CS Paper Radar

Characterizing Replay Retention Under Dynamics Shift in Model-Based Reinforcement Learning

Everest Yang, Skye Thompson, George D. Konidaris

cs.RO cs.LG ·submitted 2026-09-16 05:47 UTC · v1
benchmark

Abstract

Adapting to changes in robot dynamics requires learning from new data without discarding experience that may still be useful. In continual model-based reinforcement learning (RL), replay collected before a dynamics change can slow adaptation, while removing it unnecessarily reduces available training data and can be especially costly if earlier dynamics return. We study when recent transitions are preferable to the full replay history. Two quantities characterize this trade-off: change magnitude and age-staleness area under the curve (AUC), measuring how well transition age separates stale from fresh data. Forgetting stale data helps after large permanent shifts but hurts when dynamics recur and older data becomes useful again. Choosing a replay strategy therefore depends on predicting when older data will help or hurt. We test these effects across two locomotion morphologies, two model-based RL algorithms, and Real-World RL benchmark perturbations. Because ground-truth staleness labels are unavailable on deployed robots, we evaluate whether an estimator built from interaction data can still provide the quantities needed to choose a replay strategy after permanent changes. Our results show that replay retention depends on change magnitude and on how the dynamics evolve.

Closest papers

Nearest neighbours by meaning across the whole index.

RIFAR: Reliability-Informed and Forgetting-Aware Replay for Continual Robot Learning with World-Action Models

cs.AI ·2026-10-02 ·Tu Lin, Zheng Lu, Zirui Song, Zixian Lin, Zebang Feng +5 more
similarity 0.76
Abstract · 16 pages, 8 figures, 11 tables, including appendices

Genuine embodied agency requires robots to turn continuous real-world experience into lasting, transferable skills. This demands continual learning that integrates new capabilities while preserving prior knowledge in evolving environments. Experience replay mitigates catastrophic forgetting, but storing complete demonstrations becomes costly as tasks accumulate. World-action models provide an alternative through generative replay. However, visually coherent rollouts may contain actions that cannot realize the predicted transitions, while new-task adaptation can disrupt learned behavior. To address these problems, we propose RIFAR (Reliability-Informed and Forgetting-Aware Replay), a reliability-informed and drift-aware generative replay framework. It reconstructs trajectories from compact historical demonstration prefixes and uses a trainable inverse-dynamics model to assess action-visual consistency. It first adapts to new tasks using current-task demonstrations and high-reliability replay, then evaluates how this adaptation changes action predictions on historical inputs and prioritizes reliable trajectories with greater action drift for further training. Across three LIBERO suites and real-world experiments, RIFAR outperforms the previous state of the art in WAM-based generative replay. On LIBERO-Goal, it achieves an AUC of 90.97 while retaining only 320 historical time steps per task, about 4.9% of those retained by 50-demonstration replay.

0.21

Data-Free Continual Learning for World Action Model with Rectified Generative Replay

cs.RO cs.CV ·2026-10-13 ·Kaipeng Fang, Hangxu Liu, Chaojian Shi, Yunsong Zhou, Hongzi Zhu +3 more
code/data similarity 0.73
Abstract

World action models (WAMs) built on pretrained video generation models adapt quickly to new robotic tasks, but they forget previously learned tasks under sequential fine-tuning. Experience replay (ER) mitigates such forgetting by rehearsing data of previous tasks, yet this data is often unavailable in robotics, where a policy is deployed as weights only and its training data is not shared along with it. In this work, we ask whether a WAM can achieve data-free continual learning by regenerating its own past. Our key observation is that a WAM can indeed autoregressively regenerate complete rollouts of previously learned tasks and replay them to mitigate forgetting. However, replaying such raw rollouts still lags far behind replaying real data, which we attribute to two issues. First, the WAM is unable to recognize task completion and keeps generating purposeless motion after the task is done. Second, under open-loop generation, the generated actions gradually drift away from the generated observations. To address both issues, we present rectified generative replay (R$^2$-WAM), which truncates generated rollouts at task completion with an agentic evaluator and filters out rollouts whose actions are physically inconsistent with the observations. On the four LIBERO suites and five real-world tasks, R$^2$-WAM reduces forgetting by over 90% relative to sequential fine-tuning and nearly matches ER without accessing any data from previous tasks. Our analysis further reveals that forgetting in WAMs concentrates in inverse dynamics modeling: a forgotten WAM still produces visually plausible observations of previous tasks while its generated actions fail. Project page: https://kaipengfang.github.io/r2-wam/

