CS Paper Radar

Point4D: Long-range 4D Motion Reconstruction

Minsik Jeon, Jay Karhade, Deva Ramanan, Shubham Tulsiani

cs.CV ·submitted 2026-09-08 17:58 UTC · v1
code/data

Abstract

We introduce Point4D, a feed-forward model for 4D reconstruction of long-range video sequences. Point4D is able to reliably infer dense per-point 3D trajectories across multi-hundred-frame videos, unlike existing 4D methods that are limited to short input windows of at most a few dozen frames. A key innovation that enables this is our flexible 3D query-based motion decoder that decouples trajectory prediction from image-plane visibility. The predicted 3D endpoints are then directly re-queried in the next chunk without re-projection or matching. Furthermore, we show that extracting and reusing a visual descriptor from an arbitrary frame where the point is visible leads to better performance than relying solely on the source patch. Overall, Point4D achieves state-of-the-art performance across diverse long-video tracking benchmarks spanning over 200 frames and largely outperforms previous feed-forward 4D method. Project page: https://point-4d.github.io

Closest papers

Nearest neighbours by meaning across the whole index.

Gen4P: Video Generators are 4D Perceivers

cs.CV ·2026-10-15 ·Yitong Xia, Zeren Jiang, Chuanxia Zheng
code/data similarity 0.80
Abstract · Project page: https://gen4p.github.io/

We introduce Gen4P, a unified framework for recovering 4D geometry and motion from monocular video. We show that a pretrained video generator can be repurposed into a feed-forward 4D perceiver without iterative denoising. Building on on-demand querying, Gen4P processes clean video latents in a single encoder pass and predicts the requested 4D attributes through a lightweight cross-attention decoder. The on-demand query formulation enables flexible spatial sampling, and our proposed continuous-time queries further provide temporal flexibility. To strengthen geometric knowledge, we propose a straightforward plug-in solution by incorporating a pretrained video-depth LoRA as a frozen geometry prior, improving overall performance without adding extra trainable parameters. Gen4P achieves state-of-the-art or competitive performance on tasks of 3D point tracking, video depth and camera pose estimation. Qualitative results on in-the-wild videos illustrate its capability of tracking complex motion while maintaining the delicate structure. Together, these results demonstrate the potential of video generative pretraining for unified 4D perception. See https://gen4p.github.io for more visual results.

0.31

ARROW: Arbitrary Reconstruction and Tracking of 4D Observations in the Wild

cs.CV ·2026-10-01 ·Ilya Fradlin, Christian Schmidt, Jens Piekenbrinck, Karim Knaebel, Gonzalo Martin Garcia +1 more
benchmarkcode/data similarity 0.77
Abstract · Project page at: https://www.vision.rwth-aachen.de/arrow

Dynamic scenes may be captured by a moving camera, multiple video streams, or images taken at different times. These observations reveal complementary aspects of scene geometry and motion, yet bringing them together requires establishing correspondence across viewpoints, capture times, and visibility changes. We introduce ARROW, a feed-forward model that unifies 3D reconstruction and 3D point tracking from arbitrary image sets. At its core is a novel order-invariant querying approach, which allows the association of queries with observations across arbitrary inputs. We show that exposing the model to more diverse sets of inputs during training results in improved task performance. Moreover, the resulting model is capable of generalization to a wider range of tasks including multi-view tracking. Trained with this strategy, ARROW establishes a new state of the art in 3D tracking on WorldTrack and TAPVid-3D and outperforms dedicated multi-view trackers on an adapted RGB-only MVTracker benchmark, while remaining competitive across 3D reconstruction tasks. Code and weights are publicly available.

