CS Paper Radar

IL-ACT: Imitation Learning with Adaptive Cartesian Tracking Control for a 30-ton Excavator

Mehdi Heydari Shahna, Seihun Kim, Soyi Jung, Soohyun Park, Jouni Mattila, Joongheon Kim

cs.RO ·submitted 2026-09-15 06:22 UTC · v1

Abstract

Autonomous excavator control is challenged by coupled kinematics, actuation lag, and uncertainty. We propose imitation learning and adaptive Cartesian tracking (IL-ACT), a novel motion control framework for a 30-ton-class excavator. An anchored, 14-input imitation policy pretrained on operator demonstrations generates nominal joint rates; adaptive Cartesian feedback and gated gain/bias estimation correct these commands before a stopping-distance governor constrains joint-reference generation. Simscape evaluation covers 100 sequential goals and spiral, figure-eight, and rounded-raster tracking, including 88 additional runs across three training seeds, two initializations, and speeds, under hydraulic response and sensing conditions. Compared with Teacher+ACT, IL-ACT completes all goals with shorter duration and lower terminal errors under both response conditions. Telemetry-initialized IL-ACT lowers RMSE in all 24 figure-eight and rounded-raster seed comparisons and lowers additional-load spiral mean RMSE by approximately 29%. Original spiral RMSE also improves over IL-only and PID. Under a shared sensor-noise realization, telemetry-initialized IL-ACT achieves 27.67% lower mean RMSE than Teacher+ACT; enabling estimation reduces mean RMSE by $22.44\%$ relative to the frozen estimator. Pretrained-weight effects remain mixed, and the original teacher comparison exhibits a spiral RMSE--maximum-error tradeoff. Analysis establishes bounded adaptive states and Cartesian feedback, with reference admissibility conditional on governor feasibility.

Closest papers

Nearest neighbours by meaning across the whole index.

From Target Selection to Digging: A Learning-Based Framework for Continuous Autonomous Excavation

cs.RO ·2026-09-24 ·Shuai Zhao, Ji-an Pan, Quantao Yang, Zheng Wang, Chaoyi Chen +2 more
similarity 0.68
Abstract · 8 pages, 7 figures, 4 tables. Updated author affiliations; technical content unchanged

Repeated excavation continuously reshapes pile geometry, requiring an autonomous excavator to adapt its digging targets and coordinate motion across successive excavation cycles. We present a learning-based framework for continuous autonomous excavation that integrates terrain-aware target selection with reinforcement- and imitation-learning controllers. The framework separates target-conditioned motion from local digging: a shared task-conditioned RL policy controls waypoint-guided approach and loaded transport, while an IL policy learns vision-based digging and lifting from expert demonstrations. Digging targets are selected from LiDAR elevation maps and converted into bucket-tip waypoints for motion control. The control architecture coordinates the learned policies and deterministic unloading through a shared motion interface. The complete system is deployed on a scaled hydraulic excavator with multimodal sensing and closed-loop actuator control. Offline replay and physical experiments demonstrate more consistent target selection, shorter local motion time, and increased payload compared with the respective baselines. The learned digging policy achieves a mean payload of 6.52 kg per completed cycle, compared with 2.68 kg for Fixed Dig. Three five-scoop runs further demonstrate consecutive autonomous excavation under continuously changing pile geometry.

0.22

Precision at Speed: Sample-Efficient Online Model-Based Reinforcement Learning for Hydraulic Excavator Control

cs.RO cs.LGeess.SY ·2026-09-25 ·Claudio Canales, Fang Nan, Marco Hutter, Javier Ruiz-del-Solar
similarity 0.67
Abstract

Precise, high-speed control remains challenging for robots with complex actuation dynamics. Learning directly on hardware is further constrained by the cost of real-world interaction. We present an online model-based reinforcement learning framework that learns a probabilistic dynamics ensemble model from scratch for sampling-based model predictive control. A precision-gated contouring objective conditions the progress reward on path accuracy, prioritizing precision over speed. In a data-driven excavator simulator, the framework achieves higher sample efficiency than the evaluated model-based reinforcement learning baselines. We validate the framework by learning directly on an 11.5-ton Menzi Muck M445 hydraulic excavator, without demonstrations or simulation pretraining. After 20 minutes of interaction, the controller reaches tracking accuracy comparable to prior learned controllers trained on 100-150 minutes of data. After 40 minutes, it sustains sub-centimeter mean path error at high operating speeds.

