CS Paper Radar

Practical Considerations for Processing Massive Classical Data via Quantum Oracle Sketching

Stefano Markidis

cs.ET quant-ph ·submitted 2026-09-11 21:30 UTC · v1
hot direction

Abstract

Classical-to-quantum I/O is a critical bottleneck for data-intensive quantum workloads. Quantum Oracle Sketching (QOS) has been proposed to address this problem. We identify its practical requirements, including the representation of data as a probability distribution over oracle addresses, the relation between sample count, approximation error, and update cost, and the coherence and runtime support required for online execution. To study QOS on current quantum computing devices, we develop an offline realization that compiles sample blocks into empirical phase oracles and evaluate it using DNA fingerprinting. The application converges with relatively few samples, while exact phase fusion combines repeated updates to the same address. However, the compiled circuits remain too deep for current quantum computing devices. Practical QOS therefore requires lower depth oracle synthesis and interactive quantum runtimes.

Comment
Extended version of manuscript accepted for publication at EuroQHPC2026 workshop at EURO-PAR 2026

Closest papers

Nearest neighbours by meaning across the whole index.

OpenQARP: a modular framework for quantum application research

cs.MS quant-ph ·2026-09-14 ·Stefano Scali, Vicente P. Soloviev, Antonio Márquez Romero, Brian Coyle, Giuseppe Buonaiuto +5 more
code/data similarity 0.68
Abstract · 18 pages, 2 figures, 7 tables

We introduce OpenQARP, the Open Quantum Application Research Package: an open-source Python framework for quantum application research, built on a compiled C++ core. In OpenQARP, an application is assembled from an algorithm library that orchestrates three interchangeable layers: blocks describe circuits, primitives describe what to extract from them, and engines describe how they run. The release spans near-term through fault-tolerant methods, targeting problems from electronic structure to combinatorial optimization, with device-aware compilation, circuit cutting, and resource estimation over a single set of numerical conventions that the code must follow. Every numerical feature is checked against an independent oracle, and every published timing carries a correctness check. Against OpenFermion, Qiskit/Aer, PennyLane/Lightning, Qulacs, qsim, and pytket, OpenQARP is one to two orders of magnitude faster on operator algebra and among the fastest on simulation. It matches mature compilers on two-qubit gate count, and expresses a complete algorithm in the lines a framework needs rather than the plumbing a primitive stack demands.

0.41

SynDebug: A Framework to Debug Logic Bugs in Fault-Tolerant Quantum Computing Programs

cs.ET quant-ph ·2026-10-15 ·Nicholas S. DiBrita, Jack Lange, Tirthak Patel
published similarity 0.67
Abstract · SynDebug will appear at SIGOPS ATC 2026

Fault-tolerant quantum computing (FTQC) introduces substantial systems-level complexity through quantum error correction (QEC), making debugging FTQC programs challenging. Existing quantum debugging approaches primarily target logical-level circuits and do not naturally support debugging within realistic FTQC execution flows. We present SynDebug, the first systems-level debugging framework for FTQC programs. SynDebug introduces lightweight assertion-based debugging primitives that operate directly within encoded FTQC infrastructures while avoiding additional logical surface area and minimizing temporal overhead. We evaluate SynDebug across multiple QEC code families, code distances, and encoded workloads, including state preparation, entanglement validation, and Shor-style programs. Our results demonstrate that SynDebug enables practical FTQC debugging with an average 1.8% additional circuit depth overhead (0% in most cases) and no measurable increase in the logical error rate, showing that systems-level debugging for large-scale FTQC applications is both feasible and practical.

0.30

Turning Quantum Compiler Configuration Selection Upside Down: A Top-Down Paradigm

cs.SE quant-ph ·2026-10-21 ·Ming Zhong, Xiangyu Ren, Kangyu Zheng, Zhi Zeng, Shenggen Zheng +2 more
benchmark similarity 0.66
Abstract · 16 pages, 9 figures, 9 tables

