlinear, parameter-dependent materials.

0.28

Newton-PINet: A fast physics-informed neural network with Newton linearization for meta-learning nonlinear PDEs

cs.LG cs.AIcs.CEphysics.comp-ph ·2026-11-16 ·Yuchen Fan, Chang Wei, Pao-Hsiung Chiu, Chin Chun Ooi, Heyang Wang +1 more
top venuebenchmarkcode/data similarity 0.66
Abstract · Accepted at NeurIPS 2026

Scientific machine learning has opened new avenues for solving parameterized partial differential equations (PDEs), enabling models to learn a family of PDEs and generalize to unseen instances. In this context, data-driven operator learning methods typically require large training datasets, while physics-informed neural networks (PINNs) suffer from difficult optimization and limited generalization, especially for nonlinear PDEs. We propose Newton-PINet, a physics-informed network enhanced by Newton linearization, offering an effective meta-learning framework for nonlinear PDEs. Newton-PINet (i) employs a physics-informed multilayer network with skip connections, where the output-layer weights are solved by least squares; (ii) adopts a two-stage learning strategy that first leverages gradient-based training to learn robust representations from the available training tasks, and then performs gradient-free fine-tuning on the output layer for fast task-specific generalization; and (iii) incorporates a Newton linearization method to speed up the least-squares iteration for nonlinear PDE problems. On a challenging nonlinear reaction-diffusion benchmark, Newton-PINet achieves up to three orders of magnitude lower relative error than recent neural solvers, while using 16x fewer training tasks and over an order of magnitude less training time (about 5 minutes versus several hours). This work advances the meta-learning of PINNs toward data-efficient, fast, and generalizable physics solvers. The code and datasets are publicly available at: https://github.com/fycAIwj/Newton-PINet.

0.48

A mesh-based neural energy method for the simulation of heterogeneous composites

cs.CE cs.LG ·2026-10-07 ·Pius J. M. Wichmann, Stefan Hildebrand, Sandra Klinge
benchmark similarity 0.66
Abstract

Modeling heterogeneous materials remains a challenge for physics-informed neural networks such as the deep energy method (DEM). The DEM and its variants, here collectively referred to as the neural energy method (NEM), offer a differentiable variational framework. However, their conventional collocation-based implementation (C-NEM) often suffers from physically inadmissible displacement oscillations, integration errors, and high computational costs from automatic differentiation. This work introduces the mesh-based neural energy method (M-NEM), extending the NEM through a mesh-based discretization of the displacement field. By interpolating nodal displacements via shape functions, the M-NEM imposes a kinematic constraint that suppresses oscillations. Furthermore, the method replaces automatic differentiation with algebraic shape function derivatives for strain computation and employs high-order Gaussian quadrature for accurate energy integration. On a directly comparable benchmark problem, the M-NEM reduces stress errors by up to three orders of magnitude relative to the C-NEM while being one to two orders of magnitude faster. On two further benchmarks involving extreme stiffness contrasts, only the M-NEM converges. A comparative study of neural architectures reveals that radial basis function neural networks (RBFNNs) yield optimal performance within the M-NEM, resolving sharp gradients at material interfaces with higher accuracy than multi-layer perceptrons (MLPs) with random Fourier feature (RFF) mapping and faster convergence than Kolmogorov-Arnold networks (KANs).

0.22

Data-Free Weak-Form Staggered Neural Operators for Magneto-Mechanical Coupling in Finite-Strain Elastomers

cs.CE ·2026-10-02 ·Alireza Yazdandousthamedani, Ahmad Moeineddin, Reza Najian Asl, Shahed Rezaei, Michael Kaliske
similarity 0.65
Abstract

