CS Paper Radar

TIO-Former: Ultra-Lightweight 6-Directional ToF-Inertial Odometry for Nano-UAVs via a Streaming Causal Transformer

Yang Liu, Yifan He, Wenhao Zhao, Xiangyu Mo, Yang Xu, Hao Wei, Mingze Ma, Huan Li, Yifan Wu, Fei Gao, Zipeng Dai, Xin Zhou

cs.RO ·submitted 2026-09-15 13:54 UTC · v2
code/data

Abstract

Autonomous nano-UAV navigation requires accurate ego-motion estimation under stringent size, weight, power, and computing (SWaP-C) constraints, where visual sensors and LiDARs exceed payload limits, optical flow degrades in low-texture scenes, and inertial-only state estimation is susceptible to accumulated drift. While multi-zone time-of-flight (ToF) arrays provide a lightweight metric complement, 6-DoF estimation from merely 384 ranges per frame is challenged by invalid returns, anisotropic observability, and temporal computational scaling. We propose TIO-FORMER, a camera-free, optical-flow-free, and mapless range-inertial odometry framework driven by an IMU and an ultra-lightweight (15 g) payload of six orthogonal 8 x 8 ToF arrays. Our frontend pairs consecutive range grids with a bilateral gated difference, while IMU-guided cross-attention dynamically routes directional features conditioned on platform kinematics. A Streaming Causal Transformer couples an uncompressed Local KV cache with compressed Chunk-FIFO memory, maintaining bounded inference cost and memory footprint independent of flight duration. In real-flight evaluations, TIO-FORMER reduces open-loop position error by 54.4% compared to nano-UAV optical flow and by 66.4%-89.1% over learned inertial baselines. We also evaluate performance across multiple environments and robustness under severe sensing degradation. Deployed on an edge RISC-V companion computer, TIO-FORMER achieves a P95 latency of 10.466 ms and peak resident memory of 6.324 MiB (less than 5 percent system RAM), demonstrating that sparse range sensing provides practical geometric anchoring for resource-constrained micro-aerial robots. Code is available at https://github.com/Ly041021/TIO-Former.

Closest papers

Nearest neighbours by meaning across the whole index.

AnyVIO: Feed-Forward Streaming Visual-Inertial Odometry Across Platforms

eess.IV ·2026-11-19 ·Omoruyi Atekha, Marcus Greiff, Ray Zhang, Luca Carlone
similarity 0.74
Abstract · 11 pages

Geometric foundation models (GFMs) estimate camera mo- tion and scene structure from images without requiring ex- pert parameter tuning, but either lack metric scale or rely on learned priors to infer scale, which is unobservable from monocular images alone. Inertial sensing offers a way to observe metric scale, but existing methods add inertial in- formation through a filter or factor graph, which reintro- duces bespoke parameter tuning and optimization costs that can grow with the trajectory. To bridge this gap, we present AnyVIO, a real-time, feed-forward streaming model for monocular visual-inertial odometry (VIO), which combines a streaming GFM with an inertial foundation model (IFM). Both the GFM and IFM predict the metric motion between consecutive frames, and a lightweight learned fusion head quantifies the reliability of each estimate and blends them in a single forward pass. Across nine datasets recorded from cars, legged and ground robots, and handheld and head- mounted devices, AnyVIO reduces the metric position error of its visual model by 36% while publishing each pose esti- mate 70 ms after an image is received. We further deploy AnyVIO onboard two real vehicles at up to 140 km/h, where it remains accurate in poor lighting and heavy dust.

0.20

TinyCVIO: A Constellation-Aided Visual-Inertial Odometry System for Nanodrones

cs.RO ·2026-09-24 ·Derin Ozturk, Kaan Akan, Irwin Wang, Christopher Batten
similarity 0.69
Abstract · 9 pages, 6 figures, 4 tables. Video: https://youtu.be/6hQNdIcjHJE

Nanodrones require accurate, real-time state estimation under severe sensing and computational constraints. We present TinyCVIO, a visual-inertial odometry system that co-designs miniature sensing, visual processing, and estimation for a commodity dual-core microcontroller with 520 kB SRAM. Lightweight LED constellations provide known geometry without surveyed positions or yaw angles, assuming placement on a common level plane. A streaming visual frontend tracks LED observations from a millimeter-scale camera at 29.2 FPS, while a rigid-board measurement model retains inter-LED constraints and streaming QR bounds estimation workspace for a fixed filter-state size. Across 19 hand-held hardware-in-the-loop datasets, the rigid-board model reduces mean absolute trajectory error by 27% relative to planar points. The complete system runs onboard a Crazyflie across nine flights at three speeds, achieving 3.5-3.7 cm mean absolute trajectory error and 0.50-0.60% relative pose error over 10 m segments, with mean estimate latency of 15.7-16.3 ms.

