CS Paper Radar

HydroMap: Probabilistic Water Surface Elevation Mapping for Semantic Scene Representation in Inland Waterways

Zhongbi Luo, Yunjia Wang, Herman Bruyninckx, Peter Slaets

cs.RO ·submitted 2026-09-14 01:46 UTC · v2

Abstract

Autonomous surface vehicles operating in inland waterways require a persistent representation of both surrounding structures and the water surface. LiDAR-based simultaneous localization and mapping often produces sparse or missing water returns, leaving this operational surface absent from the reconstructed scene. We propose HydroMap, an odometry-decoupled framework that reconstructs water surface elevation from stereo observations and integrates it with the structural map. Per-frame water points form joint cell observations with propagated stereo and pose uncertainty, and successive observations are fused into a persistent probabilistic elevation map. Semantic map conversion then combines the elevation map with structural geometry in a unified 2.5D representation of water, boundaries, structures, and overhead regions. On the Pohang Canal and Leuven Vaart datasets, the elevation RMSE remains below 5 cm relative to LiDAR references expressed in the same map frame. The elevation and semantic maps are published at 2 Hz and 1 Hz, respectively. HydroMap thereby complements LiDAR maps with a persistent representation of the water surface for downstream navigation in inland waterways.

Comment
submitted to the IEEE

Closest papers

Nearest neighbours by meaning across the whole index.

The Coastline as a Structural Constraint: Harnessing Scene Geometry for Autonomous Surface Vessel Localization

cs.RO cs.CV ·2026-08-21 ·Derek R. Benham, Joshua G. Mangelson
similarity 0.73
Abstract · 22 pages, 13 figures, 7 tables

Coastal environments contain rich, largely unexploited geometric structure capable of providing globally referenced localization cues. In this work, we present two complementary localization frameworks that exploit shoreline and water-surface geometry for GPS-denied autonomous surface vessel localization. The first framework leverages LiDAR observations of the water surface to estimate roll, pitch, and heave (vertical motion), while recovering global position and heading through direct registration of shoreline observations against a satellite-derived coastline map. The second framework relies solely on passive imagery to detect the shoreline and horizon through semantic segmentation. Using the proposed coastal scene geometry, shoreline distance is inferred from monocular imagery. Shoreline observations are accumulated into short-duration local submaps, registered against the same satellite-derived coastline map, and fused within a hierarchical factor graph. Evaluated across three real-world coastal datasets, the LiDAR pipeline consistently improves trajectory accuracy over standard baselines, while the monocular architecture maintains bounded long-term drift. In addition, we establish that modern zero-shot foundation models can reliably extract shoreline observations across diverse coastal environments. Together, these results demonstrate that coastal geometry provides a powerful and dependable source of globally referenced information for GPS-denied maritime localization.

0.40

Persistent Metric-Semantic Maritime Scene Memory from Open-Vocabulary 3D Scene Graphs

cs.CV cs.RO ·2026-11-10 ·Kim Alexander Christensen, Dina Zimmermann, Martin Steinert, Eleni Kelasidi
similarity 0.65
Abstract · Website: https://kimachristensen.github.io/maritime_3dsg

Three-dimensional scene graphs (3DSGs) can provide robots with persistent metric-semantic representations for spatial reasoning, but the existing methods have primarily been developed for indoor and terrestrial environments. In this paper we investigate how a representative outdoor open-vocabulary method transfers to maritime environments and which adaptations are needed. Our experiments show that zero-shot representative outdoor 3DSG descriptions agree with our labeled ground truth for a majority of geometry-supported objects on our data, but the resulting map exhibits considerable physical-entity fragmentation, and its terrestrial higher-level assumptions don't capture maritime spatial organization needs. We therefore keep the underlying mapping method and post-process its accumulated evidence. We show a metric-semantic consolidation method followed by geometry-grounded multi-view vision-language model (VLM) reasoning that reconciles remaining fragments into physical entities and groups entities through observations into local places. In parallel, we construct maritime macro regions using map priors and onboard water and structure observations, and associate them with the local places. The resulting representation reduces physical-entity fragmentation beyond both the baseline and our geometry-semantic consolidation component alone, supports correspondence of fixed local places across repeated maritime traversals, and improves contextual retrieval on our reviewed queries over tested baselines. These results show how an outdoor open-vocabulary map can be adapted into persistent maritime scene memory with our methods for object/place identity and spatial abstractions.

