CS Paper Radar

VLA-ULAP: Interleaving Cloud VLA Calls with Ultra-Lightweight Local Action Prediction at the Edge

Deyu Cao, Ryuji Oi, Kosuke Matsushima, Yuxuan Pan, Ziheng Wang, Daichi Fujiki, Atsutake Kosuge

cs.RO cs.LG ·submitted 2026-09-16 13:42 UTC · v2
benchmark

Abstract

Billion-parameter vision-language-action (VLA) policies run either onboard, consuming substantial power, or on remote servers, adding communication latency. To address these drawbacks and better balance latency and onboard energy consumption, we propose VLA-ULAP. It partitions inference across decision times, interleaving remote VLA calls with predictions from an Ultra-Lightweight Local Action Predictor (ULAP). A single ULAP has $\sim$7.4M parameters including the frozen vision encoder. It combines current views, proprioception, and executed action history to predict chunks in one pass. Trained independently, it requires no VLA hidden states, online verification, or server round trips. On Jetson Orin Nano, ULAP takes 20.7 ms and 0.122 J of idle-subtracted energy per inference, versus 289.3 ms and 40.46 J for GR00T on RTX A6000. Across four simulated base-policy/benchmark pairs, VLA-ULAP removes 45.3-77.3% of VLA calls while retaining 95.0-98.5% of baseline success rates at selected operating points. On VLA-JEPA, VLA-ULAP also surpasses local acceleration alternatives, using an estimated 49.4% less inference time and 51.5% less GPU energy per successful episode than ACT, and 77.5% less time and 80.7% less energy than SP-VLA at higher success rates. In physical SO-101 trials, it similarly removes 70.3-71.9% of VLA calls without observed success-rate loss at seen or held-out placements. Measured device costs imply 64.6-66.4% less inference time and 70.1-71.7% less idle-subtracted energy per successful episode at these call counts. Beyond these savings, faster responses help VLA-ULAP exceed $π_{0.5}$'s success rate by 11.0 and 15.5 percentage points (pp) on two tasks in latency-aware LIBERO-Safety simulation while approximately halving VLA calls.

Comment
Preprint

Closest papers

Nearest neighbours by meaning across the whole index.

VLA-HWBench: Where the Time Goes When VLA Models Run on Edge Hardware

cs.RO cs.AI ·2026-10-26 ·Borui Xu, Hongshi Tan, Wenqi Jiang, Bingsheng He, Ming Wu +2 more
benchmark similarity 0.73
Abstract

Vision-language-action (VLA) models increasingly run on edge devices aboard robots, where inference latency constrains closed-loop robot control. However, it remains unclear how to design VLA models, their inference software and edge hardware so that robots can run VLA inference in real time. Most VLA models report only task success, while prior studies cover limited action-generation strategies, divide inference into at most three stages, and lack comparisons of inference optimizations on the same models. Therefore, we introduce VLA-HWBench, a benchmark that measures 18 open VLA models on NVIDIA Jetson AGX Thor and AMD Ryzen AI Max+ PRO 395, with a seven-stage inference breakdown. Our study reveals three insights. First, action-generation strategy matters more than model size. It dominates 14 of 19 Jetson configurations, latency varies by $82\times$ on Jetson and $157\times$ on AMD, and parameter count explains at most 15% of latency variance. Models that generate long action chunks in a few flow-matching steps keep up with control, whereas token-by-token decoding does not. Second, kernel fusion with 4-bit weights helps most, running $π_{0.5}$ and GR00T N1.7 2.6-2.9$\times$ faster than PyTorch with torch.compile, but it exists for only these two models and only on the Jetson. Optimization also moves the time to the stages it shortens least, as CPU preprocessing grows from 12% to 39% of the GR00T N1.7 call. Third, after optimization, memory bandwidth limits only the stages that process few tokens on the Jetson, such as the denoising steps, whereas software limits all other stages, from unfused kernels to serial preprocessing on the host CPU. Overall, low-latency edge VLAs should use few action-generation iterations, inference software should extend kernel fusion and low-bit weights to more models and platforms, and edge hardware needs high memory bandwidth and a fast host CPU.

0.34

Beyond LLM Serving: Characterizing Vision-Language-Action Workloads for Embodied AI System Design

cs.AR cs.RO ·2026-10-04 ·Seonghun Jung, Sieun Moon, Jiyoung Jeong, Jimin Lee, Jaehyuk Huh
top venue similarity 0.72
Abstract · To appear in the Proceedings of the 32nd ACM International Conference on Architectural Support for Programming Languages and Operating Syste…

Vision-language-action (VLA) models translate multimodal observations into low-level robot actions. During robot operation, each control period sets an inference deadline, and overruns leave the robot acting on stale observations, reducing task success. Meeting this deadline motivates on-device or nearby edge execution, where a single robot requires batch-1 inference outside the design point of LLM serving systems. Although VLA architectures combine familiar vision-language, autoregressive, and diffusion-style components, their runtime behavior in this batch-1 control setting remains uncharacterized. We characterize four representative VLA models on an edge GPU server and two onboard SoCs, using single-inference profiling and 43,200 closed-loop episodes. Action tensor dimensionality determines whether a stage is memory- or compute-bound, platform balance can shift that bottleneck, and GPU frequency scaling yields a platform-dependent energy-latency sweet spot. In closed-loop operation, overlapping inference with action execution creates an accuracy-speed-energy tradeoff, and no configuration is Pareto-dominant across deployment SLOs. These results guide joint design of VLA model architectures, hardware, and runtime policies.