0.45

UniQuery4R: Unified 4D Scene Reconstruction from a Single Query

cs.CV ·2026-08-18 ·Tiancheng Chen, Sheng Tang, Wenhua Jin, Weiqi Zhang, Juntong Fang +2 more
code/datahighly cited similarity 0.76
Abstract · 16 pages, 8 figures. Project page: https://kosmoresearch.github.io/UniQuery4R/

Reconstructing dynamic 4D scenes requires jointly estimating correspondence, geometry, object motion, and camera motion. Existing feed-forward methods typically predict dense task-specific maps or independently process source-target pairs, leading to unnecessary computation for sparse queries and limited feature reuse across different frame pairs. We present UniQuery4R, a query-conditioned framework that encodes a multi-frame clip once and selects the source view, target view, and continuous source-image coordinate only at decoding time via source-to-target cross-attention. Each query jointly predicts target correspondence, target-time 3D position, and scene flow, along with source depth, while camera parameters are estimated per view. This design allows the encoded clip to be reused across arbitrary source-target selections and supports both sparse inference and dense reconstruction through batched queries, without learned temporal embeddings tied to a fixed clip length. We further introduce a direction-magnitude parameterization of scene flow with separate supervision for moving and static points. Among the evaluated methods, UniQuery4R achieves the best macro-average results on WorldTrack for both scene-flow estimation and dynamic-point reconstruction.

0.58

SM4RT: Cascaded Feed-forward Model for 4D Reconstruction

cs.CV ·2026-11-05 ·Pang-Chi Lo, Jhao-Syun Lai, Tsung-Wei Ke
benchmarkcode/data similarity 0.76
Abstract · Project page: https://sm4rt-eailab.github.io/

We introduce SM4RT, a multi-task cascade feed-forward model for dynamic scene reconstruction from RGB videos. While existing feed-forward approaches typically address geometry reconstruction and motion estimation separately--and often predict motions in a single coordinate frame that must account for camera movement--SM4RT solves these tasks sequentially by first reconstructing 3D geometry and then bootstrapping motion estimation from the predicted structure. By expressing each pixel's 3D motion in its corresponding camera frame, SM4RT reduces ambiguity arising from camera motion. To address the sparsity of real-world motion labels, SM4RT further incorporates a weakly supervised loss that regularizes unlabeled point motions using labeled point positions at the other time step. We evaluate motion estimation on three dynamic-scene datasets--Kubric, Waymo, and Point Odyssey--and SM4RT achieves the best performance on most metrics compared with prior baselines. We additionally benchmark geometry reconstruction on five dynamic scene datasets and show that SM4RT achieves competitive performance with state-of-the-art methods. Overall, our unified framework demonstrates that combining geometry reconstruction and motion estimation in a cascade not only avoids performance trade-offs but also enhances motion estimation through improved geometric reasoning.

0.26

Stream4D: 4D-Consistency for Streaming Autoregressive Diffusion Video Models

cs.CV cs.AI ·2026-08-20 ·Yuanhao Ban, Jiaqi Feng, Hengguang Zhou, Xiaohuan Pei, Justin Cui +1 more
code/data similarity 0.74
Abstract

Streaming autoregressive diffusion models enable real-time, long-horizon video generation, but their training objectives optimize local frame prediction rather than the geometry and dynamics of a coherent world: long rollouts accumulate geometric drift and degrade into static or unnatural motion. Recent bidirectional approaches address this problem using rewards signals built upon 3D Gaussian-Splatting reconstruction. However, a single rigid 3d reconstruction cannot model a dynamic scene, so this critic penalizes genuine object motion as reconstruction error and is maximized by freezing the video. This shortcut is especially detrimental in the AR setting, where each chunk can propagate an already-static configuration. In this work, we propose Stream4D, which replaces the static critic with a feed-forward 4D reconstruction reward that explicitly models scene dynamics, allowing coherent motion to receive high consistency rewards. To further guide motion magnitude and quality, we add a motion prior that rewards natural scene-flow magnitude while penalizing jitter and non-rigid artifacts. Our final recipe combines these two terms with a lightweight perceptual anchor. Across various autoregressive video backbones and various generation horizons, Stream4D improves 4D reconstruction quality, preserves motion more effectively, and achieves higher human-aligned preference. Project page: https://banyuanhao.github.io/Stream4D/

0.27

$π^4$: A Foundation Model for 4D Scene Geometry and Motion

cs.CV ·2026-11-17 ·Yifan Wang, Weiguang Zhao, Ni Yang, Haoyu Guo, Junting Dong +2 more
code/datapopular code similarity 0.74
Abstract

