CS Paper Radar

SynthGait-19K: A Physically Grounded Synthetic Video Dataset for Gait Parameter Estimation

Soroush Mehraban, Xin Lei Lin, Vida Adeli, Majid Mirmehdi, Amirhossein Dadashzadeh, Clint Hansen, Andrea Iaboni, Babak Taati

cs.CV ·submitted 2026-09-08 01:36 UTC · v1
benchmarkcode/data

Abstract

Accurate estimation of clinically meaningful gait parameters from monocular video is important for scalable mobility assessment, yet progress is limited by the small scale, restricted viewpoints, and limited visual diversity of existing datasets. We introduce SynthGait-19k, a physically grounded synthetic video dataset containing 19,272 walking videos derived from 6,427 MoCap sequences across 437 subjects, with paired SMPL motion and annotations for six gait parameters. To construct the dataset, we develop Gait2Vid, which unifies heterogeneous MoCap recordings through SMPL and synthesizes diverse RGB walking videos under controllable viewpoints and scene appearances. We assess the generated videos for consistency with their conditioning gait kinematics and validate extracted gait events against force-platform measurements. Using SynthGait-19K, we benchmark direct RGB, pose-based, biomechanical, and human-mesh-recovery approaches and analyze viewpoint, training-data scale, and synthetic-to-real domain shift. We also introduce GaitXFormer as a direct RGB reference model for estimating gait parameters. Synthetic supervision transfers effectively to real videos across both GaitXFormer and a pose-based architecture, demonstrating utility across different representations. We further find that spatial gait parameters are more sensitive to visual domain shift and that improved HMR reconstruction alone does not necessarily translate to improved downstream gait estimation.

Comment
Project Page: https://soroushmehraban.github.io/SynthGait-19k/

Closest papers

Nearest neighbours by meaning across the whole index.

Attribute-Centric Vision-Language Alignment for Fine-Grained Gait Understanding

cs.CV ·2026-10-10 ·Saihui Hou, Chenye Wang, Wenpeng Lang, Qiannan Guo, Zhengxiang Lan +3 more
benchmark similarity 0.75
Abstract

Walking sequences reveal human-interpretable attributes related to body structure, posture, and motion. Gait attribute recognition provides a concrete route to fine-grained gait understanding by predicting these attributes. However, existing benchmarks provide limited fine-grained annotations, while classifier-based gait attribute recognition methods typically represent candidate classes through learned output weights rather than directly matching visual evidence with textual class representations. To address the annotation gap, we present RA-GAR, a large-scale, richly annotated multimodal benchmark for gait attribute recognition, containing 1,001 subjects, 242,729 walking sequences, and annotations for 15 static and motion gait attributes. We further propose Gait-VL, an attribute-centric vision-language alignment framework that recognizes gait attributes by matching attribute-specific multi-frame visual evidence with textual class prototypes. On the visual side, attribute-specific learnable queries aggregate RGB features across spatial locations and frames into per-attribute visual embeddings. On the language side, diverse descriptions expanded by a large language model are combined with context about relevant body regions to construct textual class prototypes. Beyond attribute recognition, we evaluate the transferability of the attribute-pretrained visual encoder by using it to replace generic upstream large vision models in identityoriented gait recognition pipelines; attribute pre-training uses no identity classification or metric-learning objectives. Experiments demonstrate state-of-the-art attribute recognition performance on RA-GAR and consistent improvements in downstream identity recognition across multiple pipelines and benchmarks, supporting the effectiveness and transferability of attribute-centric gait representation learning.

0.12

3rd Place Solution to Human Motion Challenges in Real-World and Clinical Settings (MoCha) @ECCV2026: Language-Aligned Motion Representations for Domain-Generalizable UPDRS-Gait Severity Estimation

cs.CV ·2026-09-09 ·Soojie Kim, Muhammad Munsif, Minkyung Kim, Seungryul Baek
publishedbenchmark similarity 0.74
Abstract · 3rd Place Solution to the MoCha 2026 Challenge at ECCV 2026

In this work, we introduce language-aligned motion representations for domain-generalizable UPDRS-Gait severity estimation, aiming to learn semantically structured motion features that generalize across heterogeneous clinical domains. We first learn motion representations using a Bi-GRU backbone that captures the temporal dynamics of SMPL sequences. Prior to model training, motion captions are generated offline using Qwen2.5-7B-Instruct. The backbone is then trained with both classification and text-alignment objectives to learn discriminative and semantically structured motion representations while accounting for the class imbalance present in the training data. We subsequently adapt the learned backbone independently to each source domain so that the model can capture domain-specific motion characteristics. The resulting source-specific models are then merged at the parameter level to consolidate complementary knowledge across source domains into a single domain-generalized model. To further mitigate class imbalance, we perform GPT-5.5-based pseudo labeling, and our final merged models for each site do not use any class-prior correction during inference. The resulting model is evaluated under the unseen-site setting of the MoCha Challenge, using Macro F1 as the primary evaluation metric. Our method achieves a macro-F1 of 0.57 on the hidden test set with only 637K active parameters at inference, ranking 3rd among 58 leaderboard entries in the MoCha 2026 Challenge. The challenge attracted 1,669 submissions from 112 participants and offered monetary prizes sponsored by Machine Medicine Technologies.

