CS Paper Radar

ScaleLUT: A Fully-Parallel Configurable LUT-Based Accelerator for Real-Time Multi-Scale Super-Resolution

Boyu Li, Chenchen Ding, Zhilin Ai, Wenqing Shi, Baizhou Jiang, Wenyong Zhou, Binxiao Huang, Jiachen Ren, Hao Yu, Ngai Wong

cs.AR ·submitted 2026-09-15 01:56 UTC · v1
published

Abstract

Real-time super-resolution (SR) remains challenging for edge devices because deep-learning-based methods require substantial multiply-accumulate (MAC) operations, resources, and power. Lookup-table (LUT)-based SR reduces computation by replacing convolutional inference with table queries, but existing methods still suffer from limited speed, large storage overhead, and poor scalability across upsampling factors. We present ScaleLUT, a hardware-oriented LUT design framework and fully parallel reconfigurable accelerator for real-time multi-scale SR. ScaleLUT combines a hardware-friendly YUV-domain strategy with power-of-two kernels and rotation ensemble to improve receptive-field coverage while reducing LUT dimensionality; division operations are replaced by shifts. These designs reduce memory by 18.4% over state-of-the-art LUT-based SR methods. ScaleLUT supports arbitrary input resolutions and configurable x2^n upsampling factors using a deeply pipelined, massively parallel architecture. Implemented on a Xilinx ZCU102 FPGA, it achieves real-time 4K SR at 95.3 FPS for x2 upscaling at 300 MHz. Compared with existing SR accelerators, ScaleLUT uses at least 58.6% fewer LUTs, 41.1% fewer flip-flops, zero DSPs, and 42.0% lower power, while delivering 10x and 1.2x speedups over the best CPU-based SR implementation and prior FPGA-based SR accelerators, respectively. These results demonstrate the effectiveness of joint LUT algorithm-hardware co-design for practical and energy-efficient edge SR deployment.

Comment
7 pages. Accepted by the 32nd Asia and South Pacific Design Automation Conference (ASP-DAC 2027)

Closest papers

Nearest neighbours by meaning across the whole index.

Progressive Multi-Scale Super-Resolution via Cascaded Bicubic Anchors and Inter-Scale Mutual Refinement

cs.CV cs.LGeess.IV ·2026-11-02 ·Chun-An Lin, Yu-Chia Chang, Chi-Mao Fan, Yen-Chieh Ouyang, Tsung-Jung Liu
code/data similarity 0.69
Abstract · 14 pages, 7 figures, 7 tables. Submitted to an IEEE journal. Code and pretrained models will be released at https://github.com/julian135707/…

Super-resolution networks are trained for one magnification factor, so several output resolutions require several models. We propose PMS-SR, a progressive single-input multiple-output network that produces x2, x4, and x8 results in one forward pass, with a Transformer backbone on the low-resolution grid. In Stage 1, each scale is predicted as a residual over the detached bicubic upsampling of the previous scale's prediction. With Dirac and zero initialization, training starts exactly from the bicubic cascade, and each head adds only the band the previous scale lacks. In Stage 2, inter-scale mutual refinement couples the scales in both directions through space-to-depth feedback, deformable alignment, and per-pixel fusion, so x8 features refine the x2 output. Trained on DF2K, the 7.95M-parameter model achieves a higher PSNR than every compared multi-scale method at x4 and x8 on all five standard benchmarks. At x8, it outperforms the x8-specific DRN-L on all of them, leads all compared methods on Urban100, and is within 0.13 dB of the best result elsewhere. Against three single-scale SwinIR-M models, PMS-SR uses 22% of the parameters, runs 2.9x faster on BSD100 inputs, and its outputs agree 6.7-12.4 dB more closely. Code and pretrained models will be released at https://github.com/julian135707/PMS-SR upon acceptance.

0.36

FAME: An FPGA-Based Platform for Approximate Multipliers Evaluation with Pattern-Guided DNN Retraining

cs.AR cs.LGcs.PF ·2026-09-15 ·Rappy Saha, Nima Amirafshar, Jude Haris, Nima Taherinejad, José Cano
publishedcode/data similarity 0.68
Abstract · Accepted at the 38th IEEE/SBC International Symposium on Computer Architecture and High Performance Computing (SBAC-PAD) 2026

