CS Paper Radar

Quantifying Observable High-Frequency Swapping on Arbitrum

Shijian Chen, Ya Chen, Jing Cai, Catherine Liu

cs.CR cs.CE ·submitted 2026-09-13 12:41 UTC · v1
survey

Abstract

Layer-2 rollups have reshaped Ethereum's transaction economy by replacing mempool competition with deterministic sequencing, sub-second block times, and negligible gas fees. While these properties suppress classical Miner/Maximal Extractable Value (MEV), they give rise to a new and previously unrecognized behavioral regime. In this paper, we introduce the concept of High-Frequency Swapping (HFS), referring to continuous single-hop swaps at machine cadence within decentralized exchanges. Despite its growing footprint, this phenomenon has not been systematically identified or quantified in prior work. We conduct a large-scale measurement of HFS on Arbitrum, using 18 months of full-chain data (Jan. 2023--Jun. 2024). Specifically, we construct a reproducible pipeline that isolates voluntary single-swap transactions, attributes them to the swapper level, and classifies HFS behavior through inter-arrival dynamics. The analysis uncovers 477 distinct HFS swappers responsible for nearly 30 million swaps and over $10^{11}$ USD in notional volume. Our study conducts a comprehensive empirical investigation of HFS from multiple perspectives. We begin with a global overview of activity patterns, and then examine temporal dynamics, swapper identity, token coverage, and venue concentration, and explore swap size, time gap, and order direction. Finally, we explore case-level behavior, including stablecoin arbitrage, CEX-DEX execution gaps, and short-horizon round-trip trading. Across these dimensions, we identify consistent structural regularities that distinguish HFS from conventional retail or arbitrage activity. This work provides a large-scale address-level empirical characterization of High-Frequency Swapping on Arbitrum and a broad empirical foundation for future research on decentralized market microstructure.

Closest papers

Nearest neighbours by meaning across the whole index.

Fuji: The Shape, Composition, and Spread of Demand Bursts on Robinhood Chain

cs.SI econ.EMq-fin.TR ·2026-10-26 ·Pranay Anchuri
similarity 0.58
Abstract · 25 pages, 8 figures

Demand on blockchain-based marketplaces arrives in bursts and at a high rate. On these platforms the data are completely visible, which makes it feasible to compare the bursty demand against the usual load. The congestion manifests as an increased demand for gas, the primary resource a blockchain sells. Existing studies consider how to price the gas. The demand itself, and what it is made of during bursts, has not been measured. We measure it on Robinhood Chain, a layer-2 blockchain that quickly became a venue for trading tokenized equities and memecoins. We collected the data from every block of its first three active months and more than 50 million Uniswap swaps that occurred during bursty periods. We find that a burst trades about as many pools as a quiet period, mostly different ones, and trades them harder, on top of elevated demand that accumulated for hours. With the bursts aligned on their peaks, the median peak is 2.5 times the usual load. Both the rise and the fall of the demand are described by the sum of two exponential functions with different timescales, a slow one of hours and a fast one of minutes. Against a matched quiet period, a burst has 1.05 times the pools, 1.40 times the trades, and 1.21 times the senders. We use two models to explain the arrival of bursts: externally triggered cascades and self-excitation. The former fits the data relatively better. Inside a burst, the entry of each trader into a pool is followed for about 24 seconds by more entries than the existing traders predict. Whether this is because of imitation or because of a shared signal is left open.

0.29

Breaking Cycles for Scalable Fair Ordering in Blockchain Systems

cs.DC ·2026-09-01 ·Jinchun He, Wangjie Qiu, Yizhong Liu, Shengda Zhuo, Kwok-Yan Lam
similarity 0.57
Abstract

In blockchain systems, transaction order directly determines financial outcomes: unfair ordering enables front-running and sandwich attacks that have extracted over \$686M from Ethereum users. Current fair-ordering protocols aggregate pairwise receive-order evidence from replicas. Under contention or adversarial manipulation, however, Condorcet cycles force them into global strongly connected component (SCC) condensation, causing delays, coarse batches, and scaling failures. We present FlashOrder, a deterministic fair-ordering engine that localizes cyclic ambiguity before it propagates across the batch. FlashOrder embeds pairwise preferences into one-dimensional canonical positions, clusters nearby transactions with a partition hypergraph, and performs hierarchical inter- and intra-cluster serialization, replacing batch-wide SCC condensation with localized sorting and aggregation. Evaluated against Themis (CCS '23) and Rashnu (VLDB '24) on a libhotstuff-based prototype, FlashOrder achieves up to 10.5$\times$ higher throughput than Themis and 4.8$\times$ higher than Rashnu, with the latency gap widening as network scales. In controlled adversarial simulation, it reduces maximum rank displacement by 88.7\%, and under Condorcet attacks it sustains 12.0$\times$ and 9.7$\times$ higher throughput than Themis and Rashnu on average. These results show that localizing cyclic ambiguity yields stronger fairness at substantially higher throughput.

