CS Paper Radar

When Ground-Truth Fidelity Matters: An Orchestrated UAS Framework for Wheat Streak Mosaic Virus Detection Using Vision Transformers and Machine Learning

Dewi Endah Kharismawati, Sandeep Dhakal, Courtney E. McCusker, Jennifer R. Wilson, Erik W. Ohlson, Sami Khanal

cs.CV ·submitted 2026-09-10 19:58 UTC · v1

Abstract

Wheat streak mosaic virus (WSMV) is a destructive pathogen of sweet corn and other cereal crops, causing yield losses and complicating early detection because symptoms are spatially variable and subtle. In sweet corn seed production, WSMV also has regulatory importance, as phytosanitary regulations from countries such as New Zealand and Chile require seed lots to be certified virus-free. Visual scouting is unreliable because symptoms can resemble abiotic stress, while enzyme-linked immunosorbent assay (ELISA) is accurate but expensive, labor-intensive, and difficult to scale. We present an automated pipeline for plant-level WSMV detection using unmanned aircraft systems (UAS) multispectral imagery. The framework integrates orthomosaic reconstruction, geospatial alignment, plant extraction, and classification using a Vision Transformer with seven-channel inputs (five spectral bands, NDVI, and NDRE). Using treatment-based labels, the model achieved 89% accuracy on over 6,500 test patches across multiple growth stages. However, ELISA-based ground truth revealed substantial label noise: only a small fraction of sampled plants in inoculated plots were infected. Treatment labels therefore did not reliably represent infection status, and the high accuracy was largely driven by label bias rather than disease detection. Performance decreased markedly against row-level symptom severity and plant-level ELISA labels. Under these higher-fidelity but smaller-sample conditions, both deep learning and classical machine learning showed limited generalization and weak separability between ELISA-confirmed mock-inoculated and infected plants. These results show that UAS-based disease detection is constrained by label fidelity and data availability, emphasizing biologically grounded labels and models aligned with real-world conditions.

Comment
29 pages, 9 figures, 2 tables. Submitted to Computers and Electronics in Agriculture

Closest papers

Nearest neighbours by meaning across the whole index.

Precision Cotton Disease Management: Leveraging UAV Imagery and Custom YOLO Deep Learning Framework for Enhanced Detection

cs.CV ·2026-10-16 ·1. Anwar Iqbal*1 aiqbal. rime23smme@student. nust. edu. pk 2. Kunwar Faraz Ahmad Khan1 kunwar. faraz@smme. nust. edu. pk 3. Shahbaz Khan1 shahbaz. khan@smme. nust. edu. pk 4. Khawaja Fahad Iqbal1 fahad. iqbal@smme. nust. edu. pk 5. Sara Ali1, 2 sara. baber@smme. nust. edu. pk 6. Saqib Nazir1 saqib. nazir@smme. nust. edu. pk 7. Muhammad Azhar Javed3 muhammadazhar6231@gmail. com 1 Department of Robotics, Artificial Intelligence, SMME, National University of Science +9 more
similarity 0.69
Abstract

Cotton sustains the textile economies of over 80 countries with an annual yield of 113 million bales, yet 30-60% of yield losses are still attributed to viral, bacterial, and fungal diseases that remain undetected until manual field scouting. To address this critical issue, the integration of Unmanned Aerial Vehicle (UAV) imagery with deep learning offers a scalable early-warning system; however, existing models suffer from low early-stage accuracy, poor transferability, and high computational cost. In this paper, we propose Cotton-Vision, a fully convolutional single-stage detector that synergizes three lightweight architectural innovations: Ghost Bottleneck modules for a 20% parameter reduction, Efficient Channel Attention (ECA) for adaptive feature recalibration, and Cross-Stage Partial (CSP) fusion for enriched gradient flow. The network is trained on a novel dataset collected across seven cotton fields in the Punjab province of Pakistan, comprising over 2,700 high-resolution drone images. Extensive data augmentation (rotation, shear, exposure, and saturation) expands the dataset to 11,704 training samples. On a held-out test set, Cotton-Vision achieves a precision of 97.7%, a recall of 77.7%, an mAP@50 of 85.6%, and an mAP@50-95 of 76.6%. These results represent a 10-20% improvement in precision, recall, and mAP over state-of-the-art baselines, including YOLOv5, YOLOv8, YOLOv11, YOLOv12, RT-DETR, and RF-DETR. Through a comprehensive ablation study, we demonstrate that each proposed architectural enhancement contributes to the model's superior performance, yielding a 12-16% mAP improvement over the baseline architecture. Our findings confirm that this synergy of lightweight and attention-based modules provides a robust, computationally viable solution for early cotton disease detection.