0.14

ExcavaTwin: Training-Free Geometry-Guided Semantic Elevation Mapping for Autonomous Excavation

cs.RO ·2026-09-28 ·Yu Deng, Lingshan Zeng, Tong Hu, Rushi Dai
similarity 0.64
Abstract · 8 pages,5 figures

Autonomous excavation requires a spatial representation that jointly captures terrain geometry and task-relevant semantics. Existing excavation mapping is largely elevation-centric, while generic semantic models remain unstable in unstructured outdoor scenes. We present ExcavaTwin, a pure-vision geometry-guided semantic elevation mapping framework without excavation-specific training. Given multi-view RGB images, the framework: 1) reconstructs scene geometry and semantic observations using frozen vision models; 2) derives terrain and non-terrain geometric support; 3) performs geometry-constrained multi-view semantic fusion to suppress implausible predictions and recover incomplete observations; and 4) projects the fused state into a task-oriented semantic elevation map. Experiments on public datasets and real excavation scenes demonstrate reliable geometric and semantic perception. In real excavation, the system achieved an average update interval of approximately 1.4 s and a mean elevation error of 12.74cm in dynamically modified regions. Larger errors mainly occur during rapid terrain changes and transient visual disturbances caused by machine motion.

0.19

Scalix: Uncertainty-Aware Scale-Consistent Monocular SLAM

cs.RO ·2026-08-18 ·Sebastian Barbas Laina, Tianyi Zhang, Panagiotis Petropoulakis, Simon Schaefer, Simon Boche +3 more
similarity 0.63
Abstract · 8 pages, 5 figures and 3 tables

Cameras are ubiquitous sensors in robotics due to their compact form factor and the perceptual richness captured through visual information. Monocular SLAM enables robots to understand the environment with a minimum setup, however, it inherently suffers from scale ambiguity. A common solution is to provide multi-modal sensor configurations, such as visual-inertial systems, where scale is observable unless the robot navigates under a constant-velocity motion, a common scenario in mobile robotics. With the advent of deep-learning, geometric foundation models have been used to address this problem, but the depths maps are often noisy and scale-inconsistent across frames. In this paper, we propose Scalix, a real-time monocular SLAM framework that achieves metric-scale state estimation by integrating learned depth cues into a probabilistic factor-graph formulation. By augmenting existing monocular depth models with both per-pixel depth uncertainty and per-frame scale uncertainty, Scalix treats scale predictions as independent measurements within its optimization, leading to improved scale consistency through multi-view data associations. Experiments in large-scale outdoor and indoor environments demonstrate state-of-the-art performance on both metric and up-to-scale benchmarks while maintaining real-time operation and generalization.

0.40

SEAM: Submap-Anchored Evidence for Lifelong LiDAR Mapping under Trajectory Deformation

cs.RO ·2026-09-16 ·Kyuwon Kim
similarity 0.63
Abstract

We propose SEAM, a LiDAR-based lifelong mapping framework. Instead of relying on a single anchor spanning the entire session, SEAM generates evidence based on a trajectory optimized with submap-level anchors, and performs dynamic object removal and change detection. Through submap-level reprojection, the generated evidence remains usable even if the trajectory is subsequently modified by a new session, eliminating the need to recompute the entire process from scratch. SEAM suppresses geometrically unreliable inter-session loop edges using a DOP-based confidence measure. Suppressing unreliable loop edges prevents alignment errors. SEAM also uses a directional voxel-wise evidence model. The model accounts for occupancy patterns that vary with ray direction. Direction-aware evidence separates dynamic objects from environmental changes more precisely. Experiments on a real construction-site dataset and a long-term multi-session dataset show that SEAM achieves higher accuracy and faster processing than existing methods.

