CS Paper Radar

WISER: Systematic Design-Space Exploration of Trapped Ions with Multiplexed Control

Scott Jones, Song-qing-hao Yang, Prakash Murali

cs.AR quant-ph ·submitted 2026-09-11 21:22 UTC · v2
hot direction

Abstract

Trapped-ion Quantum Charge-Coupled Devices (QCCD) are a leading contender for quantum computing, but their scalability is constrained by control wiring and electronics. Wiring using Integrated Switching Electronics (WISE), a recently proposed QCCD architecture, reduces wiring through multiplexing and integrated switching hardware. However, this leaves an execution model with limited parallelism and limited flexibility in ion movement. Further, these devices need to be paired with a quantum error correction (QEC) code to enable fault-tolerant quantum computation (FTQC). Can WISE architectures efficiently support FTQC requirements? Which QEC choices, device and control parameters are practical? We present WISER, a cross-layer design-space exploration framework for trapped-ion systems with multiplexed control. WISER combines a WISE-specific SAT-based compiler, a physics-informed noise model and logical-memory simulation to estimate logical error rates, logical clock speeds and control power across hardware parameters and QEC families. Its compiler reduces routing time by $2.6$--$18.8\times$ relative to a greedy WISE-compatible baseline. Our analysis provides concrete design guidance. Two-ion traps with $16$-way multiplexing, $8\times$ lower than the original WISE proposal, give the fastest logical clock that meets our reliability and cold-stage power targets. With current hardware parameters, the distance-7 surface code is the only evaluated code to meet our early-FTQC screen, at $4.58\,$Hz and $2.04\,$W of DAC power per logical qubit. At this operating point, ion transport and recooling take $94$--$96\%$ of the WISE cycle, and even without them sample-and-hold electrode charging leaves millisecond-scale syndrome-extraction rounds.

Comment
Version 2, 31 pages, 12 figures, 5 tables

Closest papers

Nearest neighbours by meaning across the whole index.

NAQsim: Full-Stack Architecture Simulation Framework for Fast and Space-Efficient Neutral Atom Quantum Computing

cs.AR quant-ph ·2026-09-13 ·Yosuke Ueno, Shinichi Sunami, Toshihide Hinokuma, Yasunari Suzuki, Akihisa Goban +3 more
top venuebenchmarkcode/data similarity 0.73
Abstract · 18 pages, 20 figures, 4 tables. Accepted to the 59th IEEE/ACM International Symposium on Microarchitecture (MICRO 2026)

Technological advances in neutral-atom platforms have opened a new path toward designing efficient protocols for fault-tolerant quantum computing (FTQC). However, each physical operation is still orders of magnitude slower than on other platforms, such as superconducting qubits. Therefore, architects must identify fast and efficient FTQC architectures, which require reliable modeling tools to explore various design choices across the software, classical hardware, and quantum device stacks of neutral-atom platforms. In this paper, we propose NAQsim, an open-source simulation framework for neutral-atom FTQC architectures based on transversal gates. As its key feature, NAQsim enables detailed full-stack architecture evaluation that opens opportunities to explore previously overlooked performance bottlenecks. As a first use case for NAQsim, we identify one such bottleneck, patch rotations, perform full-stack co-optimization, and finally derive a near-rotation-free architecture (D3-ROT). For practical FTQC benchmark workloads, D3-ROT achieves a 2.27x speedup from this single bottleneck alone, with minimal footprint overhead. These results point to a much broader space of full-stack optimizations that NAQsim makes accessible for transversal surface-code architectures and beyond.

0.52

Architecting Instruction Execution for Scalable Fault-Tolerant Quantum Computing

cs.ET quant-ph ·2026-10-12 ·Dmitry Filippov, Justin Hogaboam, Mathias Soeken, Raghu Gatta, Prakash Murali +1 more
published similarity 0.66
Abstract · Published in IISWC 2026

Scaling fault-tolerant quantum computing (FTQC) requires orchestrating millions of operations continuously across a tightly coupled classical-quantum control stack. A critical challenge in this orchestration is determining the optimal hardware-software boundary, i.e., the Quantum Instruction Set Architecture (QISA). We focus on cryogenic, fixed-connectivity qubit platforms, such as superconducting and topological Majorana qubits. For these, existing QISA choices either operate at too low a level, violating cryogenic thermal budgets at scale, or at too high a level, imposing unrealizable complexity on the control engine. To reason about these tradeoffs, we introduce the ARIES instruction set hierarchy, which categorizes QISAs into distinct abstraction levels. To systematically evaluate these levels, we develop an end-to-end evaluation toolflow featuring a cycle-accurate classical driver and hardware engine simulator. Using eight quantum applications across superconducting and topological qubit platforms, we measure instruction bandwidth, transceiver power dissipation, and measurement processing overheads. We demonstrate that while physical-level abstractions exceed the thermal limits of dilution refrigerators by orders of magnitude, canonical-level abstractions significantly underestimate hardware routing congestion and execution runtimes. Our Level 4 QISA (local logical operations) offers an optimal architectural balance. As quantum hardware platforms scale toward FTQC in the coming years, our findings provide concrete architectural guidance for the design of their classical control stacks and instruction interfaces.

