CS Paper Radar

Constructions of LCPs and LCD codes from twisted Reed-Solomon codes

Shuo Sun, Wenwen Chen, Chao Liu, Yaozong Zhang, Xiaoqiang Wang

cs.IT ·submitted 2026-09-15 09:54 UTC · v1

Abstract

Linear complementary pairs (LCPs) and linear complementary dual (LCD) codes have important applications in orthogonal direct-sum masking (ODSM), which provides effective countermeasures against side-channel attacks and fault-injection attacks. While LCD codes have been extensively investigated, comparatively fewer results are available for general LCPs. In this paper, we further investigate LCPs of twisted Reed--Solomon (TRS) codes. We derive necessary conditions for two TRS codes to form an LCP and establish several sufficient conditions and explicit constructions. We also study LCD codes constructed from TRS codes and investigate the security parameters of the resulting LCPs. Furthermore, under suitable conditions, we obtain MDS LCPs of TRS codes.

Closest papers

Nearest neighbours by meaning across the whole index.

Linear programming bounds for binary and ternary LCD Codes

cs.IT cs.DMmath.CO ·2026-09-08 ·Ming-Hsuan Kang, Maosheng Xiong
similarity 0.64
Abstract · This is the final version. Comments are welcome

We derive linear programming (LP) bounds on the minimum distance of binary and ternary linear complementary dual (LCD) codes by imposing arithmetic constraints on their weight enumerators. Special values of the weight enumerator give finitely many Gauss phases, each of which yields linear equations in the ordinary weight-distribution variables. The resulting bounds strengthen the real-valued LCD counting LP without introducing additional variables; both the number of branches and the number of added equations per branch are bounded independently of the code length. Exact certificates establish strict improvements for 62 binary parameter pairs of length at most 20 and 39 ternary pairs of length at most 14. For four binary pairs, the bounds also improve the joint-weight-enumerator LP while using fewer variables per branch. These comparisons show that Gauss-phase information provides a compact strengthening of existing LP relaxations for LCD codes.

0.16

Constructions of Secure Convertible Codes

cs.IT ·2026-10-26 ·Manasa Suresh B P, Vinayak Ramkumar, Myna Vajha
similarity 0.62
Abstract

Secure convertible codes, introduced by Zhang and Rashmi, achieve secrecy capacity under a passive eavesdropper model in which an eavesdropper is allowed to access any $\ell$ symbols from the initial and final codewords. In this paper, we construct two families of access-optimal secure convertible codes. The first family of codes based on Maximum Rank Distance (MRD) codes is constructed for all parameters in the merge and split regimes and requires a large field size. The second family of codes, constructed using Generalized Reed-Solomon codes, uses smaller fields but is applicable only for certain parameters in the merge and split regimes.

0.13

On Twisted Roth-Lempel Codes

cs.IT ·2026-09-15 ·Huiyue Lei, Haojie Gu, Jun Zhang, Haiyan Zhou
similarity 0.61
Abstract

In 1989, Roth and Lempel constructed a well-known family of non-Reed-Solomon maximum distance separable (MDS) codes. For decades, this family of codes has attracted extensive research attention due to its algebraic structure, low-complexity decoding, and broad applications in cryptography and data storage. In this paper, we present a class of twisted Roth-Lempel codes. We investigate their minimum distance, MDS and NMDS properties. Specifically, we determine the necessary and sufficient conditions for the TRL codes to have minimum distance n-k or n-k+1. Furthermore, we determine the necessary and sufficient conditions for the TRL code to be an MDS or NMDS code. Moreover, we show that the dimension of the Schur square of the TRL code is at least 2k+1, and thus the TRL code is a non-RS code inequivalent to the corresponding RL code.

0.33

New Constructions of Additive MDS TRS Codes

cs.IT ·2026-08-19 ·Anuj Kumar Bhagat, Ankit Yadav, Ritumoni Sarma
similarity 0.61
Abstract

Additive codes over finite fields generalize linear codes, and additive MDS codes provide a natural extension of linear MDS codes. In this article, we study additive twisted Reed--Solomon (TRS) codes and obtain new constructions of additive MDS codes. First, for additive TRS codes with twist $t=2$ and an arbitrary hook, we establish necessary and sufficient conditions for the codes to be additive MDS, thereby generalizing the results in Section 3 of [Jiayu Ma et al., New families of additive non-Reed-Solomon MDS codes]. In particular, we show that the existence of an additive MDS TRS code with $t=2$ and hook $h=0$ yields codes of larger lengths than those obtained for $t=2$ and $h=k-1$ in [Jiayu Ma et al., New families of additive non-Reed-Solomon MDS codes]. Next, we consider additive TRS codes with twist vector $\mathbf{t}=(1,2)$ and hook vector $\mathbf{h}=(0,0)$, and derive necessary and sufficient conditions for them to be additive MDS. We further establish the existence of such codes. Using the Schur square technique, we obtain mild conditions under which the constructed families are inequivalent to additive Reed--Solomon (RS) codes. Finally, we determine parity-check matrices for both families of additive MDS codes considered in this article.