0.22

GaitFM: A Cross-Modal Foundation Model for Wearable Gait Assessment

cs.CV ·2026-11-01 ·Yize Cai, Zhiqing Hong
similarity 0.72
Abstract · 18 pages, 4 figures

Gait assessment supports the diagnosis, monitoring, and prognosis of diverse movement-related conditions, such as neurological and musculoskeletal disorders. Recent advances in deep learning using everyday wearable inertial measurement units (IMUs) offer an accessible and low-cost approach to automated gait assessment. However, IMU measurements vary substantially across individuals, body locations, and device configurations, while existing deep learning models are typically developed using small, homogeneous datasets for specific clinical tasks, limiting their robustness and generalizability in diverse real-world contexts. Here we present GaitFM, a cross-modal foundation model for gait assessment using IMU sensors. GaitFM improves the generalizability of gait assessment by transferring knowledge from large vision models and pretraining on unlabeled IMU sensor data. We pretrain GaitFM on a large curated dataset comprising about 4,000 participants and 1.23 million gait windows across diverse clinical and daily conditions, sensor modalities, and body locations. GaitFM demonstrates strong performance across 18 gait-related tasks, including 3 gait parameter estimation tasks, 14 disease and gait abnormality detection tasks, and 1 clinical outcome prediction task. Furthermore, GaitFM generalizes across different sensor configurations and body locations, including those commonly used in clinical settings and everyday wearable devices. These findings demonstrate the effectiveness of transferring visual knowledge in improving sensor-based gait assessment performance, offering a new promising pathway for addressing data scarcity in the sensor and medical domains.

0.13

GaitVista: Reliability-Aware AI Measurement toward Accessible Longitudinal Gait Assessment

cs.AI ·2026-09-18 ·Nethmi Jayasinghe, Mihir Parashar, Amit Ranjan Trivedi
similarity 0.71
Abstract

Tracking recovery of walking function requires detecting meaningful gait change across rehabilitation sessions, yet objective 3D measurement remains confined to specialized motion-capture laboratories. Small camera sets and body-worn inertial sensors broaden access, but reliability varies across joints and time, allowing sensing failures to masquerade as patient change. We present \textsc{GaitVista}, a reliability-aware measurement layer whose lightweight gate assigns joint- and frame-specific visual contributions using camera coverage, local visual quality, cross-modal disagreement, and root-motion continuity, and exposes them for inspection. Across seven clean and degraded sensing conditions on TotalCapture, \textsc{GaitVista} reduces average full-body and lower-body error by \textbf{27.7\%} and \textbf{27.8\%}, attains the lowest worst-condition error among fusion methods, and reduces the gap to a joint-frame oracle from $2.76$--$5.33$~cm for condition-blind baselines to $1.11$~cm. On MoVi with image-derived keypoints, it is the only deployable fusion method to improve over both unimodal streams, reducing marker-supported error by \textbf{6.4\%} relative to the strongest learned fusion baseline. On TotalCapture, it improves bilateral knee-flexion waveform accuracy by \textbf{18.9\%}. Raw inertial measurements from five TotalCapture participants show location- and time-varying magnetic disturbance, supporting the design's reliability premise. Both benchmarks contain neurologically healthy participants in controlled settings and retain participant-specific IMU calibration; we therefore report progress toward accessible gait assessment, not validated clinical deployment.

0.23

MMGait: Benchmarking and Unifying Gait Recognition across Heterogeneous Modalities

cs.CV ·2026-09-10 ·Saihui Hou, Chenye Wang, Qingyuan Cai, Aoqi Li, Yongzhen Huang
benchmark similarity 0.71
Abstract · 21 pages, 6 figures

Gait recognition is commonly studied using RGB videos or their derived silhouettes and poses. Yet human walking produces heterogeneous photometric, geometric, and motion cues that cannot be systematically examined with RGB-centered benchmarks. We present MMGait, a large-scale multi-sensor benchmark that brings visible, infrared, depth, LiDAR, and radar observations into sequence-level correspondence. It provides diverse modalities spanning appearance, contours, geometry, motion, and body structure. Under a shared impostor-augmented protocol, we evaluate single-modal recognition, cross-modal recognition via directed retrieval, and multi-modal recognition using task-specific experts. Across settings, modality rankings vary with probe conditions, cross-modal alignment remains difficult, and fusion often provides complementary gains. This analysis exposes a scalability problem: individual modalities, modality pairs, and fusion configurations are typically handled by separately trained experts. We formulate Omni-Modal Gait Recognition, which unifies single-modal, cross-modal, and multi-modal recognition within a shared identity space. OmniGait++ uses modality-specific front ends followed by a shared identity encoder to preserve modality-dependent cues while learning comparable identity descriptors. An anchor-guided fusion module aggregates modality subsets of varying size without frame-level synchronization. A jointly trained checkpoint covers all three recognition settings and accommodates modality subsets of different compositions and cardinalities. Experiments show OmniGait++ remains competitive with task-specific experts in many shared settings and extends to higher-cardinality fusion unavailable to fixed-pair models. The results establish MMGait as a common testbed for heterogeneous gait sensing and demonstrate the feasibility of unified recognition under varying modality availability.

