CS Paper Radar

Semi-Cooperative Passive Integrated Sensing and Communication by Utilizing Physical Layer Information of 5G Signals

Bo Wei, Ryusei Ogane, Hang Song

eess.SY eess.SP ·submitted 2026-09-09 07:50 UTC · v1
code/data

Abstract

In recent years, integrated sensing and communication (ISAC) has attracted significant attention towards future cellular networks. Currently, various works have demonstrated sensing performance in existing wireless communication systems. Most of the demonstrations are based on passive type due to the radio regulatory. However, because of the difficulty in access to the communication protocol stacks in commercial cellular systems, the evaluation of the cellular communication signals for semi-cooperative passive ISAC is limited. In this paper, a semi-cooperative passive ISAC system is developed with open-source 5G framework and software-defined radio devices. And the performance is experimentally evaluated by utilizing the physical layer information of actual 5G signals from the developed system. In this system, communication is established with 5G signals and physical layer information are obtained and extracted for analysis. The performance of the system is verified by conducting experiments under several communication scenarios including the synchronization, pinging, and data transmission. Different physical layer information is collected, and the propagation characteristics are analyzed by a multi-path configuration. The experiment results demonstrated that variable bandwidths were utilized for different communication scenarios and the multipath was successfully detected with two different approaches. These results show that the developed system is promising for semi-cooperative passive ISAC in wider application fields

Closest papers

Nearest neighbours by meaning across the whole index.

ISAC in 3GPP: Evolution Toward 6G

cs.NI cs.IT ·2026-08-15 ·Neeraj Varshney
similarity 0.57
Abstract · submitted for possible publication in IEEE Journal

Integrated sensing and communication (ISAC) is emerging as an important direction in the Third Generation Partnership Project (3GPP) evolution toward 6G because it allows cellular networks to provide environmental awareness in addition to connectivity. This paper surveys the current 3GPP trajectory from Release~19 feasibility studies to Release~20 radio, protocol, and architecture studies, while distinguishing established requirements, ongoing study assumptions, and possible forward directions. The survey covers service requirements, sensing topologies, channel model evolution beyond 3GPP Technical Report (TR)~38.901, Radio Access Network Working Group~1 (RAN1) physical layer design, Radio Access Network Working Groups~2 and~3 (RAN2 and RAN3) system implications, and the role of sensing-assisted communication. It also synthesizes the main unresolved issues in waveform and reference signal design, multi-node coordination, sensing data reporting, service exposure, privacy, and implementation constraints. By connecting service-level motivations to physical layer, protocol, and architecture implications, the paper provides a standards-centric reading of how 3GPP may evolve toward practical 6G ISAC support.

0.36

Integrated Sensing and Communications over Hierarchical Cellular and Cell-Free MIMO Systems

cs.IT eess.SP ·2026-08-19 ·Wei Jiang, Hans D. Schotten
similarity 0.57
Abstract · IEEE Globecom 2026

This paper studies integrated sensing and communications (ISAC) over a hybrid system that seamlessly combines legacy cellular base stations with distributed cell-free (CF) access points (APs). We propose a hierarchical ISAC architecture where a central base station (CBS) serves its near users and simultaneously operates as a monostatic radar for aerial target detection, while distributed APs---many idle under user-centric clustering---act as cost-free bistatic receivers. The CBS jointly handles communication processing and multi-static sensing fusion, reducing fronthaul overhead compared to conventional cell-free ISAC. To achieve this, a five-phase time-division duplexing workflow with precise ISAC role assignment is specified. Closed-form expressions for spectral efficiency and multi-static sensing signal-to-noise ratio analytically characterize the communications--sensing Pareto frontier. Numerical results confirm that the proposed hierarchical design simultaneously achieves higher sum throughput and superior sensing accuracy than conventional cell-free ISAC.