0.21

Task-Space Imitation Guidance for Efficient Reinforcement Learning

cs.RO ·2026-10-05 ·Salar Asayesh, Hossein Darani, Todd Cao, Evgeny Andriash, Mani Ranjbar
publishedsurvey similarity 0.66
Abstract · Accepted at CoRL 2026

We introduce Task-Space Imitation Guidance for Efficient Reinforcement Learning (TIGER), a reward-construction and pretraining framework for sparse-reward tabletop robotic manipulation. TIGER treats an action-chunked imitation policy not as an executable controller or action prior, but as a local task-space progress estimator: predicted action chunks are converted, using controller-aware action-to-motion mapping, into short-horizon end-effector references, and the RL agent receives dense progress rewards toward these references while the sparse environment reward remains the dominant objective. During pretraining, TIGER uses imitation-guided look-ahead signals to relax conservative value penalties for actions predicted to make task-space progress, reducing off-manifold exploration during early online RL. Across simulation and real-robot experiments, TIGER improves early sample efficiency and reduces measured safety violations while matching or improving final success rates relative to prior RL and IL-RL baselines on the evaluated tasks. Videos and an overview of this work are available at https://sanctuary.ai/news/tiger/.

0.36

Driving the Style: Velocity-Conditioned Whole-Body Control from Motion Demonstrations

cs.RO ·2026-11-16 ·Murad Dawood, Oezge Drama Berkenkamp, Antonio Gonzales Marin, Nutan Chen
similarity 0.65
Abstract

Achieving human-like behavior on humanoid robots has advanced rapidly by leveraging motion-capture demonstrations rather than hand-crafted cost functions. Adversarial imitation supplies a style signal that lets a policy fulfill a task while adhering to a desired style, but is difficult to transfer to hardware. Whole-body tracking through reinforcement learning instead deploys reliably and imitates demonstrations faithfully, but the resulting policies are conditioned on the future reference, so they require a reference trajectory at runtime and can fail when the motion differs from the training data. We train a humanoid policy directly with whole-body tracking rewards while restricting its actor to compact locomotion commands and robot observations. Reference motion supervises the reward and privileged critic, without supplying reference joint trajectories to the actor or requiring teacher distillation. The demonstrated style is thereby encoded in the policy through the tracking reward, so the robot reproduces the whole-body style under commanded velocities. Trained on a single random-walk motion and commanded with velocity profiles from held-out motions, our policy reaches at least 98\% success in simulation and completes every trial on the Unitree G1. On held-out slow walking, whole-body tracking drops to 2\% success and command-conditioned distillation to 56\%, and both fail on the real robot. On the trained motions, the joint position error of our policy stays within 8\% of whole-body tracking, and it has a higher style coverage than adversarial motion priors (AMP), which fell on the real robot without a safety crane.

0.20

FOCUS: First-Order Control Using Optimal Transport Supervision for Imitation from Observations

cs.LG cs.RO ·2026-10-30 ·João A. Cândido Ramos, Lionel Blondé, Hugues Vinzant, Jacopo Castellini, Alexandros Kalousis
published similarity 0.64
Abstract · Accepted at the NeurIPS 2026 Workshop on Physical Understanding for Decision-Making

Imitation learning from observations must recover behavior from state-only demonstrations without known temporal correspondence. Differentiable simulators provide pathwise policy gradients, but differentiating through long, contact-rich trajectories can make optimization unstable. We introduce FOCUS, which combines local optimal-transport alignment with short-horizon differentiable actor-critic learning. FOCUS matches agent rollout windows to multiple sampled expert segments using a soft best-of-$K$ objective that emphasizes locally compatible matches. The resulting transport-based costs provide differentiable imitation rewards, while a learned critic bootstraps value beyond the rollout horizon. FOCUS requires neither temporally aligned trajectories nor expert-aligned initialization or teacher forcing. Across contact-rich locomotion tasks in DFlex, including a musculoskeletal humanoid controlled by 152 muscle activations, FOCUS improves sample efficiency and training stability over adversarial imitation-from-observation methods and prior differentiable imitation baselines.

