CS Paper Radar

Trellis-Based Noise Modulation with Soft-Decision Viterbi Detection

Razieh Torkamani, Hadi Zayyani, Mohammad Salman, Felipe A. P. de Figueiredo, Rausley A. A. de Souza

eess.SP ·submitted 2026-09-10 07:45 UTC · v1

Abstract

Noise modulation conveys information through the statistical properties of noise rather than conventional deterministic signal parameters. This paper investigates a trellis-based noise modulation framework that exploits temporal dependencies between successive noise-power symbols. A binary filtering-based configuration is first developed as an illustrative finite-state model for comparing hard- and soft-decision sequence detection. A joint soft Viterbi receiver is then proposed, which directly incorporates the received noise energy into a likelihood-based branch metric, avoiding the information loss associated with intermediate hard decisions. The framework is further extended to an N-ary state-dependent trellis-based noise modulation scheme, where the transmitted noise-power level depends jointly on the current input symbol and trellis state. A Bhattacharyya-distance-based method is employed for systematic power-level design. Simulation results demonstrate the advantage of soft-decision sequence detection over hard-decision processing and investigate the effects of power-level design, traceback depth, energy-per-bit-to-noise ratio, symbol duration, and modulation order. The results also reveal the trade-off between spectral efficiency, detection reliability, and trellis complexity in higher-order noise modulation.

Closest papers

Nearest neighbours by meaning across the whole index.

Low-Complexity Sequential Detection Framework for Single-Channel Co-Frequency Signal Separation

eess.SP ·2026-09-03 ·Heng Wang, Kexian Gong, Peng Sun, Wei Wang, Hua Jiang
benchmark similarity 0.53
Abstract · This work has been submitted to IEEE for possible publication. Copyright may be transferred without notice, after which this version may no …

Practical separation of single-channel co-frequency signals (SCCFSs) is hindered by the prohibitive computational complexity of benchmark algorithms. To address this issue, we propose a low-complexity separation framework based on sequential detection (SD), in which signal separation is cast as a sequential path search over a trellis. To support both hard-decision detection and log-likelihood ratio (LLR) extraction, we develop two algorithms within this framework: the SD-based separation (SDS) algorithm and its soft-output variant (SO-SDS). Furthermore, SDS employs a windowing strategy combined with dynamic pruning to concentrate computational resources on high-probability paths, thereby enabling efficient detection of transmitted symbol sequences. Building upon SDS, SO-SDS further incorporates a state completeness verification mechanism (SCVM) to estimate bit LLRs, thus facilitating subsequent soft decoding. Numerical results show that, compared to benchmark algorithms, SDS achieves significant complexity reduction without degrading separation performance, while SO-SDS offers notable computational savings with only modest LLR accuracy loss. Notably, the computational complexity advantage of the proposed algorithms over benchmark algorithms grows substantially with increasing modulation order.

0.47

Four-Level Quantized Soft Information Aided Hard-Decision Decoder for Product-like Codes

cs.IT ·2026-10-15 ·Xiaowei Wu, Min Qiu, Yueying Zhan, Lei Yang
published similarity 0.52
Abstract · Accepted by IEEE Communications Letters

We propose a novel low-complexity soft-aided hard-decision decoding scheme for product-like codes, termed iterative bounded-distance decoding (iBDD) with graded scaled reliability and bit-flipping (GSRF). This scheme operates on four-level quantized soft information. It incorporates a graded scaled reliability rule to assign decoding confidence to the bounded-distance decoding result, and employs a bit-flipping rule based on bit-level and component-code-level reliability. A selective re-decoding rule is designed to further facilitate the error performance while keeping the number of BDD attempts in reasonably low levels. The decoding parameter design of iBDD-GSRF is investigated for product codes and staircase codes, respectively. Simulation results on both codes verify that iBDD-GSRF achieves a gain of more than 0.4 dB over the conventional iBDD, comparable to several existing unquantized soft-aided decoders.

