CS Paper Radar

PerfReasoning: How Well Do LLMs Reason on Hardware Performance?

Dan Zhao, Karthikeyan Sankaralingam, Christos Kozyrakis, Qijing Huang

cs.AI cs.PF ·submitted 2026-09-03 21:00 UTC · v3
benchmark

Abstract

Performance modeling is central to hardware design and software optimization, yet constructing these models requires structured reasoning about computation, data reuse, storage, and movement. We introduce PerfReasoning, a benchmark that evaluates LLMs both as direct performance reasoners and as generators of analytical performance-model code. Given workload, architecture, and mapping specifications, models compare mappings and predict off-chip traffic and buffer requirements. The strongest closed-source models exceed 90% on reasoning-based Q&A, and the best open-weight model reaches 82.4%. However, model construction is substantially harder: while GPT-5.6 Sol exceeds 80% pass rate, all other model configurations average below 45% and vary markedly across runs. Task-specific RL raises a 4B model's mapping-reasoning accuracy by 15.7 points, whereas feedback-free multi-round self-revision prompting is not reliably effective. PerfReasoning exposes the gap between plausible architectural reasoning and reliable performance-model construction. We will publicly release the benchmark to support reproducible evaluation and track future progress.

Closest papers

Nearest neighbours by meaning across the whole index.

HeteroReason: Heterogeneous FPGA-GPU Acceleration for Disaggregated Speculative Reasoning

cs.AR ·2026-09-23 ·Zehuan Zhang, Quan Deng, Zibo Ren, Hao Mark Chen, Guoyu Li +6 more
similarity 0.69
Abstract

Large Reasoning Models (LRMs) have achieved state-of-the-art performance in reasoning tasks by utilizing Chain-of-Thought (CoT) reasoning. To achieve fast execution speed, speculative reasoning techniques adopt a lightweight draft model for candidate token generation followed by process reward models (PRMs) for verification and a strong target model for refinements. This paper identifies that the existing speculative reasoning paradigm follows a strictly forward-only reasoning trajectory, which lacks robustness and can lead to severe error propagation if early reasoning steps are suboptimal. Furthermore, executing these disparate inference schemes, including sequential drafting and parallel verification on homogeneous GPU platforms, can lead to severe resource underutilization. To address this, we propose HeteroReason, an algorithm-hardware co-designed heterogeneous FPGA-GPU inference paradigm specifically tailored for LRM speculative reasoning. At the algorithmic level, we introduce a backtracking-enhanced workflow that enables the system to recover from low-quality states and explore alternative reasoning trajectories, significantly improving reasoning robustness. At the system level, the draft model is offloaded to the FPGA while deploying the PRM and target models on GPUs. A specialized workflow is optimized to achieve prefill-decode disaggregation, which exploits shadow synchronization to overlap GPU-side refinements with FPGA-side token updates to effectively hide synchronization latency. To mitigate inherent sequential constraints, we propose a step-ahead speculation and refinement scheduling scheme, transitioning the system from a sequential execution scheme to a parallel pipeline. Experimental evaluations show an average 4.2% accuracy improvement, with 1.01x-1.42x latency speedups and 1.25x-1.57x improvements in energy efficiency compared to homogeneous GPU baselines.

0.16

Measuring the Inference Energy Efficiency of Open-Weight LLMs across Benchmarks, Reasoning Modes, and Hardware

cs.AI cs.PF ·2026-10-09 ·Zeyu Yang, Wes Armour
benchmarkposition similarity 0.69
Abstract

Benchmark scores tell us what an LLM can do, but not how much energy is required to deliver that capability. We directly measure this trade-off for 86 open-weight model checkpoints, evaluated on seven benchmarks and six hardware platforms ranging from a consumer GPU to an eight-GPU server. We find large differences in energy efficiency even among models with similar capability. Most configurations lie away from the score--energy Pareto frontier: they use a median of 2.6--4.8$\times$ more energy than another configuration that scores at least as well, with differences reaching 27$\times$. Reasoning can improve capability, but enabling thinking increases energy by about 3.7$\times$ on average, and the benefit depends strongly on the model family and output budget. Generated-token count is also an imperfect proxy for energy, misordering 18--24\% of model pairs. In contrast, FP8 reduces energy by roughly a quarter with little change in score, while changing hardware largely rescales energy without changing the relative ranking of models. These results show that capability alone gives an incomplete picture of efficiency. We argue that benchmark scores should be reported together with measured energy consumption under a specified serving regime and output budget.

