CS Paper Radar

MAC-I$^2$: Learned Metrics-Aware Covariance for Robust Visual-Inertial Fusion in Initialization and Calibration

Xiang Fei, Yuheng Qiu, Can Xu, Yutian Chen, Ruogu Li, Xingxing Zuo, Wenshan Wang, Sebastian Scherer

cs.RO ·submitted 2026-09-07 06:58 UTC · v1

Abstract

Visual-Inertial (VI) fusion is fundamental to accurate and robust state estimation, where camera and IMU measurements are combined according to their respective uncertainties. Existing methods, however, fuse the two modalities with predefined uncertainties, regardless of how reliable each is in the local context, and thus often struggle under challenging environments involving illumination changes, dynamic objects, and textureless regions. In this paper, we present MAC-I$^2$, which achieves robust VI fusion through learned metric-aware covariance for both modalities, so that vision and IMU compete on their own merits rather than relying on predefined uncertainties. Here, metrics-aware means that each predicted covariance faithfully reflects the actual magnitude of the corresponding measurement noise. On the visual side, we propagate learned feature-matching uncertainties into pose covariances for the fusion. On the inertial side, motivated by the observation that integration error accumulates sharply at the early stage and grows slowly afterward, we design a learned IMU model with a learnable initial covariance, and propose a dedicated fine-tuning strategy on a held-out training subset to enable the metrics-aware covariance on unseen sequences. As a showcase, we build a VI initialization and calibration system, since accurate and robust initialization and calibration are the prerequisite for any reliable VI system. Experiments on EuRoC, and VBR show that MAC-I$^2$ substantially outperforms existing methods: it achieves a 99.9% initialization success rate on EuRoC, reducing gravity and velocity errors by about 60% and 42% over the strongest baseline, and maintains 80% success rate on challenging VBR sequences where baseline methods such as VINS-Mono drop below 10%.

Closest papers

Nearest neighbours by meaning across the whole index.

When Do Learned Priors Help Visual Inertial Estimation? A Controlled Study of Prior Integration, Calibration, Initialization, and Backend Consistency

cs.RO cs.CV ·2026-09-12 ·Jinchang Zhang, Guoyu Lu
similarity 0.76
Abstract

Learned components are increasingly integrated into geometric visual--inertial estimators to provide motion, depth, bias, uncertainty, or confidence cues. Yet it remains unclear whether gains arise from useful learned priors or from changes in the backend, calibration, initialization, temporal association, or evaluation gauge. We present a controlled framework for learning-augmented visual--inertial estimation that separates fusion gain from the incremental value of a learned prior and evaluates four evidence layers: local motion consistency, global trajectory accuracy, physical-state correctness, and numerical consistency. We instantiate the framework with a MonoViT-based monocular motion prior added as a local relative-motion factor to an unchanged VINS backend. We compare Original VINS and learned-prior VINS under matched sensor streams, timestamps, initialization, frontend/backend settings, and camera--IMU extrinsics, while probing calibration, initialization, state coupling, scale, bundle adjustment, and loop closure. On KITTI, with fixed reference extrinsics, translation APE RMSE is 31.4 m for Original VINS and 31.8 m with the learned prior. Across four recordings, the prior changes mean APE by only -0.2%, while a five-times-higher weight worsens it by 8.2%. Online extrinsic updates increase mean APE by 45.7% and 52.1%, respectively, while mean RPE changes by less than 2%. These results show that fusion performance alone cannot establish the value of learned priors. Reliable evaluation requires same-backend controls and joint analysis of prior compatibility, calibration, initialization, global drift, physical-state error, and backend consistency.

0.20

LBDU-VIO: Learned Bias Dynamics and Uncertainty for Visual-Inertial Odometry with Unreliable Vision

cs.RO ·2026-09-30 ·Qizhi Guo, Junning Lyu, Defu Lin, Shaoming He
similarity 0.69
Abstract · 12 pages, 8 figures

Visual-inertial odometry (VIO) for aerial robots relies on high rate inertial measurement unit (IMU) propagation between visual updates. However, conventional multi state constraint Kalman filters (MSCKFs) use random walk bias assumptions and fixed noise parameters, which can limit robustness when visual information is unreliable. To address this problem, we propose LBDU-VIO, a learning-augmented MSCKF with learned continuous time bias dynamics and an IMU uncertainty model. A neural ordinary differential equation (ODE) models continuous time bias dynamics to propagate the filter's bias states, replacing their random walk model. The IMU uncertainty model predicts motion adaptive measurement noise covariances for covariance propagation. Both models are trained with pose supervision without direct labels. Experiments on real world EuRoC and TUM-VI benchmarks show lower errors than representative visual-inertial baselines, including a 25.1% reduction in mean relative position error compared with S-MSCKF on EuRoC sequences with 10s visual outage.

