CS Paper Radar

When Quantization Breaks Memory: Recurrent-State Write-Back in Low-Precision Temporal Inference

Ismail Erbas, Xavier Intes, Vikas Pandey

cs.AI cs.LGphysics.opticsq-bio.QM ·submitted 2026-09-03 21:23 UTC · v1

Abstract

Quantization is widely used to reduce the computational and memory demands of neural-network inference. In recurrent networks, however, the quantized state is stored and returned at the next time step, so the rule used to store that state can alter subsequent computations. Here, we introduce recurrent-state write-back to denote this rule and isolate its effect in a compact GRU encoder--decoder for fluorescence lifetime imaging, a molecular imaging modality used in quantitative biological imaging. A central task is estimating two lifetime parameters, the short-lived component τ1 and the long-lived component τ2, from high-noise time-resolved fluorescence signals. Holding the trained model fixed, replacing continuous state propagation with deterministic 4-bit state storage increases estimation errors for τ1 and τ2 by approximately 70x and 300x, respectively. Failure occurs when repeated small updates remain below the write threshold, leaving the stored state nearly fixed while the network continues to propose change. Error feedback, residual memory, and direction memory carry information from these suppressed updates across time and recover accuracy without retraining. Precision sweeps show that increasing state precision can worsen a fixed recurrent solution, while matched training shows that compatibility with the state interface can be learned. To test whether this behavior extends beyond the GRU, we repeat the post-training intervention in an independently trained LSTM, where coarse write-back reproduces the failure, error feedback restores accuracy, and state-specific interventions reveal greater sensitivity of the cell state than the hidden state. Our results establish recurrent-state write-back as a key determinant of low-precision recurrent dynamics and identify the state-storage interface as a central design consideration for quantized recurrent inference.

Comment
28 pages, 8 figures

Closest papers

Nearest neighbours by meaning across the whole index.

DAMP: Decay-Aware Mixed-Precision Recurrent-State Quantization

cs.LG cs.AI ·2026-08-27 ·Tao Zhang, Jianchao Tan, Pingwei Sun, Yanqi Yu, Zunhai Su +4 more
highly cited similarity 0.64
Abstract

Complex reasoning and agentic applications increasingly rely on long-context inference, where growing KV caches increase both memory usage and decoding overhead. Hybrid models reduce these costs by combining Softmax Attention with Gated DeltaNet (GDN) or Kimi Delta Attention (KDA), which maintain fixed-size recurrent states. These states are commonly stored in FP32 and consume substantial GPU memory, while their updates are limited by memory bandwidth. Quantization can reduce both storage footprint and memory traffic, but we find that uniform INT8 and FP8 degrade complex reasoning accuracy, while INT4 and NVFP4 collapse it to near zero. To our knowledge, this is the first study of post-training recurrent-state quantization for GDN and KDA. Our analysis reveals that outliers in GDN and KDA states are concentrated in particular key channels and value dimensions. Learned decay influences how much quantization error is retained. We find that largely the same GDN heads and KDA key channels exhibit slow decay across tasks. Based on these insights, we propose DAMP, which jointly considers quantization error and decay-based error retention to select high-risk key channels offline. Under a fixed storage budget, it retains these channels in FP16 and stores the remainder in INT8. We evaluate DAMP on Qwen3.6-35B, Kimi-Linear-48B and Kimi-K3 across six reasoning and code generation benchmarks. At 9.9 bits per state value, DAMP maintains average accuracy close to FP32. In SGLang, DAMP reduces recurrent-state storage by 69.1%, accelerates the recurrent-state update kernel by up to 2.59x , and lowers full-model time per output token by up to 19.0%.