0.21

Combining Object Detection with Geometry-Aware Clustering to Distinguish Overlapping Plants in UAV Imagery

cs.CV ·2026-09-18 ·Ik Jae Lee, Hieu D. Nguyen, Mahbubur Meenar, Carlos Morrison Martinez, Cameron Connelly
similarity 0.64
Abstract · 34 pages

Reliable plant-level information from unmanned aerial vehicle (UAV) imagery is important for automated crop monitoring. However, in dense crop canopies, adjacent plants frequently overlap and are detected as a single object, reducing the reliability of plant-level measurements. This study presents a geometry-aware post-detection framework for resolving overlapping plant instances using standard RGB UAV imagery. The framework combines object detection with geometric clustering of plant components. Leaves or branches detected within each bush-level region are represented using two complementary geometric features: component centroids and radial intersection points (RIPs) derived from detected plant structures. K-means and Gaussian mixture models determine whether a detected region contains a single plant or two overlapping plants. Density filtering suppresses spurious radial intersections, and a post-pipeline ensemble combines spatial and directional geometric information. The framework was evaluated using UAV imagery of eggplant and tomato crops under field conditions. Centroid-based clustering achieved an F1-score of 0.89 for eggplant, while the combined centroid-RIP approach achieved the best tomato performance, with an accuracy of 0.80, precision of 1.00, and F1-score of 0.75 using K-means. Density filtering substantially improved RIP-based clustering for tomato. The proposed approach provides a lightweight, modular engineering solution that can be integrated with existing RGB UAV monitoring pipelines without additional depth sensors, pixel-level segmentation, three-dimensional reconstruction, or retraining of the primary bush detector. The results demonstrate that geometric reasoning applied to existing detector outputs can complement deep-learning-based object detection and improve plant-level interpretation in dense agricultural canopies.

0.27

On the Transferability of Agricultural Weed Detection Under Cross-Field Distribution Shift

cs.CV cs.LG ·2026-08-21 ·Nikhilesh Prabhakar, Pranuthi Tenali, Wilfredo Abudeye Fernandez, Shekhar Borah, Athresh Karanam +3 more
similarity 0.63
Abstract

Accurate agricultural weed detection in real-world field conditions is essential for precision agriculture, enabling targeted intervention and reducing yield loss. Recent work has reported strong detection performance from UAV-based imagery across a range of crops, yet existing approaches evaluate within a single crop and field, leaving practitioners with little evidence that a model trained on one crop will generalize to a new field or crop type. In this work, we characterize where cross-dataset weed-localization performance degrades and which modeling choices recover it, reducing the need to relabel every new deployment field. We introduce a newly collected and annotated UAV image dataset for agricultural weed detection in cotton fields and use it alongside an existing soybean dataset collected under a similar protocol. Using these datasets, we evaluate the performance of several strategies for transferring a detector trained on one crop to another, comparing unsupervised domain adaptive object detection (DAOD) against pretraining on a domain-adjacent source dataset followed by few-shot fine-tuning on the target dataset. Our analysis spans target-domain label budgets from zero to the full target dataset, characterizing the trade-off between adaptation strategy and annotation effort. We find that few-shot fine-tuning with as few as 25 labeled target examples outperforms unsupervised DAOD in our cross-crop comparison, suggesting that source domain selection combined with modest target supervision is more productive than algorithmic sophistication in adaptation.