0.14

HPC-Bench: A Comprehensive Benchmark for High Performance Computing Codes

cs.PF ·2026-11-02 ·Bowen Cui, Junyu Yin, Tejas Ramesh, Leo Lim, Oscar Hernandez +1 more
publishedbenchmarkcode/data similarity 0.68
Abstract · Accepted at NeurIPS 2026 Evaluations & Datasets Track (poster). 31 pages, 13 figures, 19 tables

Large Language Models (LLMs) have shown strong capabilities in code generation and reasoning, motivating extensive benchmarks for evaluating functional correctness. However, performance optimization in High-Performance Computing (HPC) poses fundamentally different challenges that are not captured by existing evaluations: HPC performance depends on low-level code, intricate memory access patterns, and computational kernels embedded within sophisticated execution contexts. We introduce HPC-Bench, a performance-grounded benchmark for evaluating LLMs as optimizers of computational kernels in realistic HPC workloads, including 114 workloads across 16 HPC computational motifs. HPC-Bench provides a fully automated, end-to-end evaluation pipeline that combines program-level correctness verification with two correctness-gated metrics, Fast@k and Speedup@k, to characterize reliability and speedup under a fixed sampling budget. Our evaluation of three representative LLMs across serial CPU, OpenMP, and CUDA settings shows that stricter speedup requirements substantially reduce the probability of finding a correct and fast optimization. HPC-Bench is available at https://github.com/Deep-Learning-Profiling-Tools/HPC-Bench.

0.48

BitNest: Bit-Nested Speculative Decoding for Memory-Efficient LLM Inference Acceleration

cs.AI ·2026-10-02 ·Chence Yang, Ningxi Cheng, Arash Akbari, Qitao Tan, Qingchan Zhu +7 more
similarity 0.68
Abstract

Speculative decoding accelerates autoregressive generation by using a lightweight draft to propose multiple tokens for parallel verification. However, existing methods often require an additional draft model or weight representation, introducing non-negligible memory overhead on resource-constrained devices. Self-speculative approaches reduce this overhead, yet still face trade-offs between draft quality, target quality, and storage efficiency. We propose BitNest, a bit-nested speculative decoding framework that embeds a low-precision draft directly into the higher-precision target representation. Instead of deriving a draft from a predefined target, BitNest first constructs a strong low-precision base and then recovers the higher-precision target through residual refinement, enabling both models to share a single physical weight representation. BitNest further extends this progressive-precision design to the KV cache for long-context inference. Across multiple 7B--8B edge-friendly LLMs and diverse workloads, BitNest achieves an average speculative acceptance rate of 95.2% while closely preserving higher-precision model quality, and delivers 1.48--1.61x end-to-end speedup over FP16 autoregressive decoding. On the LLaMA models supported by all representative self-speculative baselines, BitNest also achieves consistently competitive or higher decoding speedup.

0.11

A Measurement Study of LLM Inference Trade-offs Across Edge Continuum Hardware

cs.DC cs.AIcs.LG ·2026-09-08 ·Maysam Khatib, Moysis Symeonides, Demetris Trihinas, George Pallis, Marios D. Dikaiakos
published similarity 0.68
Abstract · Accepted for publication at WIMS 2026

Large language models (LLMs) are increasingly used as backends for intelligent web services, but serving them across the edge continuum requires balancing quality, latency, model footprint, and energy. This paper presents a controlled measurement study of self-hosted LLM inference across edge and near-edge deployment nodes: an NVIDIA Jetson AGX Orin and a near-edge server with CPU-only and GPU-enabled inference modes. We evaluate multiple open-weight LLMs and quantization variants using a fixed question-answering workload, and compare them against GPT-4o as a cloud-hosted accuracy and latency reference. Our benchmarking pipeline reports accuracy, model footprint, per-token decoding latency, prefill latency, and overall execution energy. The results show that GPU-enabled server execution provides the lowest compute-side latency, while Jetson Orin shows lower measured energy, consistent with its lower platform power under our setup. CPU-only execution is consistently dominated in latency for our workload and shows higher measured energy. We also show that parameter count and downloaded weight-file size alone do not reliably predict observed accuracy or latency. Finally, using Pareto-frontier analysis, we study how deployment decisions may change under possible streamed-token delivery overheads, highlighting that compute-side inference metrics alone can lead to suboptimal placement for latency-sensitive interactive web services.