0.37

Continuous Memory Machines

cs.AI ·2026-10-06 ·Ciaran Regan, Kai Arulkumaran, Luke Darlow, Stefania Druga, Sebastian Risi +1 more
publishedcode/data similarity 0.63
Abstract · NeurIPS 2026 Workshop: Personalized, Aligned, Long-Term Memory for AI Systems (PALM)

Recurrent neural networks typically compress information into a single vector-valued recurrent state, forcing short-term computation and long-term retention to share the same representation. Past extensions alleviate this bottleneck by increasing the memory capacity or separating timescales, but lack the combination of rapid neuron-level processing and longer-term retention found in biology. To that end, we introduce the Continuous Memory Machine (CMM), a recurrent architecture with matrix-valued short- and long-term memory states serving distinct functional roles. Building on the Continuous Thought Machine (CTM), the CMM's short-term memory tracks recent neural activity, with uniquely parameterized neuron-level models learning to use these activity patterns for computation. A persistent long-term memory stores information for later use, with a Transformer jointly updating both memory stores, providing an expressive bidirectional read--write mechanism such that each store can reorganize its own contents and both read from and write to the other. Across algorithmic, in-context learning, and recurrent reasoning tasks, the CMM outperforms a broad suite of baselines, exhibiting stronger generalization than prior memory-augmented networks while preserving the CTM's interpretable attention patterns. Code is available at https://github.com/SakanaAI/continuous-memory-machines.

0.43

What to Preserve, Where to Adapt: A Depth-Wise Analysis of Forgetting in Continual Gynecological Image Segmentation

cs.CV cs.LG ·2026-08-13 ·Amal Saqib, Tausifa Jan Saleem, Numan Saeed, Mohammad Yaqub
similarity 0.62
Abstract

The clinical management of gynecological diseases often relies on medical imaging for diagnosis, treatment planning, and follow-up. Segmentation in this setting is challenging because successive tasks may differ in imaging modality, target anatomy, pathology, and annotation structure. Continual learning allows models to adapt to new tasks without simultaneous access to previous datasets. However, when successive tasks differ substantially, learning a new task can degrade performance on earlier ones, a problem known as catastrophic forgetting. Understanding where adaptation disrupts previous knowledge can help guide the design of more targeted continual-learning strategies. We investigate how forgetting changes as different parts of an encoder--decoder network are allowed to adapt. We progressively expand the trainable region of a 3D nnU-Net backbone from the bottleneck toward input- and output-proximal blocks. Under a shared learning rate, adaptation near the bottleneck largely preserves previous-task performance but provides limited current-task learning, whereas broader adaptation improves current-task performance but sharply increases forgetting. This trade-off persists even when the average change in trainable backbone parameters is approximately comparable. Assigning different learning rates to different blocks substantially reduces forgetting when part of the backbone is trainable, although this changes both the size and location of the updates. Forgetting still increases as more blocks are trained and remains severe when the full backbone is updated. These results show that forgetting depends not only on how much the model changes, but also on which parts of the model are allowed to change.

0.04

Low-Bit GDN Recurrent-State Quantization: Global Gradient-aware Allocation and Pure-Write Sliding Windows

cs.LG ·2026-10-29 ·Qinghang Huang, Xuchu Huang, Xunzhao Yin
similarity 0.61
Abstract · 24 pages, 13 figures

Linear attention stores historical information in a recurrent state of fixed size, providing a compact memory representation for long-context inference. Reducing state precision further lowers per-request storage requirements, but quantized writeback errors enter subsequent recurrences, degrade prediction quality on long-reasoning tasks, and can be accompanied by repetitive generation and excessively long outputs. We propose Global Gradient-aware Allocation (GGA) and the Pure-Write Sliding Window (PW) to address precision allocation and recent-information maintenance. GGA combines candidate quantization residuals with gradient sensitivity to future prediction loss to allocate head bit widths under a model-wide mixed-precision budget. PW independently maintains recent pure writes as FP8 vector pairs, propagates them through the full GDN state transition, and merges them into the low-bit historical state only after they leave the window. Across seven evaluations on Qwen3.5-4B/9B, GGA allocation alone improves over STEPQuant@4 by 19.48/29.84 percentage points. Adding PW-S8 yields seven-task macro-averages of 69.83%/78.63%, improving over STEPQuant@4 by 38.39/41.21 percentage points, respectively. Both precision reallocation and window maintenance improve task scores while mitigating excessively long outputs: at @6, GGA reduces mean generation length, averaged equally across tasks, by 10.45%/14.65% relative to STEPQuant; adding PW-S8 to GGA@4 further reduces mean generation length by 32.32%/36.77%. Comparisons at similar storage budgets further show that using additional capacity to maintain recent writes yields higher task scores and shorter mean outputs than solely increasing the bit width of the accumulated state.

