CS Paper Radar

CEDD-optimizer: Enabling Cost-Efficient Dataset Distillation on Geographically Distributed Edge Systems

Dai Liu, Eishi Arima, Martin Schulz

cs.DC ·submitted 2026-09-09 13:29 UTC · v1

Abstract

Centralized learning is a fundamental paradigm in modern AI, in which data are collected from distributed edge devices and aggregated at a central host for model training. However, this pipeline is often bottlenecked by the substantial communication overhead of data collection. Dataset Distillation (DD), with its high compression ratio, is therefore attractive for centralized learning on distributed data. Yet, the cost efficiency of DD in non-uniform edge environments remains largely unexplored. Geographically distributed edge devices face different energy and data-transfer prices, while key DD hyperparameters, such as the target compression ratio and number of distillation steps, substantially affect energy use, transfer overhead, and downstream test accuracy. These hyperparameters must therefore be tuned both locally and globally. We propose the Cost-Efficient Dataset Distillation optimizer (CEDD-optimizer), a hyperparameter-tuning framework for cost-efficient distributed DD. It minimizes total cost under a training-quality constraint by optimizing hyperparameter settings across edge devices while accounting for environmental non-uniformity. The framework comprises two modules: CEDD-calibrator and CEDD-solver. CEDD-calibrator identifies parameters for our energy and training-quality models: the former is determined through offline calibration, whereas the latter is estimated online through a three-step tuning scheme. Based on these models, CEDD-solver solves the cost-minimization problem to steer and improve the distributed DD workflow. Experiments across various image datasets show that our approach achieves up to a 20.8 improvement over the baseline DD method under the same quality constraint.

Closest papers

Nearest neighbours by meaning across the whole index.

DynSL: Resource-Adaptive Model Training across Heterogeneous Edge Devices

cs.DC cs.LGcs.NI ·2026-11-02 ·Boris Radovič, Istemi Ekin Akkus, Marco Canini, Ruichuan Chen, Alice Dethise +2 more
publishedcode/data similarity 0.69
Abstract · Accepted at ACM Symposium on Cloud Computing (SoCC '26), Singapore, November 18-20, 2026. Code: https://github.com/BorisRado/dynsl

Training models over data distributed across edge devices presents a trade-off: centralizing data simplifies training but raises privacy and regulatory concerns, while full local training may exceed the devices' compute and memory capacity. Split learning addresses this challenge by partitioning the model between clients and the server, allowing part of the computation to be offloaded. However, existing approaches typically rely on static split configurations or simplified assumptions that fail to capture the heterogeneity and complex dynamics of real deployments. We present DynSL, a framework that dynamically allocates model layers between clients and the server by continuously monitoring system metrics and periodically solving an optimization problem that accounts for client and server computation and communication. When beneficial, the system reconfigures the split, enabling the offloading strategy to adapt to changing device capabilities and system conditions. Extensive experiments on a testbed of 24 heterogeneous edge devices show that DynSL reduces training time by up to $\sim\!$30% over the strongest adaptive baseline and by more than 50% over a suboptimal uniform split, with no loss -- and sometimes a gain -- in accuracy.

0.37

Benchmarking Model Compression Techniques Across Heterogeneous Edge Platforms: A Predictive Maintenance Use Case for Rotating Machinery

cs.LG cs.PF ·2026-10-21 ·Matheus Calheira Guimarães de Oliveira, Marco Aurélio da Silva Cruz, Regis Cardoso, Lucas Cambuim, Rafael Macieira +7 more
similarity 0.65
Abstract

To enable Industry 5.0, where autonomous systems are widely adopted and integrated with people to promote sustainable development in industries, it is imperative to adapt complex deep learning models to operate efficiently on resource-constrained hardware for edge inference. However, adapting these models remains challenging due to the hardware heterogeneity of edge computing in industrial settings, performance degradation caused by model compression, and the lack of clear guidance on which compression techniques are practical and effective for applications such as predictive maintenance. To address these challenges, this paper presents a comprehensive comparative analysis of four state-of-the-art model compression techniques applied to a high-performance convolutional neural network for predictive maintenance using a real-world dataset of rotating machinery, equipment typically used in industry. The compressed models were evaluated across a heterogeneous set of nine computing platforms, ranging from highly constrained edge computing devices to general purpose and high-performance processors, reflecting the diversity and fragmentation typical of industrial edge environments. By jointly prioritizing classification performance, inference speed, and compression ratio, we found that compression using knowledge distillation emerged as the most effective approach. The model had more than 90% speedup across all devices while maintaining a 91.22% balanced F-score, with a very small drop in predictive performance relative to the uncompressed model, along with a 98.9% size reduction. Through successful deployment across multiple edge platforms and a systematic comparison of compression strategies, we demonstrated a clear path to achieving Industry 5.0 targets, drastically cutting computational costs and, consequently, energy consumption without sacrificing predictive performance.

