CS Paper Radar

Deformable Object Manipulation under Partial Observability via Real-Time Full-Shape Estimation

Kosar Behnia, Ville Kyrki, Gokhan Alcan

cs.RO ·submitted 2026-09-09 15:17 UTC · v1

Abstract

Manipulating deformable objects (DOs) is challenging due to their high-dimensional state space, underactuated dynamics, and partial observability. In this paper, we propose cRVAE, a lightweight conditional recurrent variational autoencoder that estimates the full DO state from only partial corner-node observations during inference. The resulting model is used as the forward model in a receding-horizon optimal control framework for obstacle-aware collaborative DO manipulation. In simulation on rope and fabric, cRVAE estimates the full DO state from the available corner-node measurements alone, matching the accuracy of a parameter-identified XPBD model. At inference it uses no physical parameters as model inputs and performs no online parameter identification. It also runs approximately 350 times faster on the rope and over 1500 times faster on the fabric per forward pass, keeping horizon-based planning within the 100 ms control budget where XPBD exceeds it already at short horizons. Full-shape estimation from corner sensing at in-loop speed is what makes the model deployable on hardware, which we demonstrate on a Unitree Go2 robot.

Comment
8 pages, 8 figures

Closest papers

Nearest neighbours by meaning across the whole index.

From Prediction to Action: Learning Physical Context for Deformable Linear Object Manipulation

cs.RO ·2026-11-10 ·Chengxiao Dong, Alessio Caporali, Hongyu Lan, Gianluca Palli
similarity 0.73
Abstract · Submitted to ICRA 2027

A representation that accurately predicts a deformable object's response is not necessarily the one most useful for choosing manipulation actions. We study this distinction between predictive utility and decision utility in planar single-grasp shape control of Deformable Linear Objects (DLOs). As a common decision backbone, we introduce Geometry-Pointer-Flow (GPF), a geometry-grounded policy that separates grasp-location selection from grasp-conditioned motion generation. Its geometry-only variant reduces one-step executed shape error by 32.8% relative to a DLO-specific diffusion policy, while using 18.7 times fewer parameters and achieving approximately 193 times faster inference. On this backbone, we compare physical context represented by ground-truth parameters, estimated parameters, and learned interaction-history representations, for both forward prediction and executed control. For prediction, ground-truth physical parameters reduce next-shape error by 15.8% over geometry alone, and estimated parameters are slightly more predictive than interaction history. This ordering does not carry over to control: estimated parameters provide no detectable one-step control gain, whereas history-conditioned GPF reduces executed error by 9.9% relative to geometry-only GPF across 470 paired simulation trials. In closed loop, interaction history improves strict-threshold attainment in simulation and yields the strongest zero-shot performance on hardware. All policies are trained exclusively in simulation and transferred to the physical robot without real-world training or fine-tuning. These results show that physical context should be evaluated by the decisions it supports rather than by predictive accuracy alone. Code will be released upon acceptance.

0.12

Multimodal MPC via Bayesian Set Optimization for Dynamic Manipulation of Deformable Linear Objects

cs.RO ·2026-10-22 ·Youyuan Long, Gokhan Solak, Arash Ajoudani
code/data similarity 0.71
Abstract

Dynamic manipulation of deformable linear objects (DLOs) remains challenging due to underactuated, high-dimensional dynamics, delayed deformation responses, and the presence of multiple feasible motions under obstacle constraints. This paper presents BM2PC, a Bayesian Multimodal MPC framework for agile manipulation of DLOs. Building on the control-as-inference posterior, BM2PC formulates multimodal planning as a set optimization problem that balances control quality and behavioral diversity. An efficient incremental update maintains multiple promising control modes with low additional computational overhead. For real-world deployment, BM2PC incorporates an execution dynamics model that predicts actual end-effector motion and compensates for execution mismatch during fast manipulation. We evaluate BM2PC on rope tracking and obstacle avoidance in simulation and hardware, and on simulated disturbance rejection. In trajectory tracking, BM2PC generalizes better to unseen trajectories than a learning-based baseline without task-specific policy training or fine-tuning. Real-world experiments demonstrate accurate long-horizon tracking, reducing RMSE by 44.0% on the longest task. In obstacle avoidance, BM2PC achieves comparable performance to existing multimodal MPC methods while reducing planning time by 29% to 66%. These results demonstrate accurate dynamic control and efficient multimodal planning within a unified MPC framework. The core implementation of BM2PC and supplementary videos are available at https://github.com/Longyouyuan/BM2PC.

