CS Paper Radar

SEMA-GUARD: Semantic and Graph-Based Vulnerability Detection in Assembly Code

Halil Dursunoglu, Kaan Sulkalar

cs.CR ·submitted 2026-09-15 14:35 UTC · v1

Abstract

In cases where source code is not available, such as malware analysis, firmware analysis, and embedded systems analysis, vulnerability detection in compiled programs has gained importance. Current methods are heavily reliant on syntactical regularities or higher level representations that are vulnerable to changes in the compiler and may not be readily applicable to assembly code.In this article, we present SEMA-GUARD, a framework that uses semantic analysis and graph neural networks to identify flaws in assembly code. The approach improves the representation of control flow graphs by adding information about the program's execution at a lower level of abstraction, including stack manipulations, memory accesses, and data flow. A set based on the Juliet Test Suite was used to evaluate the effectiveness of SEMA-GUARD. In this set, each piece of source code is initially translated into assembly language and then broken down into function-level chunks. The suggested method, which relies only on statistical or structural data, achieves an accuracy of 85.1\% and an F1 score of 0.801, according to the results. Such results imply that including semantic information in graph-based models may be a successful method for identifying vulnerabilities in compiled code.

Closest papers

Nearest neighbours by meaning across the whole index.

SemVul: Semantic-Enhanced Graph Neural Networks for Code Property Graph-based Vulnerability Detection

cs.SE cs.CR ·2026-09-05 ·Younas Affan, Leonardo Regano, Giorgio Giacinto
publishedbenchmark similarity 0.69
Abstract

Vulnerabilities in source code are often the root cause of cyberattacks worldwide, as attackers exploit weaknesses in software to gain unauthorized access, steal data, or disrupt services. In this study, we evaluated existing research approaches and propose SemVul, a vulnerability detection pipeline that demonstrates better generalization and higher accuracy in learning vulnerable code patterns. We propose a Code Property Graph-based vulnerability-detection approach combined with semantic-level enhancement, enabling the model to capture both the program's structural flow and the semantic meaning of the code. Our approach integrates both node-level and edge-level semantic embeddings using pre-trained code embedding techniques. We systematically evaluate multiple GNN architectures on publicly available benchmark datasets. SemVul is generic with respect to the programming language and supports multiple architectures. By integrating structural and semantic information, the proposed approach improves vulnerability detection performance. Our results show that SemVul outperforms existing approaches and provides better generalization.

0.33

SymLift: Neural Semantic Lifting for Compile-Free Vulnerability Detection in Context-Incomplete Code Fragments

cs.SE cs.CR ·2026-10-25 ·Xiarun Chen, Jiaxing Xu, Bozhi Wu, Chenhui Cui, Chunrong Fang +4 more
similarity 0.68
Abstract

Missing project context can prevent build-dependent analyzers from constructing program relations required for vulnerability detection, while neural predictions alone do not establish auditable derivations. We present SymLift, a compile-free framework centered on Vulnerability-Oriented Neural Semantic Lifting for context-incomplete code fragments. A fine-tuned large language model reconstructs vulnerability-relevant control-flow, data-flow, memory, and resource relations in a constrained LLVM-like intermediate representation (IR), without reconstructing the full project context or directly predicting vulnerability labels. A deterministic parser validates the IR and maps its supported operations and relations into normalized evidence facts. Explicit Datalog rules derive findings with supporting facts and derivation traces, ensuring deterministic reasoning for fixed facts and rules. We evaluate SymLift on FormAI, Juliet, and MegaVul. Reducing complete Juliet programs to function-level fragments lowers Clang compilation success from 100% to 12.00%, whereas SymLift's analysis completion rate decreases by only 1.17 percentage points. After task-specific fine-tuning, the lifter achieves a control-flow intersection over union (IoU) of 96.85% on FormAI. SymLift-Qwen-7B achieves a Target-F1 of 94.41% on FormAI and, across six vulnerability families on MegaVul, a micro-averaged precision of 98.24% and a micro-averaged Target-F1 of 91.66%. These results support accurate and auditable detection in the evaluated context-incomplete settings, even with partial program relations.

