CS Paper Radar

Structured Multi-Level-Set Inversion for 3-D Electromagnetic Inverse Scattering

Yutong Du, Zicheng Liu, Bo Qi, Yali Zong, Xin Li, Peixian Han

cs.LG physics.comp-ph ·submitted 2026-09-08 11:30 UTC · v3

Abstract

Many dielectric targets encountered in 3-D electromagnetic inverse scattering exhibit piecewise-homogeneous material distributions, which provide useful structural information for inversion. To exploit this property, this paper proposes a structured multi-level-set inversion (SMLSI) method within a physics-driven neural network (PDNN) framework. Instead of directly parameterizing the contrast distribution, SMLSI represents it in terms of object support and material distribution. Multiple level-sets are mapped to soft-support functions and combined through a soft-union operation to construct the object support. The normalized contributions of these soft-support functions, together with trainable complex relative permittivities, determine the material distribution within the support. The level-set residuals are parameterized by a coordinate-based neural network, and the trainable parameters are optimized from scattered field data. Structure-aware regularization terms are introduced to promote binary object support and spatially coherent material regions while reducing material mixing and redundant activation of level-set supports. Adaptive regularization weighting is further employed to reduce the dependence on manual parameter tuning. Numerical experiments demonstrate that SMLSI improves reconstruction accuracy over direct contrast parameterization and enables the recovery of irregular 3-D geometries, closely spaced objects, and multiple material regions. Compared with CSI and $L_{2/3}$-FBE-WCIE, SMLSI achieves more accurate reconstructions on representative synthetic targets. Experimental validation using 3-D Fresnel data further demonstrates its applicability to measured scattering data.

Closest papers

Nearest neighbours by meaning across the whole index.

Coordinate-Residual Physics-Driven Neural Network for Inverse Scattering Imaging

cs.LG physics.comp-phphysics.app-ph ·2026-08-10 ·Yutong Du, Zicheng Liu, Bo Qi, Yali Zong, Peixian Han
similarity 0.75
Abstract

Electromagnetic inverse scattering is a nonlinear and ill-posed computational imaging problem, where accurate reconstruction is challenging due to measurement limitations, noise, and high computational costs, especially for 3-D imaging. Although physics-driven neural networks (PDNNs) reduce the dependence on labeled training data, existing accelerated PDNN frameworks often rely on preliminary reconstruction-based region selection, which may introduce instability when the selected region is inaccurate. In this paper, a coordinate-residual physics-driven neural network (CRPDNN) is proposed for 3-D electromagnetic inverse scattering. CRPDNN represents the unknown complex contrast distribution using normalized spatial coordinates and a residual convolutional network, whose parameters are optimized by enforcing consistency between the measured and model-predicted scattered fields. Unlike existing subregion-accelerated PDNN approaches, CRPDNN does not require a preliminary reconstruction, thereby avoiding dependence on its accuracy. For the reported noise-free 3-D synthetic cases, CRPDNN achieves an average relative error of 2.10\%, compared with 7.97\% for CSI and 3.99\% for $L_{2/3}$-FBE-WCIE, while providing approximately 5.5- and 12.1-fold speedups over the two baselines, respectively. Additional 2-D comparisons further demonstrate its stability and computational efficiency relative to existing PDNN frameworks. CRPDNN also maintains reliable reconstruction performance under noisy measurements, and the 3-D Fresnel experiments further indicate its potential for practical imaging applications.

0.04

Inductively Scalable, Single-Step Neural Surrogates for Wave-Scattering Inverse Problems

cs.AI physics.optics ·2026-08-18 ·Charles Dove, Laura Waller
similarity 0.61
Abstract

Neural network surrogates are an emerging alternative to traditional electromagnetic wave simulators like finite-difference time-domain (FDTD); their goal is to replace rigorous physical simulations with pre-trained neural networks that solve wave-scattering forward and inverse problems orders of magnitude faster. However, nonrecurrent, single-step surrogates have scaled only to a few tens of simulation variables. Here, we show that this barrier can be overcome by dynamically generating salient training examples during training, rather than randomly sampling the large space of possible examples. We introduce an algorithm that runs in parallel with surrogate training, using gradient ascent to search refractive-index and source configurations for cases where the surrogate disagrees with a full-wave ground-truth simulator. We also use source and ground-truth normalization with an evolving replay dataset to stabilize and accelerate learning. Using this approach, we train a fast, single-step surrogate for two-dimensional wave scattering with up to 41,772 controllable variables, including dense, freely configurable grids of refractive indices and complex-valued sources. The resulting neural surrogate is robustly accurate across diverse structured and unstructured examples and generalizes inductively to larger domains, reaching over 3 million controllable variables without retraining, a $73.8\times$ increase. We demonstrate the surrogate on large-scale forward simulations and inverse design of freeform beam splitters and gradient-index (GRIN) lenses up to 98 wavelengths wide, showing comparable or better performance than FDTD-based designs, with speedups from $1.29\times$ to $26.5\times$. These results demonstrate a practical path toward fast, robustly accurate, inductively scalable neural simulators for photonic inverse design and other wave-scattering inverse problems.

