CS Paper Radar

Mi-Ripple: Restoring Images Degraded by Iterative AI Editing

Jiayin Chen, Yicheng Xu, Muting Wang

cs.CV ·submitted 2026-09-10 09:46 UTC · v1

Abstract

Iterative reference-conditioned image editing can introduce grid-like and granular textures, commonly described as digital ripple. We present Mi-Ripple, a diagnosis-guided restoration workflow that suppresses this digital ripple while protecting image structure. Mi-Ripple separates periodic lattice artifacts from content-entangled granular texture, then combines selective spectral notching, structure-aware smoothing, and cleaned-reference regeneration. This separation enables low-distortion filtering when artifacts are spectrally isolated and visual reconstruction when filtering would erase legitimate detail. Across fourteen notch-only executions, whole-image residual standard deviation is 0.08--0.44 in CIELAB lightness units. In a paired regeneration example, reference cleaning reduces output debris density by 45\%. Mi-Ripple links measurable artifact reduction to visibly cleaner generated images, rather than optimizing a spectral score alone.

Closest papers

Nearest neighbours by meaning across the whole index.

Beyond Uniform Restoration: Empowering All-in-One Restoration with Pixel-Level Multimodal Guidance

cs.CV cs.AI ·2026-08-10 ·Chunxiao Liu, Wei Liu, Anbin Xiong, Erli Meng
top venue similarity 0.61
Abstract · Accepted by ACMMM2026

All-in-one image restoration is a unified low-level vision task that aims to effectively recover high-quality images from inputs degraded by various types and levels of corruption using a single model. Recent works have achieved remarkable progress by learning degradation-adaptive prompts or network architectures. However, these methods typically apply a uniform restoration strategy across the entire image, neglecting the fact that different regions may suffer from distinct degradation types and varying degrees of severity. In contrast, we propose to perform restoration at the pixel level, thereby enabling more fine-grained and precise control over the restoration process. Specifically, we present MGN-AIR, a novel pixel-level restoration framework for all-in-one image restoration. Our approach first learns to estimate a pixel-level visual prompt. Then, it leverages both textual and visual prompts to provide global and local degradation cues, guiding the model on where to look and how to restore at each pixel. We conduct extensive experiments on multiple all-in-one image restoration benchmarks, covering a wide range of tasks including denoising, deraining, deblurring, dehazing, desnowing, and low-light enhancement. Experimental results demonstrate that our proposed method consistently and significantly outperforms existing approaches.

0.34

Denoising Textures is a Different Ballgame Altogether!

eess.IV cs.CV ·2026-10-15 ·Saptarshi Mandal, Oindrila Haldar, Chirayata Bhattacharya, Chandra Sekhar Seelamantula, Zhiwei Xu +2 more
position similarity 0.60
Abstract

The human brain effortlessly deciphers colors and textures from visual stimuli and reconstructs the world around us, yet preserving such details remains challenging in image denoising. While significant progress has been made in generic image denoising, the problem of texture denoising has remained relatively under-explored. Fine details, such as intricate patterns and repetitive structures, often suffer from over-smoothing even in deep learning based approaches for denoising. In this paper, we analyze the behavior of state-of-the-art (SOTA) denoisers on texture datasets and show that performance improvements are possible only by fine-tuning the denoisers on the texture datasets. Surprisingly, fine-tuning on texture datasets result in the models catastrophically forgetting the original dataset. These findings highlight the need for specialized treatment of textures in denoising. Since denoising quality directly impacts downstream tasks such as generative modelling, we argue that dedicated texture aware denoisers are essential for faithful texture reconstruction and synthesis.

