CS Paper Radar

Real-World Deployment and Performance Characterisation of Fog-Based Deep Learning for Cold-Chain Temperature Prediction over LoRaWAN

Jeremiah Taguta, Jean Frederic Isingizwe Nturambirwe, Clement Nthambazale Nyirenda

cs.DC cs.LG ·submitted 2026-09-12 16:43 UTC · v2

Abstract

Fresh fruits and vegetables (FFVs) are highly perishable, and cold-chain breaks contribute significantly to global food waste. While Machine Learning (ML) can enable proactive intervention, cloud-based inference faces challenges such as latency and data loss. Fog computing addresses these issues but has been tested only in simulation for FFV cold-chain temperature prediction. To the best of the authors' knowledge, this paper presents its first real-world deployment. A fog-deployed LSTM-GRU model predicted cold-room temperature using LoRaWAN sensor data collected from a South African apple cold-storage facility with induced cold-chain breaks. Running entirely on a Raspberry Pi 4 with no cloud dependency, the system generated conditional SHAP explanations only when a break is predicted. The deployed system predicts cold-room temperature with an MAE of 0.2°C at roughly 0.2 kWh per day ($\approx 0.7$ Wh per prediction). Predictions were delivered in under one second (555 ms), dominated by network and messaging rather than computation, with conditional explanations adding modest cost. SHAP consumes 28% more CPU but is well within the hardware's capacity. The model attributes its predictions primarily to temperature, humidity, and their interaction. Critically, the deployment surfaced what simulation cannot: a sensor-triggered single point of failure, alongside genuine resilience, autonomous recovery from infrastructure faults and continued operation through internet loss. These are the first published deployment benchmarks for fog-based temperature prediction in FFV cold chains, establishing that explainable temperature forecasting is feasible on resource-constrained edge hardware. Future work includes asynchronous sensor fusion, commercial cold chain deployment, alternative model architectures, and causal analysis.

Comment
7 pages, 4 figures

Closest papers

Nearest neighbours by meaning across the whole index.

XGBoost "is all you need": the case of forecasting transmitted heat energy in District Heating Systems

cs.LG eess.SY ·2026-08-11 ·Milan Zdravković
published similarity 0.67
Abstract · 9 pages, 7 figures. This preprint corresponds to the paper published in Lecture Notes in Networks and Systems, vol. 860 (ICIST 2024), Spring…

This paper presents a comparative study of two distinct approaches, XGBoost and Long-Short Term Memory (LSTM), for forecasting transmitted heat energy in District Heating Systems (DHS). The objective is to explore scenarios in which conventional ML algorithms demonstrate better performance over deep learning networks in time series forecasting and the associated benefits in terms of computational cost and environmental impact. The study focuses on a real-world DHS dataset. Through experimentation and analysis, it is demonstrated that XGBoost consistently outperforms LSTM in this specific forecasting task. The difference is explained by the error distribution illustrating that LSTM makes more significant errors in the intervals of less data availability. The reduced computational demands of conventional ML approaches not only result in cost savings but also minimize the carbon footprint associated with data analysis tasks in energy systems.

0.65

Seamless Deployment of Machine Learning Inference at the Far Edge: An Empirical AWS IoT Greengrass Architecture for Industrial Predictive Maintenance

cs.DC cs.AI ·2026-10-10 ·Prince Kwabena Appiah Boadu, Jeffery Baafi Kyei, Enoch Kofi Koranteng, Griffth Selorm Klogo
top venuehot direction similarity 0.59
Abstract · Conference paper draft in IEEE format, with code appendices. Already accepted in AiBThings - IEEE 4th International Conference on Artificial…

Industrial IoT sensors produce continuous, high-volume data streams that predictive maintenance needs to analyse in real time. Cloud-centric architectures send all raw telemetry to central servers, which costs latency, bandwidth and resilience. This paper presents a hybrid cloud-edge architecture for manufacturing predictive maintenance built on AWS IoT Core and AWS IoT Greengrass v2, with local machine learning inference at the edge and selective cloud synchronization. We deploy two configurations on real AWS infrastructure and compare them: a cloud-only baseline (Configuration A) and the proposed hybrid edge architecture (Configuration B). We measure end-to-end inference latency, bandwidth consumption and inference accuracy. Configuration B cuts cloud-bound bandwidth by 86.8% (63.6 KB to 7.2 KB per 200-reading window) and decision latency by 256x (23.1 ms cloud round trip to 0.09 ms local inference). At the edge, with no cloud involvement, it keeps an anomaly-class F1 score of 0.84 and 91% recall. The evaluation also instruments system uptime and Stream Manager queuing under cloud disconnection; the quantitative disconnection experiment is left as planned work. Our review of the literature points to four gaps that this work addresses: the lack of empirically validated Greengrass v2 deployments for predictive maintenance, unquantified bandwidth savings from selective edge synchronization, unmeasured resilience under cloud disconnection, and the open MLOps feedback loop at the edge.

