CS Paper Radar

A High-Throughput FPGA Architecture for Real-Time TCP-SYN Scan Detection

Faisal Saeed, Mohammad Fahad, Ayesha Javaid, Christian Doerr, Muhammad Ali Siddiqi

cs.CR cs.AR ·submitted 2026-09-12 16:53 UTC · v1

Abstract

TCP-SYN port scanning often precedes cyber-attacks, and early detection of scanner fingerprints embedded in packet headers can provide timely intrusion alerts. Existing approaches are either too computationally expensive for line-rate operation or limited to offline analysis. This brief presents a lightweight FPGA architecture for reconfigurable line-rate fingerprint detection, where each fingerprint is compiled into a shallow Boolean LUT tree, enabling parallel evaluation with constant two-cycle latency regardless of fingerprint count, while resource cost grows linearly with fingerprint count. This detection core is decoupled from a MAC-layer frontend that performs streaming field extraction with no frame buffering or higher-layer state, allowing deployment across different line rates by modifying only the frontend. A Python framework automatically compiles Boolean expressions into synthesizable HDL, eliminating manual RTL changes. For TCP-SYN port-scan fingerprint detection, the architecture uses approximately 0.5% LUTs at 10 Gbps on a Versal VCK190 for 18 deployed fingerprints, with capacity for over 2,000 concurrent fingerprints, and under 2.5% on a Virtex-6 at 1 Gbps, with a detection latency of 10 ns at both rates, three to four orders of magnitude below typical per-packet processing latency in software intrusion-detection systems. The system was cross-validated against a software re-implementation on an 8-hour production packet trace, confirming detection correctness with zero false positives/negatives.

Closest papers

Nearest neighbours by meaning across the whole index.

FSNIC: A Low-Latency Flow-Based Intrusion Detection Architecture for FPGA SmartNICs

cs.AR ·2026-09-14 ·Nise O'Cuill, Changhong Li, Georgios Floros, Shreejith Shanker
published similarity 0.58
Abstract · Accepted by ICECS'26

Modern data centres require high-performance networking alongside effective real-time security. Traditional Intrusion Detection Systems (IDS) commonly rely on general-purpose processors and often struggle to inspect high-speed traffic at line rate without introducing latency or performance bottlenecks. Smart Network Interface Cards (NICs) provide an alternative by enabling computation directly within the network data plane. This work presents a machine learning-based IDS implemented within an FPGA-based SmartNIC pipeline. The system integrates P4-based packet parsing with a LogicNets IDS model implemented in RTL, enabling deterministic, low-latency inference. Compared with traditional stateless packet-level classifiers, the proposed stateful flow-based IDS introduces minimal state by aggregating features across packets, capturing behavioural patterns not observable at the packet level. Experimental results on the UNSW-NB15 dataset show that the flow-based IDS improves detection accuracy from 86.92\% to 97.68\% compared with stateless packet-level classification. We also evaluate the proposed IDS on CICIDS2017 and compare its real-time hardware performance with prior FPGA-based IDS designs. Through hardware-software co-design, the proposed IDS achieves 6~ns inference latency using only 846 LUTs, with no BRAM or DSP usage, demonstrating a low latency and resource efficient implementation.

0.44

Dryas: A Reprogrammable Engine for High-Speed Interconnect Tracing and Analysis

cs.AR eess.SP ·2026-08-13 ·Manuel Bröchin, Tom Kuchler, Michael Giardino, David Cock, Timothy Roscoe
code/data similarity 0.55
Abstract · 12 pages, 12 figures

The proliferation of heterogeneous components in modern computing systems has been accompanied by new higher bandwidth and lower latency interconnects. These interfaces and protocols are enormously complex and the process of developing, debugging, and analyzing FPGA-based implementations requires significant engineering work. Moreover, once a functional implementation is completed, optimization of the controller and associated software requires processing potentially hundreds of gigabytes of trace data. In this paper, we present Dryas, an open source tool for analyzing such an interconnect. We developed our tool, using minimal hardware resources, alongside an FPGA implementation of a very high speed, low latency (30~GiB/s, 200~ns) interconnect. With our run-time reprogrammable overlay engine we can inspect this interconnect to find rare, complex, or transient events even at full operation. This filtering engine is based on non-deterministic finite automata (NFAs), efficiently implemented using state transition elements (STEs), allowing us to trace events at a cache-line granularity. Moreover we can change the filters in less than a second, without reprogramming the FPGA or interfering with the running application. This data enables not only debugging the implementation of the interconnect itself, but analyzing the behavior of accelerated applications. We examine the mathematical basis for using NFAs and describe their implementation on a real coherent CPU-FPGA research platform. We then evaluate the scalability of Dryas for various size NFAs, followed by two different use cases: debugging FPGA implementation of the interconnect and analyzing cache behavior.

