CS Paper Radar

Diffs vs. Whole Files: An Empirical Comparison of Iterative Edit-Based and Direct Generation for Flutter/Dart Code Models

Andrej Andrejev

cs.SE cs.AI ·submitted 2026-09-05 00:13 UTC · v1
hot direction

Abstract

Large language models used for code editing can be trained and deployed in at least two output regimes: direct generation, where the model emits the entire modified file in one shot, and iterative diff-based generation ("steps"), where the model emits a sequence of localized search/replace edits applied one at a time until it signals completion or a step budget is exhausted. The diff-based regime is attractive because it mirrors how developers edit code and should require far fewer generated tokens per turn. We train two code models - a 100M-parameter model trained from scratch (Rainbow-Pony-100M) and a fine-tuned Qwen2.5-Coder-0.5B - in both regimes on a shared Flutter/Dart dataset, and evaluate all four resulting models on a held-out set of approx 1,790 tasks per model. Direct generation substantially outperforms diff-based generation on every metric we measure - compilation/static-analysis pass rate, bits-per-byte, character-level similarity to the reference, and blinded LLM-judge ratings of goal fulfillment, correctness, and code quality - and the gap persists after controlling for task difficulty via a matched-ID comparison and when restricting to code that compiles on both sides. We then identify a single, architecture-independent mechanism behind the conditions where diff-based generation does win: it is competitive on short, spatially localized edits, and its category-level wins concentrate in exactly the two task categories - refactoring and error-handling/edge-case fixes - with the lowest mean edit-step count in our dataset. We term this task locality and discuss its implications for when an edit-based training regime is and is not the right choice for a code-editing model.

Comment
19 pages, 7 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Diff Diffusion: Predicting Edit Paths with Diffusion Models for Efficient Code Editing

cs.SE cs.AIcs.CL ·2026-10-13 ·Xiaolong Xu, Hao Jiang, Bo Jiang, Zhiwen Deng, Ningyuan Sun +3 more
published similarity 0.71
Abstract · 15 pages, 3 figures, 6 tables. Accepted at the NeurIPS 2026 Workshop on Diffusion Language Models: Foundations, Efficiency, and Reasoning

Diffusion large language models (dLLMs) are appealing for code generation because they can update many tokens in parallel, yet many are optimized for sequence synthesis rather than edit prediction. This setting is poorly matched to modern AI-assisted IDEs, where edit prediction must infer the next code change from recent edits, the current file, and cursor-local context. Such changes are usually sparse and preserve most source tokens, so regenerating a full code segment wastes computation. We propose Diff Diffusion, a diffusion-inspired LLM framework for code editing that predicts edit paths from an original snippet to its revised form. Diff Diffusion represents denoising as structured edit operations, and combines this formulation with multi-stage training and efficient parallel decoding. By focusing computation on changed regions, Diff Diffusion supports accurate low-latency edits and multi-position parallel modification. Across public edit-completion benchmarks, edit-prediction evaluations, and online validation, Diff Diffusion matches or leads autoregressive baselines while delivering 2.78 times faster inference on public edit-completion benchmarks and a 39.0% P50 model-latency reduction in production. This work provides a new modeling perspective for AI applications that require high accuracy and low latency.

0.44

CROCODIL: Cross-Model Code Editing with LLMs

cs.CL cs.SE ·2026-09-03 ·Linghan Zhong, Aditya Thimmaiah, Jayanth Srinivasa, Milos Gligoric, Junyi Jessy Li
top venuecode/data similarity 0.63
Abstract · EMNLP 2026 Findings

Large language models (LLMs) have become ubiquitous tools for code generation and editing. However, development teams often use multiple LLM assistants. Different developers may prefer different models, and individual developers may switch between models across different coding sessions. Because of this, the edits any one model makes are frequently applied to foreign code originally generated by another model. These LLMs are often trained on different datasets, and as a result have different stylistic preferences. Do LLMs behave differently when they edit foreign code originally written by a different LLM with a different coding style? We find that models tend to make more, and often excessive, edits on foreign code. We introduce CROCODIL (Cross-model Code Editing with LLMs), a post-training framework for reducing excessive edits while preserving functional correctness. CROCODIL's similarity reward penalizes large changes, while its execution reward scores build and test success. We use the product of these two rewards to encourage the policy to decrease the edit size without decreasing the edit task success rate. CROCODIL is available at https://github.com/EngineeringSoftware/Crocodil.