0.22

ForwardDLO: Model-Based Bimanual Shape Matching of Unconstrained Deformable Linear Objects

cs.RO ·2026-09-16 ·Tim Missal, Berk Guler, Lucas Domingues, Simon Manschitz, Jan Peters +1 more
dataset similarity 0.71
Abstract · 8 pages, 5 figures

Ropes, cables, and other deformable linear objects appear in tasks from untangling to cable routing and suturing, yet controlling their shape remains a challenge in robot manipulation. We study model-based shape control in a general setting: the object lies unfixated on a support surface and two arms may grasp and move it anywhere along its length. Because each arm chooses a grasp point, direction, and magnitude, the joint action space is combinatorially large, and the dynamics model's per-prediction cost bounds how much of it a planner can search. We present ForwardDLO, a recurrent latent dynamics model for this unfixated bimanual setting that predicts per-segment displacements grounded in the observed rope state at every step. Our model reaches accuracy comparable to more expensive baselines while containing no explicit segment-to-segment operations, which makes batched evaluation of candidate actions cheap. On open-loop prediction of real rope motion it reaches the lowest error of the learned models we evaluate, 13% below the strongest baseline. Within a fixed time budget it scores 8 to 22 times more candidate actions than models of comparable accuracy while matching them in real-world shape matching; and on a simulated routing task at a 30Hz control rate, this throughput converts into 98% task success versus at most 30% for the baselines at their own budgets. We release the model, code, and a dataset of 2.42 million simulated and 14,107 real rope transitions at https://anonymous.4open.science/r/ForwardDLO/

0.36

DeepSoMo: Deformable Object Motion Estimation under Proprioceptive Partial Observability via Predictive Latent Dynamics

cs.RO ·2026-11-08 ·Hanwen Zhao, Weicheng Dai, Luoyao Chen, Chen Feng
position similarity 0.69
Abstract

Estimating the motion of deformable bodies in soft robotics from proprioceptive sensing is challenging due to partial observability, as internal observations provide only indirect access to global motion, contact, and shape evolution. In such settings, instantaneous observations are insufficient, and accurate estimation requires temporally consistent latent representations. This paper studies deformable motion estimation under proprioceptive partial observability from a latent dynamics perspective. We argue that a key requirement for long-horizon estimation is latent temporal consistency, where latent states remain predictive of future observations. To this end, we present DeepSoMo, a learning-based framework that enforces predictive structure in latent dynamics through a self-supervised latent prediction constraint. We evaluate the approach in a canonical deformable dynamics setting using high-fidelity finite-element simulation as a controlled source of ground truth. Results demonstrate consistent improvements in trajectory estimation, orientation recovery, shape reconstruction, and contact inference over architecture-matched recurrent baselines.

0.22

Physics Residual Dynamics and Reduced Order Whole-Body Planning for Obstacle Aware Human Robot Cloth CoTransportation

cs.RO ·2026-10-05 ·Moein Forouhar, Kosar Behnia, Anirvan Dutta, Hamid Sadeghian, Ville Kyrki +3 more
similarity 0.69
Abstract

Human--robot co-transportation of deformable objects requires predicting object deformation during motion, since obstacle clearance depends on both the grasp points and the unactuated interior. We present a hierarchical planning framework that combines a learned cloth model with a reduced-order whole-body model of a dual-arm mobile manipulator. A physics-residual conditional recurrent variational autoencoder (p-cRVAE) predicts the full cloth configuration from grasp-point observations by learning a residual correction to a computationally efficient linearized physics model, limiting error accumulation over 40-step planning horizon. The predicted cloth dynamics are embedded in a model predictive path integral (MPPI) planner using a reduced-order representation of a dual-arm mobile manipulator that preserves the non-holonomic base constraint and arm workspace limits. An MPC layer subsequently refines the sampled motion into smooth, executable references for whole-body control. The reduced-order formulation achieves tracking performance comparable to the full 17-DoF model while reducing computation time by approximately 80%. Across four co-transportation scenarios and two carrying speeds, the proposed framework maintains cloth-obstacle clearance where a corner-following baseline results in collisions, while whole-body refinement reduces final cloth deformation from 0.93\,m to 0.28\,m.