0.18

ImIR: Image-Instruction Tuning for All-in-One Image Restoration

cs.CV ·2026-09-21 ·Süleyman Aslan, Görkay Aydemir, Mısra Yavuz, Yunus Bilge Kurt, Nasrin Rahimi +3 more
published similarity 0.59
Abstract · Accepted to ACCV 2026

Degradations vary widely across images, so a practical restoration system has to handle many degradation types with one model. A recent and effective recipe adapts a large pretrained image-editing model to restoration using a small low-rank adapter with a text prompt. We replace that prompt with an instruction derived from the degraded image itself. The image reaches the editor through two paths: its structure comes from the model's VAE, and its semantic instruction comes from a lightweight token mapper that shifts the degraded image's vision-language embedding toward the embedding a clean image would produce. Because the instruction is a continuous vector, scaling it yields a family of valid restorations for tasks whose target is not unique, such as low-light enhancement. We adapt one Qwen-Image-Edit model to six tasks with a single adapter trained in about three hours on one GPU. The image instruction outperforms text conditioning under a matched comparison, and it supports task agnostic restoration without a degradation label, which the text variant does not.

0.29

Beyond Additive Composition: Interventional Modeling of State-Dependent Cross-Degradation Responses for Composite Image Restoration

cs.CV ·2026-11-18 ·Zongda Tang, Jie Feng, Wenda Zhao, Mingtao Feng, Yuping Liang +2 more
benchmark similarity 0.58
Abstract

Composite image restoration aims to recover images corrupted by multiple coexisting degradations. Existing methods predominantly decompose composite corruptions into individual factors, relying on these isolated priors to guide restoration. However, coexisting degradations are inherently interdependent: the manifestation of one degradation dynamically shifts with the states of others, inducing non-additive interactions that factor-wise paradigms fail to capture. To bridge this gap, we formulate state-dependent cross-degradation responses and propose PROBE, an interventional framework that explicitly models how coexisting degradations influence one another. Specifically, we first construct unified degradation axes by aligning visual and textual degraded-clean offsets. Along these axes, a calibrated coordinate head estimates current degradation states, while bidirectional feature perturbations are injected to probe cross-coordinate responses under the current states. Contrasting these responses with corresponding intensity-matched single-degradation references quantifies intrinsic non-additive deviations, allowing the resulting response descriptors and state coordinates to jointly guide restoration. For comprehensive evaluation, we introduce SCD-15, a new benchmark covering all 15 nonempty combinations of four degradation factors at three severity levels. Experiments demonstrate that PROBE achieves state-of-the-art performance on the CDD-11, AWMM-100K, and SCD-15 composite restoration datasets using a compact model with modest GPU memory requirements.

0.27

Restore What Matters: Lessons from Joint Restoration and Recognition

cs.CV ·2026-09-12 ·Lanqing Guo, Xijun Wang, Minchul Kim, Yu Yuan, Wes Robbins +5 more
similarity 0.58
Abstract

Recognition pipelines typically adopt a restore-then-recognize workflow, yet decades of experience show that generating visually pleasing images seldom translates to improved recognition. We propose a Joint Restoration-for-Recognition (JR$^2$) paradigm: restore only what downstream tasks truly require, with task signals dictating where, how much, and whether restoration is necessary. JR$^2$ rests on three pillars: (i) Physics, employing optics-accurate turbulence simulation, extensible to blur and noise, to ground restoration in real image formation; (ii) Neuroscience, drawing on selective attention and neuroplasticity to direct model capacity toward identity-critical regions and frames while bypassing already-clean inputs; and (iii) Vision & Learning, coupling recognition loss end-to-end through restoration and alignment so that low-level edits maximize high-level identity stability. Evaluations on IARPA-BRIAR show consistent improvements (e.g., TAR@0.01% FAR +0.6; FNIR@1% FPIR -2.5), while a quality gate skips ~70% of clean frames, reducing cost. Ablations confirm physics priors enhance realism, joint training prevents catastrophic forgetting, and selective restoration suffices in many cases. We conclude that better-looking images are neither necessary nor sufficient; restoration modules must be task-driven, selective, and physically aware. Code, pretrained models, and recipes are provided for integration.