0.65

AiXapply: Fast and Reliable Full-File Code Integration with Specialized Small Models for IDE Workflows

cs.SE ·2026-11-05 ·Siyuan Jiang, Xiang Cai, Peixu Wang, Yu Han, Yihong Dong +6 more
benchmarkdataset similarity 0.62
Abstract

Large language models increasingly assist developers by proposing small code edits, yet reliably integrating a partial update snippet into an existing file while preserving unrelated content remains poorly supported by current code-generation workflows. We formalize the Code Integration (Apply) task as follows: given an original file and an update snippet, the system must produce the complete merged file while preserving all content outside the requested edit. We construct a high-quality multi-language dataset from real commits via a structured pipeline that converts code changes into update snippets paired with full-file ground truth and enforces consistency through verification and filtering. We then train a specialized 4B model, aiXapply, using supervised fine-tuning and reinforcement learning (GRPO). The supervised variant achieves 94.4% accuracy under our language-aware comparison, surpassing a strong large-model (Deepseek-V3.2) baseline (91.6%). Speculative decoding enables aiXapply-RL to reach $\sim$2700 tokens/s on a single A100 in a decoding subset; on the full benchmark, it achieves roughly 75$\times$ lower latency than the API-served Deepseek-V3.2 baseline. We further conduct an industrial deployment of aiXapply-RL in the aiXcoder IDE plugin as a dedicated Apply service, reducing mean Apply latency from 50 seconds to 1.89 seconds by offloading full-file generation from the upstream large model. Under time-based capacity planning, replacing one of five upstream serving instances would save 20% of upstream machine cost before the additional shared A100 service cost. Overall, our results demonstrate that treating code integration as a standalone task enables small models to achieve high accuracy, practical efficiency, and concrete industrial benefits in real-world IDE workflows where latency, cost and privacy are critical.

0.23

When Models Edit Too Much: On the Fidelity of Minimal Code Edits

cs.SE cs.AIcs.CL ·2026-09-03 ·Tongyao Zhu, Wei Hern Lim, Min-Yen Kan
top venuehighly cited similarity 0.62
Abstract · EMNLP 2026 (Main)

Large language models (LLMs) are increasingly used to edit existing code, but correctness alone is not enough: useful repairs should also be minimal, reviewable, and faithful to the original implementation. We study over-editing, the tendency of a model to rewrite code beyond what is required to fix a bug. We construct an evaluation framework from 400 BigCodeBench problems by injecting controlled AST-level corruptions into reference solutions, giving each repair task a known minimal patch. Across frontier LLMs, over-editing is widespread even among strong models like GPT-5.5: high Pass@1 can coexist with unnecessarily large edits and added cognitive complexity. A preservation instruction substantially reduces this behavior, lowering average excess Levenshtein distance from 0.195 to 0.131, reducing added cognitive complexity by 26.6%, and increasing Pass@1 by 2.3 points. However, these gains do not simply follow from a larger reasoning budget or larger models. We next ask whether minimal editing can be learned directly during post-training. We observe that supervised fine-tuning overfits to seen corruption patterns, whereas reinforcement learning gives the best out-of-domain edit-fidelity and performance-retention trade-off. These results position edit fidelity as a distinct axis of code-repair quality and show that it can be measured and learned.

0.71

How Should Diffusion Language Models Edit Code?

cs.SE cs.AI ·2026-09-29 ·Xijia Tao, Ziru Liu, Shansan Gong, Jiacheng Ye, Kecheng Chen +5 more
similarity 0.61
Abstract

Code editing requires a model to decide where to make changes, generate the new content, and preserve everything else. We study how masked diffusion language models divide these responsibilities across four editing interfaces: whole-file rewriting, search-and-replace, locate-then-infill, and token-level editing. Experiments on CanItEdit reveal a composition gap: diffusion models can generate coordinated changes when the correct edit locations are supplied, but much of this capability is lost when those locations must be predicted. Access to the intact original code helps the model fill multiple edit regions, yet does not resolve the difficulty of selecting those regions. By varying the editable regions while holding the generation model and decoding procedure fixed, we identify two distinct requirements for successful editing: covering every required change and placing precise boundaries around it. Missing a required region prevents the corresponding change, while widening regions to ensure coverage can sharply reduce success by requiring unchanged code to be regenerated. A sentence-level Wiki editing probe shows the same qualitative gap between supplied and predicted locations beyond code. These findings show why strong infilling capability alone does not ensure reliable editing: the interface must expose all required changes while limiting regeneration of unchanged code.