0.24

Unrolled RF Holographic Imaging: Structured Sparsity and Low-Rank EM Model Adaptation

eess.SP ·2026-08-23 ·Federica Fieramosca, Alexander Paulus, Richard Oliveira, Stefano Savazzi
similarity 0.58
Abstract · submitted for possible publication to IEEE

Radio-Frequency (RF) holographic imaging reconstructs a volumetric map of the permittivity contrast from phase-coherent samples of the scattered electromagnetic (EM) field. The resulting inverse problem is severely ill-posed, as the receivers are orders of magnitude fewer than the unknown 3D volume elements (voxels). It is classically regularized by sparsity-promoting solvers such as the Iterative Shrinkage-Thresholding Algorithm (ISTA). Two assumptions limit these solvers: the L1 penalty is spatially uniform, and the EM forward model is typically approximated as a linear operator. This paper revisits the problem through algorithm unrolling, in which the solver iterations become the layers of a compact trainable network that preserves the EM forward model and learns only a few interpretable parameters from limited data. Building on the Learned ISTA (LISTA), a Weighted LISTA (W-LISTA) is first proposed, which learns a spatially-varying L1 regularization, steering the sparsity prior towards target shapes consistent with the deployment. Second, the Low-Rank Weighted LISTA (LoRaW-LISTA) applies a low-rank adaptation (LoRa) of the holographic operator to compensate for model mismatches from linearized EM approximations. Both methods are validated on full-wave EM simulations and on a 2.45GHz indoor measurement campaign with human-body phantoms. Combining the spatially-varying regularization with the low-rank adaptation of the EM model improves the signal-to-clutter ratio by about 70% over the ISTA and LISTA baselines, recovering structural details where classical iterative solvers fail. Inference takes less than 30s to reconstruct 1m^3 of scene on conventional GPUs. The proposed tools are rapidly adaptable building blocks for the sensing layer of emerging smart radio environments.

0.14

Learning the Missing Derivative: Neural Multiple-Scattering Operators for Inverse Volume Rendering

cs.CV ·2026-11-12 ·Sipeng Chen, Shibo Li
hot direction similarity 0.56
Abstract · 22 pages, 11 figures, 18 tables

Reconstructing optically thick media from photographs requires modeling multiple scattering and its response to changes in extinction. Frozen-source tomography discards this derivative; differentiable path tracing estimates it through expensive, noisy sampling. We instead predict the multiple-scattering field with a neural operator and differentiate through it during inverse rendering, while computing transmittance and single scattering directly. A further challenge arises during optimization: an operator that predicts the field accurately on held-out media can still produce poor derivatives at the density states visited by the optimizer. We address this by fine-tuning on states generated during inversions driven by the operator, using Monte Carlo scattering-field supervision. On held-out optically thick clouds, our method improves relighting over frozen-source tomography at equal time and outperforms differentiable path tracing given substantially more time. Training on inversion trajectories also improves derivative alignment at visited states and reduces optimization drift.

0.30

Neural network scaling and generalization for 3D strain fields in heterogeneous materials

cs.CE physics.comp-ph ·2026-11-10 ·Lucas Fourel, Paul Devianne, Marine Debouvry, Tristan Destruhaut, Russell Gunn +3 more
similarity 0.56
Abstract

Computational homogenization and coupled multiscale simulations of heterogeneous materials require repeated solution of mechanical fields on Representative Volume Elements, which becomes prohibitively expensive for high-resolution three-dimensional microstructures. Machine-learning surrogates can accelerate these computations, yet most existing approaches predict fields for fixed macroscopic loadings and provide limited guidance on how to scale network architectures for high-resolution 3D tensor-field prediction. This work presents a U-Net surrogate trained to predict the full 36-component strain localization tensor field in voxelized concrete mesostructures at resolutions up to $256^3$. Training localization tensors are generated with an FFT-based linear elastic solver, and an extensive hyperparameter optimization is performed to derive scaling rules and an accuracy-speed trade-off analysis. The results show that only network width and depth need to be scaled with problem complexity, while several conventional U-Net design choices, such as doubling channels after downsampling, are suboptimal for this problem. The final neural network achieves a Mean Absolute Error of 1.118% on both the validation and the held-out test sets, and an inference speedup of approximately 8.7x over the FFT-based solver on an Nvidia H100 GPU. Generalization experiments reveal transfer across aggregate volume fractions and highlight the importance of training on diverse morphologies. To safeguard reliability, a Maximum Mean Discrepancy metric computed on internal feature maps is proposed for detecting out-of-distribution microstructures without costly reference computations.