0.65

SR-VLA: Stall-Reduced VLA Execution via Predicted-Input Lookahead and Selective KV Cache Repair

cs.RO eess.SY ·2026-11-17 ·Tao Zhang, Yi Zhong, Jinhao Ruan, Yipeng Gao, Linfeng Zhong +2 more
hot direction similarity 0.71
Abstract

Vision-language-action (VLA) policies incur control stalls when inference blocks the next action chunk. Asynchronous early inference can hide latency, but its results may be inconsistent with the arriving actual inputs. Unconditional reuse risks acting on mismatched inputs, whereas full recomputation discards useful precomputation. We propose SR-VLA, combining predicted-input lookahead with selective KV cache repair. During current chunk execution, a lightweight action-conditioned predictor generates next-boundary visual observations and proprioceptive state. These predictions, together with the task instruction, drive the frozen VLA to precompute a speculative KV cache and action chunk. After real inputs are available to VLA, predicted--real differences and task conditions determine whether to accept the action chunk or trigger selective KV repair. On LIBERO, SR-VLA achieves $2.67\times$ and $1.27\times$ query speedups over the respective synchronous $π_{0.5}$ and OpenVLA-OFT baselines, while maintaining competitive average task success rates. Under target-motion perturbation, success remains baseline-comparable, with $1.52\times$--$1.93\times$ query speedup.

0.29

Fast-VLA: You Only Think Once for Robot Manipulation

cs.RO ·2026-10-15 ·Kehong Gong, Guanli Hou, Xiaoxu Zheng, Qi Wang, Mingxi Xu +4 more
code/data similarity 0.70
Abstract · 16 pages, 6 figures, 9 tables. Project page: https://garfield-kh.github.io/FastVLA

Vision-language-action (VLA) policies commonly place a multi-billion-parameter model inside the feedback loop, repeatedly recomputing task context whenever they predict a new action chunk. Yet task understanding changes far more slowly than the robot state. We introduce Fast-VLA, which invokes a frozen 4B VLM once per episode to contextualize the instruction and initial views as fixed, multi-layer key-value task memory. During execution, a lightweight online actor fuses learned time- and arm-indexed queries with current visual and proprioceptive feedback to form action queries. These queries retrieve task context from the fixed memory and predict action chunks without re-running the foundation model. Fast-VLA achieves 92.46% and 92.40% success on RoboTwin 2.0 Clean and Randomized, and 95.95% and 79.11% on LIBERO and LIBERO-Plus evaluation. Against three continually conditioned baselines on the same hardware, it reduces RoboTwin amortized policy inference time by 10.9-17.1x and requires 1.22 GiB of post-prefill online resident memory. Task-memory swaps further show that the actor relies on episode-matched task memory. These results show that task context can be established once while closed-loop control remains responsive throughout execution. Project page: https://garfield-kh.github.io/FastVLA

0.28

ActTune: Action-Aware Precision and GPU Operating-Point Adaptation for Energy-Efficient Vision-Language-Action Inference

cs.RO cs.AR ·2026-10-06 ·Zou Qingyun, Bin Gao, Wenju Zhao, Weng-Fai Wong, Bingsheng He +1 more
benchmark similarity 0.70
Abstract

Vision-language-action (VLA) policies repeatedly invoke inference to control robots, making graphics processing unit (GPU) energy a recurring cost of task execution. Reducing energy per inference call, however, may not reduce energy per successful task if numerical errors increase failures or slower inference prolongs execution. We therefore target GPU energy per successful task while preserving task success and keeping the inference-latency increase within 10\%. Our approach builds on two observations: quantization sensitivity varies across action classes, model layers, and weights versus activations; and numerical precision changes the workload, shifting favorable GPU operating points. We introduce ActTune, an action-aware framework that connects layer-wise precision allocation with workload-dependent GPU operating-point selection over requested frequency--power-cap pairs. A lightweight decision tree learns its splits and leaf precision configurations directly from configuration action errors, then selects precision before each policy call. The controller forecasts the next workload and applies the selected GPU operating point asynchronously using a lookup table calibrated under a latency budget. A shared resident quantized weight bank enables configuration switching without weight reconstruction or additional policy evaluations. On LIBERO, a benchmark for lifelong robot learning, ActTune improves mean task success by up to 2.3\% relative to state of the art. Relative to the original BF16 implementations, it delivers up to $2.02\times$ faster inference and, with GPU operating-point adaptation, reduces energy per successful task by up to 76.8\%.

