CS Paper Radar

Bring Buttons Back: Physical Interfaces for the Age of Automation

David Goedicke, Donald Degraen, Tom Igoe, David Sirkin, Wendy Ju, Stefan Schneegass

cs.HC ·submitted 2026-09-13 17:30 UTC · v1

Abstract

As AI starts to permeate everyday life, deployment focuses on embedding intelligence in the background, abstracting away controls, and leaving automated decision-making opaque, with few obvious opportunities for human intervention. Where interfaces remain, design has drifted toward abstract, screen-based control, replacing material interaction with menu navigation. These shifts weaken the coupling between human action and system state, eroding operators' ability to understand, anticipate, and intervene in automated systems. We introduce Physically Stateful Interfaces (PSIs), a design concept that re-imagines traditional controls, such as buttons, switches, and knobs, as actuated, bidirectional interface elements. Three foundational behaviors, Self/Reset, Resist/Hide, and Assert/Unhide, unify affordance, feedforward, and feedback into a single interaction point. Rather than static inputs whose impact and consequences must be read elsewhere on a screen, PSIs position physical controls as shared mediators between automated systems and human operators. As automated systems become increasingly capable, their interfaces need to be deliberately designed to center human agency, supporting deliberate choice while keeping automation legible, contestable, and overrideable.

Comment
6 Pages, 7 figures, article

Closest papers

Nearest neighbours by meaning across the whole index.

From Seeing to Acting: Smart Glasses as First-Person Intelligence Platforms

cs.CV ·2026-08-25 ·Jiangning Zhang, Haojun Chen, Yong Liu
surveycode/data similarity 0.62
Abstract · Project at https://github.com/zhangzjn/awesome-smart-glasses

Smart glasses are evolving from capture and display accessories into first-person intelligence platforms that connect human perception, persistent context, and digital or physical action. Their on-body viewpoint aligns with the wearer's vision, audition, motion, and hand-object interaction, but must operate under tight energy, thermal, privacy, and feedback constraints. Despite rapid progress in augmented reality, egocentric vision, multimodal models, human-computer interaction, and embodied intelligence, the literature remains fragmented across devices, tasks, and benchmarks. \textit{The key challenge is not whether a model can recognize, answer, remember, or act in isolation, but whether a complete system can sustain a reliable, temporally valid, correctable, and governable perception-state-interaction-action loop.} This survey is \textit{the \textbf{first} to systematically study smart glasses through such a unified framework}. We formalize first-person data flow and constrained task utility, characterize devices along eight verifiable hardware capability axes, organize the literature around seven interdependent foundational capabilities, and introduce an L0-L5 framework spanning capture, reactive perception, contextual assistance, persistent state, governed action, and embodied coupling. Across nine application scenes, we connect tasks with datasets, systems, products, stakeholders, failure consequences, and evidence gaps. We further present a nine-dimensional deployment framework, a claim-conditioned evaluation protocol, and an evidence ladder from controlled measurement to longitudinal field validation and audit. Together, these elements make smart glasses more comparable, deployable, and reproducibly evaluated, while outlining a roadmap toward trustworthy first-person intelligence.

0.27

Multimodal Embodied Agents: A Unified Capability-centric Perspective from Computer-Use to Robot-Use

cs.RO cs.AIcs.CVcs.MA+1 ·2026-10-21 ·Yanzhe Chen, Ziyi Yang, Jifeng Zhu, Qiming Huang, Ruihe An +12 more
similarity 0.59
Abstract · Project website: https://showlab.github.io/Awesome-Multimodal-Embodied-Agent/

Multimodal agents (MMAs) sustain interaction through reasoning, memory, tools, and feedback, most visibly as computer-use agents, while robotic systems (RSs) couple sensing and actuation under physical dynamics. We define multimodal embodied agents (MMEAs) as goal-directed systems that couple multimodal task reasoning with physical action and revise decisions from the resulting feedback. This raises a central question: what changes when a multimodal agent moves from computer-use to robot-use? We introduce PAPAV, a unified capability-centric framework of five recurring functions: Perceive the current state, Anticipate action effects, Plan a feasible course, Act through an interface or body, and Verify the outcome. Defined by function rather than architecture, these capabilities let PAPAV identify what all three share and then compare MMEAs with MMAs and with RSs. Five physical constraints, from partial observability to unverifiable outcomes, leave fewer choices fixed in advance and less room to reverse errors. Across 64 benchmarks, explicit evaluation centers on Act; only 5 assess Anticipate and 3 assess Verify, leaving both largely hidden behind task success. These constraints also frame the open challenges we identify. PAPAV therefore provides a common basis for designing reliable physical agents and measuring progress across all five capabilities rather than task success alone.