Magneto-active elastomers, as a class of smart materials, exhibit strongly coupled magnetic and mechanical behavior at finite strains. Considering variations in microstructure, material properties, and geometry can lead to computationally expensive analyses. Building on the finite operator learning (FOL) framework, this study develops a data-free, physics-informed operator-learning framework for families of coupled finite-strain magneto-mechanical boundary-value problems. The governing magnetostatic and mechanical equations are enforced through finite-element weak-form residuals, allowing the neural operators to be trained without labeled finite-element solution data. The main contribution of this study is the development of a weak-form staggered neural operator (WSNO) framework for strongly coupled magneto-mechanical saddle-point problems. Separate magnetic and mechanical neural operators are trained alternately using a staggered optimization strategy, while their physical coupling is retained through the constitutive relations and residual evaluations. The resulting framework learns mappings from parameterized material and geometric descriptions to the corresponding coupled magnetic and mechanical solution fields. The proposed framework is investigated across several settings, including heterogeneous random-inclusion microstructures, varying magnetic phase contrast, area-fraction-dependent geometries, strongly out-of-distribution material morphologies, and three-dimensional geometry-parametric problems. In addition, the learned operator is combined with a neural-initialized Newton strategy, in which the nonlinear finite-element solver is initialized using the neural prediction. The results demonstrate that the proposed operator-learning framework can accurately capture coupled magneto-mechanical responses across a broad range of parametric problem settings.

0.15

Variational Functional Neural Networks (vfNN)

cs.LG cond-mat.soft ·2026-11-02 ·Chinmay Katke, C. Nadir Kaplan
benchmark similarity 0.65
Abstract · 11 pages, 4 figures. Version submitted for peer review

We present a variational functional neural network (vfNN) algorithm that optimizes physically motivated continuum functionals in integral form (e.g., Lagrangian, Hamiltonian, or free energy) to find the states of a system. That way, vfNN bypasses solving the equations of motion (a.k.a. the Euler-Lagrange equations), which are in the form of differential equations. To this end, our approach is fundamentally different from conventional physics-informed neural networks (PINN) that solve differential equations by minimizing a phenomenological loss function involving higher order derivatives and ad hoc weight factors. In contrast, vfNN merely evaluates lower order derivatives of the generating functional and replaces the weight factors with rigorous physical scales. This also fundamentally changes the loss landscape, and the desired solutions may become unstable. For this emergent nonconvex optimization problem, we develop a quasi-Newton optimization algorithm with simulated annealing that converges to the solutions of the corresponding Euler-Lagrange equations of the functional regardless of their stability properties. Our simulations using vfNN give accurate results for benchmark systems governed by linear or nonlinear ordinary differential equations.

0.28

Hard Constraint Projection in a Physics Informed Neural Network (Burgers)

cs.LG physics.flu-dyn ·2026-10-30 ·Miranda J S Horne, Peter K Jimack, Amirul Khan, He Wang
publishedhighly cited similarity 0.65
Abstract · 6 pages, 3 figures, In proceedings of 1st international Symposium on AI and Fluid Mechanics 2025 (Paper No. S11P2)

Physics informed machine learning provides a framework to study and simulate fluid dynamics, potentially at a fraction of the computational cost of traditional numerical methods, with the goal of improving the explainability, accuracy and robustness of purely data driven machine learning methods. In this work, we extend the hard constraint projection (HCP) method developed by Chen et al. [Journal of Computational Physics, 445, 110624, 2021] from a linear partial differential equation (PDE) to a nonlinear PDE: the 1D Burgers' equation. To strictly impose a discrete approximation of the governing equation, the Burgers' equation is first locally discretised (using a finite difference stencil) then decomposed into a constraint matrix and a prediction matrix. Using tools from linear algebra, the constraint matrix is used to construct a projection matrix. A physics informed neural network (PINN) [Raissi et al. Journal of Computational Physics, 378, 686, 2019] is used to predict the velocity, and a final unlearnable layer projects the velocity prediction to the hyperplane of exact solutions to a discretised form of the Burgers' equation. Our initial results indicate that the HCP-PINN initially trains similarly to an equivalent PINN, and as the PINN loss plateaus, the HCP-PINN loss continues to decline. When tested on a previously unseen uniform grid of points covering the domain, the HCP-PINN exhibits higher accuracy, converging to a data error approximately an order of magnitude lower than the comparable PINN. We also observe that the inclusion of the HCP layer results in better observance of the governing PDE. Our findings suggest that the HCP-PINN can be more robust to the selection of physics collocation points, and less dependent on collocation point quantity.

0.39