CS Paper Radar

On-board ML for Trace Gas detection in Imaging Spectroscopy data

Vít Růžička, Adam Chlus, Andrew Thorpe, David R. Thompson

cs.LG cs.PF ·submitted 2026-09-03 20:40 UTC · v1
unusual

Abstract

Data collected during aerial and spaceborne imaging spectroscopy campaigns enables the detection of transient events such as trace gas emissions. However, current processing pipelines depend on slow, on-the-ground processing, which delays the time to information of each detected event and prohibits immediate follow-up actions. During the Tokyo Field Campaign of March 2026, we explored on-board processing of Imaging Spectroscopy data from the equipped AVIRIS-5 sensor. Due to communication bottlenecks, full datacubes cannot be downlinked immediately during the flight. Instead we downlink the potential events predicted by our efficient and small machine learning model. We show the first on-board detection of methane point source emission with Imaging Spectroscopy data using Edge ML.

Comment
2 pages; presented as a short (2 pages) paper at the IEEE HPEC26

Closest papers

Nearest neighbours by meaning across the whole index.

Methane Detection On Board Satellites from Unorthorectified Imagery

cs.CV cs.AIcs.LG ·2026-09-04 ·Luca Marini, Maggie Chen, Hala Lamdouar, Laura Martínez-Ferrer, Dr C. P. Bridges +1 more
datasetcode/data similarity 0.68
Abstract

As a potent greenhouse gas, methane is a major driver of climate change. Its effective mitigation relies on timely detection. Conventional detection methods rely on orthorectification to correct geometric distortions and matched filters to enhance plume signals, which are steps designed for ground processing and poorly suited to onboard execution. We introduce UnorthoDOS, a dataset and approach for training machine learning models directly on unorthorectified hyperspectral imagery, bypassing both orthorectification and matched-filter products. Our U-Net models trained on unorthorectified data approach the performance of models trained on orthorectified data (IoU 16.91% vs. 18.47% on all plumes), while both substantially outperform the mag1c matched-filter baseline (IoU 4.76%). We further demonstrate the feasibility of onboard deployment: FP16 compression halves model size with under 0.3% output deviation. The trained ML models and two ML-ready datasets -- orthorectified and unorthorectified hyperspectral imagery from the EMIT sensor -- are publicly available at https://huggingface.co/datasets/SpaceML/UnorthoDOS, with code at https://github.com/spaceml-org/plume-hunter.

0.35

MethaneFuse: Learning from Multi-Sensor Satellite Observations for Methane Plume Detection

cs.CV cs.LG ·2026-09-09 ·Yuyao Wang, Juliana Y. Leung, Di Niu
dataset similarity 0.64
Abstract

Methane plume detection from satellite imagery is constrained by incomplete observations: public satellites provide complementary spatial, spectral, and atmospheric evidence, but real plume cases rarely contain fully paired multi-sensor measurements because of revisit schedules, cloud coverage, acquisition quality, and the transient nature of emissions. Most learning-based detectors rely on single-sensor inputs, especially Sentinel-2 (S2), leaving many reported plume cases unusable. We construct MethaneUnion, a temporal multi-sensor dataset built from Carbon Mapper plume reports and matched S2, Landsat 8/9 (L8/9), EMIT, and Sentinel-5P (S5P) observations. Built on MethaneUnion, MethaneFuse learns from heterogeneous satellite observations under partial sensor availability without requiring complete four-sensor measurements. MethaneUnion expands usable coverage from 3,211 valid S2-matched plume cases to 8,981 reported plume cases with multi-sensor observations. At the representative 480 m setting, MethaneFuse achieves 84.87 F1 and 93.62 AUROC, improving over the strongest baseline by 5.65 F1 and 8.30 AUROC points while reducing false positives by 8.19 points. Sensor-availability experiments show that MethaneFuse improves detection when S2 is available and transfers plume knowledge to L8/9, EMIT, and S5P when S2 is unavailable. These results demonstrate the value of learning from incomplete heterogeneous sensor observations for practical methane plume detection.