0.18

An Empirical Study of Undisclosed Charges in Hook-Based Decentralized Exchanges

cs.CR ·2026-10-27 ·Kai Ma, Tianle Sun, Shun Zhou, Boyao Yang, Ningyu He +1 more
similarity 0.56
Abstract · 12 pages, 9 figures, 5 tables

Many decentralized exchanges use automated market makers (AMMs) to trade assets against liquidity pools. Modern AMMs allow third-party contracts, called Hooks, to customize this process. However, Hooks can impose additional deductions that fee breakdowns based on standard pool parameters do not itemize. We present, to the best of our knowledge, the first large-scale empirical study of the production Hook ecosystem, focusing on these undisclosed settlement charges. Our study covers 7,873 Hook deployments, 50,011 pools, and 296M pool events on Uniswap v4 and PancakeSwap Infinity across Ethereum and BNB Smart Chain (BSC) through August 1, 2026. We develop a bytecode analysis that reconstructs how Hooks change traders' payments and receipts, separating charges from exchanged assets and standard fees. We then reconstruct historical settlements to measure charging frequency and economic burden. We find that direct settlement adjustment is the dominant Hook capability, supported by 71.37% of registered Hooks. Charging capability is widespread and often exercised: 24.30% of Hooks can impose undisclosed deductions, and these deductions occur in 59.23% of accounted swaps involving such Hooks. These charges generate millions of dollars in revenue, with $3.97M recorded across Hooks with available token prices. These findings reveal a gap between standard fee displays and actual trading costs, motivating explicit disclosure of Hook deductions alongside standard fees.

0.39

Packets, Transactions and Queues: Design Principles for HFT Systems from a Measurement Study of CME Market Data

cs.DC q-fin.TRcs.PFq-fin.ST ·2026-09-26 ·Vincent Maciejewski
code/data similarity 0.55
Abstract · 123 pages, 36 figures, 31 tables. Code in the Kaspar-HFT repository (https://github.com/vincent212/kaspar-hft)

HFT systems are conventionally built as a single-threaded event loop, on the rule that every thread hop adds latency. We test that rule against a measurement study of more than a year of CME market data for the NQ front-month contract, following every packet and matching-engine transaction through the feed's two exchange timestamps, and checking the results against a live production receiver. Packets arrive in near-critical self-exciting clusters that belong to the matching engine's transactions, not to how the exchange packs them. The engine often processes consecutive transactions within a fraction of a microsecond, while the market-data publisher sends at most one packet per publisher period of about 7.5 microseconds, so a burst reaches the receiver as a train of packets one period apart. This yields design principles for HFT systems. First, a receiver that handles each packet within one publisher period never queues on arrivals, however bursty the market; there one thread is best. Second, above that period a queueing tail appears, driven by the timing of transactions, not by packet rate or size, and two threads can be better than one: splitting the servicing chain into two stages on separate threads removes most of the tail at the cost of one hop on the median. Third, only the slowest stage matters, so a split pays only if it shortens it. Fourth, just under the period, where the production receiver runs, the remaining tail comes from multi-message packets and variable service times, and the levers are cost per message and spread of service, not thread count. An analytic framework, a burst-limit throughput identity and an exact reduction of the tandem to a single bottleneck server, supports these results.

0.40

ETH-TraceBench: A Large-Scale Event-Stream Benchmark for Ethereum DeFi under Temporal, Protocol, and Contract Shift

cs.LG ·2026-09-20 ·Kemal Kirtac, Carsten Maple
benchmark similarity 0.51
Abstract · 30 pages. Under review at Transactions on Machine Learning Research (TMLR)

Ethereum decentralized finance (DeFi) provides a public, time-stamped record of transaction-level event streams, but the same public symbols can create strong machine-learning shortcuts. We introduce ETH-TraceBench, a benchmark for evaluating Ethereum DeFi representations under temporal, protocol, pool/infrastructure, and symbolic shift. The raw event universe covers January 2021-December 2025 and contains 1.35 billion transactions with logs and 5.01 billion raw log rows. Model evaluation uses a fixed 911,267-instance supervised sample, training on 2021-2024, selecting models on 2025H1, and testing on 2025H2. Simple models perform strongly on the aggregate temporal test: TraceStats-GB reaches 0.953 macro-F1 and TopicEmitterHashMLP 0.959 on the canonical DEX test set. Performance drops sharply under protocol novelty, with macro-F1 of 0.794, 0.743, and 0.766 for TraceStats-GB, TopicEmitterTrace-SGD, and TopicEmitterHashMLP, while strict unseen-pool scores remain 0.927, 0.897, and 0.935. Uniswap v4 and Ekubo v1, both absent from supervised training, are materially harder than the full test. Jointly masking emitter and topic identity reduces DEX macro-F1 to 0.916 and liquidation macro-F1 to 0.774 for TopicEmitterTrace-SGD. A standard Transformer over log-index-ordered events provides no consistent advantage over a deterministic shuffle of the same events, indicating that high aggregate scores can arise without sophisticated chronological modeling. A natural-prevalence audit estimates 2025H2 DEX prevalence among logged Ethereum transactions at about 22.5%, and a deterministic 400-transaction audit finds complete agreement with task label sources and independently re-queried raw-log counts. ETH-TraceBench therefore treats difficult transfer and controlled-input conditions, rather than a single aggregate score, as the main evaluation target.