0.23

Pattern-Guided Graph Synthesis for Suppressing Known Defects in DL Compiler Fuzzing

cs.PL cs.SE ·2026-10-03 ·Qiong Feng, Xiaotian Ma, Di Cui, Wei Song, Peng Liang
similarity 0.67
Abstract

Fuzzing is effective at finding bugs in deep learning (DL) compilers, but existing fuzzers repeatedly trigger faults they have already uncovered. Current fuzzers diversify the generated programs, and downstream tools deduplicate bug reports post hoc, but neither stops a fuzzer from generating programs that re-trigger known defects. We present Reprise, a DL compiler fuzzer that suppresses reports of known defects during test generation. Reprise uses a deliberately lightweight generator that builds graphs in a unified intermediate representation (UIR) with local operator signatures. Instead of diversifying programs, Reprise distills each discovered defect into a semantic graph pattern that captures the operators, value constraints, graph context, and data flow required to trigger it. During graph synthesis, it regenerates any node that completes a known pattern, so known defect triggers are avoided before compilation and execution. We evaluate Reprise on three DL compilers: TVM, PyTorch Inductor, and ONNX Runtime. Against its unguided variant, patterns written for the dominant known defects reduce crash reports by 90.2% on TVM (254 to 25) and by 93.8% on PyTorch Inductor (594 to 37), with comparable branch coverage and 1.0-17.9% fewer executed tests. These results come from one run per configuration and concern the defects the patterns were distilled from. Reprise also found 25 previously unknown bugs across the three compilers, 24 of them within one month, of which 7 have been fixed and 12 more confirmed by developers. The replication package has been provided at [11].

0.08

VulDec: Vulnerability Detection in Binaries via Neural Decompilation

cs.CR cs.LGcs.SE ·2026-10-24 ·Francesco Crescenzo Grasso, Pietro Liguori, Roberto Natella, Domenico Cotroneo
code/data similarity 0.67
Abstract · Submitted to Automated Software Engineering

Automated vulnerability detection in binary executables is challenging due to the lack of source code and the limited semantic information available at the assembly level. Despite significant progress in machine-learning-based code analysis, the field still lacks methodologies and large, high-quality datasets that provide vulnerable code jointly at assembly- and source-level with precise vulnerability labels. To address this gap, we introduce VulDec, consisting of (i) a new large-scale, carefully curated dataset aligning real-world Assembly-C function pairs with detailed CWE annotations across multiple architectures, and (ii) the first end-to-end framework that leverages neural decompilation for binary vulnerability detection. Tuned LLM-based neural decompilers trained on our dataset achieve strong source-level recovery across architectures (Edit Similarity of approximately 56%, BLEU-4 of approximately 43%), while our tuned LLM-based detectors reach a macro F1-score of 0.61 on an in-distribution realistic test set (3% vulnerability rate). Our findings provide evidence that neural decompilation offers a powerful alternative to conventional low-level binary representations, facilitating robust binary vulnerability detection.

0.35

GRAML: Graph-Grounded Reasoning and Multi-Task Learning for LLM-Based Software Vulnerability Detection

cs.SE ·2026-10-07 ·Ruohan Li, Miaoqing Tian, Haipeng Qu, Ruobing Jiang
similarity 0.66
Abstract

Large Language Models (LLMs) have been widely applied to software vulnerability detection. However, their performance is often limited by insufficient use of control-flow and data-flow information. In this paper, we propose GRAML, a framework that combines graph evidence, vulnerability description generation, and multi-task training. GRAML first performs static analysis on C/C++ programs to extract critical source lines and typed line relations as structural evidence. It then uses this evidence to guide GPT-5 through the Tree-of-Thought-guided Vulnerability Reasoning (ToT-VR) process and generate vulnerability descriptions. These descriptions are further combined with Detection, Localization, and Assessment samples to build a unified four-task training dataset. We evaluate GRAML on an in-distribution (ID) test set and six out-of-distribution (OOD) datasets. The results show that GRAML achieves average F1 scores ranging from 66.67% to 68.70%, outperforming state-of-the-art baselines by up to 30.92%. Ablation experiments further show that ToT-VR and graph-guided vulnerability descriptions improve detection performance compared with standard Chain-of-Thought (CoT) reasoning and raw Code Property Graph (CPG) serializations. These findings provide practical guidance for building more reliable and secure software engineering systems with large language models.

