CS Paper Radar

Improving Reduced-Order Rotating Detonation Engine Models with Data Assimilation and Machine Learning

Ashwin Suriyanarayanan, Romit Maulik

cs.LG physics.flu-dynmath.DSphysics.comp-ph ·submitted 2026-09-14 19:05 UTC · v1

Abstract

Rotating detonation engines (RDEs) exhibit strongly nonlinear, multiscale wave dynamics that set the observed thermal field. High-fidelity simulations (DNS/LES) resolve these structures but remain computationally prohibitive, while low-order models such as the one-dimensional Koch-Kutz model capture circumferential wave motion yet lack the expressivity for high-frequency content. We use continuous data assimilation (nudging) to synchronize the Koch-Kutz solver with processed high-fidelity temperature data, introducing the prediction-observation mismatch as a relaxation source in the conserved energy equation; where observations are temporally sparse, interpolation supplies a target at every source update. As the nudging strength increases, the reduced model is progressively drawn onto the high-fidelity trajectory, and the forcing recorded along it provides an explicit, state-dependent estimate of the correction the model requires. We then train a Jacobian-regularized closure a priori on this recorded source. With the observation term removed, the corrected model advances autonomously, remains bounded, and recovers the temperature spectrum and the marginal statistics of the conserved variables relative to the baseline.

Comment
20 pages, 12 figures

Closest papers

Nearest neighbours by meaning across the whole index.

Iterative Refinement Diffusion for Super-Resolved Data Assimilation of Multiscale Physical Systems

cs.LG physics.flu-dyn ·2026-08-13 ·Mrigank Dhingra, Ramchandran Muthukumar, Rebecca Willett, Omer San
benchmark similarity 0.63
Abstract

Recovering high-resolution states from sparse, low-resolution observations is a central challenge in scientific machine learning and data assimilation. Classical data assimilation exploits temporal information through forecast-analysis cycles, but often requires repeated access to expensive high-resolution forecast models. Generative super-resolution can recover unresolved structure from coarse observations, but is commonly used as a one-shot mapping that does not fully exploit constraints from past states. We introduce Iterative Refinement (IR), a learned data assimilation framework that combines these perspectives. Instead of performing a single coarse-to-fine reconstruction, IR decomposes the task into resolution-wise forecast-analysis operations across a multiresolution hierarchy. At each stage, a shared neural operator with resolution-dependent spectral mode slicing provides a dynamical prior, while a shared conditional diffusion corrector uses the current coarser-resolution state to produce a refined posterior at the next finer resolution. We evaluate IR on one-dimensional stochastically forced Burgers dynamics and two-dimensional Kraichnan turbulence. On the challenging 256x256 Kraichnan benchmark, IR achieves an RMSE of 0.184 and an SSIM of 0.836, outperforming spectral upsampling, one-shot diffusion super-resolution, enhanced deep super-resolution, and an autoregressive forecaster. On the more constrained Burgers testbed, IR remains competitive with one-shot diffusion, which achieves the lowest RMSE. These results show that one-shot generative reconstruction can be effective for simpler settings, while hierarchical forecast-analysis refinement becomes advantageous in strongly multiscale and underdetermined regimes. Overall, IR combines temporal priors, generative correction, and multiresolution reconstruction for learned data assimilation in complex physical systems.

0.04

PR-Smoother: Simulator-Preserving Non-Gaussian Smoothing for Data Assimilation

cs.LG nlin.CDphysics.ao-ph ·2026-09-22 ·Yuta Tarumi
publishedtheory similarity 0.60
Abstract · Accepted at Neurips 2026

Many physical data assimilation (DA) workflows require smoothing methods that represent non-Gaussian posteriors over physical state variables, scale to high-dimensional simulators, train from observation windows alone, and remain compatible with calibration of the prescribed simulator. We introduce PR-Smoother, a simulator-preserving amortized smoother designed for this prescribed-simulator DA regime. Its key design principle is to keep the prescribed simulator explicit in both the evidence lower bound and the variational family: rather than learning replacement dynamics or a learned trajectory prior, PR-Smoother learns only future-conditioned corrections around the prescribed rollout. This yields an explicit non-Gaussian smoothing distribution over physical trajectories and supports joint state, parameter, and sensor-bias learning from observations alone. The variational family contains the exact smoother in deterministic and linear-Gaussian limits. Empirically, PR-Smoother captures multimodal posteriors in 4-dimensional Lorenz-96, remains accurate under ambiguous nonlinear observations and process noise in 40-dimensional Lorenz-96, and scales to joint state-parameter-bias inference in 16,384-dimensional Kolmogorov flow.