Selecting an effective quantum compiler configuration requires coordinated decisions over both hardware targets and compiler settings, with the ultimate goal of improving circuit execution fidelity. Existing SOTA approaches typically decompose this problem into two sequential stages: a device is chosen first, after which compiler options are tuned on that device through RL-based search. This bottom-up strategy can be fundamentally limited by its initial device decision, since a poorly matched backend may constrain the best fidelity achievable regardless of how effectively later compiler options are optimized. In contrast to classical compiler tuning, where the search space is often prohibitively large, the configuration space of quantum compilers remains manageable enough to support exhaustive search. Consequently, rather than repeatedly searching from candidate configurations, one can derive reusable configuration knowledge from offline oracle results and apply it directly to new circuits. In this paper, we introduce a top-down configuration-selection paradigm and build QuOPTBench, an exhaustively searched benchmark containing oracle configurations for 268 quantum circuits. We first study whether LLMs can directly infer suitable configurations and evaluate ten representative LLMs. The results reveal that vanilla LLMs remain far from the oracle. We then employ an LLM to extract transferable rules from sampled circuits governing configuration selection. Using these rules together with predictors trained on the enumerated configuration data of the sampled circuits, we design QuTOP, a rule-guided ML framework that performs fast configuration selection without iterative online search. Across our evaluation, the distilled rules consistently strengthen LLM-based selection, while QuTOP provides the strongest overall balance between solution quality and selection latency among the baselines.

0.10

Hardware Fingerprinting FTQC via Quantum Decoder Timing

cs.CR ·2026-09-10 ·Friedrich Doku, Jakub Szefer, Kaitlin N. Smith
similarity 0.65
Abstract

As the quantum computing field transitions toward Fault-Tolerant Quantum Computing (FTQC), intensive efforts are focused on scaling architectures and realizing active error correction. However, this shift introduces security surfaces that remain largely unexplored. Fault-tolerant quantum computers pair a quantum processor with a classical decoder that sits on the critical path of every syndrome-extraction round. For the first time, this work demonstrates that the wall-clock time each decoder takes to process a syndrome measurement and decoding round constitutes a novel, exploitable hardware side channel on physical quantum hardware. Using per-shot decoder timings from three IBM Heron processors collected over a 68-day window, the decode-time distribution alone allows a passive observer to (i) reconstruct the shot-by-shot detector-firing distribution and estimate the workload's logical error rate $p_L$, (ii) infer the code distance in use, and (iii) fingerprint the specific physical device with up to 89% accuracy (a random guess is 33%), with a pooled two-sample Kolmogorov-Smirnov test confirming the decode-time distributions are statistically distinct. In noisy simulation inspired by public data from Google's 105-qubit Willow processor, decoder timing further distinguishes 9 surface-code patches at different locations on the chip with 81% accuracy, showing the side channel persists on below-threshold fault-tolerant hardware from a different vendor and code family.

0.23

MagiCFirm: A Runtime for Magic-State Cultivation with Algorithm-Hardware Co-Design

cs.AR quant-phcs.DC ·2026-09-24 ·Jubo Xu, Abbas B. Ziad, Prakash Murali, Hongxiang Fan
code/data similarity 0.64
Abstract

Magic-state cultivation offers a promising alternative for lowering the cost of non-Clifford operations in fault-tolerant quantum computing (FTQC). However, realizing cultivation in practice exposes two challenges: (i) the lack of an open-source classical runtime layer between logical software and physical control, and (ii) the latency constraints on protocol-specific decisions that determine magic-state readiness. To address these challenges, we adopt an algorithm--hardware co-design approach. At the algorithm level, we develop a two-stage early-escape scheme that identifies an informative subset of detectors offline, constructs a compact decoding problem, and performs partial decoding in parallel with complete decoding at runtime, allowing high-confidence attempts to advance before full decoding completes. At the hardware level, we present MagiCFirm, a configurable runtime that combines offline-compiled microprograms with dedicated datapaths for detector construction, event processing, and protocol control, enabling end-to-end execution of magic-state cultivation. Across evaluated configurations, MagiCFirm reduces wall-clock magic-state preparation time by up to 39.3% at matched logical error rate. For a representative magic-state-bound workload, this translates to an estimated 11% reduction in overall application runtime.