0.44

Towards a Cloud Fog Edge System for Smart Building

cs.DC cs.LG ·2026-10-01 ·Christophe Cérin, Mamadou Sow, Frédéric Andrès
similarity 0.57
Abstract

In this article, we present our vision and recent advancements toward creating a decentralized system capable of learning from real-time data within buildings to support sustainable and privacy-preserving smart environments. Our approach promotes the concept of the building itself as the data center, aligning with the principles of edge computing to safeguard confidentiality and reduce reliance on external cloud infrastructure. This is particularly valuable in humanitarian contexts, where data sovereignty, energy efficiency, and infrastructure constraints are critical. We detail a lightweight, "Kubernetes-like" orchestration framework for deploying AI services within such environments and demonstrate our progress in implementing AI algorithms on low-power, cost-effective microcontrollers such as those in the Arduino ecosystem. By enabling in-situ learning directly on sensors or microcontrollers, our work aims to bring intelligent services to resource-limited settings, fostering autonomy, resilience, and sustainable development in vulnerable or underserved communities. The contributions in this article are related, firstly, to our project "Online Machine Learning Algorithms for Embedded Systems" and the evaluation of two new online algorithms. Secondly, we envision a cloud-fog-edge architecture based on the KOptim and FIWARE components, and we propose a methodology for coupling them. Experimental results of the online algorithms are also presented, showcasing real-world traces.

0.17

Multi-Step Forecasting of Grape Berry Temperature based on LSTM Model with Feed-Forward Attention

cs.AI ·2026-08-29 ·Srikanth Gorthi, L. G. Divyanth, Dattatray Bhalekar, Markus Keller, Lav Khot
benchmark similarity 0.55
Abstract

Accurate forecasting of grape berry temperature (Tb) is essential for enabling timely heat stress management in vineyards. In this study, a feed-forward attention mechanism integrated with a Long Short-Term Memory network (FAM-LSTM) was developed and evaluated for multi-step, high-resolution Tb prediction. Models were trained using environmental data from 2023 and 2024 at Prosser, WA, USA, and validated on 2025 summer data. FAM-LSTM was benchmarked against LSTM, GRU, RNN, and Random Forest (RF) across horizons ranging from 15 minutes to 72 hours (288 time steps). Two input scenarios were evaluated: nearest open-field weather station observations and in-vineyard microclimate measurements. FAM-LSTM consistently outperformed all benchmark models across all horizons and input scenarios. Incorporating in-vineyard microclimate data significantly improved forecasting accuracy at longer horizons. Using open-field data, FAM-LSTM achieved MAE and RMSE ranges of 0.58 to 1.70 deg C and 0.65 to 2.07 deg C, respectively. In-vineyard observations further improved performance, with MAE and RMSE in the ranges of 0.51 to 1.55 deg C and 0.71 to 1.87 deg C. Error analysis showed prediction uncertainty was highest during peak daytime periods (11:00 to 18:00) and increased progressively with forecast horizon. Overall, the FAM-LSTM framework offers robust Tb forecasting to support precision heat stress management in vineyards.

0.49

Predicting Train Delays in Finland Using Machine Learning and Weather Data

cs.AI cs.LG ·2026-09-10 ·Vinicius Pozzobon Borin, Jean Michel de Souza Sant'Ana, Nurul Huda Mahmood
published similarity 0.55
Abstract · 6 pages, 3 Figures, 4 tables, presented at Wireless Europe 2026, Rimini, Italy, June 2026

Reliable railway operations depend increasingly on real-time environmental intelligence delivered through wireless sensor infrastructures, a capability that 6G networks will substantially enhance through integrated sensing and edge computing. Adverse weather, particularly in Arctic regions with extreme temperatures and heavy precipitation, remains a leading cause of train delays, yet most prediction approaches rely on raw meteorological inputs without exploiting domain-informed feature engineering. This paper investigates machine learning for train delay prediction using the Finland Integrated Train-Weather (FI-TW) dataset, which fuses railway operational records with observations from the Finnish Meteorological Institute's nationwide sensor network of approximately 200 stations communicating over wireless links. We evaluate three feature configurations using XGBoost at Oulu central station (101,146 observations): full weather features, instant weather observations only, and derived weather category scenarios. The category-based approach, employing hierarchical classifications such as Blizzard, Heavy Snow, and Extreme Cold, achieved an R^2 of 0.78, root mean squared error of 8.5 minutes, and mean absolute error of 3.7 minutes, representing an 11% R^2 improvement and 10% error reduction over alternative configurations. These results demonstrate that compact, domain-informed features derived from sensor streams outperform raw meteorological observations, offering bandwidth-efficient representations suitable for edge deployment over current and emerging wireless infrastructures.