0.26

OpWeave: Flexible Operator Disaggregation for Heterogeneous LLM Serving

cs.DC cs.AI ·2026-09-13 ·Zikun Li, Yixuan Mei, Shiqi Pan, Zixuan Chen, Xiaowen Zhang +7 more
highly cited similarity 0.67
Abstract · 24 pages, 14 figures, including references and appendices

LLM serving systems increasingly disaggregate inference into finer-grained stages, with recent approaches separating attention from FFN or MoE execution during decode. This operator-level disaggregated serving (ODS) can improve hardware matching and enable independent scaling, particularly across heterogeneous devices. However, existing systems fix operator boundaries and lack a unified characterization of when disaggregation reduces serving cost. We present OpWeave, an end-to-end framework for heterogeneous ODS. OpWeave provides an analytical cost model that bounds the gains of homogeneous and heterogeneous ODS over colocated serving. It jointly optimizes operator partitioning and deployment configuration through a regularity-aware planner that keeps the search tractable even for hybrid-attention models. A vLLM-based runtime executes the synthesized plans with flexible operator stages across heterogeneous device groups. In our evaluation, OpWeave reduces serving cost by up to $1.78\times$ on homogeneous and $1.89\times$ on heterogeneous GPU clusters relative to the best feasible baseline, while meeting latency SLOs.

0.46

Green Code or Costly Code? Evaluating the Energy Costs of Iterative LLM-Based Code Optimizations

cs.SE cs.AI ·2026-10-23 ·Sadra Emami, Benjamin Weigell, Mohammad Reza Mousavi, Gunel Jahangirova, Hugo Araujo +1 more
top venuebenchmarkcode/data similarity 0.67
Abstract · Accepted at the 49th IEEE/ACM International Conference on Software Engineering (ICSE 2027)

Large Language Models (LLMs) are increasingly used to optimize code for performance. This practice often assumes that improvements in execution speed naturally translate into overall lower energy consumption. We challenge this assumption empirically by measuring whether performance-optimized code produced by LLM self-refinement pipelines is also energy-efficient relative to canonical human reference solutions, and whether the energy cost of the optimization process can be offset by subsequent execution-time savings. We evaluate 11 open-source models across four decoding configurations on all 1,000 problems of EffiBench, a state-of-the-art performance benchmark, while collecting per-process, hardware-level energy measurements throughout. Inference energy spans 0.79 to 8.68 MJ across model-variant pairs, which is roughly equivalent to the energy of 250 to 2800 GPT-4.1 queries. Limiting the maximum number of output tokens has the largest impact, reducing energy use by up to 69% compared to the default configuration. On the execution side, 42 of 44 configurations produce code that consumes more energy per problem than the canonical human reference, with overheads ranging from +4% to +886%. The two exceptions achieve only marginal gains, with break-even points on the order of 10^6 to 10^7 executions. Mixture-of-Experts architectures consume substantially less inference energy than equivalently-sized dense models without sacrificing correctness, making architectural choice a more consequential sustainability lever than decoding parameters. Performance optimization and energy efficiency are not always aligned goals: LLM self-refinement consistently produces faster-seeking but energy-heavier code relative to what a human engineer would write. All artifacts are available at https://doi.org/10.5281/zenodo.23598170.

0.41

Taming Speculative Search for Test-Time Scaling in LLM Serving

cs.DC cs.CLcs.OS ·2026-09-30 ·Jinwoo Jeong, Woohyung Choi, Myeongjae Jeon, Jeongseob Ahn
similarity 0.67
Abstract · 14 pages

Test-time scaling has recently emerged as a powerful approach for improving LLM reasoning by allocating additional computation during inference, substantially enhancing accuracy on challenging tasks such as mathematics and coding. To accelerate the exploration of reasoning paths, recent studies proposed speculative execution. However, we show that supporting speculative execution poses two unique challenges for LLM serving systems: (1) an explosion in the search space of candidate paths and (2) frequent, fine-grained verification tasks for candidates. To address these challenges, this paper proposes SpecScale, a serving system for efficient speculative execution. We introduce three techniques to reconcile the trade-off between latency and computational overhead: (1) early pruning of low-quality candidate paths, (2) deduplicating computation across redundant candidate paths, and (3) deferring fine-grained verification tasks. We evaluate SpecScale on challenging reasoning benchmarks, including MATH and Olympiad. Our results show that SpecScale significantly outperforms both non-speculative and recent speculative approaches, delivering substantial improvements in throughput and latency while preserving answer quality.

0.25