0.37

Computer-Use Agents Are Embodied Generalists

cs.LG cs.RO ·2026-11-06 ·Pranjal Aggarwal, Sean Welleck
position similarity 0.59
Abstract · 14 pages, 3 figures, 2 tables

In many areas of AI, general-purpose models have increasingly replaced handcrafted methods and specialized architectures. We argue that embodied AI is poised for a similar shift. Our key claim is that embodied tasks can be formulated as interaction with digital software. Specifically, we build software that renders an agent's view of a physical environment on a screen and provides controls for acting in it. A computer-use agent (CUA) can then perform embodied tasks through the same screenshots and keyboard and mouse actions that it uses to operate ordinary software. Using a single CUA design and changing only the software, our entries win first-, second-, third-, and sixth-place prizes across four ECCV workshop competitions, without any competition-specific agent tuning. These results suggest that the skills CUAs learn on software, such as visual grounding, precise clicking, and exploration, already carry over to embodied tasks, giving CUAs a far broader scope in embodied AI than previously realized. We therefore advocate that computer-use agents can be embodied generalists. Further, we advocate that, by following the training strategy that made computer-use agents general, embodied AI can converge on a single general model as well, ushering in a new era of general embodied AI. Website: https://pranjal2041.github.io/cua-embodied

0.23

Touching Projected Agents through the DAT Screen -System Design and Questions of Interaction Boundaries-

cs.HC cs.ARcs.ROeess.SY ·2026-11-02 ·Takaya Tamamoto, Tomoko Yonezawa
similarity 0.58
Abstract · The 2nd International Workshop on Trust and Blame in Multi-Person Multi-Agent Societies (TBSA_2nd) in conjunction with HAI 2026, 4 pages, 4 …

Touching a virtual agent involves more than detecting a finger on a display: the contact surface can deform and resist the user's push, and the agent can respond to that action. We describe the Desktop Amid Touch (DAT) screen, which combines spatial projection onto a semi-transparent, deformable mesh with touch sensing and motorized control of resistance to indentation. An initial prototype detected a single touch and estimated its position and depth from tension changes around a flexible projection screen. A subsequent prototype added motorized tension control to vary the screen's resistance to indentation. We describe the tension-controlled DAT implementation and its demonstrations, distinguishing what has been observed from what remains an open design question. These capabilities raise a design question: should touchable virtual agents respond as though they had preferences or boundaries, and under what conditions should such behavior be implemented on systems like DAT. The present paper describes a system and frames this question; it does not establish how users interpret an agent's refusal or consent.

0.31

From Wearable Interfaces to Dexterous Policies: Contact Shifts and Tactile Representations

cs.RO ·2026-10-06 ·Ruitong Tian, Fang Xu, Noah B. Wilson, Xianyao Li, Eric Jing Du
similarity 0.58
Abstract · 8 pages, 6 figures

Unlike conventional teleoperation, wearable interfaces allow operators to collect dexterous demonstrations through their own hand motions while directly interacting with task objects. This direct interaction reduces dependence on the target robot during collection, but it also makes the collection hardware part of the physical process that generates each demonstration. Interface geometry can influence both how a task is performed and what tactile observations are recorded for learning. We study two versions of a DexUMI-family exoskeleton that share the same robot command definition, mapping procedure, and tactile module type but differ in hand-side geometry. The revised interface reduces reported physical demand, improves selected device ratings, enables tactile access in a precision grasp that is mechanically blocked by the baseline, and produces task-dependent changes in recorded contact. Lid twisting primarily exhibits a change in contact location, whereas egg carton opening primarily exhibits a change in contact occurrence. We then train matched policies using either a binary aggregate input or a spatial-plus-force input. On lid twisting and egg carton opening, policies trained on revised-interface demonstrations achieve higher success than those trained on baseline demonstrations, with a significant pooled interface effect. Across these and two additional tasks, USB insertion and soldering tool pick and place, the spatial-plus-force input likewise outperforms binary aggregation. These results show that wearable collection hardware is part of the data-generation process for robot learning. Such interfaces should therefore be evaluated not only through operator experience, but also through the tactile interactions they make recordable and the policy performance their demonstrations support.