0.37

ScaGNN: a Graph Neural Network for Multiple Scattering Simulations

cs.LG ·2026-09-29 ·Rémi Marsal, Stéphanie Chaillat, Alexandre Chapoutot
benchmarkcode/data similarity 0.55
Abstract

The boundary element method (BEM) provides an efficient numerical framework for solving multiple scattering problems in unbounded homogeneous domains. By restricting the discretization to the domain boundaries, it substantially reduces computational complexity. The procedure first consists in determining the solution trace on the boundaries of the domain by solving a boundary integral equation. Then, the volumetric solution can be recovered at low computational cost using a boundary integral representation. As the first step of the BEM represents the main computational bottleneck, we present ScaGNN, a learning-based approach designed to approximate the solution trace. It relies on a graph neural network architecture that incorporates a dynamic adaptive edge sampling mechanism for selecting the most relevant interactions to model. Guided by intermediate predictions of expected error and edge length, this mechanism selects, at various stages of the forward pass, the most relevant distant interactions to model. The proposed method is tailored to achieve linear complexity with the number of nodes in the input graph. To train and evaluate our network, we present a benchmark consisting of several datasets with different types of multiple scattering problems. Our experiments show that our approach surpasses existing state-of-the-art learning-based methods on the considered tasks and investigate the generalization capabilities to settings with an increased number of obstacles and out-of-distribution obstacle shapes. github.com/LARIAD/ScaGNN

0.34

The proton structure one mode at a time: a Neural Tangent Kernel analysis of a DIS fit

cs.LG hep-ph ·2026-10-26 ·Amedeo Chiefa, Luigi Del Debbio, Richard Kenway
similarity 0.54
Abstract · 70 pages, 37 figures

We study the training dynamics of a feed-forward neural network (NN) through the analysis of the neural tangent kernel (NTK) in a phenomenologically relevant fit of parton distribution functions (PDFs) from deep inelastic scattering (DIS) data. The exact integration of the gradient flow derived in a previous single-flavour analysis is generalised to the multi-flavour case, yielding an analytical perspective on the relationship between data and methodology during training. The Shapley value recently used in the context of PDFs is derived within our statistical framework for observables that depend linearly on the PDFs, and we outline a geometric interpretation of training. We expose the role of gradient-based optimisation algorithms and of the parametrisation in the regularisation of the ill-posed inverse problem that affects the determination of PDFs from experimental data, demonstrating that the regularisation amounts to the incremental inclusion of NTK modes, each learned at the timescale set by the corresponding eigenvalue. We find that only a few leading modes of the NTK are necessary to reconstruct the target PDFs, while the noise of the data is carried by the sub-leading ones learned at later stages of training. Finally, we consider the impact of the initialisation on the training dynamics, and recover a transient behaviour observed in the previous analysis and in the machine learning (ML) literature. Beyond sharpening our understanding of the training dynamics, our framework can be applied to other parametrisations (such as fixed functional forms) and ML applications in physics, as well as to stress tests in the presence of inconsistent data.

0.26

Scalable Bayesian Optimization of Composite Functions for Image-Based Inverse Problems in Materials Characterization

cs.LG cond-mat.mtrl-sci ·2026-09-02 ·Dasol Yoon, Poompol Buathong, Chia-Hao Lee, Yujia Zhang, David A. Muller +1 more
similarity 0.54
Abstract · 28 pages. Dasol Yoon and Poompol Buathong contributed equally

Estimating physical parameters from scientific images is a common inverse problem in materials characterization that often relies on expensive physics-based simulations. In electron microscopy, specimen thickness and crystal mistilt are critical parameters that govern how electrons scatter through the sample, and therefore the accuracy of any atomic-scale structure recovered from it. They are commonly inferred by matching experimental position-averaged convergent-beam electron diffraction (PACBED) patterns to simulated ones, but grid searches scale poorly and neural-network methods require extensive pretraining that may not transfer to new conditions. Here, we propose scalable Bayesian optimization of composite functions (SBOCF), a simulation-efficient method that exploits the known composite structure of the image-matching objective and the intermediate information contained in simulated images. By representing PACBED images with patch-level summaries and two correction terms, SBOCF preserves the original pixel-wise objective while reducing the number of modeled outputs from 24,649 to 11. Under a budget of 50 simulator evaluations, SBOCF outperformed standard Bayesian optimization with expected improvement on synthetic SrTiO3 benchmarks with thick and thin specimens, reducing the median final SSE by up to 290 times in the thick-sample case. On experimental data, SBOCF produced parameter estimates consistent with previously reported values without task-specific pretraining. For a simulated mistilted specimen, using the SBOCF estimates in a downstream ptychographic reconstruction recovered sharp atoms that were otherwise blurred. These results establish SBOCF as a promising approach for inverse problems involving expensive simulators and high-dimensional structured outputs.

0.27