0.24

Do Not Let CNOTs Overwhelm the Decoder: Scheduling Transversal Gates for Fast FTQC

cs.AR quant-ph ·2026-08-12 ·Shota Ikari, Yuga Hirai, Yasunari Suzuki, Hiroshi Nakamura, Yosuke Ueno
similarity 0.66
Abstract · 16 pages, 18 figures, 3 tables

Transversal CNOT (TCNOT) gates can accelerate fault-tolerant quantum computation (FTQC) in the surface code by reducing the number of syndrome extraction rounds required between logical operations from $O(d)$ to $O(1)$. This is particularly attractive for quantum platforms with long-range connectivity, such as neutral atoms. However, dense TCNOT schedules substantially increase the classical decoding workload. TCNOTs propagate errors across multiple surface-code patches, enlarging the spatiotemporal region that must be decoded jointly. Consequently, denser TCNOT schedules increase decoding latency and memory requirements and potentially exceed available decoder capacity. Moreover, because the detector error model (DEM) of each decoding window depends on the TCNOT schedule, exhaustively precomputing all possible window-level DEMs is infeasible, requiring just-in-time (JIT) DEM compilation. Thus, the practical benefit of TCNOT gates is limited not only by quantum hardware performance but also by classical decoding and DEM-compilation capacity. We introduce PACE, a decoder-aware scheduling framework for TCNOT-based FTQC. PACE first mitigates the decoder-side costs of aggressive TCNOT scheduling through three complementary techniques. Hybrid Window Decoding assigns different decoders for each decoding window according to its DEM structure. DEM Stitch generates schedule-specific window-level DEMs just in time by assembling reusable precompiled fragments. Sub-window Parallel Decoding decomposes large windows into smaller sub-windows with graph-coloring formulation. Building on these techniques, PACE then performs decoder-aware scheduling to maximize TCNOT concurrency within the available decoder resources. Our evaluation shows the trade-off between quantum acceleration and classical decoding cost, revealing the limitations of current decoding systems for TCNOT-based FTQC.

0.10

Quantum computers will not be that different: A blueprint for quantum computer architecture at scale

cs.AR quant-phcs.NIeess.SY ·2026-09-17 ·Torsten Hoefler, Matthias Troyer
similarity 0.65
Abstract

Quantum computers are technologically novel and unusual, but at system scale they should be engineered using many of the same principles that govern classical heterogeneous accelerators. This paper argues that utility-scale quantum architecture is primarily a cost-performance problem across a coupled quantum-classical system, leading to a blueprint for scalable quantum processing unit (QPU) design. Our architecture blueprint is organized around clean logical abstractions, hiding details and complexity of physical qubit modalities below the instruction set architecture (ISA) boundary, and specializes recurring functions aggressively to minimize the cost for utility scale quantum computations. Its low-level implementation through specialized local hardware for control, readout, and quantum error correction (QEC) closely resembles the architecture of high-performance network stacks. One of our main insights is that the design principles and the resulting architecture closely follow established practice from classical computing and networking.

0.37

Architecture and Compilation Co-Design for High-Rate Quantum Product Codes on Neutral Atom Arrays

cs.AR quant-ph ·2026-08-20 ·Adrian Liu, Wan-Hsuan Lin, Daniel Bochen Tan, Qian Xu, Jason Cong
similarity 0.64
Abstract · 20 pages, 16 figures

Achieving fault-tolerant quantum computing at a practical scale demands quantum error correction (QEC) codes with high encoding rates. Quantum low-density parity-check (qLDPC) codes emerge as a promising candidate, especially given the rise of neutral atom arrays that provide dynamic long-range connectivity via atom movements. In general, synthesizing valid and efficient physical execution plans for QEC is a provably hard combinatorial problem, forming a critical compilation bottleneck that worsens as code sizes grow. To overcome this complexity, we focus on an important product family of qLDPC codes with dimension-reduction properties, and propose ONEX. This framework decomposes complex 2D physical execution planning into independent 1D subproblems, each solved to optimal execution depth within practical compilation time. First, we formulate the 1D execution plan with an explicit satisfiability modulo theories (SMT) encoding. This protocol produces provably depth-optimal solutions with substantial duration reduction. Second, we develop a multi-stage compilation pipeline featuring anytime optimization, movement compaction, and iterative feedback. This pipeline maintains practical wall-clock times while providing progressive refinement and on-demand retrieval of quality solutions. Third, we evaluate ONEX in the application of hypergraph product (HGP) code memory mapped onto neutral atom arrays, achieving 3.7x to 6.1x and 29.8x to 42.1x higher clock rates than the constructive 1D algorithm and the general 2D compiler, respectively, while scaling efficiently to codes with 2,500 data qubits. Finally, we extend ONEX to zoned layouts, revealing architectural insights into the associated trade-offs, and demonstrate its applicability to the broader lifted-product (LP) code family through a representative example.