0.19

RoboQuest: Generalist Physical Agents that Search, Inspect and Test

cs.RO cs.AIcs.CV ·2026-10-07 ·Liu Renhang, Navonil Majumder, Tej Deep Pala, Soujanya Poria
benchmark similarity 0.58
Abstract

Recent advances in multimodal foundation models have made them capable generalist physical agents for a range of manipulation tasks. However, successful operation in an unfamiliar environment may require an agent to seek task-relevant information through interaction when it is absent from the observations: it may need to determine where a relevant object is, inspect an unobserved property, or discover the effect of an unfamiliar tool. We thus introduce RoboQuest, a benchmark for goal-directed embodied exploration, where agents must actively acquire task-relevant information through physical interaction, use the resulting evidence to adapt subsequent actions, and autonomously decide when to commit to task completion. RoboQuest comprises ten mobile manipulation tasks centered on three forms of uncertainty: search, manipulation-based inspection, and interactive testing. We evaluate five frontier multimodal agents through a common visuomotor interface, as well as a $π_{0.5}$ policy fine-tuned on the full-episode demonstrations we release. The best agent succeeds in only 23\% of the episodes, and the fine-tuned policy almost never succeeds. Isolated tests of the execution skills the tasks are built from, with the hidden information supplied, show that the agents can carry out most of the required actions, and our failure analysis attributes only a minority of the failures to execution. Our failure analysis further finds that the agents often stop exploring too early as they make decisions before observing the required evidence for task completion. We also find that agents rarely prevent or repair the disturbances caused by their exploration. Moreover, learning by trial and error remains difficult for most models.

0.20

Words to World: Benchmarking LLMs in Interactive Physical Environments

cs.AI ·2026-10-10 ·Xinnan Dai, Kaiqi Yang, Yaxin Li, Cheng Luo, Wanli Li +7 more
benchmark similarity 0.58
Abstract

Words are increasingly becoming an interface for action: large language models (LLMs) can now invoke tools, operate devices, and make decisions that affect the physical world. However, current benchmarks largely evaluate LLMs through static text responses, offline tool calls, or simulated tasks, leaving open the question of how well they can act in real physical environments. We present a benchmark for measuring LLMs in closed-loop physical interaction, where models control a harness system connected to real-world components including robotic arms, cameras, and sensors. In each task, the model must issue instructions, receive physical feedback from the environment, interpret the resulting state, and adapt its next action accordingly. This setting evaluates capabilities beyond language understanding, including grounded perception, action planning, tool selection, spatial reasoning, feedback-driven correction, and robustness to execution uncertainty. Through experiments with representative LLMs, we characterize their ability to translate linguistic reasoning into physical actions and identify common failure modes such as hallucinated state changes, poor recovery from unexpected outcomes, and unstable long-horizon plans. Our benchmark aims to provide a systematic foundation for evaluating LLMs as interactive agents that connect words, tools, and the physical world.

0.17

AI Smart Glasses for Wearable Intelligence: From Egocentric Sensing to Agentic Personalization

cs.CV ·2026-09-17 ·Xu Yuan, Yi Wang, Zhuohang Jiang, Haohao Qu, Yujuan Ding +6 more
survey similarity 0.57
Abstract

Recent advances in artificial intelligence (AI) are reshaping smart glasses from egocentric capture and display devices into platforms for wearable intelligence. Smart glasses increasingly serve as wearable AI systems that connect first-person observation with real-time assistance under strict form-factor constraints. We frame this transition through the lens of \emph{AI smart glasses} and define them as a system-level concept in which egocentric sensing, resource-aware computing, intelligent reasoning, multimodal interaction, and real-world application constraints are co-designed for personalized assistance in the physical world. To systematically study this perspective, we organize the survey around four connected dimensions. First, we examine the hardware foundation that bounds sensing, computation, feedback delivery, and sustained deployment. Second, we study wearable intelligence, where egocentric signals are transformed into perceptual, contextual, and agentic capabilities. Third, we discuss interaction design, through which users request, receive, correct, and regulate assistance during ongoing activity. Fourth, we analyze application scenarios across healthcare, accessibility, situated learning, daily life assistance, cultural tourism, and industrial support, showing how domain requirements reshape system design and evaluation. We further identify five cross-cutting research challenges for future AI smart glasses: next-generation hardware, trustworthy egocentric intelligence, lifelong personalized memory, proactive intelligence, and embodied foundation models. By centering smart glasses as wearable-intelligence platforms, this survey provides a unified framework for organizing technologies, applications, and open challenges in this emerging area.

0.30