CS Paper Radar

Calibrate, Then Route: A Measured Study of Learned Request Routing for Disaggregated LLM Serving

Srikanta Datta Tumkur, Jay Iyer, Mehar Simhadri, Sai Pavan Kumar, Sai Kapil Kumar, Ramesh Nampelly

cs.AI ·submitted 2026-09-14 18:39 UTC · v1

Abstract

Disaggregated LLM serving places compute heavy prefill and memory heavy decode on separate GPU pools. Systems such as DistServe, Splitwise, and Mooncake make this separation fast, but routing still determines which instances handle each request. We study a router that estimates the additional completion time on each instance using exact prompt length, predicted output length, post admission KV cache pressure, and SLO class. We develop the policy in a discrete event simulator and validate it on eight NVIDIA A40 GPUs, each running a vLLM engine, with NIXL transferring KV caches between pools. All workloads run at measured saturation. Across three mixed, bursty arrival traces, the calibrated router achieves the highest mean goodput at 0.864, compared with 0.835 to 0.847 for round robin, least loaded, and a length heuristic. It also shows the lowest variance across traces. It beats round robin and the length heuristic on all three traces and least loaded on two. On the third, it trails by 0.003, within run to run noise. Hardware calibration matters: simulator derived constants cost 4.5 goodput points and roughly 40 percent of the tail latency advantage, reducing the scorer to little more than queue counting. Benefits grow with decode pool size and traffic heterogeneity but disappear in pools with three instances, where queue counts are often enough. Under extreme scarcity, greedy cost minimization concentrates requests on the cheapest scored instance, and blind spreading performs better. With calibrated costs, the learned router matches the goodput of round robin using six GPUs instead of seven.

Closest papers

Nearest neighbours by meaning across the whole index.

PackServe: SLO-Aware Request Scheduling for Agentic LLM Serving at Scale

cs.DC ·2026-09-27 ·Zhiyuan Tan, Dejiang Zhu, Jingzhe Jiang, Yihao Zheng, Yang Tian +2 more
similarity 0.74
Abstract · 13 pages, 13 figures

Request scheduling is a key challenge in large-scale clusters serving agentic large language model (LLM) workloads. An effective scheduler must preserve key-value cache (KVC) reuse across long, shared prefixes, meet token-level latency service-level objectives (SLOs), and minimize GPU resource footprint. Existing schedulers struggle to reconcile these requirements: request consolidation can sacrifice cache locality and increase prefill/decode interference, compromising both SLO attainment and resource efficiency. We present PackServe, a scheduler designed to reduce resource costs while meeting latency SLOs for agentic LLM serving. PackServe uses compact white-box models to predict latency under prefill/decode interference. Guided by these predictions, it packs requests onto fewer serving instances while preserving KVC reuse and SLO constraints, trading available latency headroom for improved per-instance throughput. Evaluation on 64 NVIDIA H20 GPUs shows that PackServe uses up to 16.8% and 24.6% fewer GPU-hours than state-of-the-art schedulers under 30-ms and 50-ms TPOT targets, respectively, while meeting the target TPOT objectives. PackServe has also been deployed in our production cluster comprising over 1000 GPUs, where it reduces the resource footprint by 34.7% compared with the original production scheduler.

0.21

Ready Cohorts: Bounding GPU Opportunity and Avoiding Host Round Trips in LLM-Agent Control

cs.DC cs.AIcs.OS ·2026-08-12 ·Josef Liyanjun Chen
benchmarktheorycode/data similarity 0.73
Abstract · 14 pages, 4 figures. Includes formal proofs, trace provenance, and a reproducibility appendix. Code and artifacts: https://github.com/josefc…

We introduce a mechanism that improves LLM-agent execution: keeping four-byte, GPU-computed control-path routing decisions on-device, avoiding a round-trip to host memory for redispatch. It is faster than host-dispatch in all 36 placements x mechanisms settings in our benchmark across four named GPUs with row-median speedup of 1.19x-2.39x, and outputs are correct, matching an independent host implementation, for all 14,557,440 calls in all configurations, in both tested mechanisms. Agent control paths can be deterministic. Their transitions between LLM calls and external tool calls can be GPU-accelerated by batching across agents and time. We define a cohort of transitions with launch times in a window, and study four shares of GPU-active time: a fixed-partition baseline F, an optimal P*, an upper bound U, and an online result A. Under assumptions of uniform relative launch deadlines, infinite capacity, and zero service times, we compute P* with a custom dynamic program and validate our simulator against it. We replay an anonymized 851-session trace, shown in full as a panel, stationary-ized with a Poisson process. With 100,000 target active agents and a launch deadline of 50 ms, where the headline results have K=256, we find F=30.19%, P*=43.00%, U=45.85%; our method for computing P* reveals that 81.83% of this opportunity is recoverable from cohort packing at fixed window ends. Our method for U relies on a novel notion of route-key, used only as a proxy (via conditional statistics) and does not purport to establish route-equivalence. We find a nested graph that retains some host-side decisions slower in all 60 configurations (five placements).