0.21

BananaVLM: A Domain-Adapted Vision Language Model for Banana Crop Disease Diagnosis

cs.CV q-bio.QM ·2026-08-27 ·Sangam Kumar Jena, Pandarasamy Arjunan
benchmarkcode/data similarity 0.62
Abstract · 11 pages

Banana crop diseases threaten food security across the world, yet field diagnosis remains difficult because of limited expert access and visual similarity among disease classes. We present BananaVLM, a domain-adapted vision-language model for banana disease diagnosis built on LLaVA-v1.5-7B and fine-tuned with Low-Rank Adaptation (LoRA). To address the lack of multimodal agricultural instruction data, we introduce BananaInstruct, an automated pipeline that converts raw disease images into $\approx$80,000 question--answer pairs without manual annotation, using LLaVA-1.5-13B for symptom descriptions and Mistral-7B for agricultural Q&A generation and label grounding. Evaluated against 14 open-source and 5 closed-source VLMs on a nine-class benchmark, BananaVLM achieves 92.21% in-domain and 83.28% out-of-domain (OOD) classification accuracy, outperforming the best closed-source baseline, Gemini~2.5~Pro, by 49.8 and 63.3 percentage points, respectively. Binary healthy/diseased identification reaches 98.38% OOD accuracy with 1.00 recall. A controlled LoRA--DoRA comparison shows that DoRA performance degrades across epochs, while LoRA remains more effective for fine-grained classification. Qualitative evaluation using nine LLM judges yields G-Eval win rates of 0.81--0.96, while five domain experts prefer BananaVLM in 98.48% of 990 blind pairwise comparisons. These results show that lightweight domain adaptation with automated instruction tuning is an effective and scalable approach for specialized agricultural AI. Code, datasets, and model weights are available at https://github.com/samy101/banana-vlm

0.52

Vegetation Health Classification for Low-Data and Edge Hardware Deployment

cs.CV ·2026-11-14 ·Yifei Cheng, Haoyu Li
hot direction similarity 0.62
Abstract

Unmanned aerial vehicles (UAVs) equipped with cameras are popular, viable tools for vegetation and environmental health monitoring. However, existing image classification methods are incompatible with UAV implementation for independent practitioners in remote, resource-constrained environments due to large dataset requirements, GPU hardware, inflexible retraining, and low interpretability. This paper presents a lightweight, interpretable vegetation classification algorithm operating with as few as five reference images per class, without GPUs or heavy machine learning frameworks. It uses a 2D hue-saturation histogram feature representation and Earth Mover's Distance or Quadratic Form Distance, paired with a log-likelihood probability score, to classify images into three vegetation health categories. We evaluated six systems: three custom pipelines and three established models across low-data scenarios ($n = 5, 10, 25$) and a full-data regime of 2,172 drone images from 28 South American locations. Our custom pipelines achieve competitive Top-1 accuracy (81--85\%) under low-data constraints, maintaining sub-1ms inference times that enable real-time classification and subsequently tasks such as seeding and watering. The algorithms also support incremental retraining without full model reconstruction. We validate edge feasibility by deploying the QFD variant on an ESP32 microcontroller, achieving 82.8\% accuracy with 1.01\% heap memory utilization (45kb), demonstrating that effective vegetation classification is achievable on low-cost, low-power embedded hardware without cellular connectivity.

0.28

A100: A Hybrid Vision Foundation Model for Agricultural Plant Image Analysis

cs.CV ·2026-10-16 ·Mayur Pratim Das, Ajai Dubey, Aksshay Mathew P, Sana Afreen, Rishi Kumar Soni +3 more
benchmark similarity 0.62
Abstract · 11 pages, 5 figures, 5 tables

The use of accurate vision models for crop monitoring, disease diagnosis, and plant phenotyping in agriculture is hindered by the lack of expertly annotated data, especially in developing countries. We propose A100, an agricultural vision foundation model that is pre-trained using self-supervised learning on 3 million unlabeled images from fields covering more than 100 crop species. A100 uses a hybrid CNN-Transformer backbone that fuses MBConv stages for local feature extraction with Transformer stages for global contextual representation. A100 uses pre-training with the integration of DINO self-distillation, iBOT masked patch reconstruction, and KoLeo uniformity regularization, resulting in features that are better than ImageNet-12K supervised representations for agricultural applications without any fine-tuning. By utilizing a frozen backbone, the accuracy for crop classification of A100 is 95.37%, which is +2.56% better than ImageNet-12K, and reduces the leaf count error by 10.4% on the GroMo25 phenotyping benchmark, proving that the same backbone can be used for classification and regression tasks. After full fine-tuning, the performance of A100 is 99.90% on 32-class crop identification and 99.02% on 44-class disease detection. On the difficult PlantDoc dataset, A100 outperforms all baselines, such as CvT-13 (64.89% against 63.56%). Remarkably, A100 obtains 98.01% accuracy on plant classification using just 1% of the labelled data (about 284 images per category), showing great label efficiency for use cases with limited labeling. Under an identical protocol, A100 also outperforms the publicly released agricultural foundation models FoMo4Wheat and LeafVision by more than 14 points at 1% labels. We plan to publicly release our pretrained model to allow agricultural professionals to adapt A100 for various plant analysis applications using limited annotations.