0.13

AI-Based On-Board Maritime Object Detection for Earth Observation Payload Data Reduction on Versal Embedded Hardware

cs.CV cs.AI ·2026-10-08 ·Thomas Goudemant, Aurélien Bobey, Omar Hlimi, Marjorie Bellizzi
similarity 0.55
Abstract · 8 pages. Accepted at the 10th On-Board Payload Data Compression Workshop (OBPDC 2026), Barcelona, Spain, 12-14 October 2026

Very-high-resolution Earth-observation satellites acquire more data than they can store and downlink, while in maritime surveillance the vessels cover a tiny fraction of each scene. We study onboard vessel detection as a way to select what is downlinked, which reduces the data according to its content rather than coding every pixel; it is complementary to conventional onboard compression. The work follows three axes. (i) Data and algorithm: a controlled dataset is generated from 68 annotated Maxar scenes with 43 vessel classes, and a YOLOX-S detector is trained on it. (ii) Embedded deployment: the detector is quantized and deployed on the DPU of a Versal VC1902, with a limited loss of detection quality and a processing time of a few seconds per scene. (iii) Data reduction: we propose several downlink modes, from metadata only (box, class and score of each detection) to image crops around vessels, tiles holding detections, or the whole scene with a degraded background, and estimate from the measured detection errors the trade-off each offers between the vessels kept and the volume downlinked. On our dense harbor and coastal scenes, tiles keep 98% of the vessels with 29% of the scene volume, and crops 83% with 3%.

0.39

A Generic On-Board AI Processing Chain for Earth Observation: From Application Development to Embedded Deployment and Mission-Level Orchestration

cs.AI cs.ARcs.DC ·2026-10-19 ·Michel-Fran{\c c}ois Foulon, Liz Ramos Medina, Thomas Goudemant, Clotilde Szywala, Virgile Robles +3 more
similarity 0.53
Abstract

Earth observation satellites acquire more data than they can downlink. Extracting information on board with artificial intelligence (AI) turns the satellite into a data-reduction stage that downlinks compact products, such as masks or detections, instead of full scenes; deploying it in a mission, however, involves the whole processing chain and not only the neural network. We present a generic on-board AI processing chain along three axes, with wildfire segmentation as the worked example among ship detection and cloud segmentation. (i) The AI model is tuned (spectral-band selection, input normalization), quantized to 8-bit integers (int8) and ported to an AMD Versal VCK190, with its excellent segmentation performance preserved on the board. (ii) A modular tiler-inference-mosaicer workflow, reused unchanged across applications, brings the tile-level model to scene level, turning a full acquisition into a scene-level mask or detection list. (iii) Each step is packaged as a unikernel and orchestrated on board by ORCHIDE, a cloud-native orchestrator. The chain is characterized end to end, from the standalone execution on the target to its execution under orchestration with parallel workflows on a representative test bench. Beyond AI inference on individual tiles, this approach aims at increasing the maturity of on-board AI deployment by addressing a complete processing chain, from the acquired scene to the mission-level execution.

0.37

HiPredict: Predicting the missing HiRISE RED4 spectral channel with machine learning

cs.LG ·2026-10-16 ·Ardan Suphi, Ben Moseley, Gareth S Collins, Valentin T Bickel, Vidhya G Rangarajan
similarity 0.52
Abstract

The High Resolution Imaging Science Experiment (HiRISE) onboard the Mars Reconnaissance Orbiter (MRO) acquires imagery of Mars at 25--30 cm/pixel, supporting studies of martian geology, climate history, and landing-site characterization. Its 14-detector focal plane assembly includes several overlapping detectors that enable the acquisition of three-channel colour-infrared images, which are important for identifying compositional variations and studying active surface processes. In 2023, a detector in the center of the focal plane assembly (RED4) began failing intermittently, creating a gap in acquired imagery and reducing the instrument's colour-imaging capability by half. The HiRISE processing pipeline provides a synthetic red (SYN4) channel obtained by linearly scaling the co-located infrared (IR10) channel. However, this approach cannot capture observed non-linear relationships between the colour channels, limiting its accuracy and applicability. Here, we present HiPredict, a machine-learning framework that reconstructs RED4 from co-located IR10 and blue-green (BG12) imagery, neighbouring red-channel observations, and acquisition metadata. The model employs a U-Net architecture to learn non-linear spatiotemporal-spectral relationships between these inputs and is trained on 81,717 training samples, representing 13,625 observations. Evaluated on 23,348 test samples, representing 3,892 pre-failure observations, HiPredict reconstructs RED4 with a Normalised Mean Absolute Error of 1.1%, substantially outperforming SYN4 (3.1%). The reconstructed products improve colour image recovery and more closely represent features of interest such as icy craters, stratigraphy exposed along ridge crests and chloride deposits. We release HiPredict as an open software tool. This work demonstrates the potential of machine learning to mitigate data loss as planetary missions age and naturally degrade.