0.13

ShardMeter: Sharded and Geo-Distributed Training Without the Guesswork

cs.DC cs.AI ·2026-08-24 ·Tim Beringer, Patrick Diem, Felix Wolf, Arya Mazaheri
similarity 0.65
Abstract

Training large-scale AI models often outgrows a single data center, demanding sharded, multi-cluster, and decentralized training. However, the huge space of resource allocations makes exhaustive benchmarking and manual tuning impractical, while performance depends on tightly coupled factors like model size, GPU memory, batch size, bandwidth, and sharding strategy. We introduce ShardMeter, a lightweight analytical performance model that predicts the end-to-end runtime of transformer-based workloads across arbitrary sharded, distributed, and even decentralized training. Given a model's characteristics and a target hardware topology, ShardMeter estimates per-GPU and per-island throughput, training cost, total wall-clock time, and identifies performance bottlenecks. Our analysis reveals diminishing-return regimes as island size increases, quantifies transitions between compute- and communication-bound scaling, evaluates hyperparameter trade-offs, and models cost-throughput for large-scale decentralized training. ShardMeter exposes these insights to quickly explore the configuration space, choose near-optimal deployment plans, and avoid costly trial and error.

0.09

Data-free Multistep Diffusion Distillation

cs.CV ·2026-10-13 ·Ngoc Duy Tran, Kien Do, Duc Thanh Nguyen, Truyen Tran
similarity 0.64
Abstract · 22 pages, 14 figures, 10 tables

One-step diffusion distillation achieves strong performance on small datasets but remains insufficient for high-resolution or complex text-to-image settings. Extending to multistep distillation often requires training data, suffers from early-step degradation, inconsistent outputs across sampling budgets, and incurs high computational cost. We identify that these limitations stem from simultaneous training, where a single adapted network approximates multiple score functions of different student distributions at once, causing biased distribution matching and unstable optimization. Therefore, we propose Progressive Multistep Data-free Distillation (PMDD), which assigns a dedicated adapted network per student distribution while avoiding the memory overhead of maintaining multiple adapted networks. Combined with a stage-wise unforget loss to preserve earlier-step generations, PMDD reduces optimization bias in the student, provides faster convergence, and a single unified model that supports multiple inference budgets. Extensive experiments show that PMDD matches or outperforms data-free few-step baselines at every multistep budget, reaches FID 1.99 on ImageNet 64x64 in two steps, below its 512-NFE teacher (2.32), and achieves FID 7.76 on zero-shot COCO 512x512, while requiring 4-5x less training compute than data-free DMDv2 to support three inference budgets.

0.14

DS-Net: A Dynamic Split Network for Edge-Cloud Collaborative Inference

cs.LG cs.CV ·2026-10-09 ·Xinyun Zhang, Li Wang, Lei Jin, Lianming Xu, Zhu Han
similarity 0.64
Abstract · 18 pages. Submitted to IEEE Transactions on Mobile Computing

Collaborative inference serves as a critical methodology in edge intelligence. Existing collaborative inference methods operate by splitting the deep neural network (DNN) model between edge devices and cloud servers. However, these methods need to load different models for multiple split points when the communication or device changes, thus resulting in long switching times and substantial storage overhead on the edge side. To address this issue, we propose a Dynamic Split Network (DS-Net), which not only enables efficient split point switching but also enhances the collaborative speed and accuracy across various scenarios. Specifically, we design a dynamic switching framework that enables flexible selection among multiple split points within a single model, thereby reducing storage, memory, and switching overhead. To mitigate the feature distribution shifts and task-relevant information loss caused by dynamic splitting and high-ratio compression, we further propose a hierarchical compensation mechanism. Local alignment calibrates the decoded feature distribution at each split point, while task-specific global compensation restores task-relevant information at the global level. In addition, we incorporate sample-adaptive global compensation selection into split-point selection based on sample complexity and runtime resource conditions. Experimental results demonstrate that DS-Net reduces memory overhead by 74.6% and achieves millisecond-level switching latency. Moreover, under a 10 Mbps bandwidth constraint on the Nano platform, DS-Net outperforms state-of-the-art collaborative methods by achieving 1.2% higher accuracy on the COCO dataset, reducing latency by 42.5%, and improving throughput by a factor of 1.8$\times$.

