CS Paper Radar

DynoFluxBench: Benchmarking Kinodynamic Space-Time Planners in Dynamic Environments

Franz Queißner, Andreas Orthey, Wolfgang Hönig

cs.RO ·submitted 2026-09-16 12:13 UTC · v1
benchmark

Abstract

Robots that leave structured, static environments must plan motions that are kinodynamically feasible and safe among moving obstacles. However, there are no dedicated benchmark frameworks that combine both aspects. To overcome this, we present DynoFluxBench, a framework to compare kinodynamic planners in known, dynamic environments with unbounded arrival time. To demonstrate its utility and establish strong baselines, we develop three dedicated planners, named ST-Db-RRT, ST-GBRRT, and KIST, that fuse kinodynamic and space-time methods, covering different kinodynamic search paradigms: ST-Db-RRT expands with randomly selected discontinuity-bounded motion primitives using trajectory optimization, whereas KIST and ST-GBRRT maintain a kinodynamically feasible tree with different heuristic guidance. We analyze the probabilistic completeness guarantees of those new planners in dynamic environments. Finally, we evaluate ST-Db-RRT, ST-GBRRT, and KIST using DynoFluxBench, showing that ST-Db-RRT reaches a first solution up to 32 times faster, while KIST and ST-GBRRT remain valuable where trajectory optimization is fragile. Videos and further analysis can be found at https://dynofluxbench.github.io/dynofluxbench/.

Comment
8 pages

Closest papers

Nearest neighbours by meaning across the whole index.

ST-pRRTC: Parallel Space-Time RRT-C with Adaptive Goal-Time Forests

cs.RO ·2026-09-24 ·Duo Zhang, Jintong Li, Junshan Huang, Jingjin Yu
similarity 0.70
Abstract

We propose ST-pRRTC, a GPU-parallel space- time RRT-Connect motion planner for problems with known obstacle trajectories and unspecified arrival time. Searching over many arrival times broadens temporal coverage but divides a finite planning budget among more backward trees. To address the challenge, ST-pRRTC builds a shared forward tree and an adaptive forest of backward goal-time trees. Its interval root formulation samples goal arrival times continuously and guarantees probabilistic completeness and asymptotic arrival- time optimality under the stated assumptions in a bounded time domain. The practical root recycling policy has no such guar- antees. It adapts a fixed number of backward trees, replacing later roots while retaining useful search progress. Experiments on three dynamic benchmarks show that both variants achieve lower mean first-solution times and earlier mean final arrivals than ST-RRT* and SI-RRT on problems solved by all compared methods. Further experiments demonstrate the benefit of recy- cling over broad arrival-time ranges. Real-robot demonstrations show root-recycling ST-pRRTC planning motions for a UR5e among moving Crazyflie quadrotors.

0.16

MeshSIPP: Efficient Lattice Planning in Dynamic Environment

cs.AI cs.RO ·2026-10-07 ·Marat Agranovskiy, Konstantin Yakovlev
benchmarktheory similarity 0.69
Abstract

Autonomous navigation in dynamic environments requires computing spatiotemporal trajectories that satisfy non-holonomic motion constraints. When the trajectories of the moving obstacles are predictable or known, a promising approach is to rely on the combination of state lattices constructed from precomputed feasible motion primitives and Safe Interval Path Planning -- a search-based algorithm with strong theoretical guarantees. While this approach yields feasible paths, the rich primitive sets needed for smooth navigation induce a large branching factor, which becomes costly when coupled with time-dependent obstacle intervals. To this end, we present MeshSIPP, an efficient planner that removes the computational bottleneck by exploiting the fact that many primitives sweep the same regions and can therefore be validated together. MeshSIPP propagates primitives as spatial bundles, screens them with lightweight bounding-interval checks, and defers the expensive exact departure-time search until a primitive reaches its terminal state. A time-aware pruning rule additionally discards redundant space-time branches early in the search. We prove that the resulting search is complete and optimal. Extensive experiments over more than 6,000 benchmark instances and real-time ROS~2 simulations show that MeshSIPP achieves up to a 3$\times$ speedup over state-of-the-art spatiotemporal planners.

