CS Paper Radar

UniRec: Cross-stage Multi-Task Fusion with Preference Optimization for Cascaded Recommender Systems

Lingyuan Kong, Jiaqi Cui, Fanjiao Zeng, Congqi Wang, Yu Li, Yuan Cheng, Jingxin Liu, Xiaoshuang Chen, Kaiqiao Zhan

cs.IR ·submitted 2026-09-10 03:54 UTC · v4

Abstract

Industrial recommender systems use cascaded stages with different candidate spaces, data distributions, and latency constraints. Each stage include multi-objective prediction and multi-task fusion (MTF) modules. Existing MTF methods typically design and optimize the fusion module independently for each stage, which can lead to inconsistent preferences across stages. Although cross-stage coordination methods have been proposed, they mainly transfer supervision to upstream scoring models rather than jointly optimizing the fusion modules. We propose UniRec, a Unified Cross-stage Recommendation Fusion framework that jointly optimizes pre-ranking and ranking fusion agents. UniRec employs a coupled dual-agent architecture with partially shared embeddings and stage-specific fusion functions. It further introduces Dual-Axis Preference Optimization to combine stage-local preferences with downstream-to-upstream preference transfer. To enable stable and efficient cross-stage training, we address two practical challenges: reward-induced distribution drift and the computational cost of pairwise preference learning. Extensive offline and online experiments on a production short-video system demonstrate consistent gains over single-stage fusion and cross-stage coordination baselines. In a nine-week online A/B test, UniRec improves total watch time by $0.675\%$ and app usage time by $0.616\%$, and active users by $0.189\%$, and has been fully deployed in production.

Closest papers

Nearest neighbours by meaning across the whole index.

DrEM: Dual-Side Robust Ensemble Ranking from Noisy User Preference Predictions in Video Recommendation

cs.IR ·2026-08-13 ·Canwei Huang, Tiantian He, Xiaoxiao Xu, Jun Zhang, Ziran Deng +3 more
similarity 0.68
Abstract

Industrial video recommendation systems typically adopt a multi-stage architecture. At the ensemble ranking stage, multi-dimensional user preference predictions (pxtrs) from an upstream multi-task model are fused into a unified ranking score to reflect user satisfaction. Since users' true satisfaction is difficult to observe directly, ensemble ranking models commonly use pxtrs both as input features and as a source for constructing proxy preferences. However, as outputs of an upstream prediction model, pxtrs inevitably contain prediction noise, which propagates to downstream learning across two sides. On the supervision side, noisy pxtrs may flip proxy preferences and introduce erroneous gradients. On the feature side, pxtr noise may propagate through model inputs and destabilize ranking scores. Existing ensemble ranking methods typically treat pxtrs as reliable signals and overlook such prediction noise. To address this, we propose DrEM, a dual-side robust ensemble ranking framework. Our DrEM introduces a risk-denoising robust loss that corrects the empirical risk using estimated preference flip probability. Meanwhile, it samples perturbations from the distribution of prediction noise and introduces a preference-preserving ranking consistency regularizer to improve feature-side output stability. Theoretically, we obtain an approximate distribution of the prediction noise and prove that the robust loss remains superior under flip probability estimation error. Extensive offline experiments and large-scale online A/B tests demonstrate the effectiveness and robustness of our DrEM.

0.04

Task-Blind No MORE: Multi-Task Information Flow in Unified Ranking Backbones

cs.IR ·2026-09-07 ·Yuchen Wang, Feng Niu, Qing Tan, Junting Lu, Baoxin Wu +1 more
top venue similarity 0.67
Abstract · Accepted at CIKM 2026

Industrial ranking models for recommendation have scaled feature interaction and sequence modeling separately; recent architectures such as HyFormer and MixFormer unify both in a stackable backbone. Real-world recommender systems, however, nearly always require multi-task learning, yet existing unified architectures confine multi-task modeling to shallow post-backbone towers, leaving the backbone without task-aware information flow. We propose MORE (Multi-task cO-evolving Ranking modEl), which embeds multi-task information flow inside the backbone, enabling task-specific signals to co-evolve with sequence and feature representations at every layer rather than in a post-hoc fusion. It introduces Anchor Tokens that persist across backbone layers: Shared Anchors encode cross-task commonalities, while Private Anchors capture task-specific priors. In each block, Anchor Tokens (1) read task-conditioned signals from behavior sequences, (2) mix with non-sequential features under a task-boundary mask, and (3) refine per-task representations through independent branches; as blocks stack, each task obtains a differentiated representation refined through all backbone layers. Experiments on large-scale industrial datasets show that MORE consistently outperforms baselines across all tasks under comparable parameter and FLOPs budgets, and scales well with model size. Online A/B tests on Momo, a leading Chinese social discovery platform with tens of millions of monthly active users, yield 3% improvement in usage duration, 3.6% in interaction rate, and 2% in deep-chat rate. MORE is deployed in production with request-level shared computation reducing scoring latency by about 30%.