0.26

Beyond State-as-Action: Exploiting Command-State Discrepancy for Robot Imitation Learning

cs.RO ·2026-09-27 ·Peiyan Li, Yueran Tao, Enhao Zhang, Zhixuan Zhao, Chenghao Yue +8 more
code/data similarity 0.64
Abstract · 8 pages, 10 figures. Corrected affiliation name to SEEN-E Robotics, added the project page link to the abstract, and clarified wording and f…

Constructing action targets from measured robot motion is an established approach in imitation learning. Under interaction constraints, however, command-state discrepancy may reflect control demands that motion alone does not capture. We investigate when this information matters and how to exploit it. Across three real-robot tasks, task and phase analyses reveal larger supervision gaps under constrained interaction, while selective command retention provides evidence of locally useful command information. Building on these findings, we propose Command-State Discrepancy Weighting (CSDW), which accounts for robot response times and combines subsequent progress, persistent unmet demand, and demand changes into continuous weights for command supervision. The method requires no task-phase annotations or changes to policy architecture or inference. CSDW improves over uniform command supervision on constrained tasks, while methods perform similarly in the less constrained task. Project page: https://seen-e.github.io/CSDW/.

0.32

Diffeomorphic Hidden-State Steering: Improving Imitation Learning Policy Robustness through Expert Hidden-State Geometry

cs.RO ·2026-10-15 ·KwangBin Lee
similarity 0.63
Abstract · 9 pages, 2 figures

Small observation or action errors can compound during closed-loop execution and disrupt a trained imitation learning policy. We study whether the original expert demonstrations can improve robustness through test-time hidden-state steering without additional demonstrations or policy retraining. Our analysis of a trained policy finds that expert hidden-state variation is concentrated in relatively few dimensions, while the directions capturing this variation differ across regions. Motivated by this geometry, we propose Diffeomorphic Hidden-State Steering (DHS), which learns an invertible nonlinear coordinate map from expert hidden states obtained by replaying the demonstrations through the frozen policy. DHS attenuates coordinates with low expert variance more strongly than those with high variance, then maps the modified coordinates back to hidden-state space. This allows steering directions to vary with the current hidden state while retaining every coordinate. Across four simulated manipulation tasks, DHS improves mean success under observation noise over the unmodified Transformer policies. Controlled comparisons yield higher mean success with learned nonlinear coordinates than with linear coordinates under both hard projection and full-rank rescaling. Combining DHS with action smoothing improves mean success rate under observation noise in certain tasks compared with action smoothing alone.

0.20

Mulligan: Performance-Guided Data Collection for Efficient On-Robot Learning

cs.RO cs.LG ·2026-10-05 ·Lars Ankile, Perry Dong, Rohan Bhowmik, Aneesh Muppidi, David D. Yuan +2 more
code/data similarity 0.63
Abstract · Project page: https://mulligan.page/

Learning from human demonstrations is a reliable way to teach robots new tasks, but the gains from each additional demonstration shrink as the policy improves. Continued improvement can instead come from supervised deployment, where an operator places the objects and intervenes when the policy fails. We ask how to maximize improvement from a fixed budget of supervised episodes on high-precision manipulation tasks with wide ranges of object placements. We observe that failures can concentrate in a small subset of initial states, so uniform collection spends much of the operator's time on states the policy already handles. Mulligan makes the initial-state distribution a decision, starting each round's episodes at observed failures and untried states. To further improve data efficiency, we augment interactive imitation learning with a value function trained on all data, including failures that imitation discards. Across three real-world tasks evaluated on 2,550 held-out, blinded episodes and two simulated tasks, Mulligan outperforms uniform initial-state sampling at matched collection budgets, and combined with value-based action selection, HiL-IDQL+Mulligan, improves final real-task success by 10-34 percentage points. With operator interventions, the human-robot team completes 98% of collection episodes, remaining productive while the policy learns. Videos, code, and data are available at https://mulligan.page/.

0.29