$π^4$ is a unified foundation model for 4D scene perception. From diverse, uncalibrated RGB observations in the wild---a single image, an unordered collection, or a video sequence---it recovers dense geometry, camera poses, and metric scale, together with 2D/3D point tracks and moving-object masks for multi-image inputs. It couples a geometry branch with a geometry-conditioned motion branch, which predicts image-space correspondences that are lifted into 3D using reconstructed target-view geometry. Across diverse benchmarks, $π^4$ achieves the best overall average rank in geometry evaluation, alongside competitive performance in single- and multiview 2D/3D point tracking and moving-object segmentation. With a shared backbone, the full geometry-and-motion system contains approximately 0.5B parameters---less than half the size of most baselines. It produces joint reconstructions and tracks in one forward pass, including large-scale scenes with thousands of input images despite training with contexts of at most 64 views. We further present the data and training recipe underlying these capabilities, together with empirical studies of key design choices. Code and models are available at https://github.com/yyfz/Pi4.

0.54

4DStreamCtrl: Interactive Video Generation with Online 4D Control

cs.CV cs.AI ·2026-08-26 ·Shiqian Li, Chenguo Lin, Zhiguang Liu, Yu Tang, Jiarong Ou +2 more
similarity 0.73
Abstract · 23 pages

Generative video models now synthesize footage nearly indistinguishable from reality. Their promise as interactive tools hinges on fine-grained control of how objects and the camera move over time, yet each existing approach captures only part of this: camera-parameter methods steer the viewpoint but cannot move objects, 2D-trajectory methods act in the image plane and ignore depth and occlusion, and recent 3D methods add geometry but run only offline at a fixed length. In particular, none combines 3D-consistent control of both camera and objects with real-time, streaming generation. Here we show that camera motion, object trajectories, and depth can be unified into a single 3D point-track representation, from which one model performs joint camera and object control, depth editing, and motion transfer in a single forward pass. To learn this interface at scale, we mine in-the-wild video for 3D motion supervision, yielding OpenVidHD-Motion3D, and encode it with a lightweight Geometric Motion Head that plugs into a pretrained video diffusion model. Because this encoder is temporally separable, we distill the model into a causal streaming student that generates arbitrarily long video in four denoising steps at memory independent of length. This unified design surpasses prior camera-only, 2D, and offline-3D methods in motion-control precision while covering modalities they address only in isolation. 4DStreamCtrl runs at 20 FPS on a single high-end GPU for 480p video and stays temporally coherent over hundreds of frames, enabling, to our knowledge, interactive 4D-controllable streaming generation for the first time. More broadly, grounding generation in explicit 3D geometry with efficient causal inference points toward interactive world models with closed-loop spatiotemporal control, from controllable simulators to real-time visual imagination for embodied agents.

0.17

TrackEverything: Long Horizon Dense Tracking via De-Duplicating 3D Scene Representations

cs.CV cs.AIcs.RO ·2026-09-24 ·Ayush Jain, Sreeharsha Paruchuri, Ishita Gupta, Fan Zhang, Tanner Schmidt +3 more
code/data similarity 0.73
Abstract

Existing point tracking models face a fundamental tradeoff: they can either track a sparse set of query points over long horizons, or track all points across only short clips. We introduce TrackEverything, a 3D point tracker that breaks this trade-off by representing videos as persistent 3D scene tracks in world coordinates. Grounded in the insight that videos are 2D projections of an underlying 3D world, TrackEverything decouples model complexity from video duration, allowing it to scale with unique physical scene geometry instead. Our approach introduces three key innovations. First, we employ a voxelization-based de-duplication mechanism at sliding-window boundaries to merge co-located tracks, preventing repeated observations of the same surface from redundantly accumulating. Second, we decompose tracking into an endpoint refiner that predicts each point's destination and static-versus-dynamic classification, followed by a lightweight trajectory refiner that decodes dense trajectories exclusively for dynamic points. Third, we propose 3D WAFT, replacing memory-prohibitive 4D correlation volumes with efficient feature sampling in the scene cloud. To the best of our knowledge, TrackEverything is the first 3D tracker capable of tracking all visible points across videos exceeding 1000 frames within 40 GB of GPU memory. On TAPVid-3D, TrackEverything outperforms all open-source all-frame dense 3D trackers by more than 20% APD on short clips, while remaining competitive with state-of-the-art sparse trackers on long sequences, despite tracking far more points.

0.26