0.23

Tight Learned Event-Inertial Odometry (TLEIO): a Transformer-Based Architecture for End-to-End Motion from Event Streams

cs.CV ·2026-10-23 ·Matteo Cascone, David Jensen, Alessandro Pirini, Angelo Stefanini, Pietro Venè +2 more
benchmark similarity 0.69
Abstract · 14 pages

Event cameras provide microsecond temporal resolution, high dynamic range, and sparse asynchronous measurements, making them compelling for odometry under fast motion and challenging illumination. Yet, accurate event-based state estimation remains difficult: existing systems often use events as a complement to frames or rely on feature tracking, correspondence search, and optimization-heavy backends, limiting the efficiency promised by event sensing. We introduce Tight Learned Event-Inertial Odometry (TLEIO), a compact filter-based pipeline that learns short-window relative motion directly from voxelized event streams and tightly fuses the resulting constraints with IMU propagation. Its learned front-end, EventsFormer, predicts local displacements and per-axis uncertainty from event voxels in a single forward pass, while a stochastic-cloning EKF fuses these overlapping predictions with IMU propagation, producing metric trajectories without explicit feature tracks and pose optimization at inference time. The network is trained directly from pose displacements, without requiring event-flow labels. We evaluate TLEIO on the TartanAir/TartanEvent benchmark and on real DAVIS240c sequences. On TartanAir, TLEIO reduces average ATE from 2.26 m to 1.10 m over the IMU-only TLIO baseline, while achieving up to 48.9% lower runtime than optimization-based event odometry methods.

0.11

StreamRig: Exploiting Intra-Rig Geometry for Streaming Multi-Camera Odometry

cs.CV cs.RO ·2026-09-30 ·Yufei Wei, Shuhao Ye, Qi Wang, Xin Zheng, Qing Huang +2 more
code/data similarity 0.67
Abstract · 8 pages, 4 figures, 5 tables. Code: https://github.com/WeiYuFei0217/StreamRig

Mobile robots and vehicles carry synchronized multi-camera rigs, yet many streaming 3D foundation models are designed for monocular input, leaving efficient use of rig geometry a challenge. We present StreamRig, a freeze-and-stream framework that builds causal streaming odometry for calibrated rigs on a frozen multi-view 3D foundation model. The frozen front-end jointly perceives the synchronized views using rig calibration. A Rig-Resampler compresses their features, a CausalBridge applies causal attention with a key-value cache, and a lightweight head regresses rig poses. A periodic re-anchoring protocol supports stable pose estimation over long sequences. Only these modules are trained, 74.6M parameters in total, with relative poses as the sole supervision. Our two-stage training strategy combines group relocalization pretraining with causal rig training to transfer the geometric priors of the frozen front-end and the alignment ability of the pretrained modules to streaming odometry. We evaluate on NCLT, TartanGround, KITTI-360, and our self-collected humanoid-robot dataset ZJH, where training uses only simulation and real-world evaluation is zero-shot. Across all four datasets, StreamRig achieves lower translation and rotation drift than the evaluated non-oracle monocular streaming and rig-aware offline models, while maintaining low inference cost. Ablations and controlled camera-count experiments identify the sources of these gains. We further examine how longer training windows affect inference over longer horizons. Code has been released at https://github.com/WeiYuFei0217/StreamRig.

0.34

FFVO: A Feedforward Pose Decoder for Long-Horizon Visual Odometry

cs.CV ·2026-09-12 ·Meng-Li Shih, Shih-Yang Su, Yuliang Zou, Hao Xiang, Haidong Zhu +5 more
benchmark similarity 0.65
Abstract · 10 pages, 9 figures

Stable and reliable 4D spatial understanding is fundamental for autonomous driving systems. While feedforward reconstruction networks can estimate camera motion and 3D structure in one pass, pose estimation over long videos remains challenged by computational cost, long-context ambiguity, and temporal instability. To address these challenges, we propose Feedforward Visual Odometry (FFVO), a pose-specialized adaptation of joint reconstruction architectures for efficient and temporally stable camera-pose estimation. FFVO uses (i) a compact camera-token representation for computationally efficient temporal aggregation, (ii) a hierarchical local-to-global temporal decoder that mitigates geometric ambiguity by separating short-range motion aggregation from sequence-level integration, and (iii) intermediate trajectory supervision that promotes temporal stability. Extensive evaluation on the Waymo Open Dataset (WOD), KITTI, and a large-scale proprietary benchmark demonstrates that our method performs favorably against existing feedforward approaches, and greatly reduces jitter and drift. These results support FFVO as an effective feedforward camera-pose decoder in long-horizon visual odometry settings.