0.30

Capital Costs Protect the Network: Mining Gap Dynamics in Proof-of-Work Blockchains Under a Stochastic Mempool

cs.CR ·2026-10-15 ·Hasan Selçuk Kılıç, Nail Akar
similarity 0.51
Abstract · 52 pages, 10 figures

Proof-of-Work blockchains increasingly rely on transaction fees to keep miners engaged as block subsidies decline. An immediate outcome of this is that miners may sit idle at the start of a round until enough high-fee transactions accumulate in order to make mining worthwhile. This idle period is known as the mining gap. We model the high-fee transaction backlog as a Lindley-type recursion under a two-tier fee market and use its stationary distribution to characterize the mining gap. Under Bitcoin's difficulty-adjustment mechanism, the expected gap grows strictly with the hashpower active on the network and consumes the entire round as that hashpower grows without bound. A free-entry condition determines a unique long-run equilibrium hashpower. Capital cost caps the equilibrium hashpower and prevents the mining gap from occupying the entire round. We further characterize how the block subsidy, transaction fees, and operating cost shape the equilibrium hashpower and the mining gap.

0.26

More Meters or More Prices? One- vs. Multi-dimensional Fee Mechanisms on Ethereum

cs.GT ·2026-10-24 ·Fei Wu, Maria Inês Silva, Stefanos Leonardos, Carmine Ventre
similarity 0.50
Abstract

Permissionless blockchains use transaction fee mechanisms to allocate the resources that transactions consume, such as execution, data bandwidth, and state creation. Recent blockchain designs explore pricing these resources separately rather than through a single unit. We study this shift on Ethereum, whose roadmap moves in stages from a one-dimensional fee mechanism to a multi-dimensional one. We build a demand model for the three resources, calibrated from Ethereum's 2025 block-capacity increases, and find that state creation is the most price-responsive. We then evaluate both mechanisms at higher block capacity, combining the model with transaction-level metering reconstruction and block-level simulation. Under a one-dimensional mechanism, state creation determines the fee and suppresses execution throughput. Adjusting how state is metered can align resource usage under constant demand, but a single fee cannot track all resources when demand varies, leaving all underutilized. A multi-dimensional mechanism removes this fee coupling, but execution still generates data that must be propagated. Across different allocations between block execution and propagation time, the multi-dimensional mechanism delivers 4--34\% more execution throughput at similarly low congestion, with higher target utilization and state growth near its intended level.

0.27

Active Liquidity On Chain: Evidence from PropAMMs Across Chains

cs.CE ·2026-09-29 ·Ozan Solmaz, Lioba Heimbach, Jason Milionis
similarity 0.50
Abstract

The liquidity providers of most typical automated market makers (AMMs) are passive and known to suffer from adverse selection. AMMs traditionally rely on trades executed on them to sync the price with external markets (and a notion of fair value thereof). As a result, when an external fair value moves, arbitrageurs trade on AMMs to pick off their stale quotes. A recent approach termed proprietary automated market makers (propAMMs) emerged as a response in 2024: these on-chain programs instead have their singular operator quote from its own inventory, repricing without a trade via efficiently provided price updates. By 2026, propAMMs accounted for more than half of SOL/USDC volume on Solana. We present the first year-long longitudinal measurement of propAMMs on Solana, Base and Monad, and decode the on-chain logic of the dominant propAMM on Base. We find that two seconds after a fill, propAMMs earn 0.37 bps on Solana and 1.19 bps on Base, while AMMs lose 0.22 and 0.62 bps. We empirically quantify and classify their edge as stemming from four factors: propAMMs continuously reprice rather than waiting for a trade, they charge for the source-dependent risk each counterparty might bring, they avoid cross-venue arbitrage from other on-chain markets (such as other AMMs), and they spoof by filling trades at a worse price than they quote. Finally, we show that on our proxy for retail flow (i.e., fills that arrive when the reference price is not moving) propAMMs collect 0.26 bps on Solana where AMMs collect 2.59 bps, indicating that they offer better prices for short-term uninformed flow.

0.26