0.14

Where Is VLA Inference Time Spent? Bottlenecks and Optimization Interactions Across GPUs

cs.RO ·2026-11-04 ·Muhammad Danish Waseem, Ahmed Ali-Eldin Hassan
similarity 0.69
Abstract

Vision-language-action (VLA) models map camera observations and language instructions to robot actions. However, their large backbones and repeated action generation can make inference take longer than the robot's real-time requirements for its next action. To reduce the load of VLA computations, researchers have proposed multiple optimization approaches, including quantization and pruning. These optimizations can be combined with other general optimizations such as better kernel compilation or using CUDA graphs instead of the eager mode. However, most of these optimization results are usually reported on a single GPU type, typically for a few VLA models, with no analysis of what the real bottlenecks are for a model on a particular hardware or how these optimizations would generalize beyond the reported results. In this paper, we provide a comprehensive measurement study of seven families of inference optimization methods, from CUDA graphs and compilation to token pruning and quantization, on seven state-of-the-art VLAs evaluated on four GPU families ranging from a datacenter H100 to an embedded Jetson Thor. We analyse how CPU launch overhead, memory bandwidth, and kernel efficiency jointly shape optimization gains, and how applying one method changes the benefit of another. From this analysis, we derive VLA-Triage, guidelines for stacking optimizations under latency budgets. The guidelines identify which stages can provide the required savings and which combinations need testing in the deployed execution mode.

0.20

Efficient Vision-Language-Action Management and Serving for Robot Factories

cs.DC cs.ARcs.LGcs.PF+1 ·2026-09-10 ·Dionysios Adamopoulos, Nattapol Chanpaisit, Basel Fakhri, Christina Giannoula
similarity 0.69
Abstract

Vision-Language-Action (VLA) models show high robotic manipulation capabilities via a two-stage design: a Vision-Language Model (VLM) stage followed by an Action Diffusion Transformer (ADiT) stage. Since robots must meet strict Service-Level Objectives (SLOs) for safety, VLA inference is inherently latency-critical. Meeting these SLOs requires high-end GPUs, yet weight, cost, and power constraints preclude integrating such GPUs on-robot. Prior works offload VLA inference to edge servers that serve many robots on VLA models. However, current VLA systems lack support for multi-request, multi-model execution on a multi-GPU server under SLOs, while existing serving systems for multi-stage models are optimized for throughput and stage disaggregation across separate GPUs, which are ill-suited for the millisecond-scale stages of VLA models. We design Robion, the first VLA serving and management system for multi-robot, multi-model requests on multi-GPU edge servers that meets SLOs. Our serving engine disaggregates the VLM and ADiT stages within a GPU via two streams, dynamically restricting the SMs on VLM stream so ADiT always finds SMs to run alongside it, and co-locates multiple models by sharing these streams across them, prioritizing requests by least remaining SLO time. Our management engine enables flexible model placements on multi-GPU servers, and integrates an intelligent traffic controller that maximizes per-model batching under the chosen placement while bounding each GPU's load to meet SLOs. For individual models, Robion serves on average 6.7$\times$ and 1.5$\times$ higher robot load within 98% SLO attainment over vLLM-Omni, the most widely used multi-stage serving system, and Monolithic, which runs VLM and ADiT as a single pipeline, respectively. In a large-scale experiment of serving 8 different models on a 4-GPU server, Robion can serve up to 64 robots within 98% SLO attainment.

0.36

RealtimeWAM: How Fast Can I Run My World Action Model?

cs.RO ·2026-10-07 ·Huanan Liu, Ye Li, Kangye Ji, Xiaoyu Chen, Hanyun Cui +6 more
code/data similarity 0.68
Abstract · 24 pages, including appendix. Project page: https://anonymous.4open.science/w/realtimewam/

World Action Models (WAMs) combine visual dynamics modeling with action generation, but their high inference latency limits responsive robot control. Recent efforts accelerate inference by removing explicit future-video generation at test time, as in FastWAM, an approach that requires a specially tailored architectural design. More general caching strategies exploit feature redundancy, but redundancy alone does not capture the changing computational demands of closed-loop control. To address these challenges, we present RealtimeWAM, a general, training-free framework that coordinates parallel execution with adaptive computation for low-latency inference across diverse WAM architectures. We exploit layerwise dependencies to overlap observation processing with prediction. However, concurrent branches still compete for GPU resources, limiting the benefit of parallel execution. We therefore adapt computation throughout the pipeline through selective reuse, caching observation features in visually stable regions and reusing Transformer residuals while reserving additional refinement for small predicted adjustments. We evaluate RealtimeWAM on FastWAM and OpenWAM across RoboTwin, LIBERO, and LIBERO-Plus. On an RTX 4090, measured mean inference latencies are 24.09 and 63.09 ms, corresponding to average speedups of 8.90$\times$ and 10.67$\times$. Average success rates are 82.75% and 87.41%, respectively, within 0.02 and 0.53 percentage points of native inference. Across five real-world tasks, RealtimeWAM improves average success rates over native inference by 17.2 and 37.2 percentage points on FastWAM and OpenWAM, respectively.

0.32