0.29

DefFlow: Goal-Conditioned Deformable Object Manipulation using 3D Point Flows

cs.RO ·2026-10-16 ·Gaurav Singh, Sergio Orozco, Ryan Duong, Mete Tuluhan Akbulut, George Konidaris +1 more
similarity 0.68
Abstract

Manipulating deformable objects toward desired 3D configurations is a fundamental capability for robots operating in unstructured physical environments. However, as the range of possible initial and target configurations grows, goal-conditioned deformable manipulation requires a robot to infer increasingly diverse manipulation behaviors in addition to precise continuous actions. We introduce DefFlow, a framework for goal-conditioned manipulation of deformable objects toward a broad range of 3D configurations. DefFlow learns from demonstrations by jointly predicting the goal-conditioned 3D point flow of the robot and deformable object. We show that this formulation better captures both the manipulation decisions, such as when and where to grasp, release, or re-grasp, and the precise continuous motions required for goal reaching, rather than predicting only the robot flow. Across rope, granular-media, and cloth manipulation settings with diverse initial and target configurations, DefFlow substantially outperforms goal-conditioned action-prediction and robot-flow-only baselines on success rates and goal-distance metrics. We further demonstrate deployment of our framework on a real robot using real point-cloud observations and unseen goal configurations.

0.15

RoboFolDeX: A Physical-World Benchmark for Long-Horizon Robotic Manipulation of Deformable Objects

cs.RO ·2026-09-09 ·Chenhuan Liu, Yi Xu, Feng Wu, Hanyang Wang, Wenxiao Kuai +5 more
benchmark similarity 0.68
Abstract

Embodied AI, including vision-language-action and world-action models, must operate reliably in the physical world. Yet methods that perform well in simulation can degrade substantially on real robots, especially in long-horizon deformable-object manipulation, where policies must track changing states and execute reliable multi-stage bimanual interactions. Existing real-robot benchmarks mainly focus on short-horizon rigid-object tasks and offer limited coverage of long-horizon deformable manipulation. We introduce RoboFolDeX, a physical-world benchmark built entirely from real-robot data, with garment folding as its primary task. Since real-robot data collection is costly, RoboFolDeX studies how heterogeneous physical experience can be reused efficiently. The benchmark is organized around four research axes: leveraging human intervention and recovery data collected during deployment; transferring data across tasks, including across garment categories and from rigid to deformable-object manipulation; reusing data across scenes with changes in lighting, background, and layout; and transferring data across robotic embodiments. RoboFolDeX provides 2,000+ hours of real-robot data spanning 20+ tasks and 10+ embodiments. We also establish a fair real-robot evaluation platform for externally submitted policies, with standardized tasks, held-out physical objects, controlled initializations, and a unified execution protocol. The platform is publicly accessible at https://ai.midea.com/#/fold-challenge. We hope RoboFolDeX will serve as a unified testbed for heterogeneous real-robot data reuse and reliable long-horizon deformable manipulation.

0.26

LIBERO-Dynamic: Benchmarking Robotic Manipulation in Dynamic Environments

cs.RO ·2026-10-17 ·Shaojie Ren, Jingwen Sun, Zezhi Liu, Hongjin Chen, Xin Jin +2 more
highly cited similarity 0.67
Abstract · 22 pages, 14 figures

Most simulation benchmarks for robotic manipulation keep target objects static and treat policy inference as instantaneous. These assumptions simplify evaluation but hide how a moving target evolves during computation and how stale an observation is when an action is executed. We introduce LIBERO-Dynamic, a dynamic extension of all 40 LIBERO tasks. It drives objects through contact friction along three trajectory families and speed tiers, while advancing the physical world according to calibrated, model-specific inference latency. The same mechanism supports training by replaying verified static demonstrations and compensating robot actions online for target displacement, producing 9,000 quality-filtered dynamic trajectories. We evaluate six pretrained policies on 1,800 dynamic conditions per configuration, compare execution strategies and action horizons with fixed checkpoints, and fine-tune three architectures using dynamic and mixed data. Faster motion degrades every policy but not uniformly; execution timing and horizon can change the behavior of the same policy; and asynchronous replanning benefits from frequent feedback only when the action queue avoids underflow. Dynamic demonstrations improve each architecture under at least one recipe, with gains varying by temporal conditioning, data composition, and training budget. A small-scale physical study shows task-dependent execution-strategy differences consistent with simulation. LIBERO-Dynamic makes object motion, inference latency, and action execution explicit and controllable for evaluating and improving robot policies in moving-target manipulation.

0.40