0.45

Sequential Change Point Detection for PSK Modulation Switching

cs.IT eess.SP ·2026-10-09 ·Gopal Kataria, Davin Sequeira, Arti Yardi
similarity 0.51
Abstract · 12 Pages, 5 Figures, Online change-point detection for modulation transitions using CUSUM and MOSUM detectors

Transmitters in adaptive communication systems may switch their modulation scheme at an unknown time, and a receiver must detect this switch quickly without raising frequent false alarms. Existing modulation classification methods label a finite block of received data and do not provide stopping rules with controlled false-alarm and delay performance. We study the sequential detection of a switch from one phase shift keying (PSK) scheme to another over an additive white Gaussian noise channel. We build cumulative-sum (CUSUM) and moving-sum (MOSUM) detectors from the log-likelihood ratio and its low-SNR approximation. For a switch from quadrature PSK to binary PSK, we derive the moment-generating function and probability density function of the approximate statistic. We use them to relate the CUSUM threshold to the average run length to false alarm and the worst-case detection delay. For a switch between any two PSK orders, we approximate the vector of overlapping MOSUM statistics as multivariate Gaussian and obtain bounds on both measures. Monte Carlo simulations show that our derived expressions for ARL2FA and WADD closely match the empirical results across thresholds, validating the accuracy of the proposed analytical approximations and theoretical bounds.

0.30

On the CSIT-Limited Delay Robustness of IR-HARQ in Finite Blocklength RSMA Networks

eess.SP ·2026-10-12 ·Shaima Abidrabbu
similarity 0.51
Abstract

This letter studies the throughput and reliability of power-constrained rate-splitting multiple access (RSMA) with variable-length incremental-redundancy hybrid automatic repeat request (IR-HARQ) under finite blocklength (FBL) transmission and imperfect channel state information at the transmitter (CSIT). While perfect-CSIT feedback-delay tolerance approaches a natural ceiling as signal-to-noise ratio (SNR) grows, we show imperfect CSIT imposes a strictly lower, finite ceiling set solely by CSIT quality, one that transmit power cannot overcome. We derive analytical expressions and tight approximations for common- and private-stream decoding failure probabilities, capturing FBL and CSIT uncertainty via a unified CSIT-degradation factor. Also, we show that residual interference saturates effective stream power at high SNR, limiting reliability and producing this delay-tolerance ceiling. Simulations validate the analysis and quantify the ceiling, offering design insights for delay-robust RSMA under imperfect CSIT.

0.21

Low-complexity Soft-decision LLR Calculations for Next-generation IM-DD Systems with RIN

eess.SP ·2026-08-20 ·Felipe Villenas, Yunus Can Gültekin, Alex Alvarado
published similarity 0.50
Abstract

The demand for higher speeds in intra-data center interconnects will eventually require high-order pulse amplitude modulation (PAM) combined with soft-decision (SD) forward error correction (FEC). The laser relative intensity noise (RIN) is an important noise impairment that limits the performance of high-speed intensity-modulation (IM) and direct-detection (DD) systems, as it induces a channel with signal-dependent noise. In this paper, we show that an accurate calculation of the log-likelihood ratios (LLRs) is critical for the performance of the SD-FEC decoder in RIN-dominated IM-DD systems. First, we show that assuming signal-independent additive white Gaussian noise (AWGN) statistics to compute LLRs results in a significant penalty in performance. As an alternative, we propose a low-complexity piecewise linear approximation of the exact LLRs of Gray-coded PAM-4 and PAM-8 for the RIN-dominated IM-DD channel. We show using the generalized mutual information that our approximation results in no performance loss versus using exact LLRs, unlike the AWGN-like assumption. Furthermore, we validate the analysis with bit error rate (BER) performance of SD decoding. We show that our approximation matches the BERs achieved using exact LLRs. Therefore, our approximation avoids a BER error floor penalty of up to 7.2 times using an extended Hamming code with PAM-4, and up to 2.41 dB of optical modulation amplitude penalty using high-code-rate low-density parity-check codes with PAM-8 for the same target BER.