0.19

ExplicitIR: Explicit Spatial Policy Fields for All-in-One Image Restoration

cs.CV ·2026-11-17 ·Dezhi Zhang, Shangrong Yang, Yudong Liang, Wenjian Wang
hot direction similarity 0.57
Abstract · 13 pages, 10 figures, 4 tables

All-in-one image restoration aims to recover clean images blindly from inputs with various degradation types and levels using a single model. However, the adaptation policy in most existing methods remains implicitly encoded in feature representations, leaving the restoration decision neither explicitly represented nor independently controllable. Since real-world degradations vary spatially, applying uniform updates across the entire image leads to over-smoothing of clean areas and under-correction of localized degradations. To address these limitations, we present ExplicitIR, which represents the restoration policy as two explicit per-pixel fields: Budget, which determines where and how strongly to update, and Style, which selects between narrow and wide context windows. Specifically, ExplicitIR incorporates a Spatial Policy Estimator (SPE) to predict these fields, explicitly representing the restoration policy and capturing spatially-varying degradations, which are then applied by Policy-Adaptive Decoder Blocks (PADB) through adaptive fusion of narrow- and wide-window responses, enabling independent control and precise local modulation. This design enables spatially-adaptive restoration in a single forward pass, without requiring task labels, prompts, or test-time degradation estimators. Extensive experiments on three-task and five-task benchmarks demonstrate that ExplicitIR achieves performance competitive with the strongest all-in-one baselines.

0.34

Unified RAW Image Exposure Correction and Restoration via Linear Illumination and Frequency-Adaptive Enhancement

cs.CV ·2026-10-20 ·Yingkai Zhang, Yunhao Zou, Ying Fu
benchmarkhot direction similarity 0.57
Abstract

Incorrect exposure degrades both image brightness and recoverable scene detail. Existing sRGB-based correction methods are limited by the non-linear image signal processing pipeline, whereas RAW-based methods are usually developed for a single degradation type, such as low-light denoising or high-light recovery. In this paper, we focus on joint exposure correction and restoration directly in the RAW domain and propose a unified RAW Image Exposure Correction and Restoration (RIECR) framework for both under- and over-exposed images. RIECR decomposes the problem into two coupled sub-problems that follow the RAW imaging model: linear illumination correction and residual degradation restoration. First, a Linear Illumination Correction Network (LICN) estimates exposure-aware linear gains by using channel-specific RAW cues. It exploits the high signal-to-noise ratio of Green channels for robust brightening and the relatively unsaturated Red/Blue responses for high-light darkening. Second, a dual-branch Frequency-based Enhancement Network (FEN) restores the remaining degradation with a Frequency Dynamic Convolution (FDC) module. FDC decomposes convolutional responses into low- and high-frequency components and adaptively suppresses amplified noise or recovers clipped textures according to the exposure context. We further build a real paired RAW benchmark containing 223 scenes and 1,784 pairs covering complex multi-exposure errors. Experiments against sixteen state-of-the-art methods show that RIECR achieves state-of-the-art performance on real RAW exposure correction.

0.29

Think Before You Restore: Risk-Aware Manchu Manuscript Restoration with Stroke-Guided Attention

cs.CV cs.AIcs.LG ·2026-09-28 ·Mingqiu Liang, Dongdong Wang, Siyang Lu, Ting Huang, Yingjun Qi
similarity 0.57
Abstract · Submitted to IEEE ICASSP 2027

Full-page blind restoration of historical Manchu manuscripts is challenging due to scarce annotations, unknown degradation regions, and fragile connected strokes. Generic restoration models may improve visual quality but often modify intact content, leading to over-restoration. We propose SAGE-Restore (Stroke-Aware Gated rEstoration), a selective restoration framework that first assesses where restoration is needed and then uses this assessment to guide restoration candidate generation and pixel-level selection. Its encoder predicts patch-level repair probabilities from complementary appearance and stroke-structural cues to condition restoration candidate generation, while the corresponding repair logits are refined into a pixel-level soft gate that selectively controls where the restoration candidate is applied. We further introduce a fidelity-aware evaluation protocol that jointly measures degraded-region recovery, intact-content preservation, and their balance. SAGE-Restore achieves the highest R-Recovery (0.463) and RFS (0.626), while maintaining high U-Fidelity (0.968), demonstrating an effective balance between restoration and content preservation.

0.22