0.26

Lightweight Ranking Heads: Accelerating Multi-Task Experimentation in Production Recommender Systems

cs.LG cs.AI ·2026-09-21 ·Sanjay Surendranath Girija, Aniruddh Nath, Li Wei, Yanhao Jiang, Shawn Andrews +4 more
published similarity 0.66
Abstract · ACM RecSys 2026 - Online and Adaptive Recommender Systems

Modern production-scale recommender systems rely on complex, multi-task ranking models. Introducing new prediction tasks into these massive systems often causes bottlenecks - it risks negative task conflicts with existing tasks, and can lead to long development and experimentation cycles due to the expensive retraining of backbone models and downstream models or tuning of reward combination formulas. To address the critical challenge of slow experimentation velocity, we introduce the Lightweight Ranking Heads (Light Heads) framework. Designed for continuous online learning environments, Light Heads enable the dynamic injection of new tasks into existing multi-task ranking models, effectively obviating the need for model cold-starting and retraining of backbone models. By utilizing stop-gradients and stateless daily training, this design strictly isolates new tasks, mitigating the risk of adverse task conflicts. Crucially, this framework uses a centralized configuration that allows Light Heads to be added to multiple models simultaneously, unblocking faster training data generation and co-training of downstream models. Successfully deployed at YouTube scale, this approach reduces the iteration cycle for multi-task experimentation from several weeks to days. In this paper, we detail the system architecture, analyze the training dynamics of stateless cold-started heads, compare their performance to full heads, and demonstrate how Light Heads have enabled the rapid A/B experimentation and deployment of new ranking tasks that yield measurable production value.

0.20

TwinJEPA: Action-Preferred Predictive Representations for Goal-Conditioned Control

eess.SY ·2026-10-02 ·Feiran You, Hongyang Du
benchmarkhot direction similarity 0.66
Abstract

Joint-Embedding Predictive Architectures (JEPAs) are a promising paradigm for representation learning by predicting future latent states without reconstructing observations. Recent work has adapted JEPA-style latent prediction to offline zero-shot control through action-conditioned temporal prediction, enabling representations to capture long-horizon dynamics from fixed behavioral data. However, transition-level predictive objectives supervise actions in isolation and provide limited information about which actions are preferable when similar states admit different goal-conditioned outcomes. We introduce TwinJEPA, a framework for learning action-preferred predictive representations by augmenting JEPA-based control with offline-mined action-preference supervision. TwinJEPA identifies approximately matched states across offline trajectories and constructs preference pairs via goal-conditioned reward relabeling. It then learns two complementary objectives: reward-gap regression, which preserves the magnitude of outcome differences, and preference classification, which captures the relative ordering of alternative actions. Both objectives are used only during training and incur no additional inference-time cost. We evaluate TwinJEPA on long-horizon navigation and continuous-control benchmarks with state- and pixel-based observations. TwinJEPA yields positive benchmark-level mean differences across all matched state-based evaluations, while analyses across domains and observation modalities indicate that larger gains tend to arise when local action alternatives provide more informative outcome contrasts. The results suggest that local action-comparison supervision can complement temporal prediction by encouraging JEPA-based representations to retain both long-horizon temporal structure and fine-grained distinctions among locally observed actions for offline zero-shot control.

0.49

Beyond Reward Scoring: Online Multi-Agent Preference Learning for Multimodal Response Generation

cs.AI ·2026-10-16 ·Ziyun Zou, Jiwoo Hong, Yifan Lu, Shao Tang, Weiyi Wu +3 more
similarity 0.65
Abstract · 32 pages, 4 figures

Multimodal preference alignment often follows a score-based RLHF pipeline: a reward model is first trained to learn human preferences, then used to score on-policy responses and optimize the response model's generation. This turns preference supervision into a scalar signal for generation: a model may learn to produce answers with higher preference scores, but is rarely trained explicitly to learn the reasons underlying human preferences. We therefore ask whether making preference understanding an internal capability of the response model can improve its generation. To investigate this question, we propose \textbf{PrefMind}, an online dual-agent reinforcement learning framework with two trainable agents: a response Generator and a preference Critic. Given a pair of candidate responses, the agents analyze and discuss which response better aligns with human preference. Human labels supervise their judgments and corrections. For pairs on which both the Generator and revised Critic correctly identify the human-preferred response, the Generator produces an improved answer, and the Critic compares it against the original preferred response to provide a generation reward. Both agents are jointly updated from interactions sampled with their current policies. Through this process, \textbf{PrefMind} trains the Generator to understand human preferences via explicit judgment and correction, and to translate this understanding into better responses. Experiments across three model scales show improvements in both standalone preference judgment and downstream response generation.