0.33

Unrolled gradients in disguise: bridging interpolation-based and Jacobian regularization for stable neural dynamics

cs.LG math.NA ·2026-11-02 ·Maya Janvier, Etienne Meunier
top venue similarity 0.59
Abstract · Accepted at NeurIPS 2026

Hybrid models and neural differential equations (NDEs) are becoming increasingly important for modelling physical systems; however, they often encounter stability and accuracy issues during long-term integration. Training on unrolled trajectories is known to limit these divergences but quickly becomes too computationally expensive due to the need to compute gradients over an iterative process, making this method impractical for large-scale physical systems (e.g. weather and climate forecasting). Two popular paradigms for improving the stability of learned dynamics are to train on interpolated or noisy samples or to regularize the Jacobian of the learned representation. In this work, we demonstrate that these paradigms can be understood under a common lens and that they both correspond to an approximation of the gradients obtained in an unrolled learning strategy. Building on this understanding, we derive a principled and complete approach to regularize training and demonstrate its impact on the stability of learned dynamical systems.

0.39

Multifidelity Operator Inference for Dynamical Systems

cs.CE stat.MLcs.LGmath.NA ·2026-11-12 ·Vignesh Sella, Anirban Chaudhuri, Karen Willcox
similarity 0.59
Abstract · 19 pages, AIAA SciTech Forum 2027 (Uncertainty Quantification Conference)

This paper presents a multifidelity (MF) formulation of Operator Inference (OpInf) for learning non-intrusive, physics-based reduced-order models (ROMs) of nonlinear dynamical systems. OpInf learns reduced operators from projections of snapshot data by solving a least squares regression problem. However, generating high-fidelity snapshots can be computationally expensive, limiting parameter coverage and the temporal extent of training trajectories for many aerospace applications, which can lead to inaccurate or unstable ROM predictions. This work proposes MF-OpInf, which combines limited high-fidelity snapshots with more plentiful low-fidelity snapshots through a control-variates-inspired MF least squares formulation to learn a single set of reduced operators across multiple trajectories. Low-fidelity trajectories provide additional parameter coverage and extend beyond the high-fidelity training time horizon. The low-fidelity snapshots are also used to construct an improved reduced basis through weighted proper orthogonal decomposition. We demonstrate MF-OpInf on a nonlinear reaction-diffusion problem with parametrized sinusoidal forcing and a two-dimensional incompressible flow past a cylinder with a parametrized inlet pulse. In these experiments, under an equal training simulation budget, MF-OpInf reduces the mean relative prediction error at unseen parameters by up to $87\%$ for the reaction-diffusion problem and $28\%$ for the cylinder flow problem over the test time regime, which extends beyond the high-fidelity training time horizon. These results demonstrate that MF-OpInf can improve temporal extrapolation and prediction at unseen parameters without increasing the training simulation budget.

0.16

Physics-informed Diffusion Generative Model for Time-Series Data Synthesis in Dynamic Systems

cs.LG ·2026-08-11 ·Haiteng Wang, Yunfei Zhu, Tao Wang, Yikang Li, Jiabao Dong +2 more
similarity 0.58
Abstract · 27 pages; 5 main figures and 4 extended data figures

Industrial time-series signals, such as turbine temperature and rotational speed in aero-engines, are essential for monitoring the health and operational status of complex dynamical systems. However, collecting such data is often limited by harsh environments (e.g., high temperature and high pressure) and the high cost of experimental testing. To address this challenge, we introduce PhysDGM, a stepwise physics-embedded diffusion generative model for synthesizing time-series data that are consistent with the underlying physical laws of dynamical systems. PhysDGM embeds physical laws directly into each reverse diffusion step of the generative process, ensuring trajectory-level physical consistency, rather than enforcing constraints only at the final output. A large-scale AI-synthetic dataset (4.4 million samples, 20x scale-up) constructed by PhysDGM demonstrates strong fidelity across 34 datasets spanning turbofan engines, aero-engines, batteries, and chemical processes. After incorporating the synthetic data, the downstream task performance substantially surpassed that using real data alone by 48% for remaining useful life prediction, 15% for health indicator estimation, 22% for state-of-health assessment, and 20% for fault diagnosis. Moreover, it requires 10-20x less training data than existing approaches, substantially reducing the high cost of data collection in dynamical systems. We further demonstrate PhysDGM's potential in identifying early-stage faults in aero-engines by incorporating AI-synthesized data. In summary, PhysDGM provides a solid foundation for generating physically consistent industrial time-series, paving the way for expanding physics-guided AI into diverse data-scarce environments, including both industrial machinery and complex chemical reaction dynamics.