0.26

Revisiting Handcrafted Minutiae Detection: A Simple and Effective Open Source Baseline for Modern Fingerprint Workflows

cs.CV ·2026-10-08 ·Raffaele Cappelli
code/data similarity 0.55
Abstract

Handcrafted minutiae detection algorithms remain fundamental to biometric science and forensic practice due to their full auditability, adherence to international standards, and operational independence from training datasets or GPU hardware. However, current open-source traditional baselines are severely outdated, relying almost exclusively on legacy C/C++ codebases that lack seamless integration with modern scientific software ecosystems. To bridge this gap, the present work introduces SBMEX (Skeleton-Based Minutiae EXtraction), a fast and deterministic minutiae detection method integrated into the open source \texttt{pyfing} package. SBMEX achieves high computational throughput by employing a dual Look-Up Table architecture that replaces runtime neighborhood scanning during Crossing Number computation and skeleton tracking. Additionally, it incorporates a continuous quality scoring framework driven by tracking path length, dual ridge-valley skeleton fusion, and spatial density decay. Rigorous evaluation on NIST SD302 datasets demonstrates that SBMEX delivers feature extraction accuracy comparable to or outperforming traditional open-source baselines without fine-tuning, while achieving a drastic reduction in minutiae detection latency relative to classical Crossing Number Python implementations.

0.28

Machine Learning Optimization for Enhanced OS Fingerprinting

cs.LG ·2026-10-08 ·Jae Sung Kim, Spencer Ekeroth, Jeremy Neale
similarity 0.55
Abstract · 7 pages, 2 figures, 1 table

Operating System (OS) Fingerprinting is a technique that can be used to identify a network's operating systems by evaluating network traffic in the form of TCP/IP packets. This research will explore the effectiveness of passively identifying operating systems on the CIC-IDS2017 dataset, a collection of over 47 gigabytes of pcap files with their corresponding operating systems. This research also proposes a new command line interface, OsirisML, which uses nPrint to preprocess the data into tabular data and XGBoost to apply ML to the data to generate, retrain, and test ML models. When packets are split randomly between training and testing, OsirisML models reach an accuracy of 97.66% on a down-sampled subset of the Friday capture and 84.69% on the entire capture. On the entire Monday capture, which contains no attacks, OsirisML reaches an accuracy of 73.83% and an F-1 score of 79.38%.

0.26

ESL-former: Event Sparse Linear Transformer for FPGA-Accelerated Malware Detection

cs.AR ·2026-10-14 ·Jun Yang, Yumeng Cao, Yingxuan Xiao, Changhong Li, Shangru Zhou
published similarity 0.53
Abstract · Accepted at ICA3PP 2026. 19 pages, 5 figures

Transformer based intrusion detection has shown strong potential for identifying unknown malware variants, but its deployment on resource constrained edge devices remains difficult due to the high computational and memory cost of self attention. This paper presents an event sparse Linear Transformer framework for malware detection on FPGA edge platforms. Instead of relying on an explicit attention matrix, the proposed method derives token and channel importance directly from the accumulated key value state of Linear Transformer. A contribution aware scoring function is introduced to measure the perturbation of each token or kernel channel to the linear attention state, allowing redundant tokens and low contribution channels to be removed without constructing quadratic attention maps. To translate sparsity into practical hardware acceleration, the proposed design further replaces conventional binary mask based execution with a Top K active token buffer and a hardware compaction unit. The selected active tokens and channels are reorganized into dense fixed length data streams, enabling downstream processing elements to execute regular multiply accumulate operations with reduced redundant memory access and control overhead. This design is suitable for low power FPGA based malware detection, where both latency and on chip resource usage are critical. Experimental evaluation demonstrates that the proposed sparse Linear Transformer can reduce hardware cost while preserving malware classification accuracy.