0.42

From Nowcasting to Forecasting: Adapting a Reanalysis-Trained

cs.LG physics.ao-ph ·2026-09-03 ·Mikko Partio, Leila Hieta, Ossi Laine
similarity 0.55
Abstract

Accurate cloud-cover forecasts are important for temperature prediction, radiation forecasting, and solar-power operations. Short-range forecasting methods can preserve observed cloud placement during the first forecast hours, but their skill decreases when cloud fields evolve through formation, dissipation and deformation. Longer lead times require accounting for atmospheric evolution, but operational numerical weather prediction (NWP) forecasts may not accurately represent the satellite-observed cloud state at initialization. We develop CloudCast v2, a machine-learning model for 12-hour cloud-cover forecasting from observation-based initial conditions. The model is first trained on the Copernicus European Regional Reanalysis (Ridal2024) to learn cloud-evolution dynamics, and is then adapted to satellite-derived cloud fields using conditional flow matching (Lipman2023), a generative method that transforms noise into cloud-cover forecasts conditioned on the observed initial cloud fields and NWP inputs. CloudCast v2 reduces mean absolute error by 10% relative to its predecessor, CloudCast v1 (Partio2025), over the 1-12 h range. It also overtakes CloudCast v1 in fractions skill score, a neighborhood-based measure of spatial agreement, after approximately 3-6 h, depending on the cloudiness category. These results show that observation-initialized machine-learning forecasts can extend beyond the usual 1-3-hour nowcasting range while retaining spatial detail from satellite cloud fields.

0.24

AgriDefend: A $205 Offline Edge Device that Detects Crop Stress Before Visible Symptoms via Multimodal AI Fusion

cs.LG eess.SP ·2026-10-26 ·George Xu, Nikhil Vincent, Elizabeth S. Forbes
similarity 0.55
Abstract · 3 pages, 3 figures

Most in-field crop-monitoring devices sense a single modality -- either a camera looking at the canopy or a probe reading the soil -- and so cannot detect stress that begins below ground before it becomes visible above it. We present AgriDefend, a self-contained consumer-grade edge device that fuses both. A MobileNetV2 convolutional neural network (CNN) analyses canopy imagery, and a Random Forest classifier integrates trend features from a single soil probe: moisture, the rate of change in pH and in N, P, K, and belowground CO2 relative to ambient (a proxy for soil respiration). A logistic-regression meta-learner fuses the two into a five-class crop-health prediction, all on a Raspberry Pi 5 with no cloud or cellular link. On a controlled greenhouse drought trial with wild radish, the fused model reached 87% accuracy (R^2=0.88, MAE=0.05) at 1.4 s INT8 TensorFlow Lite inference, and its soil signals preceded visible wilting by about four days. The complete bill of materials is $205, roughly a fifth of comparable commercial nodes, positioning multimodal, sustainable crop sensing as a practical consumer-electronics product for connectivity-limited settings.

0.14

Air Quality Station Simulation via LSTM and Attention-Based Modelling

cs.LG ·2026-08-12 ·Alexander Kostadinov, Petar O. Hristov, Dessislava Petrova-Antonova
benchmark similarity 0.54
Abstract · Preprint prepared as an extension to the conference article at https://doi.org/10.1007/978-3-031-97313-0_20, which describes some features o…

Poor air quality in urban areas is driven by a complex chain of processes and presents a significant public health concern. To better understand and control the mechanisms that determine air quality, cities deploy networks of measurement stations, and launch initiatives for collecting denser data about the concentration of pollutants in the atmosphere. Extracting insights from the stations relies on their reliable and uninterrupted operation. However, hardware is susceptible to faults and black- outs that may result in data unavailability, which affects the overall quality of analyses. In this paper, we present a deep-learning model, called SATADL, which can infer complex relations and output multiple-hour-ahead air-quality forecasts. The goal of the model is to simulate the mea- surements of an unresponsive station until its operation is restored. The architecture of the model, which allows it to extract information from different aspects of the data, is described in detail and a careful examination of all of its components is provided. We demonstrate the performance of SATADL on four sets of air quality stations from around the world, by using it to simulate the concentration of PM10 for periods of hypothetical failures of one of the measurement stations, lasting for as long as 48 hours. A selection of baseline and published deep learning models were trained and used as a benchmark. The results show that SATADL per- forms better across different prediction windows, for both coefficient of determination and root mean squared error, demonstrating its suitability as a virtual proxy station.

0.17