CS Paper Radar

TriCalRAG: A Three-Strategy, Retrieval-Augmented Benchmark for On-Premise LLM-Based Root Cause Analysis in AIOps

Rohit Patel, Susil Kumar Mohanty, Jeenal Chaudhary

cs.DC cs.AIcs.CRcs.ETcs.LG ·submitted 2026-09-13 19:52 UTC · v2
benchmark

Abstract

Operational logs create a need for private, resource-efficient incident analysis, but aggregate detection scores can conceal severe prediction bias. We present TriCalRAG, a reproducible benchmark for log-anomaly detection with generated root-cause and remediation outputs across BGL, HDFS, Thunderbird, and OpenStack. The primary evaluation compares Qwen2.5-14B and Mistral-Small-22B, served through vLLM on one NVIDIA RTX PRO 6000 GPU (96 GB), under zero-shot, few-shot, and retrieval-augmented generation (RAG) prompting across three data-sampling seeds. We report F1, bootstrap confidence intervals, predicted-positive rates, throughput, and memory use, with DeepLog as a held-out classical baseline. Mistral-Small attains a higher macro-averaged F1 than Qwen2.5-14B (0.644 versus 0.560), whereas Qwen provides approximately twice the throughput. A separate log-probability evaluation compares raw decisions with Contextual Calibration (CC) and Batch Calibration (BC): neither correction consistently improves prediction-balance diagnostics across prompting strategies. Supplementary single-run comparisons extend evaluation to 4-bit Llama-3.1-70B via local Ollama and Claude Haiku 4.5 via Anthropic's cloud API; RAG improves F1 on all four datasets for both models. Claude's reported aggregate F1 increases from 0.566 to 0.695, while the estimated API cost rises from \$0.94 to \$2.15 per 1,000 incidents. Local deployment ablations show approximately 41-fold throughput scaling with batching and 20% lower latency with 4-bit quantization on the tested workload. These findings support retrieval as useful context for anomaly decisions, while the supplementary protocols, unvalidated explanation quality, and prediction-balance diagnostics limit broader claims about RCA accuracy and probabilistic calibration.

Comment
20 pages, 5 figures, 9 tables, https://arxiv.org/pdf/2609.14762v2

Closest papers

Nearest neighbours by meaning across the whole index.

When Log Parsing Removes What Matters: Detecting Failures in Distributed GPU Workloads

cs.LG cs.AIcs.DCcs.SE ·2026-09-29 ·Boyuan Cui, Yuyang Zeng, Yifang Tian, Hans-Arno Jacobsen
published similarity 0.68
Abstract · v2: revised after publication; differs from the RASE '26 version

Large AI models increasingly rely on distributed GPU execution, yet it remains unclear whether established anomaly detection methods transfer effectively to this setting. We introduce GF-Bench, a PyTorch-based framework for generating controlled failures in distributed GPU workloads, and a dataset produced with it. The framework supports extensible workload and fault-injection logic; based on this design, the current release targets failures visible in multi-GPU communication logs and provides 220 labeled two-GPU runs covering normal behavior, CUDA out-of-memory fail-stop faults, and persistent-straggler fail-slow faults. Using GF-Bench, we evaluate three sequence-based methods (DeepLog, LogAnomaly, and LogBERT) and the large language model (LLM)-based LogPrompt with in-context learning (ICL) and chain-of-thought (CoT) prompting strategies on parsed logs, and additionally evaluate LogPrompt on raw logs. On parsed inputs, no method reliably detects both failure classes, and the highest overall F1 score is 0.667. Raw inputs raise the overall F1 score of ICL-LogPrompt to 0.983, at 9.0x its average input-token usage and 8.9x its per-run cost. These results reveal a trade-off between effectiveness and efficiency: parsed inputs reduce LLM token use and inference cost but can discard the distributed execution context required for accurate failure detection. GF-Bench provides a reproducible basis for studying cost-efficient anomaly detection methods and can be extended to additional GPU workloads and failure types.