0.10

Learning smooth dynamics via Kinematic Interpolants

cs.LG stat.ML ·2026-10-15 ·Yiheng, Jiang, Youssef Marzouk, Avishek Joey Bose, Aram-Alexandre Pooladian
similarity 0.58
Abstract · 22 pages, including appendix, 4 figures

Inferring dynamics from real-world experimental data is inherently ambiguous, as many plausible dynamical systems can explain the same positional observations at measurement times. For higher fidelity modeling of applications ranging from single-cell RNA to vortex dynamics and even flocking of birds, scientific observables increasingly also include velocity estimates that serve to resolve this issue. However, incorporating this rich information in a scalable manner, free of simulation or unnecessary approximations, has remained a difficult challenge. In this paper, we introduce Kinematic Interpolants (KI), a novel framework that extends the seminal methodology of stochastic interpolants to infer nonlinear dynamics across multiple snapshots in phase space, i.e., observables with position and velocity measurements. Empirically, we demonstrate that across several scientific datasets, KI achieves superior reconstruction of the underlying dynamics compared to existing baselines while requiring only a fraction of the training time.

0.29

Extracting Single-Mode Rayleigh--Taylor Instability dynamics from data via SINDy

cs.LG physics.flu-dyn ·2026-11-05 ·Chuanxing Wang, Hui Luo, Guohuai Zhu, Hongbo Cai, Shaoping Zhu +1 more
similarity 0.58
Abstract

Rayleigh-Taylor instability (RTI) is of fundamental importance in fields such as inertial confinement fusion and supernova explosions, and its evolution is commonly described by potential--flow theory and buoyancy--drag models. However, both types of models struggle to accurately capture the overshoot behavior of bubble and spike velocities, as well as the subsequent reacceleration stage. To address these limitations, we develop a physics-constrained, data-driven framework based on the integral formulation of Sparse Identification of Nonlinear Dynamics (SINDy), which extracts low-dimensional dynamical equations for bubble and spike evolution directly from data. By introducing the nondimensional initial amplitude $A_0 = kη_0$ as an explicit parameter, we identify distinct dynamical equations for the bubble and the spike based on data spanning multiple Atwood numbers and initial amplitudes. The resulting low-dimensional dynamical equations not only reproduce the overshoot behavior of the velocity with good accuracy, but also capture the reacceleration stage well, while maintaining high predictive accuracy at unseen values of the wavenumber, acceleration, and Atwood number. This work provides a physics-constrained, data-driven framework complementary to conventional potential-flow and buoyancy--drag models, accurately describing the dynamical evolution of the bubble and spike at high Atwood numbers, and provides a new perspective for directly extracting the dynamical equations of interfacial instabilities from data.

0.26

Opal.jl: a comprehensive, composable framework for data assimilation in Julia

cs.MS ·2026-08-25 ·Nicholas Mueller
benchmark similarity 0.58
Abstract · 23 pages, 24 figures

Data assimilation (DA) and inverse modelling are indispensable tools for combining physics-based models with observations, yet the software that implements them is often fragmented: sequential (Kalman and particle) filters and variational (3D/4D-Var) estimators are typically developed as separate codebases, each tied to a specific class of forward model - for example, simple time-marching schemes for ordinary differential equations (ODEs), or full finite element (FE) discretisations of partial differential equations (PDEs). In this work, we present Opal.jl, a Julia package that overcomes this fragmentation by providing a unified environment for a wide range of DA methods and forward model backends, all accessible behind a single high-level interface. Starting from a handful of basic methods, complex inference tools can be built by composing them with advanced capabilities, such as covariance localisation/inflation, online noise covariance estimation, bias-aware correction, and kriging-based calibration of reduced-order surrogates. The package integrates natively with the SciML ecosystem for ODE-governed systems, and with Gridap/GridapROMs for both full-order and reduced-order discretisations of PDEs. Notably, the API is designed to allow a reduced-order surrogate to replace a full-order solver with no change to the code, even at the driver level. We demonstrate the library on a Lorenz-63 benchmark, on a Van der Pol oscillator problem with biased observations, on a turbulent Navier-Stokes flow past a square cavity, where the unknown Reynolds number is inferred from sparse velocity and pressure measurements, and finally on a heat equation using a reduced-order surrogate instead of a more standard full-order model.

0.24