0.23

Make Every Expansion Count: Learning to Search Efficiently in LLM Code Repair

cs.LG cs.AIcs.SE ·2026-10-11 ·Elad Sharony, Ido Greenberg, Jialin Song, Shie Mannor, Gal Chechik +1 more
similarity 0.58
Abstract

Large language model (LLM) code-repair systems fix faulty programs by repeatedly generating and testing revisions. Each revision is costly, making the choice of which repair to pursue important for efficiency. Existing search policies rely on test pass rates and search statistics, ignoring the details of test failures and proposed edits. We introduce CodeTriage, a learned policy that prioritizes edits before their revised programs are generated and tested. Its 0.6B-parameter model reads the test output, failure diagnosis, and proposed edit, then predicts a distribution over the number of repair steps needed to reach a fix through that edit. These predictions prioritize all pending edits across programs before generating and testing the revised code. On held-out repair tasks, CodeTriage finds fixes with 21% fewer program revisions and 12% fewer output tokens than the strongest baseline on each metric. Without retraining, it achieves the highest average success across search budgets for each of 11 unseen repair LLMs. Ablations show that both the failure context and edit text, as well as comparisons across programs, improve search. We also release a corpus of 12.2 million program versions from four LLMs, organized into repair trees with proposed edits and test results.

0.19

No One-Size-Fits-All: Adaptive Code Editing with Feature-Based Strategy Selection

cs.SE ·2026-10-16 ·Jun Wan, Zhongxin Liu, Dajun Chen, Wei Jiang, Yong Li +1 more
top venue similarity 0.58
Abstract · 23 pages, accepted to ISSTA 2026

Large language models have shown strong potential in automating code editing (CE) tasks, yet most existing systems rely on a fixed CE strategy (i.e., one-step, search-replace, and plan-apply) across diverse scenarios. In practice, CE tasks vary widely in code context, edit locality, and semantic complexity, causing no single strategy to perform consistently well. Moreover, systematic studies on the relationship between strategies and CE tasks remain scarce, limiting further optimization of LLM-based code editing strategies. To address this gap, we construct CEBench, comprising 500 real-world CE tasks curated from SWE-bench. Then we compare three representative CE strategies (one-step, search-replace, plan-apply). Our study reveals two key findings: (1) each strategy exhibits distinct advantages for specific CE tasks, with no universal optimality; (2) strategy effectiveness is significantly influenced by four core task features: total lines of code, modification type, modification scope, and task type. Motivated by these findings, we propose Ace, an adaptive code editing framework that dynamically selects optimal CE strategies based on task features. Unlike classifier-based or instruction-prompting approaches, Ace employs a fine-tuned LLM that learns feature-strategy mappings from empirical data to recommend strategies with interpretable rationales. Extensive experiments on our CEBench-verified show that Ace outperforms state-of-the-art baselines: it boosts Pass@1 by 21.7% while reducing token consumption by 27.3% compared to the best baseline (AutoCodeRover). Our strategy selector achieves 72.6% selection accuracy with 69.9% rationale accuracy (Cohen's Kappa = 0.807), providing transparent and trustworthy decision-making for developers.

0.38

When Edit Flows are Edit Jumps: replicating Edit Flows and EvoFlows

cs.LG stat.ML ·2026-09-16 ·Gabriel Bénédict, Melanie Buechler, Gerard Riera-Solà, Chloé de Ancos, Yves Gaetan Nana Teukam +1 more
code/data similarity 0.58
Abstract

Antibody lead optimization calls for a small, bounded set of edits to an existing candidate: substitutions, but also insertions and deletions. Edit-based generative models are the only ones that allocate such an edit budget without fixing the edit positions, the edit count, or the output length in advance. However, the existing approaches Edit Flows and EvoFlows did not release code or complete training specifications. Here, we show that both methods follow the same underlying process -- edits firing one at a time, at learned rates, in continuous time -- the pure-jump case of generator matching over finite sequences. With EditJumps we introduce the first open implementation of this framework, with a single generalist antibody editor trained on 1.66M Observed Antibody Space homolog pairs to propose homolog-like variants of a seed sequence, editing unseen leads zero-shot, without the per-family retraining original approaches require. Replicating this system from scratch exposes why open code is essential for generative biology: reconciling published edit distributions required reverse-engineering an undocumented rate-scaling hyperparameter that dictates realized mutation counts. Moreover, we show that published evaluation metrics are highly sensitive to reference sample size, frequently flipping method rankings. We release our full codebase, automated test suite, and configurations at: https://github.com/VisiumCH/editjumps

0.30