0.33

Receive Diversity for Differential Binary Noise Modulation

eess.SP ·2026-08-25 ·Paulo V. B. Tomé, André A. dos Anjos, Hugerles S. Silva, Daniel C. Araújo, Robson D. Vieira +1 more
similarity 0.50
Abstract

Differential binary noise (DBN) modulation encodes information in the polarity transition of a reused noise realization, dispensing channel state information and carrier-phase recovery. This letter proposes single-input multiple-output (SIMO) reception for DBN via post-correlation decision-statistic combining, followed by one zero-threshold decision. The combined statistic is a Hermitian quadratic form in complex Gaussian vectors, yielding an exact conditional bit error probability (BEP) with no Gaussian approximation. Averaging it over $κ$-$μ$ fading and the reused energy gives the exact BEP for arbitrary weights. Because that energy is shared, its deep fades are common to every branch, and the observation length caps the diversity order at $\min(Mμ,N)$. The deflection-optimal weights follow in closed form and interpolate soft combining and power weighting. Measured 65 GHz indoor non-line-of-sight (NLoS) results quantify the trade-off between spatial resources and observation length.

0.35

Entropy-Based and Quadratic Conditional Innovation Metrics for Informed Dynamic Scheduling of Belief-Propagation Decoding for LDPC Codes

cs.IT ·2026-11-14 ·Tofar Chih-Yuan Chang, Chia-En Liu, Ying-Ren Jian, Di-Chun Liang
published similarity 0.49
Abstract · 25 pages, 18 figures, 3 tables

We propose two enhanced conditional innovation (CI) metrics for informed dynamic scheduling (IDS) in belief-propagation (BP) decoding of LDPC codes. The CI-based residual BP (CIRBP) algorithm uses the CI metric to guide the selection of the variable node (VN) to be updated and has been shown to outperform several existing IDS-based BP decoders, especially at the early decoding stage. However, the original CI metric uses only the absolute difference between the current and precomputed posterior probabilities and does not separately account for the reliability associated with each probability. By reformulating the CI metric relative to the decision boundary, we separate each posterior probability into its decision side and a linear-distance term reflecting reliability. Replacing the latter with the binary entropy complement yields the proposed entropy-based CI (E-CI) metric. Moreover, the proposed quadratic CI (Q-CI) metric is derived from the leading quadratic term in the local expansion of the entropy complement, avoiding the logarithmic operations required for direct E-CI evaluation. We apply both proposed metrics to the CIRBP decoder and its node-wise variant. Numerical results show that the proposed metrics generally provide lower frame error rates than the original CI metric, with their relative advantages depending on the code and decoding procedure.

0.37

FTN Signaling: Spectral Efficiency from BPSK to 16-QAM

cs.IT eess.SP ·2026-10-08 ·Emre Cerci, Adem Cicek, Melda Yuksel, Gokhan M. Guvensen, Enver Cavus +2 more
benchmark similarity 0.49
Abstract · 5 pages, 5 figures, 2 tables. Submitted to IEEE Communications Letters

Faster-than-Nyquist (FTN) signaling can improve spectral efficiency by transmitting symbols closer together than the Nyquist limit, at the cost of additional inter-symbol interference (ISI). In this letter, we study the finite-alphabet symbol-wise achievable information rate (AIR) of FTN signaling for BPSK, QPSK, and 16-QAM under a transmit-power constraint and a common minimum mean square error (MMSE) channel-shortening (CS) detection framework, cross-validated for BPSK against an independent reduced-state Ungerboeck Bahl-Cocke-Jelinek-Raviv (BCJR) benchmark. Our results show a clear trend. Lower-order constellations can benefit from more aggressive time acceleration, while higher-order constellations become less tolerant of acceleration and achieve their best spectral efficiency closer to the Nyquist limit. At a reference signal-to-noise ratio (SNR) of 6 dB the optimum acceleration factor shifts from $τ^\star\approx0.65$ for BPSK to 0.75 for QPSK and 0.90 for 16-QAM. We further show that this trend is preserved in coded systems and remains robust to the detector memory. The impact of FTN operation on the instantaneous-to-average power ratio (IAPR) is also examined. Overall, the results highlight how constellation order should be considered when selecting the operating point for FTN signaling.

0.19