0.30

Where Should the KV Cache Live? Placement Policies Across GPU, CPU, and SSD for Long-Lived Sessions

cs.AI ·2026-09-14 ·Srikanta Datta Tumkur, Jay Iyer, Mehar Simhadri, Sai Pavan Kumar, Sai Kapil Kumar +1 more
similarity 0.72
Abstract

GPU high bandwidth memory is scarce and expensive, and KV caches consume much of it as chats, agent loops, and document question answering accumulate state. Systems such as Mooncake, LMCache, FlexGen, InfiniGen, and AttentionStore extend GPU memory with CPU DRAM and SSD. The harder question is which blocks belong in each tier, when to move or evict them, and whether prefetching helps. We study these choices in a discrete event simulator spanning GPU HBM, CPU DRAM, and SSD, calibrated against a random forest execution time predictor. We compare recency, reuse frequency, predicted reuse, and an EWMA predictor with prefetch lookahead across chat, agent, and document question answering workloads. Tiering supports 73.02 times more concurrent sessions per GPU and lowers cost per session by 62.04 times. These gains come from tier capacities of 1 plus 8 plus 64, not placement policy. Decode is compute bound at batch size one in our setup, so placement barely affects throughput. It mainly changes PCIe migration traffic and time to first token. Recency produces 2.30 times less migration traffic than reuse frequency for chat. Reuse frequency performs best for agents and document question answering. The existing predicted reuse policy is byte identical to recency, making its agent recommendation effectively recency. A genuine EWMA predictor changes behavior but still ranks behind reuse frequency on the workloads prediction was expected to help. Prefetching does not justify its bandwidth cost. Across the policy and cache size grid, even an oracle with knowledge of future requests never beats no prefetch on migration traffic. Workload specific placement can reduce data movement, but the predicted reuse and prefetch recommendations are not supported as implemented.

0.18

ROCm InferaSim: Cut LLM Serving Trial Costs and Deploy the Best Configuration

cs.AI cs.DC ·2026-11-02 ·Anshu Raina, Yao Fu, Zhang Jiejing, Peyman Razaghi, Shiksha Patel +9 more
similarity 0.71
Abstract · 37 pages, 11 figures

Serving an LLM efficiently depends on the engine, how the model is split across GPUs, precision, scheduler settings, speculative decoding, KV-cache management, and prefill-decode disaggregation. The best configuration depends on the model, hardware, workload, and objective. Operators usually find it by trial and error. Exhaustively measuring the candidates in our study would take about 25,000 GPU-hours. ROCm InferaSim predicts serving performance from a few short measurements. Choices such as batch size, prompt length, and GPU count change the amount of work per GPU without changing the kernels. ROCm InferaSim benchmarks each distinct set of kernels once, on at most one node. We call this measurement an anchor. Analytical laws carry that anchor to other deployments that run the same kernels. For multi-node deployments, ROCm InferaSim reduces the configuration to a single-node equivalent, measures it, and scales the result analytically. A simulator replays multi-turn traffic, and a tuning agent searches configurations using the predictions. On AMD Instinct MI355X GPUs with vLLM, SGLang, and ATOM, 11 anchors took 9.1 GPU-hours, against 204 GPU-hours to measure the 226 fixed-length configurations they cover. On 172 configurations, time per output token has 8.1% median error. On a multi-turn coding workload, throughput is within 8%. For 159 disaggregated deployments, none used as an anchor, throughput is within 5.5%. A five-candidate short list contains a deployment within 12% of the best feasible pairing of model and latency target.

0.27

Placing LLM Lookup Tables by Per-Layer Prefetch Deadlines

cs.DC cs.AIcs.LG ·2026-11-10 ·Wen Huang, Jack Liu
similarity 0.70
Abstract · 15 pages, 5 figures, 10 tables

DeepSeek-V4.1's 203 GB of Engram n-gram tables sit in host DRAM today, taking 190 of the 223 GiB a 4-GPU serving process uses. Row indices depend only on input tokens, so reads can start with each step and overlap earlier layers. V4.1's two Engram layers have windows that differ by 30x (0.3 vs. 9.3 ms). We show that this deadline, together with session reuse and contention on a shared device, decides which tier each table can use and which layers need cache, and we give a model that predicts the resulting slowdown from measured read times. Agent and chat traffic reuse rows within sessions, and static hot sets transfer poorly. We build SlackTier, a table tier for SGLang that issues all lookups at step start. It reads the short-window layer first and splits a small GPU row cache across layers. The path runs inside the decode CUDA graph and is bit-exact with the original gather. Layer 14's table can go to NVMe uncached with no measurable decode cost. With both tables on four NVMe disks, mean time per output token on agent and chat replays rises at most 1.4% over unmodified SGLang, and host memory falls from 212 to 34 GiB. Both tables need no cache when read over RDMA (remote direct memory access) from another node's memory; one copy serves two instances. On a KV-constrained agent workload, using the freed memory as host KV cache at the same memory budget raises median throughput by 36% and cuts median p90 time to first token from 38 to 24 s.