0.23

DRAP: Dynamics-Risk Adaptive Plasticity for Continual Learning in Physical AI

cs.LG cs.RO ·2026-11-03 ·Oswaldo Ludwig
similarity 0.71
Abstract

Continual learning in physical AI differs from conventional continual learning because small per-step policy errors can accumulate over a trajectory. Each deviation may move the agent outside the training distribution, increase subsequent prediction errors, and ultimately cause closed-loop task failure. This work introduces Dynamics-Risk Adaptive Plasticity (DRAP), a replay-free method that estimates the historical importance of adaptable model tensors from sample-level action gradients weighted by local trajectory-amplification risk. A ridge-regularized local linear model is fitted to expert state-action transitions, and the largest singular value of its state-transition matrix provides a policy-independent, Lyapunov-inspired estimate of one-step perturbation amplification. After each task, risk-weighted squared gradients are accumulated in a tensor-level importance memory. During subsequent tasks, DRAP uses normalized cumulative importance to scale the effective AdamW learning rate of each tensor, immediately reducing the plasticity of components that supported previous behavior at dynamically sensitive trajectory points. We instantiate DRAP on a fixed KappaTune-selected subnetwork of OpenVLA and evaluate replay-free sequential adaptation across the LIBERO Spatial, Object, and Goal suites. Compared with standard AdamW fine-tuning and EWC, the results show substantially improved retention of previously learned behaviors while preserving strong new-suite acquisition.

0.11

Memory Anchors for Continual Robot Learning

cs.RO ·2026-08-27 ·Maximilian Du, Zhanyi Sun, Chen Xu, Paarth Shah, Masha Itkina +1 more
benchmark similarity 0.71
Abstract · 22 pages, 15 figures

Robot policies deployed in the wild should have the capability to continually learn new tasks without forgetting existing behaviors. A common approach to combat such catastrophic forgetting is to train on new task data with a replay buffer of previously learned task data. Although this buffer is commonly sampled randomly from all prior experiences, we show that a small set of these experiences contributes greatly in anchoring past performance. We call these experiences Memory Anchors. We identify Memory Anchors in regions where representations of new-task observations collapse onto those of old-task observations even though the tasks require conflicting actions, like when a familiar object must be manipulated in a new way. Rehearsing old data in this region plays a key role in preventing destructive overwriting of past task knowledge, serving as this critical Memory Anchor role. Excluding only 10% Memory Anchors before sampling the buffer leads to more than a 4.5x increase in catastrophic forgetting on the LIBERO benchmark suites. Conversely, enriching the replay buffer with Memory Anchors can decrease high-conflict task forgetting by 63% and enables successful continual learning of two task sequences on a real robot. Videos and additional visualizations can be found at https://robot-adaptation.github.io/MemoryAnchors

0.53

An Analysis of Streaming Deep Reinforcement Learning for Adaptive Continual Learning in Robotics

cs.RO ·2026-09-23 ·Teeratham Vitchutripop, Alyssa Quarles, Wenhe Zhang, Richard Xue, Daniel Rakita
similarity 0.70
Abstract

Over the course of a lifetime, robots may encounter novel scenarios unaccounted for in its original training that result in performance degradation. One common approach to mitigating this issue is to further grow the offline training dataset in hopes of producing a policy robust to these changes. In contrast, biological learning occurs moment-to-moment via a stream of experience, unlike the predominantly batch-based and offline nature of deep learning. Although recent works show the feasibility of stream-based deep reinforcement learning, where updates use only the latest experience, none have shown it to be a viable continual learning framework for adapting robotic policies to unseen changes. In this paper, we present the first analysis of streaming deep reinforcement learning for adaptive continual learning in robotics. In particular, we show that, following an initial pretraining phase, streaming deep RL can enable a robot to successfully adapt to unforeseen changes to itself, its environment, or goals. Our primary experiments within quadruped locomotion demonstrate that a deep neural network robotic policy with certain optimizers and plasticity loss mitigation techniques can successfully leverage domain task knowledge from its pretraining to quickly adapt online to diverse changes via stream learning, outperforming batch-based on-policy methods and improving task success rates by up to 90% over the pretrained policy. Furthermore, we perform additional evaluations on robotic manipulation tasks to determine if our previous observations extend to different robotic morphologies and scenarios. Our results show that the successes observed in quadruped locomotion can be partially realized in manipulation with stability and performance limitations. We conclude with a discussion on the limitations of our work and its implications for the future of continual robot learning.