0.43

SpikeSSL: A Universal Spike Inference Framework with Dynamics-Informed State-Space Layers

cs.AI ·2026-10-08 ·Chenghao Yue, Siming Xing, Shuran Liu, Angran Li, Yuanlong Zhang
benchmarkcode/data similarity 0.60
Abstract

Two-photon calcium imaging is a standard tool for recording large neural populations in vivo, yet inferring spikes accurately across the growing diversity of calcium indicators remains an open problem. Existing supervised methods achieve reasonable in-domain accuracy but generalize poorly to unseen indicators, because different indicators induce distinct fluorescence kinetics and signal statistics while existing architectures remain relatively simple generic temporal regressors without dynamics-matched inductive bias. We propose SpikeSSL, a universal spike inference framework whose temporal backbone is a bank of bidirectional IIR state-space layers broadly motivated by calcium dynamics. A multi-modal conditioning encoder maps indicator identity, sampling rate, and trace-level signal statistics into a global conditioning vector that modulates the backbone via Adaptive Layer Normalization, while a heteroscedastic variance head provides calibrated per-frame uncertainty. On a benchmark with five fixed evaluation splits built from 33 public ground-truth datasets, SpikeSSL achieves state-of-the-art performance in both in-domain and zero-shot leave-one-indicator-out settings. We also develop a biophysical simulation pipeline capable of generating paired fluorescence-spike traces with systematically varied kinetic parameters, spike statistics, response nonlinearities, baseline drift, and noise. Using this pipeline, we synthesize approximately 11,000 simulated traces. Augmenting training with these data effectively closes the cross-indicator domain gap and improves zero-shot generalization. Code is publicly available at https://github.com/detimage123/SpikeSSL.

0.30

STEPQuant: When and Where Errors Matter in Delta-Rule Recurrent State Quantization

cs.CL cs.AIcs.LG ·2026-09-29 ·Bingchen Yao, Haobo Xu, Haokun Lin, Yichen Wu, Ziyu Guo +4 more
code/data similarity 0.59
Abstract · Technical Report

Linear attention replaces growing KV caches with fixed-size recurrent states, yet these persistent states can become a substantial memory bottleneck under concurrent serving. Directly quantizing recurrent states to low precision often leads to severe accuracy degradation, as quantization errors propagate through successive state updates. We discover that the impact of these errors depends on two complementary dimensions: temporally, errors in long-lived memory can persist across many decoding steps; spatially, errors in different key rows affect model outputs differently, while state magnitudes vary substantially along both rows and columns. Motivated by these observations, we propose STEPQuant, a spatial-temporal post-training quantization framework for Delta-rule recurrent states. STEPQuant allocates precision according to error magnitude and memory lifetime, and jointly fits key-row and value-column scales based on state distributions and key-row impact on output error. Experiments on Qwen3.8-27B and Kimi-Linear-48B-A3B-Instruct across both long- and short-generation benchmarks show that STEPQuant closely matches FP32-state accuracy under a nominal 6-bit budget and outperforms uniform INT8 in its 4-bit configuration. Integrated into SGLang with optimized GPU kernels, 6-bit STEPQuant achieves over 5x recurrent-state compression and reduces total serving memory by up to 68.7%. Our code is available at https://github.com/Dreamer-Toby/STEPQuant.

