CS Paper Radar

Efficient Hardware Information-Flow Tracking for Pre-Silicon Security Testing

Yu-Wei Fan, Yuheng Yang, Christine Guo, SooHyuk Cho, Thomas Bourgeat, Mengjia Yan, Sharad Malik

cs.CR cs.LO ·submitted 2026-09-06 19:18 UTC · v1
code/data

Abstract

Register-Transfer Level (RTL) simulation is widely used to test hardware before it is fabricated. To allow testing for security related information flow properties, such as confidentiality and integrity, taint logic can be automatically added to the design to track how information flows through it. However, taint logic instrumented by the state-of-the-art, such as CellIFT, makes simulation-based testing prohibitively expensive: On our evaluation of Mega-BOOM (136K cells), it increases the instrumented design to 5.81x the original cell count and causes a 143.72x simulation slowdown. The taint logic could be simplified to improve simulation speed, but it will inevitably trade off its precision. This lightweight, imprecise taint logic will introduce false positives and may eventually result in even more overhead to check these false positives. This paper explores the research question of where precision is actually needed in the design to overcome the overhead of false positives. It presents CEGAR-T, a framework that automatically synthesizes taint logic that minimizes the taint-logic instrumentation overhead while guaranteeing no false positives (relative to the precise CellIFT baseline). We have implemented CEGAR-T and evaluated it on the safe instruction set problem for timing side-channel security across open-source RISC-V cores. Over all evaluated cores, CEGAR-T reduces both instrumentation and simulation overhead, in geometric-mean, from 5.64x to 1.42x and from 34.65x to 1.79x, respectively, without compromising the precision benefit of the CellIFT baseline.

Closest papers

Nearest neighbours by meaning across the whole index.

From FIPS to FPGA with LLM Agents: Measuring What Tests and Reviews Miss in Post-Quantum Cryptographic Hardware

cs.CR cs.AIcs.AR ·2026-11-19 ·Jungmin Park, Eunha Kim, Wooseop Kim, Seongjoon Cho, Byungho Cha
hot direction similarity 0.65
Abstract

As LLM agents increasingly generate RTL alongside the tests and reviews that validate it, self-generated evidence is a weak foundation for trustworthy hardware. We present our seven-stage verification-gated workflow, evolved during a post-quantum design port, in which a gate counts only if shown able to fail on negative controls and fault mutants, and reviewer agents audit work before commit. We then audit this evidence with tool-selected netlist mutants, flaw replays, and formal checks. The flow ported an ML-KEM-768/ML-DSA-65 accelerator to a 300 MHz Zynq UltraScale+ key-custody card: all six operations are byte-exact on the board, and it passes all 85 interface-applicable NIST ACVP cases (of 285) and 484 ML-DSA known answers. However, passing module tests overstate the verification strength. Across three RTL modules, existing simulation gates kill only 76% of 399 tool-selected netlist mutants; specification-derived tests guided by the survivors raise the fresh-draw decapsulation kill rate from 48% to 74%. In pre-registered single-model replays on flaws invisible to known-answer tests, undirected whole-design review catches two verifier flaws in only 3/6 and 1/6 sessions, whereas module-scoped review catches every known flaw in all 54 sessions. Even scoped review detects planted key-custody flaws in only 3/20 sessions, whereas formal checks (one added for the replay) flag every one. In this study, trustworthy agentic hardware needed author-independent mutants for test gates, module-level scoping for LLM review, and formal checks for custody invariants.

0.40

FreeSBee: A Constant-Time Compilation Pipeline

cs.CR ·2026-10-14 ·Julian Ganz, David Knothe, David Oswald, Sebastian Reiter, Thorben Schneider +1 more
similarity 0.64
Abstract · 7 pages; removed incorrect conference reference

Constant-time execution is an important security property, especially for IoT devices, that prevents the leakage of sensitive information over timing side-channels. However, achieving constant-time execution is very hard when going down to the cycle level, at least on realistic devices. A lot of research is concerned with producing tools that either determine whether code is constant-time or that ensure it is compiled into a constant-time binary, with various degrees of accuracy. In this work, we present and evaluate a full workflow for hardening against timing side-channels during compilation. It starts with taint analysis to determine the code locations that depend on sensitive information. These are then the object of automated control-flow transformations inside the compiler to seal possible timing side-channels. We evaluate our workflow in detail on a realistic application running on a RISC-V core using both static timing analysis and statistical methods. Even though we do not reach cycle-accurate constant-time execution, our statistical results suggest that our hardened binary is safe against timing attacks.