0.12

Smart Fusion for Adaptive Visual-IMU Weighting in cuVSLAM Sparse Bundle Adjustment

cs.RO ·2026-10-14 ·Wonju Lee, Dara Molloy, Abhilash Nand Kumar, Onias Castelo, Petar Trslic +3 more
similarity 0.68
Abstract

In cuVSLAM, visual and inertial measurement unit (IMU) residuals are fused in sparse bundle adjustment (SBA) with a weighting fixed by pre-calibrated noise covariances, leaving no mechanism to adapt the visual-inertial balance at runtime. We introduce a scalar $α\geq1$ that upscales the visual information matrix relative to the IMU preintegration constraint. Across the candidate set $\{1.0,2.0,5.0,10.0,20.0\}$, the resulting trajectories form two empirical performance regimes. The IMU-TRUST regime contains $α\in\{1,2\}$ near the calibrated baseline, while the VISION-TRUST regime contains $α\in\{10,20\}$. The intermediate value $α=5$ is treated as a transition case. Differences within each regime are small relative to those observed between the regimes. This structure motivates reducing $α$-selection to a binary decision. We train a lightweight Visual Quality Estimator (VQE), implemented as a multilayer perceptron with 914 trainable parameters. It maps a 10-dimensional visual quality feature vector assembled from statistics already maintained by the tracker to a per-SBA regime prediction. The proposed method reduces mean RMSE APE by $27.7\%$ and by $14.9\%$ under leave-one-out cross-validation (LOOCV) on EuRoC MAV and TUM-VI Room, respectively.

0.17

DAPEVO: Deep Adaptive Patch Frame-Event Visual Odometry

cs.CV ·2026-09-25 ·Luca Gandolfi, Simone Nascivera, Roberto Pellerito, Rong Zou, Chiara Plizzari +1 more
similarity 0.66
Abstract

Visual odometry is essential for autonomous navigation in GPS-denied environments, yet RGB-based methods remain vulnerable to motion blur, challenging illumination, and dropped frames. Event cameras complement conventional cameras with high temporal resolution and dynamic range, but their asynchronous measurements complicate reliable correspondence estimation. We present DAPEVO, a learned visual odometry system that estimates image and event correspondences independently at shared patch locations and fuses their correlation evidence before motion refinement. Each tracked patch maintains image and event descriptors, and a learned scalar gate combines modality-specific correlation embeddings for each patch--frame edge before a shared recurrent refinement and bundle-adjustment update. DAPEVO also supports event-only observations, enabling continued tracking when RGB frames are sparse or unavailable, while modality-aware keyframe culling preserves scarce frame constraints. On UZH-FPV, when retaining only one in six RGB frames, DAPEVO's mean absolute trajectory error (ATE) increases by only 36%, from 1.00 to 1.36m, whereas the ATE of DPVO and RAMP-VO rises by factors of $3.7\times$ and $3.1\times$, respectively. On TartanEvent, DAPEVO similarly remains below 1m ATE at 3Hz RGB input, while DPVO and RAMP-VO exceed 9m. Under degraded RGB input on TartanEvent, DAPEVO achieves an ATE of 0.60m, compared with more than 4m for both DPVO and RAMP-VO, while also outperforming event-only DEVO at 0.87m.

0.16

NIF-VIO: Visual--Inertial Odometry Across Inertial and Non-Inertial Reference Frames

cs.RO ·2026-11-10 ·Zichao Shu, Lijun Li, Zhuochen Li, Zetao Chen, Jianyu Wang
similarity 0.66
Abstract

Conventional visual--inertial odometry (VIO) assumes that observations from cameras and an inertial measurement unit (IMU) are jointly consistent in an inertial reference frame. However, this assumption breaks down under non-inertial conditions. Inside accelerating or rotating carriers, visual observations of the interior reflect carrier-relative motion, while IMU measurements contain additional carrier-induced components, which can compromise conventional fusion. We therefore present NIF-VIO for localization relative to the local environment across inertial and non-inertial reference frames. It adapts visual--inertial fusion based on measurement consistency. As inertial conditions change, early constraint isolation is combined with local reoptimization to limit error propagation before inconsistency confirmation and repair the affected local geometry. Under non-inertial conditions, a compact model with temporally shared parameters is introduced to account for carrier motion while preserving inertial information that complements visual constraints. Experiments on public benchmarks and a self-collected dataset demonstrate that NIF-VIO achieves competitive performance under inertial conditions and improved localization accuracy and availability under non-inertial conditions.