0.37

The Stability Gap in Continual Reinforcement Learning

cs.LG cs.AI ·2026-11-19 ·Sebastian Pusch, Matthia Sabatelli, Gido M. van de Ven
benchmark similarity 0.70
Abstract

Continual reinforcement learning (CRL) aims to enable agents to adapt to changing tasks while preserving previously acquired capabilities. Evaluation often relies on final aggregate metrics that can hide temporary performance degradation during adaptation. This work introduces a simple CRL benchmark that varies observation representations while preserving environment dynamics and rewards, supporting proof-of-concept demonstrations, inexpensive experimentation, and easily reproducible sanity checks. Using this benchmark, we demonstrate the stability gap in CRL: a substantial drop in prior-task performance after the introduction of new tasks, followed by partial or complete recovery. This pattern occurs despite the agent having complete access to past tasks.

0.14

ACCRUE: Continual Off-Policy Reinforcement Learning for Robot Foundation Models

cs.RO cs.AIcs.LG ·2026-10-13 ·Changyeon Kim, Kimin Lee, Yashraj Narang, Yijie Guo
similarity 0.69
Abstract · Project website: https://accrue-rl.github.io

Reinforcement learning (RL) post-training improves robot foundation models (RFMs) beyond their demonstrations, but real-world deployment demands more: learning new tasks efficiently while retaining previously acquired behaviors. Existing continual RL methods on top of VLAs mitigate forgetting but rely on on-policy updates with limited forward transfer, whereas off-policy methods improve single-task sample efficiency without addressing learner persistence across tasks. We propose ACCRUE, a continual off-policy RL framework that carries lightweight actor and critic networks across tasks, allowing each stage to reuse behavioral and value knowledge acquired through prior RL. The inherited critic adapts only on current-task transitions and guides current-task actor learning, while prior behavior is preserved by distilling the actor toward cached targets on a small number of retained episodes. Fixed visual features keep the inherited learner and its replay compatible with base-policy updates. Across contact-rich assembly sequences in simulation and on real-robot hardware, ACCRUE accelerates subsequent-task learning with near-zero forgetting and significantly reduces real-robot training time by 31.0\% to 68.5\%.

0.34

Policy Improvement-Guided Replay for Continual Reinforcement Learning

cs.LG cs.AIcs.CL ·2026-11-19 ·Qin-Wen Luo, Haoxuan Gao, Sheng Ren, Xiang Chen, Sheng-Jun Huang
similarity 0.68
Abstract

Continual reinforcement learning (CRL) requires models to acquire new capabilities while retaining performance on previous tasks. A stability-oriented perspective common in conventional continual learning emphasizes knowledge preservation and interference mitigation. Complementing this perspective, we revisit CRL for vision-language models through policy improvement, a fundamental principle of RL, to preserve acquired performance gains. Using the performance difference lemma, we characterize historical performance changes through the current policy's expected advantages on historical task distributions, motivating replay of historical prompts with the current policy. To allocate limited replay memory, we propose Contrastive Likelihood Replay (CoLiR), which contrasts likelihood gains on correct responses from the final task policy with likelihood reductions on incorrect responses from the initial policy. Our analysis links correct-response likelihood gains to reference-policy advantages under an idealized KL-regularized optimal update and provides an endogenous-reward interpretation for general policy updates. CoLiR estimates scores from finite training rollouts and cached log-likelihoods, selects prompts at task boundaries, and replays them uniformly during subsequent training, with KL regularization restricted to replayed prompts. Memory construction only requires a small amount of additional cross-policy scoring but no additional response generation. Across three Qwen3-VL model sizes on MRCL, CoLiR achieves the highest mean final accuracy and mean task accuracy among the compared methods while maintaining competitive new-task performance.

0.20