CS Paper Radar

GANADI: Uncovering C/C++ OSS Reuse Genealogies via Pivotal Function-Based Clustering to Enhance Supply Chain Security

Dongyeon Kim, Seunghoon Woo, Heejo Lee

cs.SE ·submitted 2026-09-15 11:29 UTC · v1
top venue

Abstract

We present GANADI, a systematic approach for identifying C/C++ OSS reuse genealogies to enhance software supply chain security. Understanding OSS reuse genealogy is crucial for improving SBOM completeness and prioritizing security remediation across supply chains. Although existing approaches can identify reused compo- nents and vulnerabilities within a project, they fail to trace OSS reuse paths through intermediate projects, limiting their effectiveness in securing supply chain ecosystems. To address this limitation, GANADI constructs reuse genealogies by clustering downstream projects based on shared characteristics of origin-derived code (called pivotal functions), and then inferring reuse direction among the projects within each cluster. When applied to 20 widely reused OSS projects with over 1,500 propagation paths, GANADI achieved 84.85% precision and 95.76% recall in identifying reuse genealogies, outperforming existing approaches that achieved at most 23.21% recall. Leveraging OSS reuse genealogy for vulnerability detection, we identified 48 unpatched vulnerabilities in real-world popular C/C++ projects. Among them, 23 were patched following our responsible disclosure (including one CVE ID assigned), demonstrating the practical impact of genealogy-based vulnerability management.

Closest papers

Nearest neighbours by meaning across the whole index.

Propagation Model for SSC attacks: Why SBOM (tools) don't tell the whole truth

cs.CR ·2026-09-04 ·Ljubica Grgic, Lazar Maksimovic, Pavel Laskov
publishedpositioncode/data similarity 0.71
Abstract

Ensuring security of software supply chains (SSC) is indispensable in today's world of modern software practices. SBOM (tools) have been introduced as relevant building blocks to ensure the transparency of SSCs. However they have serious limitations in practices as their vulnerability detection and interpretation capacity is not sufficient to explain exploitability effects that can propagte through the whole chain. To address this gap, we propose a propagation-centred approach to SSC security and introduce a four-stage propagation model. We empirically evaluate four open-source SBOM tools against each stage using three projects and Log4j vulnerability as our test case. Our results show that current SBOM tools systematically support only Stage 1 (Structural Exposure) and Stage 2 (Vulnerability Class Presence) while Stage 3 (Code Reachability) and Stage 4 (Taint Path Analysis) require capabilities absent from the SBOM ecosystem. We argue that putting propagation effects at the centre of SSC security research is essential to prevent cyber risk evolving into systemic risks. Our research findings contribute to a future research and design of modern SSC security tools.

0.66

Sign Here: Attributing a Source for a More Trustworthy Software Supply Chain

cs.CR cs.SE ·2026-10-20 ·Derek Garcia
code/data similarity 0.70
Abstract

Software supply chain attacks continue to be on the rise, exploiting the trust that helps open source ecosystems thrive. Recent incidents like the Shai-Hulud worm and the Axios compromise demonstrate that a single malicious package can have wide reaching and devastating impacts overnight. These high profile attacks can be traced back to the same culprit: package registries. Although they are a useful convenience to pull prebuilt packages from, is such a commonly exploited component of the software supply chain worth the risk? In this paper, we investigate whether removing the registry from the developer workflow by building packages directly from source can serve as a malware prevention strategy - effectively removing an entire attack surface. Our hypothesis is that malicious packages avoid attributing a source to minimize visibility, while benign packages seek exposure and therefore link to their repositories. We evaluate this through three research questions: how effective is building from source at avoiding malware, how feasible is it to build from source in the current state of the supply chain, and how the building from source strategy compares to state-of-the-art security scanners. To do so, we (1) construct an aggregate dataset of 47,066 malicious packages from four academic and one industry malicious datasets source across npm and PyPI ecosystems, (2) build a snapshot index of all 3.9 million npm and 764 thousand PyPI packages, and (3) analyze all malicious samples alongside a statistically significant sample of 16,569 packages from each registry, totaling 33,138 packages. We find that simply checking for a source has a success rate between 87.7 and 99.9 percent of preventing malware, depending on the level of source vetting. Consequently, there is a significant lack of transparency within benign packages, with only 47.4 percent attributing a source an end user could build from.