0.24

Tight Learned Event-Inertial Odometry (TLEIO): a Transformer-Based Architecture for End-to-End Motion from Event Streams

cs.CV ·2026-10-23 ·Matteo Cascone, David Jensen, Alessandro Pirini, Angelo Stefanini, Pietro Venè +2 more
benchmark similarity 0.64
Abstract · 14 pages

Event cameras provide microsecond temporal resolution, high dynamic range, and sparse asynchronous measurements, making them compelling for odometry under fast motion and challenging illumination. Yet, accurate event-based state estimation remains difficult: existing systems often use events as a complement to frames or rely on feature tracking, correspondence search, and optimization-heavy backends, limiting the efficiency promised by event sensing. We introduce Tight Learned Event-Inertial Odometry (TLEIO), a compact filter-based pipeline that learns short-window relative motion directly from voxelized event streams and tightly fuses the resulting constraints with IMU propagation. Its learned front-end, EventsFormer, predicts local displacements and per-axis uncertainty from event voxels in a single forward pass, while a stochastic-cloning EKF fuses these overlapping predictions with IMU propagation, producing metric trajectories without explicit feature tracks and pose optimization at inference time. The network is trained directly from pose displacements, without requiring event-flow labels. We evaluate TLEIO on the TartanAir/TartanEvent benchmark and on real DAVIS240c sequences. On TartanAir, TLEIO reduces average ATE from 2.26 m to 1.10 m over the IMU-only TLIO baseline, while achieving up to 48.9% lower runtime than optimization-based event odometry methods.

0.11

AnyVIO: Feed-Forward Streaming Visual-Inertial Odometry Across Platforms

eess.IV ·2026-11-19 ·Omoruyi Atekha, Marcus Greiff, Ray Zhang, Luca Carlone
similarity 0.64
Abstract · 11 pages

Geometric foundation models (GFMs) estimate camera mo- tion and scene structure from images without requiring ex- pert parameter tuning, but either lack metric scale or rely on learned priors to infer scale, which is unobservable from monocular images alone. Inertial sensing offers a way to observe metric scale, but existing methods add inertial in- formation through a filter or factor graph, which reintro- duces bespoke parameter tuning and optimization costs that can grow with the trajectory. To bridge this gap, we present AnyVIO, a real-time, feed-forward streaming model for monocular visual-inertial odometry (VIO), which combines a streaming GFM with an inertial foundation model (IFM). Both the GFM and IFM predict the metric motion between consecutive frames, and a lightweight learned fusion head quantifies the reliability of each estimate and blends them in a single forward pass. Across nine datasets recorded from cars, legged and ground robots, and handheld and head- mounted devices, AnyVIO reduces the metric position error of its visual model by 36% while publishing each pose esti- mate 70 ms after an image is received. We further deploy AnyVIO onboard two real vehicles at up to 140 km/h, where it remains accurate in poor lighting and heavy dust.

0.20

Scalix: Uncertainty-Aware Scale-Consistent Monocular SLAM

cs.RO ·2026-08-18 ·Sebastian Barbas Laina, Tianyi Zhang, Panagiotis Petropoulakis, Simon Schaefer, Simon Boche +3 more
similarity 0.64
Abstract · 8 pages, 5 figures and 3 tables

Cameras are ubiquitous sensors in robotics due to their compact form factor and the perceptual richness captured through visual information. Monocular SLAM enables robots to understand the environment with a minimum setup, however, it inherently suffers from scale ambiguity. A common solution is to provide multi-modal sensor configurations, such as visual-inertial systems, where scale is observable unless the robot navigates under a constant-velocity motion, a common scenario in mobile robotics. With the advent of deep-learning, geometric foundation models have been used to address this problem, but the depths maps are often noisy and scale-inconsistent across frames. In this paper, we propose Scalix, a real-time monocular SLAM framework that achieves metric-scale state estimation by integrating learned depth cues into a probabilistic factor-graph formulation. By augmenting existing monocular depth models with both per-pixel depth uncertainty and per-frame scale uncertainty, Scalix treats scale predictions as independent measurements within its optimization, leading to improved scale consistency through multi-view data associations. Experiments in large-scale outdoor and indoor environments demonstrate state-of-the-art performance on both metric and up-to-scale benchmarks while maintaining real-time operation and generalization.

0.40