0.14

UAV-Based Computer Vision for Cattle Detection and Feed Bunk Spatial Analysis

cs.CV ·2026-11-06 ·Pedro Oliveira Torrente, Diego Giaretta de Paulo, Lucas Pascotti Valem, Jianglong Yan, Everton Castelão Tetila +2 more
similarity 0.61
Abstract · 12 pages, 6 figures, 6 tables. Preprint of paper accepted in IEEE Transactions on AgriFood Electronics

Beef cattle production is central to Brazilian agribusiness and faces growing demands for efficiency, sustainability, and animal welfare. Precision Livestock Farming (PLF) offers tools to address these challenges, particularly through monitoring feeding-related spatial patterns in confined systems. Feeding management plays a decisive role in animal performance, yet its evaluation still relies largely on subjective, labor-intensive visual inspections that are hard to scale and prone to bias. This work proposes a computer vision framework based on Unmanned Aerial Vehicles (UAVs) to quantify cattle alignment and spatial dispersion at the feed bunk under real-world feedlot conditions. A UAV dataset was collected during flight campaigns at a commercial feedlot in Mato Grosso do Sul, Brazil. Images were manually annotated into cattle head and cattle back classes to support object detection and image-level spatial analysis of cattle distribution. You Only Look Once (YOLO) models, namely YOLOv8 and YOLOv11, were evaluated, with YOLOv8 small used for the downstream spatial analysis. The feed bunk region was segmented using the Segment Anything Model (SAM), and geometric metrics based on detected head positions were developed to characterize alignment, spacing regularity, and clustering. The selected detector achieved 84.30% mAP50 and 35.50% mAP50-95, with an inference time of approximately 2.7 ms per image on an NVIDIA RTX 5060 Ti GPU. The resulting metrics distinguished representative regular and irregular spatial distributions by Root Mean Square Deviation - RMSD (1.06 m and 4.26 m), Coefficient of Variation - CV (42.70% and 96.31%), and clustering (0 and 2 clusters), respectively. These findings indicate that the proposed approach can provide indicators for assessing feed bunk spatial patterns in PLF.

0.28

A Comparative Evaluation of Deep Learning Object Detection Models on a Real-World Multi-Plant Dataset from Africa

cs.CV cs.AI ·2026-08-11 ·Ismail Ismail Tijjani, Sunusi Muhammad Ibrahim, Amina Ibrahim Khaleel, Lanre Olusegun Akinola, Fatima Isa Jibrin +3 more
similarity 0.59
Abstract

The application of computer vision in agriculture has shown significant potential for improving crop monitoring and precision farming. However, many existing approaches rely on controlled datasets that do not adequately represent realworld farming conditions, particularly in underrepresented regions such as Africa. This study presents a comparative evaluation of six object detection models YOLOv5, YOLOv8, YOLO11, YOLO26, Faster R-CNN, and RT-DETR using a real-world dataset, AgriAISeg 1 , collected manually from Nigerian farms. AgriAISeg comprises 3,382 images of sesame, cabbage, and tomato crops captured under varying environmental conditions, including changes in illumination, occlusion, and viewing perspectives. Models were trained, and performance was assessed using precision, recall, mAP@0.5, and mAP@0.5:0.95. The results show that RT-DETR achieved the highest overall performance with a precision of 0.768 and mAP@0.5:0.95 of 0.624, while YOLOv8 and YOLO11 also demonstrated strong and consistent performance. In contrast, Faster R-CNN recorded significantly lower accuracy, with an overall mAP@0.5 of 0.466, indicating reduced effectiveness under complex field conditions. In addition, YOLO-based models exhibited superior training efficiency compared to Faster R-CNN.These findings demonstrate that modern one-stage and transformer-based detectors provide more reliable and efficient solutions for plant detection in realworld agricultural environments.

0.04