0.31

TriFleetRCA: On-Premise LLM Root Cause Analysis for Kubernetes

cs.CR cs.AIcs.DCcs.LG ·2026-09-20 ·Rohit Patel, Susil Kumar Mohanty, Jeenal Chaudhary
similarity 0.64
Abstract

Root cause analysis at a remote site is slow: evidence is scattered across pod logs, Kubernetes events and cluster-level objects, and many operators cannot send production logs to a hosted model at all. On-premise inference removes the second constraint but raises a question live-cluster benchmarks have not addressed: when one workstation GPU fixes both the model and the context budget, how should evidence be retrieved, and what happens when the runbooks the model consults have been tampered with? We present TriFleetRCA, a pipeline running entirely on one on-premise GPU that collects evidence at one of three scopes (pod, namespace, cluster), ranks it by template de-duplication then BM25, filters runbooks through an ingest guard, and returns a root cause with the evidence lines supporting it. We evaluate on a live Kubernetes cluster into which we inject four faults, so ground truth is known by construction, across 100 analyses with Qwen2.5-14B-Instruct at temperature 0. The hit rate was 0.85, 0.90 and 0.95 at pod, namespace and cluster scope; intervals overlap, but the whole scope effect comes from the one fault whose cause is a cluster-level object, and cluster scope costs 55% more tokens. De-duplication before ranking raised the hit rate from 0.75 to 0.90 at equal token cost. A poisoned runbook telling the model to delete the namespace was rejected by the guard every run; with the guard disabled the model declined to follow it in all 20 analyses, making the guard defence in depth rather than the sole barrier. Separating citation quality from accuracy proved informative: one fault was diagnosed correctly and cited incorrectly every trial, a failure mode accuracy conceals. Median latency was 1.6 s at 2,200 prompt tokens. We release the pipeline, the fault injector and all records.

0.20

Fast Unsupervised Anomaly Detection Methods on Software Logs - An Empirical Study

cs.SE ·2026-11-05 ·Jesse Nyyssölä, Mika Mäntylä, Yuqing Wang
hot direction similarity 0.64
Abstract

Anomaly detection on software logs ensures system reliability through failure identification, root cause analysis and fault localization. While supervised models show excellent performance, in a practical setting there rarely are labeled training data available. This calls for the use of unsupervised models. We study effects of data preprocessing, anomaly detection method, and the dataset. For preprocessing, we examine three options: The use of anomaly-free training data, using randomized as opposed to chronologically selected training data, and the use of a custom loader to extract log message from the log line. Regarding anomaly detection we use four models (KMeans, IsolationForest, RarityModel, Out-Of-Vocabulary Detector) and three representations (Words, trigrams, and parsed events). We evaluate these approaches on seven datasets: BGL, HDFS, Hadoop, Spirit, Thunderbird, Liberty, and LO2Token. We run each combination of the selected factors and measure performance with AUCROC and F1-score metrics. Then we utilize a generalized linear model to establish relationships between the factors. Furthermore, we address execution times. Our evidence reveals large variability across all datasets, preventing us from making recommendations that apply universally. For instance, log parsing enhances performance on some datasets but reduces it on others. The evidence suggests that using anomaly-free data for training unsupervised models can improve anomaly detection performance, though this requires extra effort to identify such data.Previous work has argued that shuffling data leads to unrealistic model performance (data leakage). Yet, our results show this does not hold for the unsupervised models we tested, while it remains true for supervised models in the same setup. For fast execution of the pipeline, use word representation and avoid IsolationForest model.