0.20

SeQUeNCe.DQC: Full-stack Simulation of Distributed Quantum Computing

cs.NI cs.DCquant-ph ·2026-10-29 ·Sanjay Suresh, Caitao Zhan, Joaquin Chung, Rajkumar Kettimuthu
benchmark similarity 0.64
Abstract · 6 pages, 6 pages

Distributed quantum computing (DQC) connects multiple quantum processing units to overcome the scale limits of monolithic hardware. We introduce SeQUeNCe$.$DQC a new top-level module within the SeQUeNCe package that compiles monolithic circuits into topology-aware execution plans and coordinates their execution using SeQUeNCe's existing quantum-network modules and protocols. We validate SeQUeNCe$.$DQC by reproducing a two-node trapped-ion Grover experiment in simulation and comparing success probabilities with the reported 71% benchmark. We then evaluate how compiler strategy, topology, and memory capacity jointly govern distributed circuit execution time and success rate. In these experiments, our hybrid compilers successfully identified mixed TeleGate/TeleData execution plans that outperformed pure gate-teleportation strategies. By capturing the physical overhead of distributed quantum primitives, SeQUeNCe$.$DQC provides a rigorous platform for co-designing DQC software and hardware architectures.

0.07

QuSema: Detecting Silent Bugs in Quantum Libraries via Quantum-knowledge-enhanced Agents

cs.SE cs.AIquant-ph ·2026-10-07 ·Yujin Song, Kaining Zhang, Qixin Zhang, Shuai Wang, Pingchuan Ma +1 more
benchmark similarity 0.63
Abstract

Quantum libraries are now critical infrastructure for quantum algorithm development, yet their correctness remains difficult to test. Existing testing techniques mainly rely on failure-based or comparison-based oracles, exposing bugs only when executions fail, violate runtime checks, or disagree with another implementation. Their applicability is limited when suitable execution-based oracles are unavailable, leaving some silent bugs undetected. Such missed bugs can produce incorrect results that propagate into experimental conclusions, simulation studies, and algorithmic designs. Here we present QuSema, an autonomous testing agent for finding silent bugs in quantum libraries. QuSema uses constraints from quantum semantics and documentation as a source-level semantic oracle to assess whether implementation logic can produce invalid outputs from valid inputs. It operates through an agentic loop that repeatedly inspects library API documentation and source code, reasons about the intended behavior of quantum operations, identifies potential semantic deviations, and validates them by generating executable tests through library APIs. Guided by quantum-domain reasoning, QuSema turns high-level behavioral mismatches into concrete, user-triggerable bug reports, enabling it to uncover non-crash defects. We implement QuSema for Qiskit and PennyLane. On a benchmark of 20 historical silent bugs, QuSema achieves higher mean bug relocation counts than Claude Code and Codex, with the DeepSeek configuration costing less than Claude Code. QuSema also discovers 40 previously unknown bugs confirmed by the developers, including 30 silent bugs.

0.04

Do Not Let CNOTs Overwhelm the Decoder: Scheduling Transversal Gates for Fast FTQC

cs.AR quant-ph ·2026-08-12 ·Shota Ikari, Yuga Hirai, Yasunari Suzuki, Hiroshi Nakamura, Yosuke Ueno
similarity 0.62
Abstract · 16 pages, 18 figures, 3 tables

Transversal CNOT (TCNOT) gates can accelerate fault-tolerant quantum computation (FTQC) in the surface code by reducing the number of syndrome extraction rounds required between logical operations from $O(d)$ to $O(1)$. This is particularly attractive for quantum platforms with long-range connectivity, such as neutral atoms. However, dense TCNOT schedules substantially increase the classical decoding workload. TCNOTs propagate errors across multiple surface-code patches, enlarging the spatiotemporal region that must be decoded jointly. Consequently, denser TCNOT schedules increase decoding latency and memory requirements and potentially exceed available decoder capacity. Moreover, because the detector error model (DEM) of each decoding window depends on the TCNOT schedule, exhaustively precomputing all possible window-level DEMs is infeasible, requiring just-in-time (JIT) DEM compilation. Thus, the practical benefit of TCNOT gates is limited not only by quantum hardware performance but also by classical decoding and DEM-compilation capacity. We introduce PACE, a decoder-aware scheduling framework for TCNOT-based FTQC. PACE first mitigates the decoder-side costs of aggressive TCNOT scheduling through three complementary techniques. Hybrid Window Decoding assigns different decoders for each decoding window according to its DEM structure. DEM Stitch generates schedule-specific window-level DEMs just in time by assembling reusable precompiled fragments. Sub-window Parallel Decoding decomposes large windows into smaller sub-windows with graph-coloring formulation. Building on these techniques, PACE then performs decoder-aware scheduling to maximize TCNOT concurrency within the available decoder resources. Our evaluation shows the trade-off between quantum acceleration and classical decoding cost, revealing the limitations of current decoding systems for TCNOT-based FTQC.

0.10