0.40

High Speed Network Processing for Scientific Computing in the Open Cloud Testbed

cs.NI cs.DC ·2026-10-05 ·Miriam Leeser, Michael Zink, Suranga Handagala, Carlos Ruben Dell'Aquila, Verena Martinez Outschoorn +1 more
published similarity 0.52
Abstract · Paper accepted to the Twelfth International Workshop on Heterogeneous High-performance Reconfigurable Computing (H2RC'26) Held in conjunctio…

This paper presents an FPGA-based SmartNIC architecture designed to address critical network challenges in data-intensive scientific computing. As scientific workflows increasingly demand high-bandwidth data movement and real-time monitoring across wide-area networks, the Open Cloud Testbed (OCT) provides an ideal platform for investigating in-network processing solutions at line rate. Our approach focuses on implementing network visibility, optimization, and orchestration capabilities through FPGA acceleration. The proposed system leverages P4-programmable data-plane functions to support packet parsing, marking, telemetry extraction, traffic steering, and machine learning inference, all without requiring host CPU intervention or modifications to application servers. As a concrete example, our framework integrates the SciTags standard, which enables associating network traffic with scientific context through packet marking. We implement a high-performance network bridge that counts packets by their SciTag values, as identified in the IPv6 Flow Label. Experimental evaluation on AMD U280 FPGAs in OCT demonstrates the feasibility of this approach, showing imperceptible processing latency and line-rate packet handling, while accurately monitoring scientific data flows.

0.22

XNET: Intelligent Dynamic Sampling for High-Speed Network Security Monitoring

cs.CR cs.NI ·2026-08-18 ·Thomas Papastergiou, Karthika Subramani, Joseph Reilly, Boladji Vinny Adjibi, Pierros-Christos Skafidas +2 more
similarity 0.52
Abstract · 18 pages, 10 figures and 4 tables

Growing network speeds, with 100GbE line rates becoming common in modern enterprise networks, pose challenges to operators and security applications, as they struggle to scale their operational efficiency accordingly, without relying on costly hardware, excessive sampling, or complex distributed deployments. Unintentional loss due to stochastic packet sampling often produces low-quality traffic, further risking missed detection of critical security incidents, particularly those hidden in typically low-rate traffic, such as APT/malware command-and-control communications. In this paper, we introduce XNET, a system that monitors traffic at line rate using commodity hardware and applies dynamic sampling to amplify the visibility of high security value traffic. XNET leverages Linux's XDP technology to process packets efficiently, classify them based on their security value, and sample them as per configured policies. The outcome is a reduced packet stream in which the security-relevant portion of the traffic is amplified at the expense of less interesting traffic segments. XNET is a highly flexible, scalable and dynamic system that can be adapted based on a network's needs. We deployed XNET in a large real-world network using only commodity hardware, where our results show that XNET can achieve up to 84% traffic reduction with no packet loss while increasing the visibility of otherwise negligible traffic fivefold. With controlled stress tests, we further demonstrate XNET's scalability up to 100Gbps. Additionally, we show that XNET sampling led to a detection rate of 99.6% in an IDS application.

0.31

Adaptive Traffic Camouflage: Causal and Resource-Aware Defense Against IoT Fingerprinting

cs.CR cs.NI ·2026-09-22 ·Daniel Adu Worae, Spyridon Mastorakis, Nuno Moniz, Nitesh V. Chawla
similarity 0.51
Abstract

Encryption hides IoT payloads, but traffic shape can still reveal device identity through packet sizes, timing, direction, and packetization. We present Adaptive Traffic Camouflage, a causal, leakage-aware controller that characterizes traffic-shape leakage without runtime device labels and selects a budget-feasible transformation for the next traffic window from previous-window context. The controller chooses among padding, packet splitting, timing, and composite transformations, or leaves traffic unchanged when camouflage is unnecessary. We evaluate the design on CIC-IoT-2022, IoT Sentinel, and UNSW using classical and sequence-based fingerprinting models under clean-trained, defense-aware, and incremental-exposure settings, with fixed, random, and mean-bandwidth-matched baselines. Under the Balanced profile, camouflage reduces mean Macro-F1 by 13.2-23.3% relative to clean traffic with 4.88-7.47% average bandwidth overhead and at most 0.64 ms added latency. Under the larger Privacy profile, the reduction increases to 28.0-43.5%. Defense-aware training recovers much of the lost attacker performance on CIC-IoT-2022 and UNSW, while IoT Sentinel retains a substantial privacy gap. A non-causal same-window reference provides only modest additional benefit over previous-window control, and metadata-rich attackers remain effective outside the targeted traffic-shape surface. These results show that causal, resource-aware camouflage can reduce IoT traffic-shape fingerprintability under explicit communication constraints, while the persistence of protection depends on how readily the defended distribution can be learned.

0.35