0.18

Reward-Guided RRT* for Budgeted Task and Motion Planning

cs.RO cs.AI ·2026-10-26 ·Vinícius Araújo de Oliveira, Gabriel Ferreira Mendes Lourenço, Paulo L. J. Drews-Jr, Armando Alves Neto, Douglas G. Macharet
similarity 0.68
Abstract

Robotic missions involving spatially distributed tasks often require jointly selecting rewarding locations and planning feasible motions under limited travel budgets. This paper proposes Reward-Guided RRT*, a new sampling-based framework that constructs a budget-feasible mission through a sequence of locally joint task-selection-and-motion-planning stages, evaluated directly in the continuous state space, without requiring a precomputed task-transition graph. The method incrementally builds a mission using reward-guided RRT* searches, while a return-feasibility procedure ensures that each selected task can be visited without violating the mission budget. Experiments with increasing obstacle complexity and number of tasks show solutions comparable to VNS-PRM* while requiring substantially fewer sampled states. We also extend the framework to Dubins steering and evaluate it in CoppeliaSim with a scaled car-like robotic platform, demonstrating its ability to incorporate vehicle kinematic constraints.

0.15

geodex: A Library for Motion Planning on Riemannian Manifolds

cs.RO ·2026-10-06 ·Phone Thiha Kyaw, Ben Wei, Sepehr Samavi, Miguel Angel Rogel Garcia, Jonathan Kelly
benchmarkcode/data similarity 0.68
Abstract · 8 pages, 7 figures, 4 tables. Code, documentation, and tutorials at https://geodex.readthedocs.io

Planning motions that respect the intrinsic geometry of a robot's configuration space, including its curvature and a configuration-dependent notion of cost, yields shorter, lower-energy, and more natural trajectories than planning under the ambient flat metric. Existing libraries for optimization on manifolds provide rich geometric primitives but do not plan around obstacles. While general-purpose motion planning libraries support many state spaces and custom distance functions, they do not yet treat a configuration-dependent Riemannian metric as the geometry that drives distance, interpolation, and geodesics. We present geodex, an open-source C++20 library with Python bindings. The library exposes the manifold, its Riemannian metric, the retraction, and the sampler as independent, interchangeable components through a single sampling-based motion planning interface. The same planner runs unchanged on canonical spaces $\mathbb{R}^n$, $\mathbb{T}^n$, $\mathbb{S}^n$, matrix Lie groups such as $SO(2)$, $SE(2)$, $SO(3)$, and $SE(3)$, products of these spaces, and articulated-robot configuration spaces, each equipped with a user-defined Riemannian metric. We make geodex publicly available with documentation, tests, and a reproducible benchmark suite.

0.37

Rapidly-Iterating Grid-Based Near-Optimal Kinodynamic Motion Planning

cs.RO ·2026-09-19 ·Michael Moncton, Eric Frew
similarity 0.68
Abstract · Submitted to IEEE Transactions on Robotics

This paper develops the Rapidly-iterating kinoDynamic Grid (RDG) algorithm, an asymptotically near-optimal kinodynamic motion planning algorithm that produces high quality solutions through rapid iteration. The algorithm leverages a state space grid decomposition to perform node selection, dynamics propagation, and graph revision in constant time complexity with respect to the number of nodes in the trajectory tree. Through a covering ball sequence induction proof, the algorithm is shown to be asymptotically near-optimal and probabilistically complete. Different subsystems of the algorithm are evaluated against common nearest-neighbor search-based methods at generating exploration bias. The RDG algorithm is evaluated through simulated trials in complex, kinodynamic motion planning problem environments up to 10 DOF relative to similar sparse, kinodynamic planning algorithms with optimality guarantees, SST and DIRT. The RDG algorithm outperforms both SST and DIRT in mean final solution quality by up to 104% and 40% respectively. Additionally, RDG maintained a 100% success rate, even on a 10-DOF test case where both SST and DIRT did not.