0.22

Progress and Prospect of AI in ARPES Workflow

cs.LG cond-mat.otherphysics.data-an ·2026-10-07 ·Sandy Adhitia Ekahana, Aalok Tiwari, Pratik Saud, Aaron Bostwick, Chris Jozwiak +2 more
code/data similarity 0.52
Abstract

Artificial intelligence (AI) is becoming an increasingly useful tool across the experimental sciences, including angle-resolved photoemission spectroscopy (ARPES), which routinely produces large, multidimensional datasets of electronic structure. Recent advances in AI and machine learning (ML) have opened new opportunities across the entire ARPES workflow, from automated sample preparation and real-time data acquisition to post-experiment data analysis and comparison with theoretical calculations. Despite this progress, a comprehensive review of ML applications, their capabilities, and reliability across the different stages of ARPES workflow is still lacking. In this review, we first introduce ML methods that are most relevant to experimentalists working in condensed matter physics and materials science. We then follow the ARPES workflow, reviewing existing ML applications at each step and discussing their advantages, limitations and potential for future development. We also examine the current ARPES data landscape, where several open databases are available but remain relatively small and fragmented compared with large, shared datasets such as ImageNet. Given these limitations, we suggest that the community focus on sharing pretrained models that can be further trained, adapted to specific tasks, and redistributed, while working toward a larger and standardized open ARPES dataset repository. Finally, we discuss our perspectives on the future of AI within the ARPES workflow using a six-level framework of laboratory automation, highlighting the opportunities and challenges in moving toward a fully autonomous, self-driving ARPES laboratory.

0.43

AI-Powered Flare Combustion Efficiency Estimation

cs.AI cs.CV ·2026-09-10 ·Afeefa Azam, Iyyakutti Iyappan Ganapathi, Fares Ossama Abdelhafez, Divya Velayudhan, Maregu Assefa Habtie +3 more
top venue similarity 0.51
Abstract · Accepted at the 4th International Conference on Machine Learning and Data Engineering (ICMLDE 2025). 5 pages

Achieving high combustion efficiency in flare stacks is crucial for adhering to regulatory standards and controlling the release of hydrocarbons into the environment. Traditional instruments like gas analyzers and hyperspectral cameras are expensive, fragile, and require frequent calibration, which makes them impractical for remote or budget constrained industrial sites. We propose an innovative solution that combines a lightweight vision-language encoder with a compact multi-layer perceptron to predict combustion efficiency directly from low-cost thermal video footage. The fully trained model is integrated into an easy-to-deploy graphical user interface. This interface overlays predicted combustion efficiency values on each video frame, displays real-time trends in combustion efficiency, shows the distribution of combustion efficiency across all frames in the video, and allows users to export CSV reports. Over a six-month period, the system achieved 99% uptime and required less than 15 minutes of maintenance per week.

0.51

Spatial-Temporal Hybrid Path Planning for Multi-UAV Methane Emission Rate Quantification

eess.SY ·2026-10-10 ·Ruikun Wu, Derek Hollenbeck, Sihua Shao
similarity 0.51
Abstract

Accurate emission-rate quantification of methane point sources is essential for inventory verification and leak detection. UAV-borne sensing provides high-resolution, near-source measurements, but existing quantification methods mostly follow a predefined trajectory and rely on a single UAV. Building on a source receptor matrix (SRM) estimator and empirical observability Gramian (EMGR)-based path planning, this paper proposes a spatial-temporal hybrid path planning strategy for multi-UAV methane emission rate quantification. Measurements are time-averaged, and the forward Gaussian plume model is calibrated against a filament-based plume simulator (MOABS) to reduce model mismatch. Cooperating UAVs first spread out spatially to locate the source quickly, then switch to sequentially retracing a leader trajectory with a time lag to reduce quantification variance. Simulations show that the spatial stage localizes the source markedly faster than a single-UAV baseline, the temporal stage yields the lowest variance but converges slowly, and the proposed hybrid strategy converges substantially faster than the purely temporal strategy while matching its steady-state accuracy, with a narrower error band than the purely spatial strategy. A window-length study further shows that longer time-averaging windows exhibit diminishing returns, justifying the balance between spatial coverage and temporal averaging.

0.23