Approximate multipliers can reduce hardware area and energy consumption in Deep Neural Network (DNN) inference; however, they introduce computational errors. Assessing the accuracy of numerous approximate multiplier designs across diverse DNN models and large-scale datasets remains challenging due to prohibitive evaluation times. This overhead primarily stems from the slow emulation of approximate multiplier behavior using look-up tables (LUTs) on CPU and GPU platforms. Moreover, the resulting accuracy degradation must be carefully quantified and, if necessary, mitigated (e.g., through retraining), further increasing the overall evaluation cost. To address these challenges, we propose FAME, an FPGA-based platform for evaluating approximate multipliers. The platform exploits the reconfigurable logic of Field-Programmable Gate Arrays (FPGAs) to implement approximate multipliers directly in hardware, eliminating the need for LUT-based emulation on CPU/GPU platforms and thereby enabling efficient DNN inference while significantly reducing evaluation time on large datasets. Furthermore, we introduce a pattern-guided DNN retraining technique to mitigate accuracy degradation induced by approximate multipliers. Specifically, retraining is guided by multiplier-specific patterns to effectively recover potential accuracy losses. We evaluate FAME using two DNN models, ResNet-18 and MobileNetV2, on the ImageNet dataset across 27 approximate multipliers. During inference, our approach achieves up to a 3.47x speedup in approximate multiplier evaluation compared to prior LUT-based emulation methods. Furthermore, the proposed retraining technique improves accuracy by up to 65.5% over existing retraining approaches for the evaluated multipliers. The code is publicly available at: https://github.com/gicLAB/FAME

0.28

ReDT: Resolution-Decoupled Visual Geometry Transformer

cs.CV ·2026-10-18 ·Abteen Arab, Guile Wu, Dongfeng Bai
similarity 0.68
Abstract · Technical report

We introduce ReDT, a feed-forward visual geometry transformer designed to scale multi-view reconstruction to high-definition (HD) inputs. Existing visual geometry transformers are typically trained at fixed, standard definition (SD) resolutions and exhibit degraded reconstruction quality and poor computational scaling to high input resolutions. While recent efficient architectures reduce the complexity of inter-frame attention, expensive intra-frame and encoder attention remain largely unaddressed, making HD reconstruction impractical with existing architectures. ReDT addresses both limitations with a resolution-aware architecture designed to scale to high-resolution inputs. The key idea of ReDT is to first map each view to a fixed-size set of basis tokens, compute correspondences in this compact constant-size basis space, and then project the outputs back to the original resolution for dense prediction. By decoupling the internal representation from input resolution during attention, ReDT substantially reduces the computational cost of high-resolution 3D reconstruction and improves model performance at all resolutions. Extensive experiments on multiple datasets spanning SD to FHD (2K) show that ReDT outperforms state-of-the-art visual geometry transformers in both reconstruction quality and computational efficiency. For instance, on the ETH3D (2K) dataset, ReDT achieves a $16\times$ speedup, a $34\%$ reduction in peak GPU memory usage, and a $33\%$ reduction in chamfer distance over VGGT-$Ω$. \href{https://redt.github.io}{Project Website.}

0.20

LEAF: LUT-aware Efficient Attention on FPGAs

cs.LG hep-ex ·2026-10-19 ·Arianna Cox, Chang Sun, Lauri Laatu, Benedikt Maier, Aadeesh Sharma +5 more
publishedbenchmark similarity 0.67
Abstract · Accepted for the 9th Workshop on Machine Learning and the Physical Sciences (ML4PS 2026)

We introduce Lookup-table (LUT)-aware Efficient Attention on FPGAs (LEAF). LEAF is the first nanosecond-scale LUT-aware transformer for FPGAs. Deploying transformers that are large enough to perform well, small enough to fit on an FPGA, and fast enough to meet the sub-microsecond timescales required by real-time systems such as those at CERN remains difficult, since the same attention mechanism that gives these models their high expressivity also makes them costly to implement in hardware. LEAF converts the query, key, and value projections and the final output feed-forward layer into FPGA-native layers with LUT-aware training, creating the first LUT-aware transformer and linformer layers built for ultra-low-latency inference. Attention resists LUT-aware training because it multiplies two activations where the method needs a constant weight to tabulate; LEAF tabulates the attention block's constant matrix-vector multiplications and leaves the rest in arithmetic form. On a standard jet tagging benchmark this improves accuracy by 1.8 percentage points while using 2.9 times fewer LUTs than the previous state-of-the-art sub-microsecond transformer at the same input size. Our most efficient LEAF-based linformer with 64 input particles reaches 80.4% classification accuracy at 28k LUTs and 35ns.