0.29

SPADE-KD: Peer-to-Peer Collaborative Learning under Heterogeneous Settings

cs.LG ·2026-10-15 ·Harikrishna Kuttivelil, Katia Obraczka
hot direction similarity 0.63
Abstract · Previously submitted to AAAI 2027

Peer-to-peer collaborative learning is an emerging distributed deep learning paradigm that eliminates the need for a central aggregator and disseminator, avoiding the single-point-of-failure and bottleneck issues they can bring. Many such approaches use parameter averaging, requiring clients to have homogeneous model architectures, whereas others use knowledge distillation as an alternative while leaning on shared public data or centralized control infrastructure. Many of these approaches also make a one-size-fits-all assumption, i.e., jointly training a single, globally optimal solution for all clients, when in reality, clients' underlying data distributions might differ such that a globally optimal solution may not be locally optimal for all clients. To enable collaborative learning in environments with both model architecture and data distribution heterogeneity, we present SPADE-KD -- a fully decentralized model distillation framework that optimizes collaboration towards personalized rather than global performance. SPADE-KD leverages two mechanisms -- adaptive distillation and utility-driven peer selection. Adaptive distillation modulates the strength of each incoming model transfer by the performance advantage of the incoming model compared to the native model measured by their task losses, such that a client will distill more aggressively from incoming models that outperform it on its own local data. Utility-driven peer selection uses the loss-informed utility derived from adaptive distillation to rank prospective partners, focusing on exchanges that measurably improve the local model while suppressing low-utility transfers. Using federated classification tasks, we demonstrate that SPADE-KD consistent outperforms naive decentralized distillation with lower loss and faster convergence and that its individual components are more effective together than independently.

0.24

Resource-aware Sub-network Allocation for Heterogeneous Decentralized Learning

cs.DC ·2026-10-15 ·Zhuojun Tian, Ming Xiao, Mikael Skoglund
similarity 0.63
Abstract · Submitted to TCCN

System heterogeneity in computation, communication, and memory can substantially limit synchronous decentralized learning, where each training round is constrained by resource-limited nodes. Existing approaches provide limited support for jointly determining node-specific model capacities from deployment resources. We propose RASA-DL, a resource-aware sub-network allocation framework that treats the maximum sub-network width assigned to each node as a deployment variable. RASA-DL combines offline hardware profiling of computation and memory costs with deployment-aware profiling of learning utility under heterogeneous decentralized training. Using these profiles together with node- and link-level resource information, we formulate deployment as a bottleneck-latency minimization problem subject to per-node memory constraints and a required aggregate learning utility. Exploiting the monotone feasibility of the latency threshold, RASA-DL efficiently identifies the deployment through a binary-search-based allocation procedure. Experiments under controlled resource heterogeneity demonstrate favorable accuracy--latency tradeoffs. Under the Moderate and Severe regimes, the minimum-latency operating point improves accuracy over the largest globally feasible uniform deployment by 2.80 and 2.43 percentage points, respectively, at the same modeled round latency. The advantage is further amplified under strong Non-IID data heterogeneity.

0.13

TASTE: Throughput-Aware Batch Size Tuning for On-Device Edge Learning

cs.LG cs.AIcs.ARcs.PF ·2026-09-07 ·Avik Bhatnagar, Federico Nicolas Peccia, Oliver Bringmann
published similarity 0.62
Abstract · 8 pages, 1 tables, 6 figures; Accepted to 29th Euromicro DSD 2026

The rise of privacy-preserving artificial intelligence (AI) has shifted the focus of model adaptation and personalization towards on-device learning, where deep learning models are finetuned directly on edge hardware using local user data. However, this shift requires optimization of deep learning training on resource-constrained hardware to maximize throughput while maintaining predictive accuracy. This paper introduces a novel technique for on-device model training that incorporates an efficient Bayesian optimization-based batch size tuning approach to maximize hardware throughput. To evaluate the impact of this hyperparameter on the learning dynamics, we investigated two distinct paradigms: standard supervised learning (SL) and online continual learning (CL). Experimental results across various edge devices demonstrate a throughput ceiling, beyond which increasing the batch size yields no additional throughput gains. The proposed tuning approach identifies the optimal batch size, which, when combined with gradient accumulation and linear learning rate scaling, achieves up to a 2X increase in training throughput on platforms such as Raspberry Pi 4 compared to maximum batch sizes, without compromising model accuracy. Furthermore, in the CL paradigm, we demonstrate that optimal batch sizes maintain the stability-plasticity balance required for incremental learning, effectively mitigating catastrophic forgetting while maximizing computational efficiency on edge-hardware.

0.34