0.08

SeQUeNCe.DQC: Full-stack Simulation of Distributed Quantum Computing

cs.NI cs.DCquant-ph ·2026-10-29 ·Sanjay Suresh, Caitao Zhan, Joaquin Chung, Rajkumar Kettimuthu
benchmark similarity 0.63
Abstract · 6 pages, 6 pages

Distributed quantum computing (DQC) connects multiple quantum processing units to overcome the scale limits of monolithic hardware. We introduce SeQUeNCe$.$DQC a new top-level module within the SeQUeNCe package that compiles monolithic circuits into topology-aware execution plans and coordinates their execution using SeQUeNCe's existing quantum-network modules and protocols. We validate SeQUeNCe$.$DQC by reproducing a two-node trapped-ion Grover experiment in simulation and comparing success probabilities with the reported 71% benchmark. We then evaluate how compiler strategy, topology, and memory capacity jointly govern distributed circuit execution time and success rate. In these experiments, our hybrid compilers successfully identified mixed TeleGate/TeleData execution plans that outperformed pure gate-teleportation strategies. By capturing the physical overhead of distributed quantum primitives, SeQUeNCe$.$DQC provides a rigorous platform for co-designing DQC software and hardware architectures.

0.07

QSimAdv: A Late-Bound, Vendor-Agnostic Architecture for High-Performance Quantum-Circuit Simulation

cs.DC quant-ph ·2026-08-11 ·Shusen Liu, Pascal Jahan Elahi, Wenyun Sun, Shenjin Lv, Xiaohan Shan +1 more
similarity 0.63
Abstract · 24 pages

Portability in high-performance quantum-circuit simulation need not begin at the kernel. We present QSimAdv, which makes late binding, rather than a common kernel, the basis of vendor independence. Representation, operator lowering, and data placement are bound only when their required inputs become available. Before full-state allocation, circuit, noise, and output inspection can route eligible generic sampled-count requests to a stabiliser tableau; explicitly requested representations remain fixed. For full-state execution, backend constraints shape fusion; an ordered fused operator binds to a native lowering only after its physical targets are known. A first-class logical-to-physical layout map records non-canonical order across local and rank-address bits, so the dispatcher moves nonlocal targets only on demand. GPU, CPU, and Message Passing Interface (MPI) backends share these semantics while retaining native execution paths. We realize this design on NVIDIA GH200 and AMD MI250X/EPYC systems across local and distributed execution. With matched complex 32-bit floating-point state storage, QSimAdv leads both Aer Hopper configurations at $N=32$ and Aer's HIP backend at four shared MI250X sizes from $N=24$ to 30. Strong scaling exposes platform dependence: on setonix, QSimAdv leads both GPU and CPU comparisons at every measured rank, achieving $3.4\times$ and $2.8\times$ speedups, respectively, from one to eight ranks; neither the GH200 path nor the CPU path speeds up at eight ranks. Weak scaling reaches 256 ranks with 2 TiB GPU and 1 TiB CPU states. Together, these results support that portability can reside above the kernel boundary while execution remains native and extends across distributed memory.

0.10

Mapping Dynamic, Hierarchical Quantum Circuits

cs.PL ·2026-09-08 ·Marouane Benbetka, Merwan Bekkar, Bokyeong Yoon, Riyadh Baghdadi, Martin Kong
published similarity 0.62
Abstract · To appear in the Proceedings of the 2027 International Symposium on Code Generation and Optimization (CGO 2027)

Qubit mapping is a critical pass in quantum compilation. Despite various advances, dynamic circuits, those exhibiting data dependent control-flow, often resulting from qubit measurements, are not yet supported by the vast majority of available qubit mappers. The crucial limitation to overcome is the dependence on flat, one-dimensional representations of circuits. Further, qubit mappers currently lack compiler abstractions that capture the hierarchical nature of circuits, hindering the qubit mapping process. In this paper, 1 we introduce a new qubit mapping method and analyses to tackle hierarchical dynamic circuits. Our novelty resides in four key aspects: modeling (statically) sub-circuits in disjoint control-flow paths, introducing a novel Qubit Reconciliation pass to maintain consistency between sub-circuit and control-flow boundaries, a loop-entry remapping pass, and a refined cost function enhanced for SWAP count, circuit depth, circuit latency and error. We demonstrate the efficiency of our approach on a wide range of dynamic circuits on two monolithic Quantum Processing Units of 127 and 156 qubits, and on chiplet hexagon-based QPUs. On monolithic QPUs, our qubit mapper improves the SWAP count by up to 52%, depth by up to 18%, latency by up to 18.6%, and error by up to 40%. On chiplet architectures, we achieve improvements of up to 36% on SWAP count, 8.7% on depth, 15% on latency, and 15% of error.

0.36