0.34

Accelerating Data Preprocessing for Efficient Vision Model Inference on Jetson Edge Device

cs.PF ·2026-08-27 ·Tian Chen, Nawras Alnaasan, Jinghan Yao, Aamir Shafi, Hari Subramoni +2 more
similarity 0.67
Abstract

Data preprocessing is a crucial part of deep learning workflows on edge devices. However, decoding data saved in JPEG format is very compute-intensive and occupies a major portion of the preprocessing pipeline. Therefore, increasing the decoding speed is vital for improving overall throughput, especially for inputs with large image sizes, which are often subject to preprocessing bottlenecks. On the other hand, edge devices are equipped with specialized hardware units to accelerate media processing and image decoding. For instance, the NVIDIA Jetson platform possesses a dedicated NVJPEG unit. These units can be used to enhance the performance of the preprocessing pipeline. This paper introduces the utilization of such specific hardware acceleration units for offloading decoding tasks. By combining this with a multi-instance approach, it allows for the parallelization of all compute resources including CPU, NVJPEG, GPU, and DLA in Jetson devices. In this work, we compare various potential pipeline designs. On ResNet18, ResNet50, and ResNet152, three models with different sizes, we evaluate the impact of batch sizes and image sizes, as well as the characteristics of GPU/DLA inference. Finally, a fine-tuning experiment for multi-instance design has been conducted. The multi-instance design with a specific hardware decoding unit involved offers up to 30.02% speedup for large image sizes, compared with the most optimized design without it. Based on these findings, we demonstrate the benefits of using the NVJPEG unit in deep learning workflows and provide guidelines for tuning and optimizing edge inference workflows.

0.10

FoveaDet: Software-Hardware Co-Design of Foveated CNN-Transformer for Object Detection

cs.CV ·2026-11-11 ·Deepak Mewada, Apporva Saraf, Ashwin Lele
similarity 0.66
Abstract · 5 pages, 6 figures. Submitted to IEEE ISCAS 2027

Deploying real-time object detection on power-constrained edge platforms is challenging as processing full-resolution frames is often computationally redundant. Inspired by biological foveation which assigns variable resolution based on visual saliency, we propose a novel software-hardware co-design framework called FoveaDet. On the software side, FoveaDet dynamically identifies salient regions to predict fixation points, followed by aggressive patch pruning in Vision Transformers (ViT) to discard irrelevant background data. To mitigate slowdowns from sequential patch generation, we implement optimized interpolation and patch selection algorithms. Evaluated on standard GPUs, this foveated approach reduces floating-point operations by 65.4% to 92.2% and accelerates inference by 4.76x, while suffering a negligible mAP drop compared to dense baselines. To eliminate hardware bottlenecks, we complement the algorithm with a custom RISC-V core featuring specialized instructions to accelerate the foveated processing pipeline. FoveaDet provides a scalable, efficient architecture capable of unlocking advanced vision processing on severely constrained mobile platforms.

0.26

GigaBench: Benchmarking Learnable Representations for Gigapixel Image Compression and Super-Resolution

cs.CV ·2026-10-22 ·Matteo Fusconi, Alex Costanzino, Pierluigi Zama Ramirez, Luigi Di Stefano
publishedbenchmarkcode/datahot direction similarity 0.66
Abstract · Project page at https://matteofusconi.github.io/GigaBench Accepted at WACV2027

Learnable Representations (LRs) can fit parametric families of functions to diverse kinds of signals. These emergent neural-native data formats are gathering interest in the scientific community due to their compactness, resolution-agnosticism and amenability to direct neural processing. On the other hand, gigapixel images are becoming increasingly widespread across a variety of scientific, cultural, and industrial domains. In this paper, we present GigaBench, the first benchmark and experimental evaluation focused on deploying LRs with gigapixel imagery. GigaBench includes images collected, acquired, and synthetically rendered across diverse domains, and addresses image compression and super-resolution. We adapt a representative set of LRs, spanning Implicit, Hybrid, and Explicit methods, so as to operate reliably at the gigapixel scale on consumer hardware. Through systematic evaluation across reconstruction quality, model size, compression and inference times, we identify consistent trends across methods and suggest actionable guidance for future investigation.

0.52

4K Image Super-Resolution on Mobile NPUs: Mobile AI 2026 Challenge Report

cs.CV cs.AI ·2026-10-31 ·Andrey Ignatov, Georgy Perevozchikov, Radu Timofte, Fubin Ren, Shihao Wang +41 more
highly cited similarity 0.65
Abstract

Image super-resolution is widely used on mobile devices for upscaling various types of image data. This creates a need for efficient deep learning-based models that are not only performant but can also be deployed on neural processing units (NPUs) present in the majority of mobile and IoT chipsets. In this Mobile AI challenge, we address this problem and propose the participants to design fast solutions that can upsample images from Full HD to 4K resolution while running on popular mobile NPUs from Qualcomm and MediaTek. For this, the participants were provided with the DIV2K dataset and trained models to do an efficient 3X image upscaling. The competition had two tracks: in the first track, the models had to be fully quantized (INT8), and the runtime of all models was evaluated on the Qualcomm Snapdragon 8 Elite Gen 5 NPU. In the second track, the participants were developing floating-point solutions that were evaluated on the MediaTek Dimensity 9500 NPU. Top solutions proposed in this challenge are able to reconstruct 4K images under 5 milliseconds while reaching a PSNR score of 30 dB. A comprehensive description of the models developed in the challenge is provided in this paper.

0.51