0.29

Evolution Toward Sensing-Enabled RAN: Practical Bistatic Sensing via Uplink

eess.SP ·2026-10-14 ·Kenan Turbic, Khanh-Toan Pham, Slawomir Stanczak
publishedcode/data similarity 0.56
Abstract · Accepted for presentation at IEEE ISAC 2026

This paper considers uplink channel state information (CSI)-based sensing as an opportunistic approach to enabling sensing in cellular networks, with minimum required modifications to the infrastructure. A practical sensing signal processing procedure is presented, combining 5G positioning function with multi-antenna array processing for passive target localization. The approach is validated through simulation and practical experiments with a software-defined radio-based setup, utilizing open-source software frameworks and commercially available hardware components. Results demonstrate feasibility of the uplink CSI-based sensing for detection, localization and tracking of moving targets over local areas.

0.47

Three Stages of ISAC Signal Design: Principles, Methods and Standardization

eess.SP ·2026-09-27 ·Zhiyong Feng, Zhiqing Wei, Haotian Liu, Yichen Wu, Lin Wang +1 more
similarity 0.55
Abstract · 9 pages, 5 figures

Emerging scenarios, including low-altitude economy and intelligent transportation, require ultra-reliable communi- cation and high-precision sensing, making integrated sensing and communication (ISAC) a key enabler for sixth-generation (6G) networks. The ISAC signal serves as the carrier for both communication and sensing, and its design directly affects the overall performance of ISAC system. This article presents a progressive roadmap of ISAC signal design. First, we establish a multi-dimensional performance metric framework of ISAC signal covering communication, sensing, and radio-frequency (RF) performance. Second, we introduce a three-stage ISAC signal design paradigm, namely UNLEASH POTENTIAL, EXPAND DIMENSIONS, and DEEPEN COLLABORATION. This paradigm progresses from the exploitation of existing signals, through the design of new waveform bases and multi-dimensional signal structures, to the ISAC signal design with multi-node cooperation. Finally, we propose a corresponding standardization roadmap that evolves from compatibility with existing communication sys- tems toward native and cooperation-enabled ISAC. The resulting framework provides practical guidance for ISAC signal design and the standard evolution toward 6G.

0.20

TRP-UE Bistatic Sensing for 6G Performance Analysis and Insights

eess.SP ·2026-10-14 ·Necati Kagan Erkek, Marco Di Renzo, Arman Shojaeifard, Yasser Mestrah, Remun Koirala +2 more
similarity 0.55
Abstract · 22 pages

Integrated sensing and communication (ISAC) equips cellular networks with the dual capability of data transmission and environmental sensing by sharing spectrum, waveforms, and radio hardware. While network-side sensing via transmission-reception points (TRPs) has been widely investigated, the use of user equipment (UEs) as sensing receivers introduces additional bistatic viewpoints and can improve target observability. UE-assisted operation is nevertheless constrained by small UE apertures and by waveform processing, especially when data-bearing communication signals are reused for sensing. The present paper investigates theoretical limits and operating conditions for UE-assisted passive target positioning, with emphasis on hybrid operation that fuses TRP--TRP and TRP--UE measurements. A unified OFDM-based signal-and-noise model is developed to cover both positioning reference signals (PRS) and communication waveform reuse with modulation-dependent noise enhancement. Based on this model, closed-form Fisher-information expressions and Cramer-Rao lower bounds are derived for delay and angular parameters and are mapped to positioning error bounds (PEBs) for two estimator classes: time-angle positioning based on TDOA + DoA and delay-only 3D ellipsoid positioning based on excess-delay/TDOA measurements. Monte-Carlo simulations across reference SNR, subcarrier spacing and occupied bandwidth, modulation order, radar cross section (RCS), sensing mode, and positioning algorithm identify regimes where UE participation and hybrid sensing provide significant gains and quantify the associated estimator-to-bound trade-offs.