0.26

RecSoup: Efficient Model Merging Approach for Controllable Multi-Objective Recommendation

cs.IR cs.AI ·2026-10-15 ·Zidong Jia, Guofu Xie, Xiao Zhang
top venuetheorycode/data similarity 0.65
Abstract · Accepted at CIKM 2026

Recommender systems often need to balance multiple conflicting objectives. Controllable Multi-Objective Recommendation (CMOR) enables dynamic adjustment of objective trade-offs at inference time without retraining, adapting to shifting user or system requirements. Existing CMOR approaches typically rely on output-level reranking or parameter-generating modules, which either limit the scope of feasible trade-offs or incur substantial training and inference cost. Model merging provides a promising alternative by reusing multiple objective-specific models via parameter combination. However, its direct application to recommender systems is challenging due to the lack of a shared linear regime and cross-objective interference. To address these issues, we propose RecSoup, a lightweight two-stage approach for effective CMOR via specialized model merging. RecSoup first mitigates parameter interference across objectives through a pruning strategy that jointly considers objective-specific importance and cross-objective relevance. It then performs adaptive parameter merging via a learnable preference-to-coefficient mapping, allowing dynamic trade-off control at inference time without joint retraining or additional generative modules. Theoretically, we prove that RecSoup outperforms the parameter generation paradigm in effectiveness and efficiency, as it can fully navigate the Pareto front without smoothness constraints. Extensive experiments on multiple benchmarks demonstrate that RecSoup achieves improved Pareto front quality and effective controllability while delivers 165--228x faster inference-time latency than parameter generation approaches. Code is available at https://github.com/35798642/RECSOUP.git.

0.41

OneTrans-V2: Unifying Retrieval, Pre-rank, and Fine-rank with One Transformer in Industrial Recommender

cs.IR ·2026-09-23 ·Hannan Cao, Jun Guo, Haolei Pei, Zhaoqi Zhang, Tianyu Wang +16 more
similarity 0.65
Abstract

Industrial recommendation systems typically operate as a \emph{cascade} of retrieval, pre-rank, and fine-rank, but these stages are usually trained and served as separate models, causing repeated user-sequence encoding, isolated optimization, and duplicated engineering effort. Building on OneTrans' model-level unification, we present OneTrans-V2, one Transformer that unifies the entire cascade. It encodes the user behavior sequence once as a shared context while preserving stage-specific candidate features and computation. Joint training lets the three stages reinforce one another and enables in-model knowledge distillation from fine-rank to pre-rank. We scale the shared backbone with sparse mixture-of-experts (MoE), which increases capacity with bounded activated computation, and stabilize scaling with $μ$P-style parameterization. To consolidate objective-specific retrieval channels, we introduce Decision-Conditioned Generative Retrieval (DCGR). DCGR predicts a decision prefix describing the upcoming interaction and generates items conditioned on it, allowing business objectives to steer a single generative process. Finally, Sequence-Native Training (SNT) organizes training around each user's lifelong behavior sequence and amortizes its encoding across exposures. Deployed across all three stages of a large-scale industrial recommendation system, OneTrans-V2 improves gross merchandise value (GMV) by 9.74\% and, with a co-designed serving stack, delivers $3.2\times$ the throughput of the cascade it replaces under the same hardware budget.

0.28

Learned Cross-Task Relationships in Multi-Task Models

cs.AI ·2026-09-23 ·Victor Zhang, Yiping Yuan, Florian Raudies, Bosun Adeoti, Brian Y. C. Leung +2 more
top venue similarity 0.64
Abstract · Accepted to the 20th ACM Conference on Recommender Systems (RecSys 2026). 10 pages, 6 figures

We propose a framework that learns cross-task relationships in multi-task models by approximating the joint distribution of task labels through targeted pairwise relationships. This approach improves performance via transfer learning and enhances information extraction without the intractable complexity of modeling the full joint space. Although our framework applies to any multi-task system, we demonstrate its efficacy within YouTube's production recommendation systems. Experiments across the Notifications, Homepage, and Watch Next surfaces show improvements in both accuracy and user satisfaction metrics. Finally, we propose a workflow template to facilitate broader future implementation.

0.38