CS Paper Radar

PC$^2$-AD: Point Cloud Upsampling to Safeguard 3D Anomaly Detection with Resolution-constrained Edge Devices

Yutong Gu, Yingxi Xie, Kejin Huang, Jian Ning, Hanzhe Liang, Linlin Shen, Jinbao Wang

cs.CV ·submitted 2026-09-13 18:29 UTC · v1
code/data

Abstract

Low-cost and low-resolution sensors used in edge deployments can produce test point clouds that are substantially sparser than the normal training data. This train-test sampling-resolution gap changes the local geometry available to a 3D anomaly detector. We propose PC$^2$-AD, a point cloud upsampling framework that compensates sparse test inputs before downstream detection. Target Domain Candidate Generation (TCG) adapts a pretrained upsampler to normal training geometry and generates a dense candidate pool. Geometry-Aware Candidate Filtering (GACF) selects candidates according to geometric spacing and spatial coverage. Normality-Preserving Point Compensation (NPPC) refines the selection by comparing candidate normality scores with those of their input anchors. The selected points are combined with the unchanged input points and processed by the existing detector. Experiments with six detectors on two Anomaly-ShapeNet settings and Real3D-AD show improvements in the mean of object-level and point-level AUROC for all six detectors in each Anomaly-ShapeNet setting and four on Real3D-AD. These results support point cloud compensation as an input-level approach to improving 3D anomaly detection under low-resolution sensing conditions. Code is publicly available at https://github.com/gyutong406-commits/PC2-AD.

Comment
17 pages, including 6 pages of supplementary material. Code: https://github.com/gyutong406-commits/PC2-AD

Closest papers

Nearest neighbours by meaning across the whole index.

Register Anything Model for Generalizable and Robust Point Cloud Registration

cs.CV ·2026-10-20 ·Zheng Qin, Junhua Xi, Yan Huang, Jiahong Lai, Anwen Huang +3 more
top venuecode/data similarity 0.66
Abstract · Accepted by NeurIPS 2026. Code and models are available at https://github.com/qinzheng93/RegisterAnything

We present Register Anything Model (RAM), a unified model for generalizable 3D point cloud registration that robustly estimates 6-DoF transformations across diverse domains spanning sensors and environments. Existing registration methods are typically tailored to a single domain, with carefully tuned architectures and hyperparameters, and thus degrade markedly when applied to novel domains. We bridge this gap by training a single model on diverse data from indoor, outdoor, and object domains. A central challenge is the severe geometric discrepancy across domains, i.e., differences in scene scale, sensor noise, point density, and structural patterns, which hinders processing with a unified point-based model. To address this, we introduce a geometry-aware normalization strategy that jointly voxelizes and normalizes point clouds into a standardized geometric space, adaptively based on their geometric properties to preserve salient local structures while standardizing resolution. Built on this normalization, RAM follows a hierarchical coarse-to-fine paradigm, and employs an efficient geometric transformer that models local geometric consistency instead of globally over all points. This design mitigates discretization noise introduced by voxelization, and improves computational efficiency. Extensive experiments on 12 benchmarks demonstrate state-of-the-art performance in terms of inlier ratio and registration recall. Notably, our method outperforms the counterparts trained on each separate domain, showing superior generalization capability.

0.42

Provisioning Robust and Efficient LiDAR Perception for Autonomous Driving

cs.CV ·2026-10-20 ·Tingxu Han, Zijie Shen, An Guo, Lyuke Wang, Chunrong Fang +2 more
code/data similarity 0.65
Abstract

LiDAR-based 3D object detection is a core perception service for autonomous driving, but deployment requires robustness to point-cloud corruption while meeting latency and memory requirements. Existing approaches address robustness and resource efficiency separately, resulting in compact detectors that are fragile under corruption or robust detectors that remain costly to deploy. We therefore formulate LiDAR perception provisioning as constructing a detector that remains accurate under point-cloud corruptions while meeting constraints on inference latency and peak GPU memory. To achieve robustness, we first craft corrupted samples that mimic extreme weather conditions. Then we train candidate detectors offline by ordering clean and corrupted samples by perturbation sensitivity, through which detectors learn more from hard corrupted samples. We estimate perturbation sensitivity using an ensemble of seven heterogeneous 3D detectors by tracking changes in confidence, BEV overlap, and unmatched detections. To improve efficiency, we narrow the network and use offline neighborhood-density measurements to determine how many points and neighbors each sampling stage processes. We evaluate our method using AP (Average Precision) under clean and corrupted conditions, inference latency, and peak allocated GPU memory. On KITTI for Car detection with PointRCNN, our method improves Moderate AP under corruption by 3.32 points over the original detector while reducing mean latency by 19.8% and peak allocated GPU memory by 53.9%. Across two datasets, two detector architectures, and three object classes, our method improves AP under corruption by 4.03 points on average over the corresponding original detectors, while reducing mean inference latency and peak allocated GPU memory by 14.4% and 38.0%, respectively. Our code is available at https://github.com/drunklibai/robust-efficient-lidar-perception.