0.30

A Plug-and-Play 2D Motion Interface for Real-World Motion Language Models

cs.CV ·2026-08-17 ·Kaname Yokoyama, Norimichi Ukita
top venuecode/data similarity 0.70
Abstract · Accepted to HCMIW at ECCV 2026 (Oral Presentation). Code and demo: https://github.com/irajisamurai/2D-Motion-Interface

Motion Language Models (MoLMs) typically understand human motions by tokenizing 3D motion and processing the resulting tokens using a language model. However, obtaining accurate 3D motions from monocular videos is challenging, limiting their real-world applicability. To address this issue, we introduce a plug-and-play 2D Motion Interface that enables 3D-pretrained MoLMs to accept 2D motion inputs without modifying or fine-tuning the original models. Experiments on public datasets show that our method achieves performance comparable to 3D motion inputs across multiple MoLMs and outperforms training MoLMs from scratch on 2D motions. We further construct a monocular real-world video motion evaluation dataset and introduce a real-video adapter, demonstrating the usefulness of 2D motions over 3D motions under the evaluated monocular pose-estimation setting. These results suggest that 2D motion provides a practical interface for deploying MoLMs in real-world motion understanding settings. Code is available at https://github.com/irajisamurai/2D-Motion-Interface.

0.73

HiPHI: A Large-Scale Benchmark for High-Precision Human Motion and Object-Interaction

cs.RO cs.AI ·2026-08-17 ·Jiahao Ji, Ji Ma, Runhan Zhang, Runyi Yu, Wenjia Wang +10 more
publishedbenchmarkcode/datahighly cited similarity 0.69
Abstract · Accepted at CoRL 2026. Project page: https://noitom-robotics.github.io/hiphi/

Humanoid intelligence requires learning over an extremely diverse space of whole-body motions and physically grounded interactions. However, existing embodied datasets remain fundamentally limited: internet-scale video data lack precise physical states and interaction grounding, while laboratory motion datasets provide high fidelity but only narrow behavioral coverage. This mismatch creates a critical bottleneck for scalable humanoid policy learning. We present HiPHI, a 600+ hour scale high-fidelity whole-body human motion dataset designed to systematically maximize coverage of the human motion and interaction manifold. HiPHI is theoretically guided by FrameNet, a linguistic framework organizing human primitives. Created using an optical motion capture pipeline, HiPHI provides sub-millimeter spatial marker tracking accuracy for full-body human motion and mesh-level object trajectories. We further introduce a benchmark suite evaluating motion-space diversity, interaction grounding, object consistency, and physical AI applications. Our analyses demonstrate that HiPHI significantly expands motion coverage compared to existing motion datasets while maintaining high-fidelity interaction quality, and establishes a scalable data foundation for training, evaluating, and generalizing humanoid policies in real-world embodied tasks, where similar extensions are also applicable to motion prior models in computer graphics. Project page: https://noitom-robotics.github.io/hiphi/

0.59

On the Learnability of Footwear Robustness: Footstep Recognition Under Unseen Conditions

cs.CV eess.SP ·2026-11-03 ·Robyn Larracy, Erik Scheme
similarity 0.69
Abstract · 13 pages (+2 pages supplementary), 7 figures

Footstep patterns, captured using pressure or force-sensitive walkways during natural walking, offer a convenient and passive approach to biometric recognition. However, footwear variability poses a major challenge to practical deployment, as it impacts both the foot-sensor interface and the user's underlying gait mechanics. This study considers the particularly difficult scenario where users enroll under one fixed footwear condition but must later be recognized in arbitrary, unseen footwear. Using the StepUP-P150 dataset, we show that footwear-induced shift, while substantial and heterogeneous across individuals, contains shared structure that can be learned from a training population and transferred, zero-shot, to previously unseen users and footwear styles. We do this using BiStepNet, a novel architecture that decomposes spatial and temporal identity cues into independently trainable streams and outperforms compact 3D spatiotemporal baselines for cross-footwear recognition. We demonstrate that cross-footwear recognition performance scales systematically with the volume and diversity of footwear representation in the training set, with gains transferring to footwear styles not directly observed during training. Moreover, we show that auxiliary gait datasets with only partial modality overlap (incorporated through the architecture's decomposed design) can be leveraged to further improve robustness to unseen footwear conditions.

0.18