0.17

Multi-Session Multimodal Underwater Mapping with Acoustic and Optical Imaging

cs.RO ·2026-09-15 ·Precious Philip-Ifabiyi, Valerio Franchi, Fausto Ferreira, Nuno Gracias
similarity 0.63
Abstract · Submitted to Ocean Engineering special issue "Multimodal 3D Perception for Underwater Engineering: Acoustics, Optics and Integrated Solution…

Accurate seafloor mapping is essential for marine science, archaeology, and environmental monitoring. However, integrating data from different sensors, such as side-scan sonar and optical cameras, collected across separate survey sessions, remains challenging due to positioning drift and sensor offsets. This paper presents a multi-session, multimodal underwater mapping framework based on factor graph optimization. The method jointly optimizes vehicle trajectories, 3D landmark positions, sensor extrinsics, and per-session global alignment transformations. By combining rigid inter-session corrections with local trajectory deformations, it compensates for both inter-session offsets and intra-session distortions from accumulated navigation errors. The proposed methodology was validated on real-world datasets collected along the Catalan coast. Results show measurable improvements in map consistency over both unoptimized and rigid-alignment baselines across all metrics, including Pixel Accuracy and mean Intersection over Union. The method achieves a 3.4% improvement in pixel accuracy over the unoptimized baseline, corresponding to improved semantic labelling across approximately 14700 $\text{m}^2$ of mapped area. Qualitative results further show consistent co-registration between sonar and optical maps, even in the presence of significant trajectory distortions and inter-session misalignments. These findings demonstrate the potential of the proposed framework to generate coherent multimodal seafloor maps from heterogeneous underwater surveys.

0.24

SURE-Map: Self-Correcting Streaming Geometric Foundation Models

cs.CV ·2026-09-14 ·Mingkai Liu, Hao Zhao, Xingxing Zuo
positioncode/data similarity 0.62
Abstract · Corrected a typo in the title; manuscript content unchanged

Streaming geometric foundation models are emerging as a compelling alternative to SLAM systems. Yet this streaming nature introduces a fundamental issue: each prediction is made from limited context, which is vulnerable to dynamic objects and weak textures. Small local errors accumulate into severe geometric distortion and long-horizon scale drift. We argue that reliable streaming reconstruction requires geometric foundation models to be not only predictive, but also self-correcting. We introduce SURE-Map, a self-correcting framework built upon two complementary principles. First, we explicitly model cross-view geometric uncertainty. Unlike conventional depth or point confidence, which primarily reflects the reliability of individual-view prediction, our uncertainty directly measures whether the jointly predicted pose and depth induce geometrically consistent cross-view pixel correspondences. Second, because local correction alone cannot eliminate slowly accumulating scale errors, we introduce multi-timescale self-correction: fast consecutive-frame inference preserves streaming efficiency, while sparse keyframe-window inference provides longer-range geometric evidence to periodically recalibrate the scale of recent trajectories. SURE-Map establishes new state-of-the-art performance for online feed-forward reconstruction across long-horizon benchmarks, reducing ATE-RMSE from 24.00 to 17.24 m on KITTI, 5.11 to 4.74 m on Oxford Spires, and 31.37 to 28.58 m on VBR, with further improvements to 15.17, 4.63, and 22.12 m when incorporating loop-closure refinement. Project page: https://mingkai-liu.github.io/projects/sure-map/.

0.52

LiFi: LiDAR Generation from Multi-View Images via Geometric and Semantic Collaborative Guidance

cs.CV cs.AI ·2026-10-14 ·Sizhuo Zhou, Xiaosong Jia, Fanrui Zhang, Qifeng Li, Junjie Li +8 more
top venuecode/data similarity 0.62
Abstract · Accepted to NeurIPS 2026

Generating LiDAR point clouds from multi-view camera images is a valuable task with applications in controllable data synthesis, cross-modal simulation and various perception tasks. However, most existing methods are not specifically designed for this task, and the quality of their generated LiDAR remains limited. Moreover, these methods typically focus only on semantic cues in images or generate LiDAR from a monocular camera image. In this work, we introduce LiFi (LiDAR From images), a dedicated framework for generating visually and geometrically aligned LiDAR scenes from multi-view camera images. LiFi guides the latent diffusion process through two complementary branches: geometry and semantics. The geometry branch constructs scene features from images through a reverse sampling algorithm and an uncertainty-aware geometric encoder combined with DepthAnything3, whereas the semantic branch provides high-level semantic representations via a cross-view interaction module. We further introduce a dual-branch balanced classifier-free guidance (CFG) strategy, which enhances the model's conditional generation capability while preserving the independent learning and collaborative controllability of the two branches. Extensive experiments demonstrate that LiFi outperforms state-of-the-art methods in generating high-fidelity LiDAR scenes. The code will be publicly available at: https://github.com/szzhou88/LiFi.

0.36