0.16

From Instructions to Exploits: Applying Program Analysis to Malicious Agent Skills Across Natural Language and Code

cs.CR ·2026-10-24 ·Shiwu Zhao, Baizhu Wang, Guoqiang Zheng, Tingyu Gao, Yuheng Xie +4 more
benchmark similarity 0.65
Abstract

LLM-powered agents increasingly rely on third-party skills that combine natural-language instructions with executable code, creating supply-chain risks that may span both artifacts. Existing skill scanners often rely on rule matching or direct LLM judgments and provide limited support for tracing such cross-domain behavior. We present the Supply-Chain Scanner for Agent Skills (SCS), a static analysis framework that unifies instructions and code for security analysis. SCS compiles natural-language instructions into a constrained Python-style intermediate representation using a limited set of security-oriented APIs. It then constructs program dependence graphs for instructions and bundled code and connects them into a cross-domain graph (xPDG). A Trust-Sensitivity-Capability (TSC) model propagates security properties over the graph to support structured, largely deterministic risk detection. On a manually verified benchmark of 117 malicious and 117 benign skills, SCS achieves the highest average accuracy (85.6%), recall (95.2%), and F1-score (86.9%) among evaluated methods across five LLMs, with 80.2% precision and average token consumption of 13.7 million. Its NL-to-IR compiler achieves 92.5%-94.5% step-level correctness on 400 human-annotated instruction steps. Finally, analyzing 66,157 real-world ClawHub skills yields 2,473 candidates, of which 627 are confirmed malicious through auxiliary dynamic validation and manual review.

0.18

Enhancing LLM-Based Vulnerability Detection via Representation-Aware Logical Ensemble

cs.CR ·2026-10-24 ·Francesco Crescenzo Grasso, Pietro Liguori, Roberto Natella, Domenico Cotroneo
published similarity 0.64
Abstract · Accepted for publication at QRS 2026

Automated vulnerability detection in C source code is a long-standing challenge, as traditional static analysis tools often trade precision for scalability and struggle with complex vulnerability patterns. Recently, large language models (LLMs) have shown promising results; yet, most approaches rely on a single code representation, implicitly assuming uniform suitability across vulnerability types. In this work, we systematically study LLM-based vulnerability detection under multiple code representations, including raw source code, Abstract Syntax Trees (AST), and Control Flow Graphs (CFG). Through extensive empirical analysis, we show that different representations exhibit complementary strengths, with specific views being more effective for particular classes of vulnerabilities. Building on these findings, we propose a Representation-Aware Logical Ensemble (RALE) that integrates LLMs trained on different code representations through explicit logical rules and majority voting. While single-representation models achieve up to 73% F1-score, our integrated approach reaches 78% F1-score, with commensurate gains in accuracy, precision, and recall, consistently outperforming individual models. These results highlight the importance of explicitly leveraging complementary code representations when combining LLMs for effective vulnerability detection.

0.29

Structured Security Explanations for Learning-Based Vulnerability Detection

cs.CR cs.SE ·2026-10-27 ·Fares Trad, Yizhou Chen, Hung Viet Pham, Zeyu Sun, Gias Uddin
similarity 0.63
Abstract · 21 pages, 3 figures, 9 tables

Software vulnerability detection remains difficult because existing approaches rely on predefined analysis rules, learn vulnerability patterns implicitly from code and labels, or use large language models (LLMs) to make the final security judgment. It remains unclear whether structured descriptions of security-relevant program behavior can improve supervised detection. We present VulnLens, an explanation-augmented framework for binary C/C++ vulnerability detection that separates program-behavior analysis from the final decision. A label-blind LLM-based Explainer examines each function from seven fixed perspectives: data flow, memory access, object lifetime, arithmetic and type behavior, control flow, shared state, and external-resource access. Without receiving vulnerability labels or CWE information, it generates structured explanations. A supervised Detector combines source code and explanations through sequential cross-attention. We evaluate VulnLens on a PrimeVul-derived dataset covering ten CWE categories and test transfer to SecVulEval without retraining. On the 526-function PrimeVul test set, VulnLens achieves 75.5% accuracy and 77.2% F1, exceeding DeepSeek V4 Pro by 4.2 percentage points in accuracy and Gemini 2.5 Pro by 2.2 points in F1. Matched explanations improve F1 by 7.3 points over a separately trained code-only detector. On SecVulEval, VulnLens achieves 66.4% accuracy and 65.8% F1, outperforming DeepSeek V4 Pro by 7.6 points in accuracy and 20.0 points in F1, and Gemini 2.5 Pro by 16.6 points in accuracy and 7.8 points in F1.

0.16