0.20

AT3D-AD: Anomaly Type-Aware 3D Anomaly Detection via Hierarchical Point-Language Alignment

cs.CV ·2026-09-22 ·Jingyu Zeng, Haoquan Lu, Can Gao
similarity 0.65
Abstract

Detecting and localizing 3D point-cloud defects is essential for industrial inspection. However, existing methods often suffer from imprecise localization due to the lack of anomaly supervision and reliance on single-granularity representations. To address these limitations, we propose Anomaly Type-Aware 3D Anomaly Detection (AT3D-AD), a unified framework for joint detection, localization, and classification. Specifically, we first design the Physics-Driven Parametric Anomaly Synthesis (PDPAS) module employing multiple parametric functions to generate synthetic anomalies, providing explicit anomaly supervision. Then, we propose the Hierarchical Global-Local Anomaly Alignment (HiGLA) module to align global and local representations within the normal and anomalous groups. Finally, we propose the Semantic-Geometric Anomaly Classification (SGAC) module to jointly learn localization and classification, yielding spatially precise and type-discriminative anomaly representations. Extensive experiments establish new state-of-the-art performance on all four benchmarks. AT3D-AD achieves Object/Point AUROC scores of 98.1\%/98.9\% on Anomaly-ShapeNet and 95.0\%/95.2\% on Real3D-AD, while reaching 74.2\% Macro-F1 for anomaly-type recognition on Real3D-AD.

0.17

MVFM-3DAD: Multi-view Flow Matching for 3D Anomaly Detection via Density Proxy Estimation

cs.GR ·2026-08-12 ·Liangwei Li, Lin Liu, Jing Zhang, Xiaohui Du, Ruqian Hao +3 more
publishedcode/data similarity 0.63
Abstract · ICIG 2026 oral presentation, 13 pages, 3 tables, 4 figures

In 3D anomaly detection (3DAD), most existing methods rely on Memory bank retrieval or reconstruction. However, memory-based methods are constrained by the coverage of stored normal features, while reconstruction-based methods may learn identity shortcuts that also reconstruct anomalous inputs well. These limitations motivate a density-oriented approach that evaluates whether a test sample follows the learned normal distribution. To this end, we propose MVFM-3DAD, a flow-based framework that reframes 3DAD as density proxy estimation over the normal data distribution. MVFM-3DAD introduces a Bidirectional Geometric Projector (BGP), whose forward process converts irregular point clouds into structured multi-view representations. The Flow-guided Density Proxy Estimator (FDPE) estimates a reference density for each view feature, after which the backward process of BGP maps these multi-view density estimates to their corresponding 3D points. Building on it, anomalous features can be identified by their terminal normality. Unlike conventional flow-based likelihood estimation, our formulation requires neither input reconstruction nor explicit Jacobian evaluation, yielding a simple and efficient anomaly-scoring mechanism. Extensive experiments show that MVFM-3DAD outperforms the strongest competing methods on Real3D-AD and MVTec3D-AD. Code is available at https://github.com/lil-wayne-0319/MV3D-AD

0.45

When Point Clouds Outperform Pixels: Rethinking Zero-Shot Multimodal Anomaly Detection

cs.CV ·2026-09-22 ·Chenglin Ye, Lupeng Liu, Dongbo Yu, Jun Xiao, Yunbiao Wang
similarity 0.62
Abstract

Zero-shot multimodal anomaly detection commonly assumes that RGB and point cloud modalities are equally reliable and can contribute uniformly to anomaly localization. We challenge this assumption. Using a set of recently proposed stringent metrics that penalize false anomaly responses in normal regions, we find that point clouds are substantially more reliable than RGB under zero-shot category shift. Motivated by this observation, we propose WOOPS (\textbf{W}hen P\textbf{o}int Cl\textbf{o}uds Out\textbf{p}erform Pixel\textbf{s}), a reliability-aware zero-shot multimodal anomaly detection framework. To strengthen the more reliable geometric modality, we design a Multi-view Information Decoupling module to suppress heterogeneous information from multi-view point cloud projections and enhance point cloud feature quality. To avoid unconditional fusion, we further introduce a Modality Reliability Calibration module to adaptively calibrate modality contributions according to their reliability. Extensive experiments show that our method achieves the best or competitive performance under the new metrics in both unimodal and multimodal settings. Further analysis demonstrates that point cloud information also improves RGB-only inference, while ablations verify the effectiveness of both modules. Code will be released upon acceptance.