0.22

Cacheable by Design? Training Mixture-of-Experts Routers for Locality Against the Edge Memory-Bandwidth Wall: A Pre-Registered Negative Result with a Systems Measurement Study

cs.AI cs.LG ·2026-08-18 ·Shriniwas Ramesh Suram
code/datahighly cited similarity 0.70
Abstract · Pre-registered negative result plus a systems measurement study. Code, router-telemetry tool (llama-moe-trace), traces, data manifests, and …

Serving a 235B-parameter Mixture-of-Experts (MoE) model on a single 8 GB GPU is bottlenecked not by compute but by memory bandwidth: decode must stream each token's active experts from whichever tier holds them, and on consumer hardware most experts sit on an SSD far slower than RAM. We quantify this bandwidth wall on Qwen3-235B (Q4_K_M, 134 GB): measured decode is 0.44 tok/s warm, matching a bytes-per-token / bandwidth model, while a batching scheme that should amortize one disk sweep instead collapses at batch 32 from paging thrash. We build llama-moe-trace, a zero-surgery router-telemetry tool, and measure routing on Qwen3-30B: adjacent-token expert reuse is 2.0x chance, 95% of traffic uses 52.5% of experts, and an LRU cache of 13.4% of experts serves 66% of requests. We then ask whether cacheability is trainable: we pre-register training of 137M MoE language models with auxiliary locality and domain router losses, under joint criteria on cache-miss reduction and perplexity. The mechanism works (misses down up to 60%; a 99% static-pin hit rate) but every configuration fails the pre-registered <=1% perplexity gate -- miss reduction and quality are tightly coupled. Concurrent StickyMoE reports the same loss as near-free on single-domain sub-25M models; on multi-domain 137M we find the tax real. Our contribution is this pre-registered, stricter-criterion, multi-domain evaluation plus edge-serving measurements. A 340M rung shows the tax does not shrink with scale (it rises slightly). We further show training-free cache-aware rerouting stacks with trained locality -- together ~80% miss reduction at <=3.4% perplexity at both sizes, far cheaper than either alone -- while domain-primed prefetching does not help. All code, traces, and the pre-registration are released.

0.41

CECAR: Cache & Expert Co-Aware Routing Accelerates On-Device Inference of MoE LLMs

cs.LG cs.AI ·2026-11-15 ·Byeongju Kim, Hoonki Lee, Byungjun Kim, Inyul Ra, Yongjin Kim +2 more
top venuecode/data similarity 0.70
Abstract · Accepted to NeurIPS 2026. 24 pages, 5 figures, 19 tables

Despite growing interest in on-device LLM deployment, large-scale Mixture-of-Experts (MoE) models remain impractical on resource-constrained devices, as sparse expert activation still requires all expert weights to be memory-resident. To address this, we identify three key observations for on-device MoE inference: (a) cache hit rates are fundamentally bounded even under Belady's optimal policy; (b) these bounds are insufficient for low-latency on-device inference; and (c) prior cache-aware routing based on binary cache presence can induce routing instability. Based on these insights, we propose CECAR (Cache & Expert Co-Aware Routing), a MoE inference system that jointly considers expert routing and cache management. Unlike prior cache-aware routing methods, CECAR uses an ML-based cache policy to predict the expected reuse distance of each expert and prioritizes routing and execution toward experts with smaller predicted reuse distances. On the Qwen3-30B-A3B model, CECAR achieves 12.5 tokens/s on a consumer-grade GPU with only 16 GB of VRAM, where non-resident experts are fetched from SSD, delivering a 4.5x speedup over conventional MoE inference and exceeding the decode speed of baselines that keep the entire model fully resident in DRAM. Code is available at https://github.com/hoonki2002/CECAR.

0.50

Dissecting GPU Utilization for LLM Inference on Nvidia Hopper

cs.PF cs.ARcs.DCcs.LG ·2026-09-11 ·Mohammad Siavashi, Gerald Q. Maguire, Dejan Kostic, Marco Chiesa
published similarity 0.70
Abstract

A single SM utilization percentage can make an LLM inference workload look compute-saturated while hiding how much useful work is being done. The problem is not that the counter is wrong, but that it collapses several different mechanisms into one number. This is most severe during decode, where each request contributes only one new token and dense projection GEMMs become small-row matrix multiplications. On Hopper, the bfloat16 GMMA path executes these operations in fixed 64-row matrix fragments, so small-batch decode can fill only a small fraction of each fragment with real token rows. In this paper, we profile vLLM with FlashAttention-3 and cuBLASLt on an H100 NVL across cold prefill, warm prefill, and decode, sweeping sequence length and batch size. We replace the usual single utilization number with eight counter-validated views derived from raw Nsight Compute reports, each pinned to an NCU counter or explicit formula. Together, these views map utilization gaps to concrete mechanisms - fragment fill, occupancy limits, stall signatures, wave quantization, and kernel selection - across four production models and six per-layer kernel roles.

0.49