0.17

Motion planning in high dimensional spaces hybridizing RRT and HAR via position-direction decoupling

cs.RO ·2026-09-15 ·Frederic Cazals, Nelson Feyeux
similarity 0.68
Abstract · 22 pages, 8 figures

The exploration of high-dimensional spaces remains a challenging problem, in particular in the presence of narrow passages and small clearances. We propose novel sampling-based path-planning methods for high-dimensional spaces combining Rapidly-exploring Random Trees (RRT) and Hit-and-Run (HAR) random walks by decoupling the point being extended from the direction of extension. We also show that RRT and HAR appear as special cases of a generic algorithm coupling the biases used for the point and direction extension, respectively. We further study a sparse-move strategy in which only a fraction p_r of the robots is moved at each step, helping both RRT and the proposed HAR algorithms handle cluttered instances. Tests are presented for two families of models: classical piano mover problems in 3D, and complex molecular systems involving tens of rigid domains moving relatively to one another -- the latter viewed as independent robots exploring the motion space SE(3)N . Within seconds on a standard laptop, our algorithms solve instances with up to 64 robots and 384 degrees of freedom. We conclude by suggesting one of our methods, HARF, as the method of choice for complex multi-robot planning problems, being up to two orders of magnitude faster than the classical RRT moving all robots at each step--when it succeeds at all, and still up to 2.4 fold faster on most instances when both use their best p_r.

0.33

MR. POP: Multi-Robot Parallel Optimizing Planner for Almost-Surely Asymptotically Optimal Planning

cs.RO ·2026-09-25 ·Chih H. Huang, Roy Xing, Brian Plancher, Zachary Kingston
similarity 0.68
Abstract

Finding globally optimal paths remains a fundamental challenge in multi-robot motion planning. Despite acceleration of almost-surely asymptotically optimal (a.s.a.o.) planners via CPU-based parallelism, achieving both probabilistic convergence guarantees and strong computational performance, these algorithms still struggle to scale to multi-robot settings. As such, we introduce MR. POP, a GPU-based a.s.a.o. multi-robot planner based on dRRT and the AO-x meta-algorithm. MR. POP uses large-scale GPU-based SIMT-parallelism to simultaneously run hundreds of roadmap construction and tree search iterations with underlying parallel nearest neighbor search and collision checking operations. We show that this enables MR. POP to become the only planner achieving a 100% solve rate while being faster than state-of-the-art a.s.a.o. planners in multi-robot systems up to 35-DOF. MR. POP also raises the success rate of downstream motion optimizers (e.g., from 4% to 72%), by creating high-quality, diverse seeds that help avoid local minima.

0.20

PoliMop: Policy-in-the-Loop Motion Planning in 3D Spaces for Mobile Robots

cs.RO ·2026-11-13 ·Yael Fassbind, Valentin N. Hartmann, Huang Su, Yijiang Huang, Stelian Coros
similarity 0.68
Abstract · 8 pages, 5 figures. Videos and code: https://ariael21.github.io/polimop.html

Reaching a goal state in a complex environment often requires a robot to overcome challenging terrain and obstacles. Which routes are accessible depends on the robot's physical design, the control policy it uses, and how it modifies its surroundings. We present a kinodynamic rapidly-exploring random tree (RRT) planner that uses physics simulation to exploit skills encoded in the control policy, which allows it to find a path in the scene with respect to the robot's capabilities. The planner samples states from a reduced state space in 3D around the scene and expands the RRT toward each sample using policy rollouts. We guide sampling with a preplanned path for a simple mass-point model to focus exploration on promising regions leading toward the goal state, reducing planning time by up to 63%. Simulation experiments with quadrupeds, humanoids, and wheeled robots demonstrate that our approach supports drop-in integration of various robots and control policies, exploiting their physical and policy capabilities without modifying the underlying planning algorithm. Predefined environmental modifications, such as placing a plank across a gap to build a bridge, will automatically be picked up by the planner as the robot's reachable space expands.

0.24