0.17

CHERI under Fault Injection: An Emulation-Based Security Evaluation of Capability Hardware Enhanced RISC Instructions

cs.CR cs.AR ·2026-11-15 ·Eva Sophia Schreyer
similarity 0.61
Abstract · Submitted to KTH Royal Institute on Technology as a Master Thesis

Memory-safety vulnerabilities continue to dominate real-world exploit chains despite decades of research into software mitigations. CHERI is a hardware architecture that enforces spatial and temporal memory safety by augmenting pointers with hardware-checked metadata, thus preventing software-based exploitation, but its threat model explicitly excludes fault injection. This thesis investigates whether targeted fault injection can undermine CHERI's memory-safety guarantees in a pure-capability CHERI-RISC-V environment. Two fault classes are considered: bit flips corrupting capability metadata, and fault-induced check skipping on capability store instructions. We implement fault injection primitives in a QEMU-based emulation environment, which enables deterministic, repeatable experiments without specialised hardware. With them, we demonstrate four attack scenarios: buffer overflows, control-flow hijacking, data-only attacks, and use-after-free. Each succeeds with one or two targeted faults (lower bounds under the emulation-based setting). Check skipping offers an alternative route to control-flow hijacking and data-only attacks, with a minimum of one fault. These results show that CHERI's guarantees depend on the physical integrity of capability metadata, the uninterrupted execution of metadata checks, and the integrity of the revocation bitmap: a single targeted fault can circumvent spatial safety, temporal safety, or control-flow integrity. CHERI still raises the cost of exploitation, since fault injection is a prerequisite for every attack and the sentry mechanism forces an attacker to supply a valid tagged capability or spend a second fault restoring the tag. Based on these findings, we propose mitigations: ECC-protected capability memory, capability field authentication codes, redundant execution of security-critical checks, and revocation bitmap integrity verification.

0.29

SoK: You Find What You Seek: Rethinking Oracles, Guidance, and Input Generation in Hardware Fuzzing

cs.CR cs.AR ·2026-09-23 ·G Abarajithan, Zhenghua Ma, Cristian Tirelli, Andres Meza, Francesco Restuccia +2 more
survey similarity 0.61
Abstract · 13 pages

Hardware fuzzing is an active area in security verification research, yet its industrial adoption remains in its early stages. This SoK examines which lessons from software fuzzing carry over to hardware and where unique approaches are needed. By analyzing 52 fuzzers across RTL/IP, CPU, NoC, and SoC designs, we introduce an analytical framework that frames verification as a bounded search. This search is defined by its objective, oracle, guidance, input generation, target abstraction, and budget. Consequently, a campaign only uncovers failures it can effectively reach, recognize, and prioritize before exhausting its resources. We distinguish two roles for hardware fuzzing: (1) augmenting constrained-random verification (CRV) via feedback-guided coverage and (2) directed adversarial testing based on threat models and security specifications. Through our framework, we identify what each campaign can observe and generate, providing a basis for assessing the evidence behind reported results. Our analysis suggests that mainstream adoption of hardware fuzzing will require reusable interfaces, target-specific verification assets, reproducible evaluations, and transparent reporting of cost and user effort.

0.09

Lessons from the Hardware Hacking Competitions: Verification Techniques, Findings, and Insights

cs.CR cs.ET ·2026-08-23 ·Sudipta Paria, Aritra Dasgupta, Raghul Saravanan, Jayanth Thangellamudi, Sai Manoj P D +1 more
similarity 0.61
Abstract · 11 pages, 5 figures, 9 tables

Hardware hacking competitions have emerged as practical platforms for evaluating security weaknesses in complex System-on-Chip (SoC) designs while promoting security-aware verification and tool development. This paper presents a systematic study of SoC security verification through open-box hardware hacking competitions, focusing on practical vulnerability analysis strategies, observed findings, and lessons for security-aware verification. We present a multi-strategy vulnerability analysis methodology, combining simulation-based verification, formal verification, lint analysis, Large Language Model (LLM)-assisted bug detection, and coverage-guided hybrid fuzzing. Representative vulnerability findings are analyzed to illustrate how different techniques expose complementary classes of security flaws, and we derive practical lessons for pre-silicon security verification. Finally, we discuss how competition benchmarks can support the reproducible evaluation of emerging hardware security techniques and guide future security-aware EDA research.