0.21

Embedded Bare-Metal Radar-Inertial Odometry

cs.RO ·2026-10-05 ·Nicolai Adil Øyen Aatif, Morten Nissov, Kostas Alexis
code/data similarity 0.65
Abstract

Compact extraplanetary rovers and micro aerial vehicles require robust state estimation frameworks designed to operate under strict computational constraints in unforgiving environments. Typical solutions involving vision- or LiDAR-based sensing are computationally expensive and vulnerable to environments with perceptual degradation, making them poorly suited for resource-constrained platforms and austere conditions. Alternatively, Frequency Modulated Continuous Wave (FMCW) radar offers both robustness and computational efficiency by directly providing velocity measurements coupled with inherent resilience to perceptual degradation. These factors enable robust estimation, thereby reducing reliance on human operators for supervision to ensure platform safety in challenging environments. In this manuscript, we propose an embedded radar-inertial estimator tailored for low-compute platforms. All sensor drivers, data processing, and aided inertial navigation are performed on a single-core microcontroller, demonstrating its computational efficiency. Flight experiments show translational APE of $0.51-0.82\,\mathrm{m}$ and RPE of $<$3\,\% against motion capture, alongside closed-loop flight through an unmodified PX4 stack. The firmware and printed circuit board design are openly available on GitHub at https://github.com/ntnu-arl/embedded_rio and https://github.com/ntnu-arl/embedded_rio-pcb respectively.

0.32

NIF-VIO: Visual--Inertial Odometry Across Inertial and Non-Inertial Reference Frames

cs.RO ·2026-11-10 ·Zichao Shu, Lijun Li, Zhuochen Li, Zetao Chen, Jianyu Wang
similarity 0.65
Abstract

Conventional visual--inertial odometry (VIO) assumes that observations from cameras and an inertial measurement unit (IMU) are jointly consistent in an inertial reference frame. However, this assumption breaks down under non-inertial conditions. Inside accelerating or rotating carriers, visual observations of the interior reflect carrier-relative motion, while IMU measurements contain additional carrier-induced components, which can compromise conventional fusion. We therefore present NIF-VIO for localization relative to the local environment across inertial and non-inertial reference frames. It adapts visual--inertial fusion based on measurement consistency. As inertial conditions change, early constraint isolation is combined with local reoptimization to limit error propagation before inconsistency confirmation and repair the affected local geometry. Under non-inertial conditions, a compact model with temporally shared parameters is introduced to account for carrier motion while preserving inertial information that complements visual constraints. Experiments on public benchmarks and a self-collected dataset demonstrate that NIF-VIO achieves competitive performance under inertial conditions and improved localization accuracy and availability under non-inertial conditions.

0.24

FoundationVIO: Enforcing Metric Scale in Feed-forward Visual-Inertial Odometry

cs.RO ·2026-10-10 ·Jin Rhee, Yuhao Zhang, Frank Dellaert, Maurice Fallon
code/data similarity 0.64
Abstract

Feed-forward geometric foundation models (GFMs) directly predict dense geometry and camera poses from batches of images. Emerging visual SLAM methods chain together consecutive GFM batches to form dense point cloud maps. A core challenge is how to address the ambiguous geometric scale of GFM predictions: independent predictions are locally consistent up-to-scale but not constrained by any direct physical measurements. Models trained on data with known scale improve the consistency of GFM reconstructions but again do not directly measure it. Consequently, trajectories and 3D reconstructions from GFM-enabled SLAM methods inherit this issue. Motivated by parallels with classical visual-inertial odometry, we introduce FoundationVIO which integrates inertial sensing with GFM predictions to recover metric scale reconstruction using a factor-graph based approach. We demonstrate odometry estimates competitive with classical state-of-the-art VIO methods and accurate dense reconstructions that outperform GFM-enabled SLAM methods. We also add a minimal GFM-based loop-closure mechanism to create a full Visual-Inertial SLAM system capable of creating globally accurate reconstructions and pose estimates. We evaluate our method on three datasets with well known sensor systems and demonstrate its compatibility on ubiquitous camera and IMU sensors. The method runs at approximately real-time on a consumer-grade laptop GPU. Code: https://github.com/ori-drs/FoundationVIO.

0.28