0.23

Two variants of Twisted Reed-Solomon Codes

cs.IT ·2026-09-14 ·Haojie Gu, Huiyue Lei, Jun Zhang
similarity 0.60
Abstract

Generalized Reed-Solomon codes and twisted generalized Reed-Solomon codes provide important sources of maximum distance separable codes. In this paper, we study two variants obtained by introducing column twists and simultaneous row-column twists into Reed-Solomon-type evaluation codes. For the column-twisted family, we provide necessary and sufficient conditions for the code to be MDS in terms of explicit subset product conditions. Under the stated parameter assumptions, the Schur square has dimension 2k+1, which leads to MDS codes that are not equivalent to Reed-Solomon codes. For the row-column twisted family, we establish necessary and sufficient conditions for the MDS property in terms of elementary symmetric functions. The larger Schur-square dimension provides a further distinction from both Reed-Solomon codes and known twisted families, thereby yielding new non-RS MDS codes. Finally, explicit parity-check matrices and dual descriptions are obtained for both code families. These results provide a foundation for subsequent studies of self-orthogonality, hull dimensions, and applications to quantum-code constructions.

0.36

Systematic Derivation of Leakage in Massey Secret Sharing Schemes

cs.CR ·2026-11-02 ·Nadja Aoutouf, Daniel Augot
similarity 0.59
Abstract

Leakage attacks on secret sharing schemes can be based on the exploitation of partial information about individual shares to recover the underlying secret. In coding theory, linear exact repair schemes (LERSs) allow the recovery of a codeword symbol from limited information obtained from the remaining symbols. When applied to code-based secret sharing schemes, such repair schemes can be interpreted as recovering the secret from partial information about the shares, expressed in terms of subfield symbols. Guruswami and Wootters introduced the first explicit constructions of LERSs for low-rate Reed--Solomon codes that is optimal in terms of bandwidth. In this work, we first investigate the construction and algebraic properties of LERSs, building on the Guruswami-Wootters construction. We derive new explicit repair schemes from their construction and establish structural properties of the resulting schemes. Second, we further develop a systematic computational approach based on a Gr{ö}bner bases approach to identify leakage functions associated with LERSs for arbitrary linear codes. This approach enables us to investigate the existence and structural properties of LERSs across different code families and parameter ranges. We first applied our method to Reed-Solomon codes, which gave as further insights into the algebraic structure of LERSs. Moreover, by applying our method to generalized Reed-Muller and Tamo-Barg codes, we identify several LERSs that, to the best of our knowledge, have not previously been described in the literature.

0.03

Classification of binary, ternary and quaternary Hermitian LCD codes

cs.IT ·2026-10-22 ·Keita Ishizuka
similarity 0.59
Abstract

We extend the complete classifications of linear complementary dual (LCD) codes from length 15 to length 19 in the binary case, from length 10 to length 15 in the ternary case and from length 12 to length 13 in the quaternary Hermitian case. The classification rests on a reduction of the monomial equivalence of LCD codes to graph isomorphism on the coordinates, combined with canonical augmentation.

0.13

Generalized Hamming Weights and Subcode Support Weight Distributions of Twisted Reed-Solomon Codes

cs.IT ·2026-10-12 ·Chao Liu, Hao Chen, Dabin Zheng, Yaqi Chen
similarity 0.58
Abstract · 38 pages

In this paper, we determine the generalized Hamming weight hierarchies of two classes of twisted Reed--Solomon (TRS) codes. For TRS codes with one twist, we first determine all possible values of the generalized Hamming weights. We then give a complete characterization of the weight hierarchy in terms of the minimum distance of the dual code. Explicit conditions are derived for the minimum distances of the code and its dual, which make the whole weight hierarchy explicitly computable. As special cases, the obtained results recover several known characterizations for TRS codes to be MDS, NMDS codes, and $s$-gap AMDS codes. For TRS codes with two twists, we similarly determine the complete generalized Hamming weight hierarchy. In this case, the higher generalized Hamming weights are determined by the first two generalized Hamming weights of the dual code, for which explicit rank conditions are also obtained. In addition, we further determine the subcode support weight distributions of this class of single-twist TRS codes. More precisely, for each $1 \le r \le k$, we derive an explicit formula for the number of $r$-dimensional subcodes with a prescribed support size, thereby giving a complete description of the support distribution of subcodes.

0.22