0.20

Vulnerable Models in the AI Supply Chain: An Empirical Study of Adoption, Propagation, and Usage Patterns

cs.CR cs.SE ·2026-10-09 ·The Anh Nguyen, Triet Huynh Minh Le, M. Ali Babar
code/data similarity 0.70
Abstract

The rapid integration of Artificial Intelligence (AI) models has established a complex supply chain, but many of these shared artifacts harbor severe vulnerabilities such as insecure serialization and architectural backdoors. While prior efforts have extensively scanned model registries to flag malicious artifacts, a critical gap remains in understanding how developers actually adopt and integrate these unsafe models into downstream software systems. We bridge this gap by conducting a large-scale empirical study on the usage and propagation of 16,977 known vulnerable models on HuggingFace flagged by InsightDB. We track their prevalence across GitHub repositories, software packages, fine-tuning chains, and deployed applications. Our analysis reveals that, despite being publicly flagged, these vulnerable models appear in over 21,000 code locations across more than 5,000 open-source repositories, with 3,757 distinct flagged models (22.1\%) actively referenced in at least one project. To understand how these models are integrated in code and identify recurring usage patterns, we categorize and analyze the recurring patterns surrounding them via a customized pipeline that combines Code Property Graphs extraction with a tailored Frequent Subgraph Mining approach. Across all patterns, we find no evidence of provenance verification or model sanitization logic, with developers frequently bypassing security parameters or delegating trust to permissive framework defaults. These findings underscore that scanning model files alone is insufficient, highlighting the urgent need for context-aware security analysis and stricter integration guardrails at the application layer of the AI supply chain.

0.30

Measuring the Security of the Evolving Software Supply Chain: a Research Agenda

cs.CR cs.SE ·2026-09-08 ·Sarah Meriem Ourari
top venuesurveyposition similarity 0.68
Abstract · Accepted at IEEE ICSME 2026 , 6 pages , 3 figures

Software supply chain security has become increasingly critical due to the widespread reliance on third-party dependencies and the growing attack surface of modern software ecosystems. However, existing quantitative, measurement-based analysis and vulnerability management approaches remain largely fragmented and ecosystem-specific, limiting their ability to provide comparable risk assessments across environments. This paper presents a structured research plan, starting with a Systematization of Knowledge (SoK) to synthesize the current state of research and identify key gaps, highlighting the limitations in dependency modeling and vulnerability propagation analysis, particularly in the treatment of transitive dependencies and their real-world exploitability. Based on these insights, we argue for a unified measurement perspective capable of consistently representing and analyzing the cross-ecosystem dependency structure. We further identify emerging challenges introduced by AI-assisted software development, where coding LLMs are likely to contribute to new dependency patterns that are not captured by traditional Software Composition Analysis (SCA) tools. These shifts motivate a rethink of dependency modeling to account for evolving software-generation practices and their long-term structural impact on software security.

0.34

VEX-Bench: Benchmarking LLM Agents for Assessing Exploitability of Software Supply Chain Vulnerabilities

cs.CR cs.LGcs.SE ·2026-09-07 ·Jiahao Shi, Edward Tsien, Yifeng Di, Hongjiao Zhang, Yuan Tang +8 more
top venuebenchmarkcode/data similarity 0.68
Abstract · Accepted to EMNLP 2026

The software supply chain has become an increasingly exposed attack surface because of its reliance on intricate yet fragile dependencies. Existing defenses such as GitHub Dependabot often raise many false alerts because their coarse-grained matching cannot determine whether a vulnerable dependency is actually exploitable. Security analysts typically spend substantial time assessing vulnerability exploitability case by case. Recent LLM agents have emerged as promising candidates for this task given their advanced capabilities in coding and cybersecurity, yet no existing benchmark evaluates them on it. Prior benchmarks target zero-day settings, where agents detect and exploit previously unknown vulnerabilities. In contrast, software supply chain security focuses on how known vulnerabilities in upstream dependencies affect downstream projects. This requires agents to reason across repositories and determine whether an upstream vulnerability is exploitable in the downstream project. To address this gap, we introduce VEX-Bench, the first benchmark for evaluating LLM agents' ability to assess the exploitability of software supply chain vulnerabilities. It contains 75 real-world cases mined from GitHub and labeled by security experts, covering Python, Java, and Go. We evaluate nine models across three agent harnesses. While GPT-5.5 and Claude Opus 4.6 reach approximately 80% F1 on binary vulnerability-status classification, only GPT-5.5 surpasses 70% macro-F1 on fine-grained justification classification. This gap highlights the challenge of moving beyond binary exploitability assessment to identifying fine-grained exploitability reasons. Code and data: https://github.com/steven1518/vex-bench

0.77

An Empirical Study on CVE-based Vulnerabilities Propagation from one System to another System (IntraProject vs InterProject)

cs.CR cs.SE ·2026-11-10 ·Junaid Akram, Ali Hassan, Danish Vasan
code/data similarity 0.66
Abstract · 17 Pages, 14 Figures