0.54

Integrated Sensing and Communication in 3GPP: Evolution from 5G-Advanced to 6G

cs.NI ·2026-08-12 ·Xingqin Lin
similarity 0.55
Abstract · 10 pages, 4 figures, and 7 tables

Integrated sensing and communication (ISAC) extends mobile networks from information transfer toward perception of passive objects and environments. By exploiting propagation delay, Doppler, angle, and temporal variation, a mobile network can support detection and tracking while reusing licensed spectrum, infrastructure, and edge computing at network scale and under operator control. Unlike conventional radar, ISAC must additionally address multi-application access, heterogeneous sensing entities, uncertainty, privacy, trust, and integration with communication services. This article reviews the evolution of ISAC in 3GPP from 5G-Advanced to 6G. It explains Release-19 ISAC service requirements and channel models, the Release-20 sensing function architecture and reporting abstractions, and the 5G monostatic baseline for drone detection and tracking. It also examines 6G-native sensing, including passive object sensing, communication assistance, multiple sensing modes, and multi-source data integration. The article makes the evolution explicit through a comparison of sensing capabilities and KPIs, an assessment of reusable functions and deployment costs, and a quantitative UAV case study linking service targets to sensing configuration, reporting overhead, and delivery latency.

0.42

AI-Aided and AI-Oriented Integrated Sensing, Communication, and Computation: A Survey

eess.SP cs.AI ·2026-11-01 ·Yaya Etiabi, Wessam Ajib, El Mehdi Amhoud, Halima Elbiaze
survey similarity 0.53
Abstract

The evolution from 5G to 6G networks marks a transition toward the "intelligence of everything." While 5G enables enhanced connectivity, 6G aspires to embed intelligence directly into communication infrastructures, creating systems that are adaptive, context aware, and capable of autonomous decision making. Realizing such systems depends on harmonizing three fundamental functions that compete for shared network resources and often pursue conflicting goals: (i) sensing for environmental and contextual information acquisition, (ii) communication for reliable and timely information exchange, and (iii) computation for information processing and decision making. This harmonization necessitates shifting from independent optimization to their joint design as a unified system, a paradigm known as Integrated Sensing, Communication, and Computation (ISCC). In parallel, AI has emerged both as an enabling tool for ISCC optimization and as a workload whose requirements influence ISCC system design. This survey comprehensively examines ISCC from this dual perspective by distinguishing between AI-aided ISCC, in which learning-based methods support the joint design and optimization of sensing, communication, and computation, and AI-oriented ISCC, in which these functions are jointly configured to support learning, inference, and distributed intelligence. The survey further examines the co-design of AI and ISCC, where AI requirements and ISCC constraints jointly shape system and model decisions. It further provides a comparative synthesis of the resulting design approaches, system architectures, performance metrics, and evaluation practices, relates these developments to application-specific requirements across different domains, and identifies open research problems toward scalable, adaptive, and trustworthy AI-ISCC systems.

0.28

Integrated Sensing and Communication in 3GPP: Standardization, Performance Evaluation, and Experimental Validation Toward 6G

eess.SP ·2026-10-16 ·Gosan Noh, Gebremeskel Seiley Abraha, Joshua Yabana, Nathaniel Foli, Michael Ankomah Asare +8 more
similarity 0.50
Abstract

Integrated sensing and communication (ISAC) is evolving from a primarily physical-layer research into a standardized cellular-network capability spanning channel modeling, radio procedures, network architecture, and the delivery of sensing services. We review this progression within the Third Generation Partnership Project (3GPP), from Release 19 service requirements and target-aware channel modeling to the Release 20 New Radio (NR) sensing evaluation framework, radio access network procedures, and system architecture, and discuss future directions toward 6G. We then present two 3GPP-aligned simulation case studies to demonstrate the corresponding evaluation approaches. The first case study compares hard-decision, soft-decision, and hybrid fusion for unmanned aerial vehicle (UAV) sensing using multiple transmission and reception points (TRPs). Detection, false alarms, and conditional position and velocity accuracy are evaluated using receiver-derived angle estimates and separately calibrated method-specific thresholds. The second case study compares ideal and practical sensing-assisted predictive handover with conventional handover, while accounting for sensing error and information age. We further present a testbed-based measurement study that characterizes monostatic and bistatic UAV radar cross sections across frequencies, platforms, and observation angles and provides empirical support for correlated target-response modeling. Finally, we discuss open challenges and future research directions in multi-node fusion, resource and interference management, network evolution, security, privacy, and reproducible evaluation. Together, these components connect calibrated channel models, link- and system-level simulation, real-time prototypes, controlled measurements, and field trials through a staged evaluation roadmap.

0.23