0.25

Protocol-Sensitive Evaluation of Log Anomaly Detection: Component Costs and Target-Access Sensitivity on HDFS and BGL

cs.DB cs.AIcs.CEcs.IR+1 ·2026-10-05 ·Hang Xiao, Janet Sung, Zhaoyi Li, Gangzhen Qian, Chuhong Xu
published similarity 0.60
Abstract · Accepted at DASC 2026. 8 pages, 1 figure, 8 tables. Reproduction support artifact: https://doi.org/10.5281/zenodo.23151002

Protocol choices can change the conclusions drawn from log anomaly detection benchmarks even when detector settings are fixed. We present a joint empirical study of split construction, representation visibility, and component costs using six fixed count, sequence, and semantic configurations on Hadoop Distributed File System (HDFS) and Blue Gene/L (BGL) logs. Random splits place several configurations near the average-precision ceiling, whereas group-disjoint HDFS and chronological BGL evaluation produce lower scores and different observed orderings. At a fixed BGL cutoff, parser choice spans 0.124 in semantic XGBoost mean average precision while preserving its lead over count XGBoost; the earliest rolling period reverses that ordering. A two-factor cross-system ablation contrasts source-only representations with offline transductive access to unlabeled target templates through the representation corpus and inverse document frequency: HDFS-to-BGL mean average precision moves from 0.191 with source-only access to 0.325 with union-corpus, target-IDF access, and the intermediate conditions reveal direction-dependent interactions in average precision and retrieval at fixed review budgets. Component-level profiling separates parsing and representation costs from classifier training, prediction, and storage. Together, these findings connect detector comparisons to the test population, preprocessing state, visible information, and measured pipeline stages, and identify the protocol fields needed alongside a score to support interpretable comparisons of log anomaly detection accuracy and resource use.

0.64

Where Root Cause Analysis Fails: A Retrieval-Reranking Decomposition

cs.LG ·2026-09-29 ·Hada Melino Muhammad, Luan Pham, Laure Barrière, Sachin Shetty, Leonardo Pulga +1 more
top venuebenchmarkcode/data similarity 0.59
Abstract · Accepted at NeurIPS 2026 (Evaluations & Datasets Track)

Identifying the root cause of an anomaly among hundreds of sensors is critical for preventing safety incidents and costly downtime in complex monitored systems. Existing studies evaluate root cause analysis (RCA) methods using top@k accuracy. We show that this metric has a fundamental blind spot: it conflates two failure modes, retrieval failure, where the true cause is never considered, and reranking failure, where it is considered but ranked too low. In this work, we introduce a retrieval-reranking decomposition and audit four well-known benchmarks to expose this blind spot. Our experiments show that, on benchmarks with complex faults, statistical baselines mis-rank the true cause 79-100% of the time, and graph-based methods never clearly beat the best statistical baseline, whether their causal graphs are learned on short fault windows, on retrieved candidate pools guaranteed to contain the cause, or on multi-day normal-operation data. Meanwhile, on simple benchmarks where faults manifest significantly at their origin, retrieval is nearly solved (98-100%). Guided by the decomposition, we build a two-stage pipeline combining a multi-signal retriever with an LLM reranker that, as one fixed configuration, matches or exceeds the best baseline's top@1 accuracy on all six benchmark suites (by up to +12 points), with no causal graph or labeled data required. When all methods rank the same retrieved candidates with the true cause guaranteed present, adding a short system-description document lets the reranker lead the best baseline by +7 to +18 points on every benchmark. Code is available at https://github.com/cruiseresearchgroup/DecompRCA.