0.21

Third-Place Solution for the UCF UrbanTwin V2X-Real Track at ECCV 2026: Synthetic Point Cloud Generation and Sim-to-Real 3D Object Detection

cs.CV ·2026-11-12 ·Antong Deng, Yuxin Zhang, Zhongxiang Xing, Zhenzhen Lin, Jiong Mu
published similarity 0.61
Abstract · 8 pages, 1 figure, 4 tables. 3rd place, Track 7 (V2X-Real), UCF UrbanTwin Sim2Real LiDAR Challenge, 6th DriveX Workshop at ECCV 2026

This report presents a complete technical solution for the UrbanTwin V2X-Real Sim2Real LiDAR Challenge, covering both synthetic point cloud generation and 3D object detection. For data generation, we adopt per-axis quantile calibration. Public V2X-Real training data are used to construct the real reference distribution, and independent one-dimensional quantile mappings are estimated for the x, y, and z axes of the base synthetic point clouds. The calibrated point clouds are then resampled using a fixed random seed and clipped to the valid spatial range, producing 50 frames with 2,000 float32 XYZ points per frame. For detection, we use a two-stage Voxel R-CNN (VoxelRCNN) detector trained with RangeLDM-enhanced synthetic point-cloud data, point clouds downsampled to 50k points per frame, and reconstructed pedestrian data. Training is performed on four NVIDIA GeForce RTX 4090 GPUs with a global batch size of 16 for 40 epochs. Final testing uses direct single-model inference with the original VoxelRCNN model. On the official evaluation server, the normalized Realism score is 0.7905 and the normalized Detection score is 0.5583, with mAP@0.5 of 0.3908, BEV mAP@0.5 of 0.4219, and mAP@0.7 of 0.1047. According to the official weighting rule, the final combined score is 0.6 x 0.5583 + 0.4 x 0.7905 = 0.6512. This report documents the complete implementation details of data construction, model training, inference, submission formatting, and official evaluation.

0.22

Low-Density 3D Point Cloud Classification

cs.CV ·2026-11-03 ·Ahmed Baha Ben Jmaa, Faten Chaieb
publishedbenchmark similarity 0.61
Abstract

3D point cloud classification, a task in computer vision, has recently gained substantial interest due to its extensive applications across various domains such as augmented and virtual reality, robotics, and autonomous driving. However, classifying 3D point clouds becomes challenging in real-world scenarios where the density levels vary. These variations are due to limitations inherent to current sensing technologies and variable environmental conditions, which often prevent the capture of detailed and comprehensive geometric representations. Existing classification methods, which have demonstrated impressive results on dense point clouds, may be affected and could experience reduced performance when dealing with low-density point clouds. Addressing this challenge, this paper introduces LD-PointNet++, an architecture optimized for the classification of low-density point clouds. To pave the way for LD-PointNet++, we conduct the first benchmarking study that systematically evaluates state-of-the-art point cloud classification methods across varying densities, revealing significant performance declines in low-density environments. Experimental results on the ModelNet benchmark dataset demonstrate that LD-PointNet++ not only outperforms these methods in low-density scenarios but also demonstrates consistent accuracy above 90% across different density levels.

0.39

PointLAM: Local Attentive Mamba for Efficient Point-based 3D Object Detection

cs.CV ·2026-09-18 ·Xuanming Shang, Weijia Zhang, Chao Ma
top venuecode/data similarity 0.61
Abstract · Accepted to ECCV 2026

3D object detection from LiDAR point clouds faces a fundamental dilemma: voxel-based methods achieve efficiency at the cost of geometric quantization, while point-based methods preserve fidelity but suffer from prohibitive computational bottlenecks. Specifically, point-based architectures are crippled by slow downsampling strategies (e.g., FPS) and expensive dynamic neighbor queries (e.g., k-NN) coupled with costly continuous interactions. To tackle these systemic inefficiencies, we propose PointLAM, a highly efficient and powerful point-based architecture driven by two synergistic innovations. First, to resolve the downsampling bottleneck, we develop the Laplacian Point Sampler (LPS). LPS employs an implicit discrete Laplacian high-pass filter and Doubly Sorted Sampling to achieve fast, structure-aware foreground preservation. Second, to overcome local modeling latency, we design the Local Hadamard Aggregator (LHA). LHA decouples spatial indexing from feature representation using transient grids, and replaces complex continuous interactions with a Hadamard Gating mechanism for topology-aware, attentive modulation. By coupling this local gating with Bi-Directional Mamba (BDM) layers for global sequence modeling, we formulate the Local Attentive Mamba (LAM) block. Powered by this architecture, PointLAM achieves competitive performance on nuScenes and Waymo for point-based detectors. It rivals highly optimized voxel competitors while requiring a fraction of the computational footprint, demonstrating marked superiority in detecting small instances and handling extreme sparsity. Project page: https://pointlam.github.io/.

0.59