0.56

PyFLI: A Python Library for Simulation, Parameter Estimation, and Benchmarking in Fluorescence Lifetime Imaging

cs.MS q-bio.QMphysics.med-phphysics.optics ·2026-09-09 ·Vikas Pandey, Ismail Erbas, Margarida Barroso, Stefan Radev, Xavier Intes
code/data similarity 0.59
Abstract

Fluorescence lifetime imaging (FLI) measures the temporal decay of fluorescence after excitation and provides quantitative information about a fluorophore's local environment and molecular interactions. Depending on the fluorophore and experimental design, lifetime can report changes associated with pH, oxygenation, cellular metabolism, and Forster resonance energy transfer. These properties make FLI useful across microscopy, biophysics, biomedical optics, and preclinical imaging, where the same type of molecular contrast can be studied across different biological scales. FLI measurements, however, are acquired with instruments that record fluorescence in different ways. Intensified charge-coupled device (ICCD) cameras, single-photon avalanche diode (SPAD) arrays, and time-correlated single-photon counting (TCSPC) systems differ in temporal sampling, data organization, detector noise, instrument response, and file format. Lifetime-estimation methods also make different assumptions about the recorded decay, while learning-based approaches require realistic training and validation data for which the underlying parameters are known. PyFLI is an open-source framework for FLI processing and standardized data simulation. It imports measurements from acquisition systems, simulates labeled data under configurable acquisition and noise conditions, and provides complementary approaches for parameter estimation. These include nonlinear least-squares fitting (NLSF), maximum-likelihood estimation (MLE), phasor analysis, rapid lifetime determination (RLD), Laguerre-based estimation, and optional Bayesian and deep-learning inference. CPU and GPU processing support image-scale analysis, while reconstruction, visualization, statistical analysis, and cross-software comparison provide tools for evaluating results. PyFLI includes compressed-sensing reconstruction for single-pixel hyperspectral FLI.

0.55

The Dormant Spiking Neuron: A State-Driven Mechanism for Efficient Spiking Neural Networks

cs.CV ·2026-10-15 ·Ruichen Ma, Yicai Chen, Pujun Zhou, Yue Zuo, Chongyang Li +3 more
top venue similarity 0.59
Abstract · NeurIPS 2026 Accepted

Spiking neural networks (SNNs) offer a compelling pathway toward energy-efficient artificial intelligence, fundamentally anchored in presynaptic input-driven sparsity. However, a substantial yet chronically overlooked source of computational overhead persists: the continuous subthreshold dynamics of postsynaptic neurons. Quantitative analysis reveals that up to 44% of neurons in an ImageNet-trained ResNet-18 model reside in a deeply inhibited state, imposing a persistent computational burden despite having a negligible probability of firing. To address this inefficiency, the Dormant Spiking Neuron (DSN) model is introduced. By incorporating a state-driven dynamic gate, the DSN allows a neuron to enter a dormant state when its membrane potential falls below a predefined negative threshold, dynamically pruning redundant computations at the instance level. Crucially, this dormancy mechanism is directly integrated into the neuronal dynamics and trained end-to-end via backpropagation through time using surrogate gradients, enabling the network to actively learn a robust dormancy policy that adaptively preserves critical information flow. Extensive experiments across static and neuromorphic datasets demonstrate that the DSN framework consistently reduces computational energy by 40% to over 70%. Notably, on the large-scale ImageNet dataset, the DSN outperforms state-of-the-art static pruning techniques at comparable reported cost reductions and simultaneously improves the corresponding baseline SNN accuracy by 1.34%. By establishing a trainable, state-driven sparsity paradigm orthogonal to conventional input-driven methods, the DSN unlocks synergistic efficiency gains, presenting an effective approach for advancing neuromorphic computing.

0.34