Vulnerabilities in applications, including browsers, media players, online services and document readers, etc. are often exploited and cause a serious damage. The vulnerabilities could exist in your system maybe because of some coding errors, design oversights, outdated software, AI generated codes or maybe transferred from another system during development (e.g., code clones). The propagation of software vulnerabilities is a critical concern in cybersecurity. This study examines the root cause problem of vulnerabilities propagation with experiments. We analyzed the propagation of CVE (Common Vulnerabilities and Exposures) based vulnerabilities within and between different software projects (IntraProject vs. InterProject). We performed several experiments on CVE based vulnerability dataset (retrieved from NVD source) by using our vulnerability detection tool (SQVDT). In the results, we discovered similar patterns of vulnerable code in several very famous recently used software, including latest version of Linux, Android operating systems, and in thousands of open source projects available on GitHub. We found several very high severity level (CVSS) vulnerabilities that propagated from one system to another system, just because of copy/paste (reuse) the code. Furthermore, we performed an empirical evaluation and verification of these vulnerable patterns that propagated to other systems by also considering the frequency of their propagation. Finlay, we recommended the impact of these vulnerabilities propagation on the interconnected systems.

0.43

Fixed Detectors, Moving Code: How Well Do Static Security Analyzers Hold Up over a Decade of C/C++ Evolution?

cs.CR cs.SE ·2026-11-02 ·Junhua Tang, Zhengsong Zhang. Haipeng Cai
code/data similarity 0.66
Abstract

Static application security testing (SAST) tools are often deployed on the assumption that detectors configured today will remain effective on future code, including previously unknown vulnerabilities. We test this assumption using 20,000 vulnerable and fixed C/C++ cases from 1,116 open-source projects (2016-2025), evaluated with three CodeQL releases, three Infer releases, and one Semgrep configuration. To distinguish temporal effects from shifts in code composition, we compare yearly populations, project- and label-matched year pairs, and within-project trajectories. We investigate the largest within-project declines through repair diffs, detection predicates, alert locations, and execution logs, while accounting for failed, degraded, and costly analyses. Under changed-file case-label scoring, overall F1 ranges from 0.066 to 0.478, but count-based AUROC stays near chance (0.495-0.526). Newer CodeQL releases attain higher F1 alongside nearly parallel rises in recall and false-positive rate, not stronger separation of vulnerable from fixed cases. In project-matched year pairs, CodeQL R2024 has negative mean later-minus-earlier F1 at every source-year gap, whereas Infer v1.1 and v1.3 have positive means throughout. Among selected drops, only 6 of 39 CodeQL and 2 of 620 Infer findings overlap a changed repair line. For Semgrep, 78.96% of cases show parser or timeout diagnostics even though every run reports success. These results suggest that apparent changes in temporal SAST effectiveness can arise from broader alerting, changing analysis coverage, and incidental findings, not solely from losses in vulnerability detection. Evaluations of temporal sustainability should fix detector conditions, control for projects, inspect repair-level evidence, and report failed or degraded analyses.

0.34

ChainAgent: Automated Chainable Vulnerability Discovery in PHP Web Applications

cs.CR cs.AI ·2026-11-19 ·Xinyi Wang, Yeting Li, Shizhe Cui, Jiaming Guo, Qin Mai +7 more
similarity 0.65
Abstract

High-impact attacks on PHP web applications often chain limited-capability vulnerabilities with other flaws or intended behaviors. Discovering these chains requires identifying flaws and the dependencies enabling capability composition. Existing vulnerability discovery techniques analyze flaws in isolation, while attack planning assumes known components. This separation makes it difficult to discover previously unknown components whose security relevance becomes apparent only through their potential roles in an exploit chain. We present ChainAgent, a goal-directed LLM-agent framework that jointly discovers exploit-chain components and their capability dependencies in source code. Guided by an empirical study of 386 real-world web exploit chains, ChainAgent represents vulnerabilities and functional gadgets--intended program behaviors that can be repurposed in attacks--through preconditions and capabilities over security-relevant objects. Instead of discovering vulnerabilities first and constructing attack paths afterward, ChainAgent uses an evolving exploit graph to guide source-code inspection. It searches backward from unmet preconditions for capability producers and forward from discovered capabilities for functional gadgets that consume or amplify them. Object-centered chaining knowledge from our empirical study directs searches toward promising vulnerability classes, functional operations, and object accesses. We evaluate ChainAgent against Codex, a general-purpose coding agent, on 15 PHP applications across three shared LLM backends. ChainAgent achieves 42.02%--44.63% recall for goal-reaching components and recovers up to 4.4 times as many correct goal-reaching dependency edges as Codex. An additional evaluation of 30 real-world PHP applications identifies 20 vulnerabilities and 13 exploit chains, nine of which achieve remote code execution (RCE).

0.26