0.70

RAGMark: A Comprehensive Framework for Benchmarking Retrieval-Augmented Generation Systems

cs.PF cs.AIcs.ARcs.IR ·2026-09-04 ·Zlatan Feric, Amir Taherin, Bin Ren, Yanzhi Wang, Jennifer Dy +1 more
publishedcode/data similarity 0.59
Abstract · 18 pages, 9 figures

We present RAGMark, a modular benchmarking framework for advanced Retrieval-Augmented Generation (RAG) systems targeting small-scale multi-GPU environments. RAGMark evaluates diverse RAG components, including retrievers, vector databases, prompt-processing methods, and generator models, while collecting detailed per-stage metrics such as latency, GPU utilization, memory consumption, power usage, time to first token (TTFT), throughput, and answer quality. The framework is highly extensible, separating RAG stages, timing, and resource monitoring into modular components, and is designed to efficiently sweep large configuration spaces while minimizing repeated model and database initialization overhead. Using RAGMark, we characterize five RAG workloads on open-domain QA datasets across varying retrieval depths, model scales, reranking, compression methods, and vector database configurations. We show that while autoregressive generation dominates latency in naive pipelines, context-reduction techniques shift bottlenecks across compute, memory bandwidth, and preprocessing stages. Reranking and compression produce compounding benefits: reranking reduces compression workload itself, while both jointly reduce prefill and KV-cache traversal costs, lowering energy consumption by up to 66%. We further observe strong cross-stage interactions, where small upstream context reductions cascade through downstream latency, memory traffic, and energy consumption. The RAGMark source code is publicly available at: https://github.com/zferic/RAGMark.

0.72

TRAIL: Towards Effective Log Parsing for Rare Logs through Template-Preserving Augmentation

cs.SE ·2026-09-21 ·Sepideh Hodaeian, Zhenhao Li, An Ran Chen
benchmark similarity 0.59
Abstract

Log parsing is essential for system log analysis because it supports tasks such as debugging, monitoring, and anomaly detection by transforming unstructured log messages into structured log templates. However, real-world log datasets exhibit highly imbalanced, long-tailed distributions, where a small number of frequent templates dominate while many rare templates appear only a few times. This imbalance causes evaluation results to be overly optimistic by allowing frequent templates to dominate benchmark metrics, while poor performance on rare yet operationally important events remains largely hidden. In this paper, we investigate the prevalence and impact of rare log groups, defined as log groups with fewer than five instances. Our empirical study on the widely used Loghub-2.0 benchmark shows that rare log groups account for nearly 20% of all templates but less than 0.01% of log messages. Because they contain only a handful of instances, all evaluated parsers experience substantial performance degradation on these groups. To address this challenge, we propose TAILOR, a log parsing framework that improves template inference for rare log groups through template-preserving augmentation. TAILOR enriches rare log groups with template- consistent log messages before template inference. The additional structural evidence helps distinguish static tokens from dynamic variables. Our experimental results show that TAILOR improves parsing accuracy on rare log groups by 19% over the strongest baseline while maintaining competitive performance on complete datasets. We further show that the proposed augmentation strategy generalizes across different LLM backbones and consistently improves existing LLM-based parsers without modifying their core architectures.

0.13

From Noisy Telemetry to Actionable Warnings: GPU Failure Prediction in Industrial Clusters

cs.SE ·2026-09-28 ·Yongqian Sun, Run Zhu, Wenwei Gu, Mengyao Li, Shenglin Zhang +7 more
similarity 0.58
Abstract · GPU cluster, failure prediction, event-level evaluation, fault-specific modeling

GPU clusters are critical infrastructure for AI services, but accurate and actionable GPU failure prediction remains a problem in production settings. We study ticket-linked telemetry from a ByteDance GPU cluster and identify three obstacles: workload-confounded telemetry, heterogeneous fault precursors, and the gap between window-level predictions and actionable alerts. These findings motivate Falcon, a fault-specific warning framework combining missingness-aware temporal and peer-relative features, fault-specific learner selection, and an event policy based on thresholding, persistence, and cooldown. On the test set, Falcon achieves the highest F1 among four baselines and reaches 70.6% F1 on the best-performing fault type. Detected cases provide median lead times of 17.34-35.57 hours. We further report a production deployment, where Falcon is calibrated toward high-precision alerts to reflect false-positive costs. Together, these results show that fault-specific modeling improves early warning from noisy production GPU telemetry.

0.29