0.19

SecDMP: Provably Secure Data Memory-Dependent Prefetching (Extended Version)

cs.CR ·2026-10-27 ·Jens Sprengers, Marton Bognar, Lesly-Ann Daniel, Frank Piessens
top venuecode/data similarity 0.61
Abstract · This is the extended version of our paper accepted at NDSS 2027 and consists of 32 pages

Data memory-dependent prefetchers (DMPs) are a microarchitectural optimization recently introduced in mainstream desktop and server CPUs. Although DMPs offer performance improvements, they have been shown to enable side-channel leakage of secrets, even from constant-time code that has been hardened against Spectre attacks. Unfortunately, existing defenses either incur significant performance overhead or, as we show, fail to prevent all DMP leakage. In this work, we address this gap by designing a defense that is both secure and efficient. First, we propose a classification of DMP leakage, categorize existing and novel attacks, and analyze which leakage classes are mitigated by existing defenses. We validate this analysis empirically by implementing the first open-source DMPs on a RISC-V processor, showing that the only existing defense that aims to preserve DMP performance fails to protect against entire leakage classes. Next, we propose SecDMP, a provably secure and efficient hardware-based defense. SecDMP requires secrets to be marked in memory and ensures that DMPs never encode these secrets in the microarchitecture---without compromising performance for public data. We formally prove that SecDMP introduces no leakage beyond a baseline semantics without DMPs. Notably, when combined with speculative-execution defenses, SecDMP restores complete microarchitectural security for constant-time code. Finally, our empirical evaluation shows that SecDMP prevents all DMP leakage while incurring minimal performance overhead and hardware cost.

0.51

SILK: Closing the Time-of-Check-to-Time-of-Use Gap in RoT-Protected AI Systems

cs.CR cs.AR ·2026-08-26 ·Ruichen Qi, Xinting Jiang, Ema Dimitrova, Junyi Luo, Quan Cheng +1 more
similarity 0.61
Abstract

Root-of-trust (RoT) authentication verifies a DNN model at load time, but weights may subsequently traverse DRAM, DMA, interconnect, and prefetch paths before reaching the compute engine. Post-verification tampering along this path can therefore alter the weights actually consumed while leaving the authenticated model image unchanged, creating a time-of-check-to-time-of-use (TOCTOU) integrity gap. We present SILK (Streaming Inline Lightweight Keying), an in-place integrity mechanism that verifies the weight stream at the final pre-compute boundary. SILK repurposes quantized-weight LSBs as secret-keyed integrity bits and chains dependencies across weight bytes, so a local modification perturbs multiple integrity checks. A lightweight streaming checker recomputes these checks without separate authentication tags and uses commit gating to prevent unverified weights from reaching computation. Under a secure pseudorandom function (PRF), the forgery probability decreases exponentially with the number of affected checks, and measured miss rates closely track the analytical bound. SILK detects every stream-modifying instance in our functional attack suite. For INT8, it limits quality loss to at most 0.76 pp across evaluated CNNs and 0.17 perplexity across eight LLMs, while INT4 and MXFP4 provide a configurable security-quality tradeoff through check sparsity. On a Xilinx ZCU102, the synthesized reference pipelined implementation sustains 756 MB/s at only 1.00% of the equivalent area cost of a Caliptra 2.x RoT, while a configuration with a conservative per-attempt forgery bound of 2^-128 still sustains 678 MB/s at 6.15% of the RoT cost.

0.28

INTCC: A Framework for Interactive Confidential Computing

cs.CR ·2026-09-28 ·Qingzhe Bing, Kaiyuan Zhang, Yinqian Zhang
similarity 0.60
Abstract

Confidential computing leverages Trusted Execution Environments (TEEs) to ensure the confidentiality and integrity of data in use. However, TEEs rely on remote attestation to guarantee the integrity of their initial memory state. This model is fundamentally at odds with interactive development workflows. In scenarios like LLM fine-tuning and exploratory data analysis, data processors need human-in-the-loop capabilities, including dynamic code injection, intermediate state inspection, and hyperparameter tuning, all of which inherently violate the static, one-time integrity guarantees of traditional remote attestation. To reconcile this tension, we propose the interactive confidential computing paradigm, a system architecture enabling untrusted data processors to execute dynamic, non-deterministic operations within TEEs without compromising data confidentiality. Driven by the insight that inherently unmeasurable human interaction must be excluded from the Trusted Computing Base (TCB), we logically partition the TEE into an interactive controller and a verifiable runtime. To realize this paradigm, we present INTCC, a framework featuring three key mechanisms: (1) a proxy-based dispatch system to preserve the native development experience; (2) a fine-grained information flow control mechanism based on a security lattice to prevent data leakage; and (3) a privacy-preserving verifiable execution mechanism to guarantee the runtime compliance of dynamic workflows. We implement INTCC on AMD SEV-SNP using Confidential Containers and evaluate it across diverse real-world workloads. Our experiments demonstrate that INTCC effectively balances security and interactivity, incurring a practical overhead of less than 5% for LLM fine-tuning and under 17% for data analysis relative to baseline execution.

0.09